Extrreme in bridge does not see Express

Have an Extreme behind a Uverse residential gateway. Set in bridge mode and it provides intermet access via CAT5 to my PC and WiFi to my iPad and wife's MacBook Air. Want to extend the network with an Airport Express. Reset the Express. Connected the Express to the Extreme; Cat5 from a LAN port <--> on the Extreme to the only port on the Express (also a LAN). The light slowly blinks amber and the Express does not appear when I start AirPort. Have reset the Extreme and redone the network, disabling guest network. Am at a loss. Any suggestions? Thanks.

As I mentioned in my original post, I am using a PC, not a MAC.
Sorry about that! Regardless, whether using a PC or a Mac, the computer needs to be connected to the AirPort's network before it can access it with the AirPort Utility. This can be via either a wireless or wired connection.
There are a number of ways to get access as well. In your example of having the Express connected to the Extreme by Eternet, the AirPort Utility should have found it as well.
If you do use your wife's MacBook Air can it find tbe Express? If so, then it may be your Win7 firewall that may be preventing the AirPort Utility from finding it.

Similar Messages

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand.

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand, thanks.

What edition of LR 5? What edition of ACR does PSCS 6 contain. If they are not parallel (same edition number x in [5 or 8].x ), is LR making a tiff or psd rendition of the image?

Bridge does not see both external hard drives

In either CS3 or CS4, Bridge does not recognize my second external hard drive. Photoshop and lightroom see both drives. I am using a laptop and Windows xp.
Thanks,
mIKE

Those directories are modified in the User Preferences tab in the Setup Room.
When you've got the file tree dialogue box open, you'll need to point Color to the "Volumes" level, once there, you should see your external drive.

Bridge does not see my external usb hard drive

I have searched on this topic and the advice I've seen so far relates to when Bridge is set up to auto launch. That is not the case with me. I have Vista 32bit and CS3.
I want to move files to it and make sure the keywords are ok.
The drive is empty right now, but it should still list the drive when I click on my computer where it sees my DVD drive, right?
Thanks for the help. I started a new topic to reflect the current issue.
Holly

Disregard, I guess it takes a while? It is finally there.

Bridge CS4 Does Not See External Drive

Very suddenly, Bridge is not seeing the external USB connected driver I use to store recent photos. I read a similar message here and the writer was told to add the drive to favorites. That appeared to work for him, but I could not do that since the folder doesn't appear under Computer in the favorites section either. The drive appears in Windows Explorer. I am using Vista 32. Any suggestions?
Fran

Did you power up or connect the external drive after Bridge had been started? I've observed that Bridge only includes drives that were attached and active when Bridge was launched; it does not add a drive to its folders list if that drive is started after Bridge is active. With your external drive on (and appearing in explorer) try exiting and relauching Bridge.

MacBook Does Not See HP Photosmart C4480 Connected to Airport Express

I have an AT&T 2wire wireless & router as my internet access. Today I turned off the 2wire wireless and was able to set up an Apple-based home network with an Airport Extreme Base Station and Airport Express which I configured to extend the AEBS network. Both the AEBS and Airport Express show "green" for setup.
iTunes sees the Airport Express.
The Airport Express sees a HP Photosmart C4480 printer I have connected to it via the USB port.
- I do not have the C4480 driver installed on the MacBook.
PROBLEM: The Macbook sees the AEBS and Airport Express but DOES NOT see the HP printer connected to the Airport Express. When I go to System Preferences > Printer > Add Printer it does not see the HP and I don't know the IP address to add it. What can anyone recommend?
Thank you

Apple Tech Support solved this problem quickly and easily. In short, the USB connected printer was pointed to the computer and not the Airport Express. Here's what they ran me through:
- Assumes the Airport Express sees the printer as connected via USB
1. Open System Preferences > Print & Fax
2. Regardless of the printers you see, click the "+" button to add a printer
3. Select the Default icon
4. Check the Kind... should be Bonjour
5. Select the printer type connected to the Airport Express... the system will start to add such a printer
6. Ensure the Location is the Airport Express (mine was previously pointed to the MacBook)
-- You can change the name here is you like also such as "Kitchen HP Photosmart c4480)... recommend a different name than the original one installed so you know which one to remove later
7. Select Add
8. Remove the original printer which is pointing to the MacBook
You should be good to go.... Key points: Bonjour and Location as the Airport Express

ITunes does not see airport express speakers but airfoil does

iTunes 6.0.2 and AE 6.3
iTunes does not see the AE speakers but Airfoil does.
Have restarted AE to no avail.

