EzDrummer not showing up in channel strip

Hey guys, I'm running Logic Pro 8 and I just installed EzDrummer on my computer and im having a trouble getting EzDrummer to show up in the channel strip. At first it wasn't even showing up in the AU Manager then i done all of the updates and now its says its successfully validated. Any help would be greatly appreciated!
Valdi

It's an instrument - click and hold on the slot directly under "I/O" in the channel strip. You'll find it under AU instruments.
!http://web.me.com/johnalcock/filechute/EZD-I.O.png!

Similar Messages

Record enable isn't showing on my channel strip for when i want to record audio

file:///Users/waltertimperley/Desktop/Screen%20Shot%202013-12-28%20at%208.23.36% 20pm.png
file:///Users/waltertimperley/Desktop/Screen%20Shot%202013-12-28%20at%208.23.36% 20pm%20(2).png
file:///Users/waltertimperley/Desktop/Screen%20Shot%202013-12-28%20at%208.23.31% 20pm%20(2).png
file:///Users/waltertimperley/Desktop/Screen%20Shot%202013-12-28%20at%208.23.31% 20pm.png
these are the screen shots of my problem need help as its a mahor pain in the ***
i create a track as per always its say record enable but does show on my channel strips
its will only record enable midi and i cant record using my mic

Hi
A quick look around this forum will show that you are not alone.... some issues with LPX10.0.5 (and possibly OSX 10.9.1) and USB audio devices.
CCT

Saved user patch not saving aux send channel strip settings?

Hi all,
I was reading the 'Using and saving patches" article in the manual and came across this quote:
"patches also save any aux channel sends that are needed to reproduce the complete patch,"
I was extremely excited and tried to create my own patch. My User Patch saves, and the aux send amounts are in the main channel strip, but the actual bus channel strips are not created.
I noticed that other logic patches actually create the bus strips with their predefined settings when you load them, but I can't seem to get my user patches to do this. Am I missing a step when I save my patch?
Thanks in advance!
Robert
P.S. - if it's useful, I am using Logic 10.0.7 on OSX 10.8.5 on a mid-2012 15" MBP Retina

Just thought I might bump this topic since I have the same problem. Any suggestions on a solution would be greatly appreciated!
Tedd

Does not show 4 audio channels

I was using final cut 4.5 and cutting videos (lots of videos and almost done) and then we realized the audio track is showing as mono and not 4 channels as it is supposed to be. So, yesterday we upgraded to 5.1 and when opening the file, it still does not show as a 4 channel audio but if i import the same video again it shows as having four audio channels.
So my question is, all the work that i have already done on the videos, is there any magic command in Final cut that can make the videos appear as having 4 audio channels since the original video has four channels?
Hope it makes sense
Thanks

When you load a clip in the viewer, do all four tracks appear in the timeline's target buttons? did you before? All four have to be connected to the 4 tracks in the Sequence when you make an edit if you want all four tracks to appear in the timeline...
You could perform a match frame if all four tracks are really in the clips, and then overwrite the same shot to itself with all four tracks connected in the targeting buttons pretty fast or use the replace edit command to maintain any transitions you've added.
Jerry

Logic remote for iPad not showing all mix channels

When i use my ipad with logic remote app I will pull up a song and the mixer view within logic remote and it will only show some of the mixer channels...I will swipe right and left to find all the others channels but they are not there...Does anyone know why this is? For example I pulled up one song and i went all the way over the the left on the ipad mixer channels and it only allowed me to view the aux channels and a couple of other channels but i wanted to mix the main vocal amongst other tracks, and they were no where to be found withing logic remote...

Well, I still have this issue with Yosemite and iOS 8.1. It is over a year! Adding 8 empty audio tracks to the top brings the tracks into view but they are not the correct colour as the track meters and colours are offset by 8 channels.
This topic was ridiculously difficult to search for. I couldn't find it after I logged in and the site sent my iPhone to the rss feeds page. Why? I did not get to this topic result until I got to the word "showing" after typing in the topic from my now logged out iPhone. Again. Why?

Photoshop CC is not showing save "Alpha Channels" to be checked!

This hasn't happened before! As in... it didn't happen as recently as yesterday.
I have a 3 layer image, 2 of them with a large transparent area. I will be importing this into After Effects.
It allows me to check "layers" but not to preserve the transparency. "Alpha Channels" is greyed out.
When I import into AE, even in the media browser the transparency is gone. The transparent area is now black. Ditto when I drag it into the composition canvas.
Mode = RGB, 18 bit
When I import the files from yesterday that *did* preserve the transparency, they still keep the transparency. So I know it's not a problem in AE.
This is where it gets super weird. When I take yesterday's file, open it, and try to save it under a new name -- TODAY IT DOESN'T ALLOW ME TO CHECK "ALPHA CHANNELS".
What have I done to take this option away?

