Eye TV and SKY

Do Elgato Eye TV make a box that works with SKY's Freesat service?
I bought an Eye TV 410 a few months ago and it did not receive a signal. I was told that I needed to upgrade my aerial to a digital one in order to receive a freeview signal. (BTW a regular freeview box did not receive a signal either). I live in E2 in London so there is definately a signal here.
When I found that sky do a freesat service that is equivalent to freeview for a one-off payment of £150 that looked the way to go. A bargain compare to the £250 quoted for an aerial upgrade.
My question is does Elgato Eye TV make a box that works with SKY's Freesat service?

Hi
If the EyeTV takes a Video signal input.. you can plug your video into it
and record/watch off it then yes SKY will work with it but limited.
Limited to you can only record what your watching and unlikly to
use a timer record option with it.
your 250 Aerial quote is a rip 0ff around here its around 100-150 pounds.
(but then your in London)
Another cheaper option go buy an indoor aerial thats wideband that should
grab a signal.

Similar Messages

Can anyone help with iPlayer and Sky Mobile?

Ok, I'm so close to giving up with this useless phone. There are 3 apps on my N97 which give me a constant headache.
BBC iPlayer
Sky Mobile*
YouTube
*I should point out that I only use Sky Mobile to set recordings on my Sky+. I do not use it for, nor have any desire to use it for actually watching Mobile TV.
All of these apps work absolutely fine over my home WiFi network. It's when I try to use them over 3G (my Vodafone Live! connection) that I start running in to trouble.
All 3 give me connection problems, errors, and simply refuse to load half the time when on 3G. I got so annoyed I just did a hard reset the other week, and magically all three started working again. However, now 2 of them are failing me again. YouTube (touch wood) is working fine at the moment, but iPlayer and Sky Mobile just aren't.
iPlayer sometimes works. But sometimes I get script errors (unable to load content), and sometimes it says something about checking my connection settings. I wouldn't mind but it's not actually possible to access any options for the iPlayer. Even in application settings there are no options you're able to set.
Sky Mobile simply flat out refuses to work ever on 3G. But it did after I did a hard reset for a couple of weeks, now it just stopped working! It wont even load. It just gives the error message 'Unable to connect to network - please check connection settings" or something along those lines.
I've tried so many different things. Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live! all the time, tried setting my video streaming settings to WAP, all sorts. Every combination I can think of.
I just can't wait to get rid of this phone. I've put so many people off buying one. They see it and think it's all swish and cool, and I just say 'Don't. You'll regret it'. I can't wait for my contract to be up so I can upgrade to an iPhone now Vodafone have got them.
Can anyone help with these problems? Thanks in advance, but I don't hold out much hope...

About iPlayer.
Have a chat with Vodaphone. Streaming iPlayer over 3G IS allowed on Vodaphone contract, unlike my O2 contract. As long as your contract allows it, and you have the correct AP address, it should be fine. Vodaphone should be able to give you the setting.
Mine only works over Wlan.
FWIW, "... streaming over 3G is not currently available on iPhone handsets on any mobile network".
p.s. Just to be clear. You say "Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live!".
iPlayer uses the Nokia browser "Web". So that's where you should make the setting "Ask when needed". It should then offer you the choice of whatever you've set in Destinations> Internet> then select whatever you've chosen as your GPRS connection.(as advised, or sent to you by Vodaphone).

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description:          Dell Wireless 1397 WLAN Mini-Card
IP Address:          192.168.0.118
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Tue Apr 17 16:59:28 2012
Lease Expires:          Wed Apr 18 16:59:28 2012
DNS Servers:          192.168.20.254
                    192.168.30.217
Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description:          Broadcom NetLink (TM) Gigabit Ethernet
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Vodafone Sure Signal and SKY Fibre Optic Broadband

Please help, I have had no Mobile Phone signal for over 6 weeks on four mobile phones at home (which we pay over £150 a month for!) including my two teenage daughters phones who are beside themselves!!My Vodafone sure signal box was working fine (for past two years or more)but stopped working when we switched to SKY Fibre optic broadband from regular SKY broadband I have spoken to Vodafone and SKY for many many hours but still no signal. I'm tempted to ditch both SKY and Vodafone and start fresh with BT!!, this would be such a shame as been with both companies for over 15 years now I have no idea what I need to do to fix this, we have tried Port Forwarding but still no signal. Please help, I am in a mobile blackspot and its driving me cand the family mad.