Having a similar problem. iTunes 6.0.2 "sees" the Airport Express but cannot select the speakers associated with the Airport. iTunes 6.0.1 works on a Mac Mini with the same Express. Tried to re-load the system from the CDs but iTunes 6.0.2 still on

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

Suggest that you perform a Factory Default Reset as follows:
Pull the Express from power
Wait a few moments
Hold in the reset button and keep holding it an additonal 8-10 seconds while you plug the Express back in to power
Release the reset button and allow 40-45 seconds for the Express to restart
Apple's instructions to do what you want are here:
It will often help to temporarily connect an Ethernet cable from your Mac to the AirPort Express for the setup. Once the Express is configured, you can disconnect the Ethernet cable and move the Express to the desired location.
http://support.apple.com/kb/HT4259
Although an AirPort Extreme is shown as the extending device in the example, the setup for an AirPort Express is exactly the same

Airport network form time capsule does not see airport express

Hello,
I'm rather new, bought my first apple few days ago, it's great. Have been throwing away years by using the blue screen machines
I now have mac mini, today i bought time capsule and an airport express.
time capsule to make my network and the airport express to connect my stereo.
Important: I have no internet connection yet, it will be installed in 10 days.
for now i use a mobile phone connection on the mac mini.
I installed time capsule. time machine works and airport is in the air.
With airport utility i can see the time capsule, but nothing else.
it has been there for a short time, but then time capsule was gone.
i can not find the utility to start installing airport express all over. Maybe i gave the wrong WPA2 password with the first install, but can not find the software to try again.
I placed the a.expr within 1 meter of time capsule for this test.
led of time capsule is green, led of a.expr is amber blinking.
I did a reset of the a.express, no response.
I downloaded the latest a.express client, no difference.
airport is still on. it does not see the a.express.
how to proceed?
Is it only possible ONCE to setup a.express the right way? I remember answering questions which i can not find anymore.
Sorry for the long story,
hope you can help,
Rik

oh oh oh oh........ :O
Found it.... before i connected the a.express with time capsule by a wire....does not help!
Solution is to make this wire connection between a.express and mac, then it's possible to reconfigure.
After this wire everything worked in 5 minutes.
Anyway.... thanks for reading...
Rik

Verizon FIOS Network does not see Airport Express

I recently upgraded to Verizon FIOs and they replaced my Airport Extreme Base Station an Actiontek wireless router. The new Router does not see my 2 Airport express wireless stations that I use for ITunes broadcasting. I tried a hard reset of the basestations with no luck.
I also tried to connect the old Airport Express into the ActionTek. It sees the Express stations but will not connect to the internet (Although I set up for a DHCP connection, it dtill serches for a PPPoE host)
The Verizon FIOs tech support is of no help.
Please help!!!!!!!

You will need to reconfigure your 2 AirPort Express (AX) to join the wireless network provided by the ActionTek.
OR... If you want to replace the ActionTek with your AX, it appears that you will need to ask Verizon to change to the Ethernet MAC address from the MAC address of the ActionTek. Several people have reported that this is necessary.

Windows xp does not see airport express

I run an airport express as a base station in my apartment which works fine both for my iMac and my Palm pda. But a friend is visiting me presently, and her windows laptop, running XP, does not see my wifi station, although it sees others in the area. I tried removing security but that made no difference.
Is there perhaps was something that had to be ticked in the airport base station setup to enable Windows laptops to see Apple wifi? As for example when I send attachments in Apple Mail I have to tick a box to make them Windows-friendly.

