EyeTV keeps asking for admin login & password!

I have EyeTV 3.1 installed into my iMac and, as my daily account is a standard user account, everytime I close EyeTV it asks for an admin login and password.
How do I solve this please?
Thanks in advance!

Hello MREnder,
From what I am reading, you may need to call in to get a factory reset done. These resets can only be done over the phone. You can find the number at eprintcenter.com under the support section.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

IMac is asking for admin login password upon startup when it never did before, settings are still on auto login. Why is it doing this out of the blue?

iMac is asking for admin login password upon startup when it never did before, settings are still on auto login. Why is it doing this out of the blue?

Is sounds like it might for some reason booting into Safe Mode, which does prompt for a password.
Try a PRAM reset:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that doesn't help, restart holding down the option key which should take you to the startup manager. Select Macintosh HD (you may need to use the arrows on the keyboard if the kb is Bluetooth), tap 'enter'. Does it boot normally now?

Why does mavericks keep asking for my login password?

why does mavericks keep asking for my login password?

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Product number CQ183A can not access setting in EWS keeps asking for admin login and password.

HP Photosmart 5510d B11H
CQ183A
Windows 7, Vista, and Linux
I installed the printer everything works until I try to access certain settings in the Embedded Web Server. I pops up a box asking for admin login. Initially, the status page claimed the Admin password was set even though I never set that up. Through chatting with tech support rests cleared this, it is now reporting Not Set. However, I still can not login to check/change settings etc.
I think this printer had been purchased then returned to the store because the manual was missing. I downloaded the manual and did not find any mention of how to access the password settings. So far tech support has not been able to answer my question,
Is there a default?
How do I access the EWS settings -> security to setup a password?

Hello MREnder,
From what I am reading, you may need to call in to get a factory reset done. These resets can only be done over the phone. You can find the number at eprintcenter.com under the support section.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Continually asked for admin login/password

Hi
recently my Macbook has started to routinely (three or four times an hour at least) to ask for my admin details.
Pop up says that needs this for following when click on Details;
Keychain - system.keychain and Application - pubsubagent system.keychain.
Anyway to stop this from happening ?
TIA
John

Have you launched the Keychain Access utility program and done the usual "Keychain First Aid" and/or deleted any Expired Certificates you find under the "View" Menu?
It's possible that one or more keys is corrupt and needs to be removed. It will get replaced after the access password gets used again.
I'm grasping at straws here. It seems like some automatic login is getting triggered by using your system or a program, and the keychain information is not 'sticking'.
You might check your System Preferences/Accounts/Login Items to see if there is some type of program running in the background that might be trying to log into a server or something like that.

Can't create a folder without being asked for a login password.

I'm running 10.9.5 on an iMac. When I try to create a folder I'm asked for my login password. When I try to move a file into the folder I'm asked again for my login password. This is very annoying. My other Mac running 10.4.8 doesn't do this.

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

Why it is keep asking for Username and Password but i didn't use any username and password with my database.

Why it is keep asking for Username and Password but i didn't use any username and password with my database. Please help me i m very frustrated right now please help anybody. I m new in this.,

Hi,
Please check below threads:
Crystal Report Layout asking for Login Info
SAP B1 ask for credentials to print or to preview Crystal Reports report

TS1292 I bought a 4 pack of $25 Itunes gift cards and only 2 will activate. For the second two it just keeps asking for my login. No error message just keeps repeating the login

I bought a 4 pack of $25 Itunes gift cards and only 2 will activate. For the second two it just keeps asking for my login. No error message just keeps repeating the login. Is there any way to fix this or did I just lose $50

Report this here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

Apple support article:
Mail Keeps Asking for Password
Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/20549403#20549403

Keeps asking for my hotmail password and saying its wrong stopped recieving mail

keeps asking for my hotmail password and have stopped recieving mail

Mail asks for your password when it cannot contact the Server. It presumes [usually incorrectly] you told it the wrong password, and asks for a better one. The one you enter replaces the one that is stored.
But often the reason it cannot connect is that the Mail Server holding your emails is temporarily DOWN.
Ignore those requests and take that account Online again later.
(You may have to re-enter the password, because it often clobbers your good password with the one you enter, and sometimes does not store ANY password after that stupid dialog box.)

In Yosemite, I can;t operate for more than a few minutes with Keychain or Safari asking for my login password. How can I turn this off, and still be safe?

Using Yosemite, I an't seem to work for more than a few minutes without being asked for my login password. Keychain wants it, Safari wants it, iCloud wants it..the list goes on. Then in 10 minutes or so, they all want it again. Passwords are being stored by Safari as usual, but new tabs or pages bring up the request. How can I turn this off and still have protection?

Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

Printing from InDesign asking for computer login password

Hi. Just got new MacPro, CS4 Design Premium. Every time printing from InDesign asking for computer login password. Never happened with CS3. Is there any way to avoid job holding in printer's dialog box, waiting for authentification? No problems printing from Acrobat, Photoshop or Entourage etc. Checked computer preferences, nothing shows permission/security restrictions are applied. What could cause holding print jobs from InDesign?
Here's what it says in Status field: On Hold (Authentification required)...so I have to click “Resume” every time, enter password and only then it prints.
Printer: HP5100 laserJet. HP did not associated this issue with printer or drivers. Please help. Thanks!

Thanks for your help, Marvin!
Sharing has been set up, PW is in keychain. Still asking for "authenification"..
After talking to Adobe tech support, here's the answer:
"Issue: When attempting to print, customer is continually asked to authenticate.
Resolution: Printer is possibly too old to understand the print data InDesign is outputting. Try updating drivers or using a newer printer".
I guess I will request new printed from management, mine is 2003...

I'm having a problem where Firefox keeps asking for my Amazon password, even though I tell Firefox NOT to remember this password. In Firefox options, Amazon is clearly listed as a site for which not to save passwords.

I'm having a problem where Firefox keeps asking for my Amazon password, even though I tell Firefox NOT to remember this password. In Firefox options, Amazon is clearly listed as a site for which not to save passwords.

Do not use [[Clear Recent History]] to clear the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

POP3 -Keep asking for user name & Password

Hi,
We have exchange 2003 server with Service pack 2. We have user who check their mails through Outlook 2003, Outlook web access & some users are using POP3 to download the messages.
Since last few weeks, we are getting the complained that when engineers are trying to configured users account in Outlook with POP3 configuration, its keep asking for user name & password. But with same user name & passwords user is able to check their mail through Outlook web access.
In some of our site, users are able to download messages through pop3 account but this account was configured long back.
Kindly advise.

HI,
This is happening mainly when
1. user changed his password through Outlook web access next time its keep poping up for password & it will not accept the new passord.
2. if user is using OWA & when we try to configured his mail in Outlool with POP3 .
See if i remove exchange attributes from user's account & then delete the users from AD & Recreated with same user name, Password & reconnected to that user to his old mailbox, it;s work fine.
Regards,
Chetan
POP3 is enabled by default for all the users.

I cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

i cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

I read a way on another forum to fix this problem. Right click on the setup.exe and select "Run as administrator" this should solve your problem.

EyeTV keeps asking for admin login & password!

Similar Messages

Maybe you are looking for