Eyedropper picking up gradient but not custom angle

Hello,
When I have a box/shape with a gradient and a custom angle, which I created using the gradation tool, the eyedropper picks up the gradient, but not the angle. I have checked the eyedropper preferences and it is checked to pick up everything.. Is there a way to get the eyedropper to also have  it grab that custom angle.
thanks!
babs

Using the eyedropper tool on the run is a great asset using the graphic style is as well on a complex job or if you have been away from the project for a while.
For the Op it would be good to at least mark Kurts Response as helpful it is not a point thing but rather a way for other users to determined where to look for the answers to the same question if this is confusing them as well.

Similar Messages

  • HT3180 My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

    My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

    Was the restore done via iTunes?
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
    If so then you may need to take it to Apple.

  • File is picked by XI but not placed in Receiver

    Hi All,
    Im working on file to file scenario, i hav done with the design and configuration.The problem is the file is been picked up by the server but it is not placing in the receiver folder.Im using NFS but no content conversion is been done. I have specified all the parameters nd the channel is active.
    When i do Message Monitoring in RWB im getting a msg stating "No messages Found" and in the Adapter Monitoring both the communication channels are working fine but with the receiver channel it says " No message processing until now".
    One more thing in SXI_CACHE, there is a error unable to refresh cache contents.And in Integration Directory, when i do cache notifications, it shows not yet started. Is there any services that has to be started wrt ID???
    When i do cache notifications for ID nd look for problms im getting an error saying Could not parse communication channel and cache elements are not refreshed in SXI_CACHE. Plz suggest wht has to be done.
    Can anyone help me....
    Thanks,

    Hi,
    File name and Directory names are spelled properly.
    Sender and receiver coomunication channel are in green status in RWB( Adapter Monitoring)
    Cache has been refreshed using SXI_CACHE and it shows "cache contents are up too date".
    But when i do Adapter Engine refresh, i cannot see any adapters which are been used.
    When i do testing using SXMB_MONI and evn RWB im gettng msg stating" No messages are found".
    Plz suggest wht else can be done.
    Thanks,

  • File picked up XI but not placed in receiver

    Hi All,
    Im working on file to file scenario, i hav done with the design and configuration.The problem is the file is been picked up by the server but it is not placing in the receiver folder.Can anyone help, where to look for such files . Is there any folder on the server where such files are placed???
    Thanks,

    Hi,
    In ID goto Environment and in that click cache notification,there u will have the refresh button. refresh the ID and if u have changed any thing in IR and ID do the same thing.
    In ur system the objects are not changes are not geting activated.Do it and if u still get probelm update the thread.
    Regards,
    Phani
    Reward points if Helpful

  • Problem in Print Program, picking JECS value but not maintained

    Hi,
    I have a report for Invoice Printing.
    My query is related to Item conditions that in one item we have not maintained JECS condition of 3% but when we are printing the program, that is printing Education cess 3%.
    This is done by the user mistake, because when we maintain JECS condition for 3%, the same output will be shown.
    But in my case, user forgot to insert this condition. After that printout showing the Education cess 3%, but in VF03, respect to that line item conditions there is not maintained JECS condition.
    Pls guide..how it is possible..
    Regards..

    comment these lines in ur program & see
    w_ctrlop-no_dialog = 'X'.
    w_compop-tdnoprev = 'X'.
    control_parameters = w_ctrlop

  • Flash page works in Safari but not in Firefox

    I generate my web pages using LR. When I launch my pages on Safari they look great but on Firefox the slideshow portion is sized MUCH smaller. I have attached the page herehttp://www.8aphotography.com/Interior_Photography_Page/index.html. Please check out on both Firefox and Safari to see what I mean. If anyone can give guidance that would be much appreciated.

    I figured it out. I did not have a </div> at the end of a group of text I added. Funny how Firefox picked it up but not Safari.

  • In Address Book, why does Apple let you create custom fields in the Template cards but not have them available for importing?

    I open Address Book, go into Preferences, select Template and under the Names field (friend, assistant, father, etc) I add a custom field called "Principal".
    I also add two more custom fields in the Email area.
    Quit Address Book then relaunch. Add a new contact and the new custom fields, Principal, etc. are there. All good so far.
    I have a Now Contact file with about 200 contacts in it. I export all fields as a Text file, Tab delimited. No problems there. With Address Book launched, select Import, pick the text file, leave Text Encoding on Automatic and click Open.
    The window that shows the fields for Address Book and fields for the text file side by side opens. This is where you match up the correct fields for importing. If I go to one of the fields from the text file that I created a custom field for, click under the Address Book heading on the Do not import, scroll thru the Apple choices of fields, none of the custom fields show up. Only the original Apple ones are there. Why does Apple let you create them in the Template area but not have them available for importing? Does anyone have suggestions on getting around this?