HOLY CRAP -
Indeed, I did not have that.
So I added a channel, and it automatically showed up as Alpha 1...... and my whole image turned red.
When I turned off the image channel, it went back to normal.
Am I possessed?

CPC Assurance - Not showing E1 CAS Channel status

Hello, I'm evaluating Cisco Prime Collaboration Assurance but I have some information on performance graphs that are not shown the right information, on E1 CAS Channel status, all channels are shown as idle, and I'll like to know what could be wrong with this or if some configuration could be missing to graph this data. Look at attached files.
Running CUCM version 9.1.2.12900-11, configured as H323 with Voice Gateway.
CPC Assurance version 10.5.0.49471(51383), patch version 1 installed
Any help that could help will be appreciated.
Regards,
Juan Carlos

This could be the cause.
Just try that. Also, which browser u are using ?If possible, try IE if Mozilla is being used.
Further, whencall is active , just run show isdn service in router and then, check status in Prime.
https://supportforums.cisco.com/document/12021121/monitoring-current-call-volume-gateway-using-cisco-prime-collaboration
regds,
aman

Communication Channel Monitoring not showing up Communication Channels

Hi All,
PI 7.1 : I have created Communication Channel using File Adapter in ID and activated it. Adapter engine is Central Adapter Engine. But in Runtime Workbench I am not able to see communication channels created under Component Monitoring -> Adapter Engine -> Communication channel Monitoring. Please let me know what is the problem.
And in ID I am getting below warning message for that Communication Channel.
Message: Unable to Check Whether Communication Channel is compatible with selected Adapter Engine since version information for Adapter Engine is missing in SLD.
Any idea? I appreciate your quick help.
Thanks,
Carl

Hi Abhishek,
I have selected inID , File dapater software component SAP BASIS 7.11 name space http://sap.com/xi/XI/System, adapter "file " is in that name space in ESR. In ESR there is only one BASIS Software Component SAP BASIS 7.11.
Thanks,
Carl

JDBC adapter type not visible in Communication Channel

Hi All,
I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

Hi Kuldeep,
Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
Check below links also
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Sender JDBC adapter : data read from db but not in PI
Regards
K.N

HT201199 When I drop an mp3 into the channel strip, nothing happens...when I drop a caf it shows "not compatible"

When I drop an mp3 into the channel strip, nothig happens. when I drop a caf it shows: not compatible... so the playback doesn't work.

http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=preface %26section=0

3rd party plug-ins are not displayed in channel strip audio unit insert

I have successfully loaded several 3rd party plug-ins (Wave Masters and IK multimedia Studio Bundle) into my MacBook Pro. The files are shown in Library>Audio>Plug-ins>Components, in User>Downloads, and they appear in my Audio Unit Manager (for each the box is checked for access from Logic Pro). Yet, when I go to a channel strip to launch some of the plug-ins, the product does not show up under audio units. How do I get these plug-in files to the insert list for my audio channels? Unfortunately, I need to launch these plug-ins in order to authorize them with the vendor. I must be missing a key step, but I have not had this issue before with other 3rd party plug-ins. Thanks for any direction.

Also, I know in the case of my IK Multimedia Classic Studio Reverb, it will NOT be available from within my 3rd party plug-in list, on a MONO channel.
I need to be opening the list on a stereo track (or stereo Aux), in order to be able to select those plug-ins.
See if it's something that simple...

Logic Pro 9 - MOTU MK II inputs not available in channel strip

I usually use a MOTU 24 i/o as my main Logic Pro 9.1.5 audio interface. I'm trying to use a MOTU MK II and it is connected via firewire. It shows up fine in the Logic > Audio > core audio driver preference and is checked on. However the MKII in/outs are not available on Logic's channel strip inputs and outputs. Logic still shows the 24 i/o's even though the 24 i/o is not selected in audio preferences and is not even turned on.
I've reinstalled the latest MOTU drivers, trashed Logic's preferences and restarted my MacPro but it is still the same. Only the 24 i/o available in the channel strip input and output.
Is there a second audio i/o setting that I'm missing?
My Mic is registering OK in the MKII so I know it is getting a signal.
Thanks,
Richard

