EYETV WIRELESSLY OVER NETWORK Please help!

Hi
I have a wireless network at home with a old windows xp system directly plugged into the router (Netgear dg834g), and a power mac g4 and macbook running wirelessly.
I also have an EyeTV Terratec T2 wireless unit for watching digital television.
It plugs in through usb is there a way i can plug the unit into either the windows machine (preferably) or the powermac g4 and then hijack the usb connection to the macbook and watch tele through the macbook?
The Tv unit is great but its a right pain all the wires and having to be near a tv point in my house, as i am 90 miles away from the digital transmitter and the small aerial that came with it is just not good enough for that.
Thanks for your help
Nick

Are you using a switch or a hub, I would try finding a crossover cable and hooking the two units directly together, that will tell you if it is the network, or one of your machines
I just reread your post, since you say it works fine (on your mac in bootcamp/xp) maybe there is a buffer setting on the media player
How are you connecting to the nas, SMB AFP, NFS?? maybe try a different connection setting. I would guess its not hardware related, since your using the same hardware (hub, computer etc) and it works in bootcamp/xp.
Message was edited by: eschw95458

Similar Messages

My appstore wont let me download anything. It says i have to agree to the terms and i agree and again it pop up the same thing over and over! Please help me

My appstore wont let me download anything. It says i have to agree to the terms and i agree and again it pop up the same thing over and over! Please help me

I thought i was the only one!! but its happening on my ipad! and i dont even want to try on my iphone uhhh its annoying!

Tried to download TV series from ITunes. . All I get is: download error. Tap to retry. Repeats over and over. Please help!

Tried to download TV series from ITunes. Most ok, but 4 will not download. All I get is: download error. Tap to retry. Repeats over and over. Please help!

If you sync with iTunes on your computer - connect the iPad to your computer and launch iTunes. Click on the iPad name on the left side. Then at the top of iTunes go to Store>Check for available downloads. See if the TV shows will download there and then sync them to the iPad.
If you don't sync with iTunes, try signing out of your account, restart the iPad, sign in again and then try to download the shows again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to download again.

HT4623 how to get started connected with laptop with net connection but announcement is to try using wifi ,try again over mobile please help me

Sim card inserted in a new iphone 4s but iphone is not activated and announcing try using wi fi or try again over mobile please help?

You can only sync to one computer/iTunes library. To make this your syncing computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

I have the new iPhone 4s. I'm using cloud. I try to sync my playlists to my phone an it either erases them completely or keeps saying it cannot move all music files over? Please help. Also my purchased ringtones will not sync up as well.

I have the new iPhone 4s. I'm using cloud. I try to sync my playlists to my phone an it either erases them completely or keeps saying it cannot move all music files over? Please help. Also my purchased ringtones will not sync up as well.

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

Can't connect my Ipod Touch 2nd gen to home wireless network - please help

I have just received a 2G ipod touch today and it will not connect to my home network. I have a SKY Netgear router with numerous devices wirelessly connected with WPA security. I have input the shared network key when my Ipod asks for a password but it will not connect (even if I am stood next to my router). I just get "Unable to join the network .........". I have tried connecting via the 'other' network route but still the same result. Please help.

Here's a few things you can do to get to the bottom of the problem:
- Have you ever connected to a public hotspot? The only reason I ask is this will rule out hardware problems. If you are not close to anything, download and install the free app WiFinder from the app store. Once you have the app installed, you see what networks are around you. If nothing is working, contact Apple and either visit the Genius Bar or return it Apple.
- If you have disabled encryption in your router and you are still be prompted for a password, you need to tap on that network name and tap Forget Network. And to really make sure everything is cleaned out, go to Settings > General > Reset > Reset Network settings.
- After your iPod restarts, use WiFinder to find your network. WiFinder will tell you whether or not you have encryption on or off and the type of encryption used. If it is still off, just tap the Connect button. If you have turned it back on, go to Settings > WiFi > Other network and enter your network name. You will be prompted for your encryption scheme and your password. WPA and WPA2 should have a password entered. WEP should have the hex key entered.
- If you still can't connect, I would check and reenter my password. Passwords are case sensitive.
- Assuming you have connected, tap the blue arrow (>) next to your network name. You should see your IP address, subnet mask, router IP address, and DNS router addresses, you are good to go.
- If you have an IP address of 169.x.x.x, your router is not supplying an IP address. Recommend router settings are:
SSID - on
DHCP - on
MAC filtering - off
Encryption - on and set to WPA or WPA2
DNS - automatic from ISP
Let us know what happens.