    While most likely not of interest to you, Spotlight can also tell you where the files it finds are located
    Hover the mouse pointer over the name, and press Command-Option and the path to the file will be displayed.
    As for opening a terminal session in the directory where a file is located, there is Applescripts that do just that as well as specific features in Lion/Mountain Lion terminal:
    <http://stackoverflow.com/questions/420456/open-terminal-here-in-mac-os-finder>
    <http://hints.macworld.com/article.php?story=20110729034827358>
    <http://www.macworld.com/article/1047793/folderinterm.html>
    <http://www.macworld.com/article/1161876/open_finder_folder_in_terminal.html>
    <http://www.macobserver.com/tmo/article/os_x_lion_open_a_folders_location_in_term inal>

  • Custom F4 help in a BSP application working in Mozilla but not in IE

    Hi,
    I have created a custom F4 help in a BSP application.
    It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
    Can someone please suggest a possible solution for this?

    Hi,
    See simmilar discussion in thread /thread/1883519 [original link is broken]
    I think this may be helpful for you.
    Thanks,
    Chandra

  • Custom Ringtones Show Up in iTunes Folder, but Not on iPhone

    I've recently upgraded from a 3GS to a 4G. I have a few custom ringtones that I created from .MP3 files (converted to .m4r files). I had these same ringtones installed on my 3GS and want them on my 4G.
    I transferred to my 4G by dragging them from the Windows folder to the iTunes device folder. The 5 ringtones show up in iTunes under the Ringtones folder. Only one of them shows up on the phone as being transferred.
    I had done this a couple of days ago, and noticed then that only one ringtone was being shown under Custom Ringtones on my phone. Tonight, I uninstalled them all, rebooted my phone, and then re-dragged the files as per above. Again, all show up in the folder on the iPhone in iTunes, but one shows up on the phone. This is now a different one than a couple of days ago.
    Soooo... what can be causing this? The files are apparently on my phone, but not appearing in the usable list. I need some help in resolving this. I've looked through these forums and seen similar issues. There doesn't seem to be a 'proper' way to do this. I manage my phone manually, and have not done a 'sync' with the ringtones as they show up in the folder... (I don't really see the need to sync if they're appearing in iTunes as on the phone).
    Thanks!

    Hi
    having the same problem with my both devices.
    already have custome ringtones and wanted to add more, followed the instruction and now i have them in iTunes under the Ringtones section.
    my devices are iPhone 4 and using OS 4.21
    during the sync i saw that the ringtones are added and they appear under the ringtone selection under the device info, however they do not appear on the device after sync.
    any help??
    by the way, i have read all the previous messages and i cant find any ringtone folder under iTunes folder

  • I cannot download my adobe creative suit 5 design premium because it says my serial number is invalid but Adobe customer care said it valid...i don't understand why it still not working??

    I have upload my Adode Creative Suit 5 design premium on my first apple mac pro successfully.,i purchased in a retail shop few year ago...!as it have two use of the CD when installing ..i'm trying to install it on my other apple mac pro..but this time it is say that the serial number is not valid..i got it checked by Customer care, they said it is valid and should be working when set up on my laptop..can someone pose help as i don't know who to turn now to find answers...many thanks
    Kind Regards

    Hi Rich,
    The cause of this can be multiple. First of all be sure you use the original CD + serial. In case of a download same story. Try to find out if the installed version match the language of the serial (they need to match). Last but not least: Check if you use a upgrade version, if so it might be needed to fill 2 serials.
    Can you share a screen of the error (please hide the SN )

  • How to create a custom control of a button where the look will be applied to all others but not the Boolean text?

    Hi all
    I would like to create a customized button as a master so that if I change the look of the master all other buttons will change too.
    I have done this with a custom control as a "strict type def" otherwise the look will not change BUT If I do this as a strict type def I cannot change the Boolean text anymore which should be different on every button.
    How can I create a master control of a button where the look will be applied to all others but not the Boolean text?
    Stay Hungry, Stay Foolish
    Solved!
    Go to Solution.

