Eye Diagram using Labview version 8.6 and Digitizer 5922

I am trying to implement an eye diagram for some analysis. I have Labview version 8.6 and NI PXI Digitizer 5922. Is it possible to do some eye diagram analysis using this hardware/software. Do I need a specific toolkit for this?

To answer your questions in order:
Yes, you can and No you don't.
Remember that an eye diagram is basically just an XY plot of one input channel against another. For example, amplitude vs phase.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

I'm trying to read some XML data from temperature logger over my network. I'm using LabView version 2009 sp1. I'm using the URL Get Document Vi. It works fine when using Internet sites like google or foxnews etc...

I'm trying to read some XML data from temperature logger over my network. I'm using LabView version 2009 sp1. I'm using the URL Get Document Vi. It works fine when using Internet sites like google or foxnews etc...
When I use it with my temperature logger most of the time I get an Error 66...but some times it does work and actually retrieves the document.
I can use the same address "http://172.22.21.68/XMLfeed.rb" (Internet Explorer or Google Chrome) in my browser and get a response every time. When accessing from my browser the server in the temperature logger does take around 6 seconds to respond, but it does respond every time.
Is the URL Get Document Vi exceeding a timeout? If so, where can I set it to wait longer?
Attachments:
Error 66.jpg ‏183 KB

It looks like the TCP Buffered Read has a 2.5 sec timeout, I believe that is where I had trouble as well. Try creating your own URL Get HTTP Doc vi in which you call URL Get Document in normal mode, with an appropriate number of characters to fetch (enough characters so that you capture all the important data in the XML file).
Attachments:
ex1.PNG ‏33 KB

Using labview version 8 can application.exe be created for linux platform?

hi
Good morning..
I have been creating GUI for windows platform using Labview version 8.
Is it possible to create application.exe for linux platform...are there any settings that could be changed to make it work on linux platform ? or it will directly work when installer is installed in linux platform...
waiting in anticipation...
Thanx ....
Regards
yogan

You must setup a machine with Linux and install LabVIEW for Linux on this machine.
If you haven't used any Windows technics you can copy the VIs from the Windows machine to the Linux machine, open LabVIEW on the Linux machine and create the application.
There is no setting on any platform of LabVIEW to generate applications and/or installers for other platforms.
Message Edited by waldemar.hersacher on 08-05-2008 08:22 AM
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

iLife '09 is not available as a download - it is only available as a purchase
iLife '11 is available as a DVD purchase and the compoments of it are available from the App Store (iPhoto '11 (version 9.1.5), etc)
Exactly what did you do? And exactly what does the error message say?
On the surface it appears that you are attemptying to open a new library with an older version (iPhoto '09 can not open an iPhoto '11 library for example)
LN

Using trial version of Lightroom and photoshop. Plan to buy. but i have a question: I have two computers a desktop and a laptop that i use when i travel can the programs be installed in both computers?

Using trial version of Lightroom and photoshop. Plan to buy. but i have a question: I have two computers a desktop and a laptop that i use when traelling. Can i download the programs on both computers?

Check the end user licensing agreement at End-user license agreements FAQ

After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

If i used cracked version of IDM and after connecting to net it shows that update available so now my question is that if i update it will IDM stop working ?

if i used cracked version of IDM and after connecting to net it shows that update available so now my question is that if i update it will IDM stop working ?

hello, this is a support forum for the firefox web browser - we can't help you with this kind of request. if you don't want to spend money on the program, use a open & free alternative like the [https://addons.mozilla.org/firefox/addon/downthemall DownThemAll!] addon instead...

Can I use Labview 2013 on 64bit and 32bit PC interchangeably?