Although not specifically about Sky Fibre, this (although a bit technical) is an interesting read (in particular the post at 21-Oct-14 10:41:23 advising to de-register the SS via the VF website, wait 30 mins then re-register the SS using a different postcode and if no luck contact VF and ask them to reset the SS from their end). For what it's worth, the Three Home Signal Box works fine over Sky Fibre without any port forwarding or any nonsense - just plug and go - worth knowing if you should decide to switch mobile providers!

Hotmail and Sky Email on Ipad

Hi All
I like to keep emails of invoices on my Ipad/Iphone from Play.com etc. I cannot create a folder for them on my Ipad. Am I missing something? I cannot get the folders created on the Hotmail website or Sky email to show on my Ipad so I can move them to it.

One can't create mail folder on the iPad's Mail app. For IMAP mail accounts you can create mail folder on webmail or a computer and sometimes they show up on the iPad. If you have a POP3 mail account any folders you crate elsewhere will not show up on the iPad. You HotMail and Sky mail accounts are likely POP3 accounts.

I have sky tv and sky unlimited BB does anyone know if I could use ATV to access Sky Anytime ?

I have sky tv and sky unlimited BB does anyone know if I could use ATV to access Sky Anytime ?

doubt it very much
can't think of any feature added to atv's which was not relevant to Americans
and they have their sports thingy and netflix all ready
same deal with iplayer from bbc it's only there using airplay

Slow Infinity speed on Xbox, PS3 and Sky despite h...

I have recently switched from Sky to BT and have a BT Infinity 2 package. My computer is working well and achieves a very good speed - 76Mps down. I am delighted with this. However, despite all my devices being 'hard wired' via ethernet I am getting very slow dowload speeds on my xbox, ps3 and Sky HD box.
Sky Anytime + Takes over an hour to be ready to play an SD movie
Iplayer constantly buffers on PS3 and Xbox
A 56mb File on Xbox live takes 10+ minutes to download (dread to think how long a large file would take!)
I have tried swapping the ports and cables and have tried resetting the homehub. There are no faults on the line and I have had an engineer look at the installation.
I am now very frustrated as when I was with sky on an 8mb connection I had no problems at all with all my devices.
Does anyone out there have any ideas? I would be really grateful them as I am thinking of going back to what worked!
Thanks

Hi Welcome to the forums
Here are some help pages done by CL Keith http://forumhelp.dyndns.info/speed/adslmenu.html
also post your full hub stats by entering 192.168.1.254 into your web browser address bar and navigate to adsl or use a-z, if netgear enter 192.168.0.1
Can you also post the full results from BT Speedtest speedtester.bt.com
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Eye strain and monitor types

Hi folks,
first of all, i am a big fan of IBM/Lenovo T series thinkpads
Last week I bought a used T500 (22434EG) 15,4", 1280x800, and after using it for a few hours, i get eye strain and headache. My previoius machine was a T60 (1951FEG) with 15,1" 1024x768 and i could use it for days without any issues. I works in IT business, so i spend a lot of time with my computer.
Are there any further infos about these two monitors? I would like to compare them to identify what type of monitor/notebook sholud i buy, that fits my eyes. (I read a lot of PWM, LCD displays, LED/CCFL backlits)
The T500 monitor type is LEN4050, connector type: LVDS, device type: LFP, gamma : 2,2
I dont have any info about the T60, because i dont have it anymore. (I am working on it to get it back.)
Thanks,
Gellert
Solved!
Go to Solution.