    Steve Chandler wrote:
    I don't think you can do that. I just looked and as I suspected the Boolean text property is read only for strict typedefs so you cannot use property nodes to change the text.
    As a workaround just make it a typedef. When you want to change the look open the typedef and make it strict, make your changes, then make it non strict again. You will have to update the Boolean text again for all instances. Kind of a pain. Maybe this is something for the idea exchange.
    Kudos for being sneaky.
    I like these creative work-arounds!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Scale maintained in info records but not picking up in scheduling agreement

    Hi,
    We have maintained scales for PB00 in info record (subcontracting), this scale is picked up in Subcontracting Purchase Order.
    But when we are trying to create Subcontracting scheduling agreement, this scale is not picked up by the system.
    Why the system is picking up scales for PO but not for scheduling agrmment?
    Regards,

    Hey there,
    Please check your InfoUpdate Indicator on the scheduling agreement.
    The indicator determines which prices and conditions are suggested in future PO items.
    Prices and conditions can apply to an entire purchasing organization or to a single plant within a purchasing organization.
    For example, if you create a purchase order for a plant for which an info record has been defined at plant level, the purchase order is based on the conditions in the plant info record and not on the conditions that apply to the purchasing organization.
    probably your info record is at the Porg level and not at the plant level and hence it's not picking it up.
    Hope this helps,
    Cheers,
    Dhaval

  • BPM was Picking two files but it was not processing 2nd file data in target

    Hi all,
    I have designed scenario for picking two files and i want to merge this files into single structure and send it target.when i am try to testing my bpm was picking two files but it is processing only file it went target system.i have steructe for source like
    source1     target
    root        header
    a           item 0 to unbounded
    b            a
    c            b
                 c
    source2     item1 duplicated structure
    a            a
    b            b
    c            c
    i am getting two source files with the same structure but i have to map it one target structure and i want to map both source fileds to one target structre under item node so i was duplicated item node and mapped a b c fields from both(2 source structures).while testing BPM is picking two file bu in the target i am getting only first file data under item node,whatever i mapped with duplicate structure with second file i am not getting into target file(target is standard proxy structure so cant' create new one item node in that occurance is 0 to unbounded thats y i duplicated node while testing interface mapping its working fine).can anyone suggest solution for this problem.
    Thanks,
    Seshagiri.

    Hi,
    In BPM follow the below steps and hopefully your problem will be solved.
    1.     Configure one sender CC to get the files from your application server, once the files hit the BPM now you need to
                         configure your BPM accordingly.
    2.     Use the Receiver step in BPM to receive the messages. Use the correlation step to get the correct files.
    3.     Use container and append the files, so both the files will be append, this means the message content will
                         have 1header, body, footer, 2header, body, footer.
    4.     If you want to split the message to different receiver then use the fork step else leave it.
    5.     Use the transformation step, the transformation step will call the message mapping. Provide the correct message
                         mapping.
    6.     Now use the sender step to send the message to the receiver-target system. In this step use the split value for each
                          concept if you want to generate two different files.
    7.     Configure 1 receiver CC to generate both the files.
    Hope this helps.
    Cheers,
    Jay

  • Payment terms based on specific dist.channel, division and Plant but not from customer master.

    Dear All
    I have a requirement,
    Generally payments terms from customer master will flow to sales order. but here my requirement is to get a different payment terms based on specific distribution channel, division, customer  and plant those are there in sales order but not from customer master. is there any user exit or functional module to fulfill this requirement, or any other suggestion appreciated.
    Thanks,
    Reddy

    This Problem you can solve without user exit too.
    The Customer master data itself can solve the problem.
    You can maitain diffrent Payment Term as per the sales area (Dist.Ch+Div+S.org) of customer master.
    and each sales are wise u can change the plant also.
    You just need to set your logic with the combination of sales are and plant. And need to assign which payment term should determine to sales order.
    If you are rasing sales order with X sales area relavent to that payment term will trigger.
    Hope above logic will work, otherwise you can go with user exit.

  • File Sender channel polling successfully  but not picking the files.

    Hi All,
                    Can any one please provide any SAP Note  Or any Alert mechanism for the  File Sender channel in case where the XI channel in polling successfully at a particular folder from Source System  but not picking the files. Thanks in Advance for the solution.

    Hello,
                  If you want to know the reason for failure in picking up the file ,You can check the MessagingSystem monitoring for the reason behind failure.
    http://host:httpport/MessagingSystem/monitor/monitor.jsp
    For Alert may be you can follow prateek instructions.
    HTH
    Rajesh

Maybe you are looking for