For some reason Logic is listing the 24 i/o inputs.
I've renamed the 828 Mk2 1 & 2 inputs to Vox 1 and Vox 2. The MK2 has 8 analog inputs plus two mic/line inputs for a total of ten audio inputs, not 14 as listed in the channel strip input drop down.
Audio registers in and out of the Mk2 but does not register in Logic's channel strip input. I just switched back to the 24 i/o to test and audio registers fine in Logic's channel strip input with the 24 i/o. Just not with the MK2 selected as the audio source.
I'm curious if anyone else has had this problem or if I'm missing an audio input setting somewhere.
Thanks,
Richard

LP 9 NOT DISPLAYING EQ or INSERTS ON OUTPUT CHANNEL STRIPS

This is odd: Logic is not displaying EQ or Inserts on some of the Stereo Output Channel Strips. Instead of "Output 1 - 2" I have a "Master Output" with no EQ or Inserts. When I check the other stereo output strips I find that only one (output 7-8) is displaying properly. How can I fix this?
Thanks!

The output is turned on, yes. This is a session I did in Logic Pro 7 and opened in LP9. Again, as I said, OUTPUT 3-4, 5-6 also do not show up properly. Only Output 7-8 shows up w/EQ and Inserts showing.
I've opened several other LP7 sessions in LP9 and not had this problem. LP9 refuses to see the output (1-2) correctly.
When I turn off "Master" in the mixer window (upper right corner buttons), nothing changes. When I turn off "Outputs", the Master disappears.

LPX channel strip presets missing (but L9 Legacy strips are showing!)

Hi Guys,
I would be grateful for any advice on something that seems to have gone a little wrong with my LPX installation...
Prior to installing LPX, I removed Logic Pro 9 completely (using instructions from Eriksimon to ensure that all L9-related folders had been removed). I then went ahead and installed LPX, including the "Legacy" downloads to support L9 settings.
I now have a strange situation where the LPX channel strip presets are not showing up in the "Setting" menu found at the top of each channel. However, they are showing up when I show the Library view!
In both views, the L9 "Legacy" settings ARE showing up!
I've taken some screen shots to better illustrate what I am seeing:
1. Here's what I see when I click on the "settings" button of a channel. I've gone into the subsequent menu levels just to show what comes next.
The concern I have is that in that first menu, I am expecting to see the channel strip "categories" for LPX, but all I am seeing there is a single "Legacy" category (containing all the L9 presets:
2. Here's what I see when I click on a channel and then open the Library. When I do this, it appears that all the LPX channel strip categories do show up...
(This suggests to me that the channel strip content for LPX has downloaded successfully, but for some reason it's only appearing in the library, not the settings menu itself)
3. Out of interest, I also tried clicking OPTION+Settings, which I would usually expect to show all strip presets (rather than limiting to track type)... again, when I do this, each of the categories is only offering the "Legacy" content, not the LPX content:
I'm not quite sure what's going wrong.
I am pretty confident that this is not due to the fact that I completely removed L9 before installing LPX - because all the L9 Legacy content is showing up fine, it's the LPX settings that appear only in the Library, and not the channel strip settings menu itself.
If anyone has any thoughts on what's happenening, or a possible way to resolve this, I'd be very grateful!
Cheers,
Mike

Hi all,
I've just had a chance to check out a Friend's installation of LPX - it seems that what I have described above is the way LPX handles presets... rather than showing the categories and sub-categories when you click on the "Settings" button in a channel, this is all now managed within the library.
Hope this is of help to anyone else coming from an earlier version of Logic Pro!
Cheers,
Mike

Instrument Plugins No longer show up in the Channel Strip Area?

I’ve been working with Mainstage 3 quite extensively now.
OS X Version 10.8.5
It’s been incredible and I really love the program.
Just Today, I noticed the instrument plug-ins don’t show up in the
channel strip area. Only the Audio and Mide FX plugins.
I tried the View dropdown menu list options
Where it says “Hide Plugins” with a “V” shortcut only,
But it doesn’t change anything, either way.
I tried re-booting the computer. starting a new concert, new patch with channel strip, etc.
Luckily, everything I programmed still works, but I can no longer edit anything anymore.
So the instrument plugins are still working, but I don’t see them in the Channel Strip area.
Any help you can offer would be greatly appreciated!!

In edit mode, try pressing command>6(for future reference, command>5 toggles the screen control inspector).

EzDrummer not showing up in channel strip

Similar Messages

Maybe you are looking for