Just suggesting if you have not already done so.
Increase color dept to 32bit? or reduce to 16 bit?
Increase refresh rate to 60Hz? or reduce to 50Hz?
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Retina Display MacBook Pro eye problem and strain

Hi, the name is Ben
Recently, I boought a retina display and have since been having noticeable eye problem.
(strain, fatigue, oversensativity to computer monitor/screen ligthing)
My question was, has anyone been experiencing the same.
I use my computer pretty much all day, since my work/studies are all based on it.
Still, after 2 weeks of using retina display macbook pro, I have rapidely seen my eyes
starting to hurt, being oversensitive to computer monitor (not that I can't use any, but am
very sensitive to any lighting and need particular moderation in usage)
Now true, there ARE many good habits I did not know of before,(see some examples below)
that I am trying to adopt but still (reducing only in part the problem), I must say I am rather worried,
since I have never had any similar problem in 5 yearsof using my previous 13", macbook, mid 2007.
Any commments, or suggestion (constructive of course) would be welcome.
(few examples of of good habits I have tried so far)
as regularly standing (/30 min),
look at something far away for 20 second (/20 min), blinking regularly, closing eyes for a moment,
adjusting lighting in work environnement, buying an antiglare film or device (nushield) , adjusting screen position,
not working to close to screen, using bigger fonts

an hour on my MBP by itself (someone else's office, a hotel room, an airplane, my lazy sofa) and my eyes lose the ability to focus --and I'm toast.
Ok, I'll explain why.
First off your iPad and iPhone screen is smaller, thus doesn't reflect as much as a larger display will.
Your other displays are in a static environment where you have reduced the glare or it's been reduced just by chance.
When you take the glossy screen laptop to another location without adequate environmental features to reduce glare imposed (no overhead lights, closed windows, low light etc.) on the screen, thus your getting eyestrain from the glare.
It's caused by the slightly out of focus reflections verses the screen image, your eyes are automatically refocusing between the two images.
Your solution in this matter is to apply a anti-glare film to the laptops glossy screen, unfortunately it's going to cost money and be replaced often as it gets dirty, dries out and peels at edges etc.
Ideally a anti-glare matte screen would be the choice in the first place. I use my Mac for 12 hours a day, 7 days a week and don't have the eyestrain problem anymore.

BT Infinity, HH4 and Sky On Demand

<reposted from original in BT Sport>
Has anyone managed to successfully connect a Sky+HD box by Ethernet to the BT Home Hub 4?
I keep getting Local Network and Internet FAIL on the Sky Settings>Network menu (Reset and Manually configure).
According to Sky the router has to be LLC-based for multiplexing. Does anyone know if the Home Hub 4 (or HH3 for that matter) is LLC-based?
I have connected my old ADSL2+ Netgear router locally by Ethernet to the Sky box and this is recognised in the Settings>Network page as a local network (the Netgear is LLC-based by default).
This is very puzzling because the Home Hub 4 did connect with the Sky Box momentarily at the first attempt. Sufficient time to designate a static IP Address and Mac code exchange. Since then it is not recognised.
I have tried ..
enabling DHCP on the HH4
putting the Sky Box address in the DMZ
disabling the firewall
rebuilding the Sky Planner
system reset of the Sky Box
manually configuring the Sky Box (192.168.1.76; 2555.255.255.0; 192.168.1.254; 192.168.1.254) for IP, Mask, Gateway, DNS.
All to no avail ...
Orwell only got the date wrong ...
Solved!
Go to Solution.

Hi DS,
I tried that but I think I am looking in wrong place as LLC-based is a configuration of ADSL.
The problem appears to be on the network routing side rather than the modem.
The Netgear defaults to an address range of 192.168.0.2 - 192.168.0.254
The HH4 defaults to 192.168.1.64 - 192.168.1.253.
Perhaps the Sky Box expects the range offered by the Netgear?
I there any technical reason why I cannot configure the HH4 thus ...
Gateway: 192.168.0.1
Network Range: 192.168.0.2-192.168.0.253
Orwell only got the date wrong ...