Hello,
I am currently running Labview 2013 base package on Windows 7/64 bit laptop PC, which is not permanently kept in the lab. I need to buy a 32-bit desktop PC to operate a non-Labview application, but, it would be very convenient to use the new 32-bit machine to run Labview also, since it WILL BE permanently in the lab. Then, I wouldn't have to be connecting/disconnecting the laptop in the lab every time I am doing system development.
Can I load my version of Labview 2013 on a Windows 7/32-bit desktop system and write/run VIs the same way I currently do on my Windows 7/64-bit laptop?
If the 32-bit and 64-bit are interchangeable, then, I would get a higher end 32-bit system. If they are not, then, I will get the cheapest 32-bit system available, and dedicate it to the non-Labview application.
Thanks,
Dave
Solved!
Go to Solution.

dav2010 wrote:
I am currently running Labview 2013 base package on Windows 7/64 bit laptop PC, which is not permanently kept in the lab. I need to buy a 32-bit desktop PC to operate a non-Labview application, but, it would be very convenient to use the new 32-bit machine to run Labview also, since it WILL BE permanently in the lab. Then, I wouldn't have to be connecting/disconnecting the laptop in the lab every time I am doing system development.
You seem to be confusing a few things.
A typical PC can run either a 32 bit windows or 64 bit windows 7. The 32 bit version can only support up to 4GB of RAM, while the 64 bit does not have this limitation.
Both versions can run 32 bit applications and most applications are still 32 bit. (In contrast, a 64 bit application cannot run under a 32 bit OS).
With respect to LabVIEW, a typical installation uses LabVIEW 32 bit, independent of the bitness of the OS. (There are very few specializes scenarios where 64 bit LabVIEW is even useful). I assume that your LabVIEW is 32 bit on your current 64 bit PC. Is this assumption correct?
With the current RAM prices, and keeping memory upgrades in mind, it does not make a lot of sense to even install a 32bit OS (except maybe on a cheap netbook). 64bit Windows can run 32 bit applications just fine. Are you sure that your special application is an exception here?
In any case, VIs are freely interchangeable between LabVIEW 32 and 64 bit (and even mac and linux). When moved to a new platform, they simply recompile automatically.
dav2010 wrote:
Can I load my version of Labview 2013 on a Windows 7/32-bit desktop system and write/run VIs the same way I currently do on my Windows 7/64-bit laptop?
If your version is Labiew 2013 (32 bit) (and I assume it is!), you can run it on both systems. If you are currently using LabVIEW 64 bit (unlikely), you need to install LabVIEW 32 bit on the 32 bit machine. Even in that case, theVIs are fully interchangeable.
LabVIEW Champion . Do more with less code and in less time .

I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!

I have upgraded to Yosemite and also updated the iPhoto application to version 9.6. I am no longer able to send a photo from iPhoto via email. I get an error message saying the server is not responding. But, when using the same server in Mail, I can attach the photo and send it. My wife is using the older version of iPhoto and it works fine.
I have checked the settings for the outgoing server, etc. and the Mail settings match those in iPhoto.
Could this be due to either the Yosemite upgrade or the iPhoto upgrade?

This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
https://appleid.apple.com
Click "Manage Your Apple ID"
Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
Click Password and Security in the left column
Click Generate an app-specific password
Enter iPhoto as the name of the app
Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
And...voila' (I hope)

Battery management system design for EV to monitor and to balance the Li-Ion cells' voltages using LabView, NI myRIO-1900 and LTC6804-2 IC

Hello,
I have NI myRIO-1900 and LabView 2014. I need to design a Bettary management system to monitor and balance the rechargable Lithium-Ion battery packs' voltages and charges using LTC6804-2 IC. I am facing some problems to program the IC for monitoring and balancing the cells' voltages and charges using LabView via NI myRIO. Can anyone help me to design this by giving some references and technques.
Thanks in advance.
Mohammad Hoque
[email protected]

Hi Mohammad,
I believe with EPS you can monitor the cells' voldates and charging. I'm not sure what you mean by balancing, though. Can you elaborate a bit more?
Thanks.

Using Firefox version 29.0 and want tabs below toolbars. Any ideas?