I use Airport Express... two Macs and another laptop running Win XP and couldn't get the Win to see the network until I changed to a different card, a D-Link Airplus. I think it was all of $19.95 and works like a charm...
Also, in Airport Admin Utility/Network, make sure you have:
Distribute IP addresses checked and where it says; Share a single IP address using DHCP and NAT, click the pop up menu and select: Use 10.0.1.1 addressing.
Also, her Win might be picking up interference your iMac or Palm doesn't... try a different channel:
By default, the AirPort software automatically selects the best available channel when the base station is plugged in. If your base station is experiencing interference, try changing the channel it uses.
To select a different channel:
Open AirPort Admin Utility, located in Applications/Utilities.
Select your base station and click Configure.
Enter the base station password if necessary.
Click AirPort, and then choose a new channel from the Channel pop-up menu.
Carolyn
Message was edited by: Carolyn Samit

ITunes 10 does not see Airport Express because port 3689 is unavailable

I never had problems with iTunes 9 and Airport Express, but since iTunes 10 the following problem occurs regularly: iTunes starts, but does not "see" Airport Express (AE) as an external speaker. Sometimes it also loses connection after Windows hibernate mode, but that might be another issue.
What I found out is that it is NOT a firewall issue, otherwise it would not work once in a while. What I saw, though, is that TCP port 3689 is sometimes stolen by other apps like Mozilla Thunderbird (TB). I.e. if Thunderbird is started BEFORE iTunes, it might use 3689 as a listening socket. iTunes then cannot see AE until I shut down TB and restart iTunes. This is very annoying and I only found out after many weeks when watching TCP live connections in my personal firewall software.
Two questions arise:
1) If listening port 3689 is unavailable, why does iTunes not show any error message? There is absolutely no indication as to why it does not find the external AE loudspeaker. BTW, the AE config programm can connect to the hardware easily.
2) Even if port 3689 is blocked by another application, Airfoil for Windows works flawlessly with my AE. I can even tunnel iTunes through Airfoil and then listen to music in my living room, even though iTunes does not see AE. Why can a 3rd party program do something which iTunes can't?
There must be a way to smarten up iTunes and fix this annoying bug.

Nerd

Airfoil does not see airport express

I am running 10.6.8 and airfoil does not see airport express liek it used to. I am using an older version of airfoil. Any one have any suggestions so I can get my music to work through my home speakers again?
thanks

Having a similar problem. iTunes 6.0.2 "sees" the Airport Express but cannot select the speakers associated with the Airport. iTunes 6.0.1 works on a Mac Mini with the same Express. Tried to re-load the system from the CDs but iTunes 6.0.2 still on

I told my wireless network to forget two airport expresses so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. Does "forget" mean forever? How to reset?

I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?

The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress

Notebook does not see mPCIe card (asm1061)

Aloha Community,
i am using an old notebook as a small server (cups/ftp/http/etc).
The Notebook is an old Dell Inspiron 1520.
I attached three 3,5'' HDDs to it which are powered via an external PSU.
the first HDD is connected to the original sata-port.
the other two are connected to a ASMedia ASM1061 Sata-controller. This controller sits on a small mPCIe card which i fitted on one of the three mPCIe slot the Notebook offers me (i tried all three).
In Bios all mPCIe-Slots are activated, still the OS does not see the HDDs.
also lspci seems not to see the card. Any ideas?
arne in ~/ > su arne
Passwort:
+ OS: Arch Linux x86_64
# Hostname: Yoshi
### Kernel Release: 3.19.0-gbdccc4e
##### Machine Hardware name: x86_64
###### Uptime: 0:26
; #####; Packages: 1257
+##.##### Processor Type: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
+########## Root: 572G / 917G (62%) (ext4)
###############+
.######; ;###;`".
#########. .########`
#' `#
[arne@Yoshi ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
[arne@Yoshi ~]$
hope you guys can help me!
greetings
Last edited by arch-serv (2015-02-14 00:46:53)

that's the problem i guess... according to the bios settings all mPCIe slots are enabled, still the card does not show up.
arne in ~/ > lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1,9M 0 part
└─sda2 8:2 0 931,5G 0 part /
arne in ~/ > sudo dmesg | grep -i sata
[sudo] password for arne:
[ 0.511917] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 0.524037] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 26
[ 0.524043] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 26
[ 0.843388] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.843416] ata3: SATA link down (SStatus 0 SControl 300)
arne in ~/ >
even without the correct drivers the card shoud show up in the output of lspci shouldn't it?
greetings

Extrreme in bridge does not see Express

Similar Messages

Maybe you are looking for