Problem with elgato eye tv and IMac movie languages

I live in switzerland and we have same movie in tv that we can choose the languages Italian or English.
I have the elgato eye tv Hibrid and I have a problem whith the languages. When we have movie that you can choose the languages the the Mac and the Elgato spooke simultaneously with both languages. One audio in Italian and the other audio in Inglish. How can I choose only one langueage?

Also, note since you are running 10.6, it can't be on a PPC Mac. 10.6 only runs on Intel Macs.

Apple TV and Sky HD

Hi guys,
I was just wondering, is apple tv compatible with sky hd i.e. are you able to plug a sky HD cable in the back and watch hd tv through apple tv on your telebox?

AppleTV is not a satellite decoder or terrestrial digital decoder.
It's a 'media extender' that lets you play things you have in iTunes via your TV (for video this assumes a fairly strict compatibility with what AppleTv can play).
You could plug a Sky feed into any number of non-Sky satellite boxes to watch free to air channels. With a HD capable box you could watch any free HD feeds but having bought a Freesat HD box a few weeks ago just to get a bit of HD feed for my plasma I have to say that the BBC HD service which is all that's effectively available at present (unless you want a high def luxury shopping channel) is not up to much at only about 4 hours of content per day, most of which is of no interest to me.
What we really need in the UK is for the SD broadcasts to be transmitted at decent bitrates - the BBC HD feed is downconverted to view via SCART on my Humax box and the downconverted SD picture is vastly better than the SD broadcasts.
We are getting awful SD digital transmissions that are nowhere near the quality of the SD source material available.
AC

Help w/ Eye Diagrams and Mask Tests

I could use some experienced help here
So i have a scope capture of a representative signal that will be used in this VI.
I have several problems which i could use some help with.
1) Trying to create an EYE diagram out of this waveform. Because it is repeating i have already have the algorithm to chop it up into seperate 'waveforms', how would i go about displaying something like this as an eye diagram with the LV graphs? I have tried everything i can think of, i cant just use build waveform or hardwire anything because the # of Voltage arrays will differ every time in real usage.
What i did is create a waveform chart, i build a waveform type w/ dt and the Y values and plug it in. I was hoping to use the 'scope' setup as from the description in help seemed to do what i wanted, but it does not seem like it overlays onto the graph.
Basically i need a way to create a multiplot graph from X,Y coordinates and dynamically increment the number of plots until its done. Hopefully that makes sense.
2) Eventually i also need to do a multi part mask test on this 'infinite persistence' signal if you were. This shouldnt be too hard as i will have the arrays of voltage at my disposal from above that i can loop through. My question regarding Mask tests is this, for this particular mask test there are 4 actual masks. An upper & lower and 2 'eyes' that it must clear, it seems LV's express mask testing only lets you do a top/bottom mask.
What would be the best way to do mask tests like this? Use the express VI and split it into 2 parts and 'and' them together? Or would doing it more manually with some of the non express mask stuff prove to be easier?
I got many more questions but i'll stick with that for now Thanks in advance!

Here they are... Note that in the SubVI I use an interpolate 1d that is available in 8.0. I do that to stretch the points out some.
I would also suggest taking a look at http://forums.ni.com/ni/board/message?board.id=170&message.id=183506&requireLogin=False
Attachments:
Calculate Intesity Array.vi ‏72 KB
Eye Diagram For Forums.vi ‏2993 KB

White Balance - Eye Dropper and Monitor Calibration

Does the eye dropper correctly set the white point even if the monitor is not correctly calibrated? I do calibrate monthly with the XRite but I'm not sure that the calibration is perfect.
I use a grey card, and the eye dropper in LR. So even though I calibrate - must the monitor be correctly calibrated for the eye dropper to work?
... and now tell me what monitor you love for photo editing. Thanks