Very Odd Problem connecting to network please help

Ok so I have had my Macbook Pro for a while and I have both an Airport Extreme and an Airport Express in my room. So until recently I could turn on my computer and my Airport would automatically connect to the internet. Now recently I turn on or open my computer and I can still see my network but I cannot connect to it. I have restarted all the devices and my computer, but the only thing that eventually logs me on (after anywhere between 5 minutes - an hour) is waiting. But the second I close my laptop I will get booted off the Internet and I cannot connect again.
However I can still see the network I just cannot connect to it.
Also another problem I have noticed is that when in Network Setup Assistant it asks me for the password for the network, and I have entered this password many times in my life for my iPhone and for my other devices. And yet recently when I input the correct password (ive tried over 100 times) I get a message saying that the password is incorrect, when I know for a fact that I am putting the right password in.
If anyone could please help me I would be very grateful.

The Airport Extreme base station has 2 passwords, one for logging into the router, the other for your network access (assuming you have security switched on). Just make sure you are trying to enter the correct password (I know this sounds obvious and no offense is meant).
If you added the Extreme to your other router, make sure in Airport utility the Extreme is set to Bridge Mode, this will remove any incompatibility issues with 2 devices trying to obtain IP addresses from your ISP. Only one router should connect to your ISP, using password, username and relevant settings, the other is a bridge for your internal network allowing faster transfers between devices connected to say for example your extreme.
I have a Netgear DG834PN modem/router which is assigned control to connect to my ISP (as it is a modem, the Extreme Base Station isn't a modem). The Apple Extreme is connected through ethernet to the Netgear. I have all my 802.11g/b/a devices connected through the Netgear wireless network (2.4Ghz) and all my 802.11n devices connected through the Apple Extreme Base Station wireless network ('n' only @5Ghz). I also have my Mac Pro and my AppleTV connected through gigabit ethernet (through the Extreme ethernet). Everything works well. AppleTV and Mac Pro sync very quickly, my MacBook Pro connects to other computers or devices (AppleTV for streaming content) within the Apple Extreme network, wired or wireless, and allows fast transfer speeds, especially with no g/b/a devices slowing things up.
I also have a USB hub connected to the Extreme with USB printer attached and additional external storage connected, both available throughout the Extreme network to either wired or wireless devices.
It sounds a bit complicated but it is really easy to do.

Connecting to a wireless print server, please help!!!

i have a canon mp500 connected to a network through a wireless printserver and wireless router. the printer works when directly connected to my macbook, but not when connected to the print server. i contacted linksys and they sent a docment on how to set the printer up using it's ip address. still didn't work (the instructions were for 10.1 and 10.2). i have downloaded and installed the current mac os x drivers from the canon website with no luck. please help

I'm no expert, but I was able setup HP printer connected wirelessly to AEBS by using Apple's Printer Setup Utility and Bonjour. I was, however, able to install the HP drivers using the software that came with the printer, but it sounds like you could not do so with Canon?
Anyway, here are Apple's help files for adding an IP printer:
"Connecting to an IP printer
An IP printer is a network printer that uses TCP/IP protocols (such as LPD/LPR, IPP, or Socket or Jet Direct) to communicate with your computer. If the IP printer you want to use is not listed when you print, you can add it to your list of available printers.
To add an IP printer, you need to know its IP address or DNS name. See your network administrator for assistance.
Open the document to print, and choose File > Print.
Choose Add Printer from the Printer pop-up menu, and click IP Printer in the dialog that appears.
Choose the appropriate printing protocol from the Protocol pop-up menu.
Type the IP address or DNS name for the printer in the Address field.
If your printer requires it, type the queue name for your printer in the Queue Name field. If you don't know the queue name, see your network administrator for assistance.
Enter a name and location for the printer, so you can identify it in the Printer pop-up menu.
If the Print Using pop-up menu does not display the name of your printer's model, choose the item appropriate for your printer from the Print Using pop-up menu, and then select your printer in the Model Name list.
Click Add.
Usually, your computer can detect whether a printer has special accessories installed, such as additional paper trays, extra memory, or a duplex unit. If it can't, a dialog appears that lets you specify them. Make sure the settings in that dialog accurately reflect your printer's installed accessories so you can take full advantage of them."

More Wireless issues..please help

I have Infiniti2 and HH3. I used my 'old' draytek vigor 2710 as access for upstairs wireless. All well till few weeks ago. HH3 wireless is still strong, but I cannot connect to it? Strange. So, I changed various passwords and evem reset to original default as well as WPS to my ipad, laptop, iphone and galaxy all to no avail. Obviously the HH£ is broadcasting the signals well. Yet when I try the BT FON signal presumably from my own hub it connects?? There must be some protocol problem here. I am getting a bit cheesed off....I suppose a 'lazy' option would be to pruchase the alternate routers and such as te TP ;nk suggested? but what a waste of a new HH£??
PLease help a newbie in need.
Thanks

zleon wrote:
Thanks for quick response. I have tried different password solutions including wps, each time after resetting on the hub and web resetting too to the default, but with no positive result so far. Any more ideas?
And as I mentioned above, can you confirm that you've removed the connection attempts on the devices - not just the hub
You would need to navigate to the wireless settings on all wireless devices, look for any saved connection attempts and select 'forget network' or something similar.
-+-No longer a forum member-+-

Airport Extreme setup problems on existing WDS network - Please help!