I am one of those users who prefer the tabs below the toolbars. In version 29.0 there does not appear to be any solution to getting them there. I have searched all the menu bars and gone the route of changing browser.tabs.tabsontop to false. Nothing has worked so far and I'd hate to load an older version of Firefox just for tabs. Has anyone else used version 29.0 and solved this dilemma successfully?
Thanks for any help or advice...ahava1313

For around 4 years now I have had to train and show many hundreds of people how to make forefox work properly with addon features like Tab mix plus and how to put there tabs below so they could improve there work productivity becouse they just didnt know any better way existed. '''With over a million people now having downloaded the new classic restore addon in order to get just ONE FEATURE "TABS BELOW" It defies logic that the Firefox Developers either dont know how to use a browser properly or dont care. '''They are sheep following Internet explorer and google down a black hole of stupidity. I use Firefox becouse its different and its able to work the way I like with TABS BELOW. Firefox 29 lasted aproximately 5 minutes before I went back to FF 28. I would happily use FF 29 but ONLY if tabs are below. This should not require an addon. Tabs below should be the standard and it would be the defining feature that makes firefox stand out. The inability to have tabs below is the very reason I Dont use other browsers. If a petition to get tabs below is made just how many signatures do we need to get the developers to listen. What does it take for the developers to listen to its users. I just dont get why this has gone down the path of becomming more and more like crome and internet explorer both of which I utterley hate becouse I cant put tabs below and organise things in the same way I have always been able to do in Firefox. Where has the difference gone. May as well rebadge as "crome clone" or "baby IE". '''Please listen to your users and fix this issue as some of us do know a better way and its TABS BELOW '''

Using LabView version 6.1, Best way to capture data every 5 milliseconds

Best way to capture data every 5 ms (milli-seconds) in the .vi diagram when using "Time between Points, and Small Loop Delay tools"

I have no idea what "Time between Points, and Small Loop Delay tools" is. If this is some code you downloaded, you should provide a linke to it. And, if you want to acquire analog data every 5 milliseconds from a DAQ board, that is possible with just about every DAQ board and is not related to the version of LabVIEW. You simply have to set the sample rate of the DAQ board to 200 samples/sec. If it's digital data, then there will be a problem getting consistent 5 msec data.

Can I use ASUS VM60-G072R Desktop (like mini Mac) with my iMac all in one computer? I need to use Windows version of QB and I don't want to buy a PC tower or laptop.

I need to use the Windows version of Quickbooks Pro and I don't want to use Parallel or buy a PC tower or laptop. Can I use ASUS VM60-G072R Desktop (like Apple Mini) with my iMac all-in-one computer?

Thank you Kappy. I guess I have to decide to purchase a separate monitor and keyboard for this mini PC computer then. And also find extra space in my office. I'm happy you answered my question so quickly.

Getting Error 08 when attempting to build exe using LabVIEW 2009 (32 bit) and Windows 7

Testing development platform on Window 7 vs XP. I received following message while building an executable using 2009 32 bit on Windows 7 machine. Same build will work on an XP machine.
Error 8 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2009\errors\Internet Toolkit-errors.txt
Any suggestions?
Thanks

For any who may be having this problem here is a little more information and what I did to get around the issue. (so far)
First I tried a simple vi with a while loop in a project and made an executable build. This worked. I double checked on an XP machine the project that I was having problems with. The executable was built successfully. I changed back to the Windows 7 machine. On the program compatibility trouble shooter I started the LabVIEW 2009 (32 bit) in the XP service pack 2 mode and selected run as administrator. The build was successful.
Note: was logged in as administrator and program would build a simple executable in Windows 7. The executable that would not build had more complex code that included serial communication and calls to lvanlys.dll and nilvaiu.dll.
This may not be a complete fix to the problem but at least in this one case it worked.

Opening event for Excel or Word using Web versions of Excel and Word

Is there an event or other messaging that can be caught and handled when a Word, or Excel file is selected and open using the web version of Word or Excel? At that event I want to access the OOXML file for the selected Word or Excel file and get data from
it.
Thanks
Jim

Hi Jim,
As far as I know, Opening event for Excel or Word is not exist in the Javascript API for Office.
Unfortunately, I could not find such a document.
>> At that event I want to access the OOXML file for the selected Word or Excel file and get data from it.
For a workaround, I will recommend you add a function to get the data from the file in the Office.initialize event.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Eye Diagram using Labview version 8.6 and Digitizer 5922

Similar Messages

Maybe you are looking for