Thanks for this answer,
I am using a Dell LCD monitor and have been happy with the color, but can not get skin tones right in my prints, they look washed out after I do a grey card white balance. So I just ordered a Eizo CG222WBK, now I'll only have myself to blame if my images don't look right
Dan

Color Management - Different Lab-Values in Eye-One and PS4

After having calibrated my screen "Eizo" and my printer Epson 3800 for - in this case paper Tecco PL285 carefully, I reached almost exact the same Lab-values, as I checked the monitor profile, printer profile and messured the printed output with Eye-one - (Monitor-Profile, Print Profile PL285, Result Photoprint) see table below. Colorprofil ICC was Adobe1998 in all cases. My monitor is calibrated with Kelvin 5500, Gamma 2.2 and brightness 120.
BUT my question is - as I messured the colors direct in PS4 with the pipette (Photoshop messure), the Lab values were very much different. Can anybody explain me the different or tell me where to adjust ? - A pure "human-eye-control" with my eyes saw the colors as almost being alike, but trying to be perfect - I will be happy to learn about/solve this.
Best regards
JanBoss
TestChart
1-1
1-2
1-3
1-4
1-6
2-1
2-3
3-6
4-1
4-4
L
a
b
L
a
b
L
a
b
L
a
b
L
a
b
L
a
b
L
a
b
L
a
b
L
a
b
L
a
b
Photoshop messure
92
-1
7
80
0
5
66
0
3
48
-2
6
10
-1
4
21
14
-49
42
61
42
74
20
64
35
24
23
39
-16
25
Monitor-Profile
87,5
0,7
-5,0
77,0
0,8
-4,9
63,2
0,7
-4,9
46,5
-0,6
-1,4
13,2
-0,3
-2,2
21,2
12,5
-53,0
40,2
58,4
32,6
71,2
19,5
55,3
33,7
22,0
16,2
37,7
-14,0
18,6
Print Profile PL285
87,6
0,7
-5,2
76,9
0,8
-5,1
62,9
0,7
-5,1
46,2
-0,7
-1,6
12,9
-0,5
-3,2
20,8
11,0
-53,8
39,9
58,8
32,0
71,3
19,4
56,8
33,1
21,9
16,5
37,2
-13,9
18,4
Result PhotoPrint
87,5
0,7
-5,0
77,0
0,8
-4,9
63,2
0,7
-4,9
46,5
-0,6
-1,4
13,3
-0,4
-2,1
21,2
12,5
-52,9
40,2
58,4
32,6
71,2
19,5
55,3
33,7
21,9
16,2
37,7
-14,0
18,6
Monitor/PhotoPrint
0,0
0,0
0,0
0,0
0,0
0,0
0,0
0,0
0,0
0,0
0,0
0,0
-0,1
0,1
-0,1
0,0
0,0
-0,1
0,0
0,0
0,0
0,0
0,0
0,0
0,0
0,1
0,0
0,0
0,0
0,0
Print Profile/ PhotoPrint
0,1
0,0
-0,2
-0,1
0,0
-0,2
-0,3
0,0
-0,2
-0,3
-0,1
-0,2
-0,4
-0,1
-1,1
-0,4
-1,5
-0,9
-0,3
0,4
-0,6
0,1
-0,1
1,5
-0,6
0,0
0,3
-0,5
0,1
-0,2
Photoshop/PhotoPrint
4,5
-1,7
12,0
3,0
-0,8
9,9
2,8
-0,7
7,9
1,5
-1,4
7,4
-3,3
-0,6
6,1
-0,2
1,5
3,9
1,8
2,6
9,4
2,8
0,5
8,7
1,3
2,1
6,8
1,3
-2,0
6,4

Hello,
Set the rendering intent to absolute colorimetric in Photoshop's color settings. Otherwise, everything is stretched from L 0 to L 100.
Regards,
Yann

Eye TV and SKY

Similar Messages

Maybe you are looking for