I just bought a Time Capsule and have setup a WDS network for the house. The Airport Express joins the network just fine as a remote WDS device. I cannot get the Airport Extreme (v5.7) to join the same network. It just continues to make a *separate network with the same name* despite the Channel being the same, the WDS being set to remote, and the main ID of the Time Capsule has been put in correctly. In other words, since I setup the airport Express correctly, I cannot figure out for the life of me why the Airport Extreme is not joining correctly.
PLEASE HELP. I've been trying this for 6 hours now and countless total restarts by hard resets of all the equipment.

Hello arthung. Welcome to the Apple Discussions!
Let's double-check your WDS setup ...
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs for each of the base stations to be used in the WDS.)
o Perform a "hard" reset on the Time Capsule (TC) and a "hard" reset on the 802.11b/g AirPort Extreme Base Station (AEBS).
Main Base Station Setup - TC
o Click the AirPort status menu in the menu bar and choose the wireless network created by the TC.
o Open AirPort Utility.
o Select the TC, and then, choose Manual Setup from the Base
Station menu.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the AX.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - AEBS
o Click the AirPort status menu in the menu bar and choose the wireless network created by the AX.
o Open AirPort Utility.
o Select the AX, and then, choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.)

Wireless not working , please help .

well ive been having this problem for a while with my linksysE2000 for a while . it wont let my ps3 connected wireless and when it does it stays for a while then it disconnnect after 1 hours . sometimes my wife is strong and stay for a whole day and then othere sdays my wifi doesnt even want to work please help what should i do ?

So the main concern is only with the wireless connection? You might need to adjust some wireless settings in the router.
Please check this link to see if this will help:
List of common issues with Linksys wireless-N routers

Losing my wireless connection? Please help!

I just installed an airport card (the original) into a G4 powerbook (gigabit ethernet model) and I am only periodically able to connect to the wireless signal at the local coffeeshop and at work. The signal goes in and out. I have been able to make a consistent connection on other macs at these sites so I know it isn't a problem with the signal. I am running OS 10.3 on the G4. Any ideas what my problem might be? Please help. Very frustrated. Thanks.

It sounds like your antenna connection to the airport card is loose. The connection should have been very firm with a noticeable click when the plug was inserted.
This issue has been brought up many times in this and other forums.
You also need to make sure that the antenna cord hasn't been pinched or damaged during the card's installation process.

BlackBerry z10 can't get access to mobile network, please help!

Hi, i got my unlocked z10 a few days ago and still i can't get access to mobile network. Only wifi have worked for me till now.. i used the same sim card as my old phone (where i i got access fine). I've tried rebooting and switched every setting on and off etc. Could any one please help me with this..

Since you are using the same sim I suggest you contact your service provider to check your provisioning.
Let me know if this help.

Need help changing PC to sync over wifi please help!

Hello im having an annoying problem im wondering if someone can help.. I recently purchased a new latop (running windows 8 OS)..i used to sync my iphone 5 (running latest OS on iphone) over my other pc.. I want to be able to do this on my new pc but i cant find where to change the computer on my phone or thru itunes. It still shows my old PC to sync to shaded out because well its plugged into my new pc... ive restarted my laptop/router/phone nothing is finding my new PC..I cant find any information on where to change the information on my phone so it will sync on my new computer.. please help!

Hello,
You're right, you don't want to create your site as images.
What you need to do is learn HTML. Fireworks can produce an HTML
table of sliced images, but that table usually breaks if you try to
replace an image of text with actual text, so it isn't a great way
to go to produce a site.
So...resources! Here's a book I like:
HTML,
XHTML, and CSS, Sixth Edition (Visual Quickstart Guide) by
Elizabeth Castro
It covers everything in small chunks and is light enough to
carry around and read.
Some tutorials:
HTML Code Tutorial
W3Schools
This one has a friendly tone, although it has lots of ads:
Page
Tutor
The CSS Tutorial
Also, check out the site recommendations by Silkrooster here:
A
question about using Fireworks to build a website
Once you know HTML, what you do is use Fireworks to design
your site. Then, you slice and export what needs to be an image and
use Dreamweaver to build your HTML and CSS.

My iphone 5 cant find my wifi network please help me

hello i
my iphone5 cant find my wifi network any more.please help me

there is nobody to help me ?
really i'm so tierd ..if someone knows about this prb please let me know

EYETV WIRELESSLY OVER NETWORK Please help!

Similar Messages

Maybe you are looking for