EZT Codes mass change for all products

Hello all,
Currently I only find a way to change the EZT codes (european customs tariff), like Y900, for every single product in GTS (customs products).
Is there a possibility to change the EZT Code Y900 for all products in the system?
BR

Hi Jörg,
Your example is interesting, and maybe leads to further discussion...
As far as I know, the 'Y900' code is not changing, so is your requirement to change the entries only theoretical, or do you want to delete the entries due to mistakes?
Could you consider proposing the 'Y900' (or other) document using the Data Proposal mechanism, perhaps based on the Tariff Code, rather than maintaining the document in all Products?
I can see that SAP have provided a Function Module /SAPSLL/PRDOC_FAE_SELECT that allows you to find all Products that have particular documents assigned. Perhaps that could help your developer if you decide to create a maintenance program?
Let us know if you need further assistance or sympathy with this :-)
Regards,
Dave

Similar Messages

Mass Cancel/ Mass change of a product across all orders

Dear Friends,
We have a typical requirement at our client:
1.How to cancel a product across multiple orders (Mass Cancel) ?
2.How to change a product acorss multiple orders (Mass change in all orders)
They had a issue with one of the product and to be cancelled due to legal requirements..but we have had the orders ready, which include other materials also.
We now want to change one Material across all orders..how to do this? Same is the case wtih Mass Cancellation requirement.
I request you to help us on this.
Thanks
Ravi
Edited by: Ravi Prasad on Nov 24, 2008 4:38 PM

Dear Ravi
1) To cancel in mass, you have to create a recording in LSMW and upload the text file
2) To change a material in multiple sale orders, go to VA05, input the material code and execute. There from top menu bar, click on "Edit -- Mass Change -- New Material"
thanks
G. Lakshmipathi

Mass change for QM at operation level in routing

Dear Experts,
I have to carry out mass change for Quality Management at operation level in routing. The steps that I am carrying out for an individual record are as follows.
1.     CA02
2.     Inspection point 100 is maintained at header level
3.     Go to operation level
4.     At operation level work center and control key have been maintained
5.     Double click on operation
6.     When I scroll down here I go to Quality Management: Inspection Points view.
7.     There by default in Insp.pointCompletion system shows the option as u201CQuantity, valuation (production) and radio button selected default indicates u201CQty-relatedu201D
8.     I want to change these options as only u201CValuationu201D and u201CNo relationu201D respectively
My queries are,
1.     Is there any T-code available to carry out these changes in mass?
2.     Is it possible to do this without any Z development?
I am doubtful about using LSMW here. I would be highly grateful to you if someone can help me step by step.
Thanking you,
Anand Rao

Hi Sujit,
Thanks for your reply!
I tried CWBQM. Unfortunately could not succeed. I think may not be feasible through CWBQM.
But I came across T-Code CEWB . There I opted "SAP_OPERATION" as working area and it worked. Its quite useful T-Code.
Thanks again for your input.
Regards,
Anand Rao

Mass Change for Service master

Dear Experts,
I've tried to do Mass change for service master.. in transaction MASS, i couldnot able to find the object for service master there..
Is there any possiblity to do mass change for Service Master
thanks

Hi,
I have tried ur scenario. Mass change for service master was possible using the TCode: MASS. But if u go to the Tcode:MASS, system asks object type. object type for service is not available in the match code/input help(F4).
At any time, if u want to know the object type for any transaction , goto the Tcode: SW02.(path: SAP Easy access: SAP Menu->tools-> ABAP work bench->overview->business object overview( SW02).
click on materials mgmt.-> external services mgmt.-> service master ( in the tree list).
Object type for service master: BUS1005
this business object is useful for list display for service master records(get list), read detail data for a service master record, create& change service, display object, check existance of object.
object type for attributes in service master: IFSAP
reference table: ASMD
goto SW02, to find object type for any transaction.
i think this information is very useful to u.
reward me according to ur uasge of this information.

Mass change for DMS

Hi All,
Is there any standard TCode for Mass changes for document managmen?
Regards
Varma

Hi,
If u can specify what attributes u wish to change using mass change , then probably i can suggest some standard SAP functionality or by using Easy DMS.
Regards
Abhishek
PS:reward points if u find anything useful.

Infotype screen headers needs to be changed for all the infotypes

Hi Guys,
This would be for a global implementation question.
For the US for a particular region, the screen header needs to be changed for all the infotypes.
The existing field (in the infotype header) is Employee Group which needs to be replaced with employment status.
The know how to change the headers but my question is STAT2 exists in IT 0000 but does not exist in 0001, 0002 0007.........etc
When i go to Table T588J to add an entry , Screen Header 42......,
I get an error " No Field STAT2 exists for infotype 0001"
No field STAT2 exists for infotype 0001.
Message no. PG811
Diagnosis
No STAT2 field exists for infotype 0001.
Procedure
Please contact your system administrator.
Procedure for System Administration
In Customizing, determine the incorrect entry in Personnel
Administration in the Header structure per infotype view, step " Determine infotype header and correct it
I would like to have some inputs from you guys ..... Any Suggessions...
Thanks,
Aastha

Hi Aastha,
Correct me if I am wrong.
First you need to maintain the header in T588J.
Screen header of an infotype is defined in view V_582A_B. We can define one screen header for employee and another for applicant in view V_T588I. The header modifier selected from view V_T588I has a definition in table T588J, which finally gets shown on the screen.
Depending on the transaction class (A = Personnel Administration, B = Recruitment) and the country grouping, a header modifier is assigned to the infotype header in the u201CHeader Modificationu201D view V_T588I.
For example like
Screen Header / Tr. Class / Header modifier
00 / A / 60
In the view u201CHeader Structure per Infotypeu201D (V_582A_B), a header has been assigned to every infotype. It also determines whether the data is valid from the system date or the start date of the infotype record
Hope this is useful.
Regards
RK

How create a replice "Mass Change for Quotation" from the "Mass..for order"

Hello everybody,
How create a replica "Mass Change for Quotation" UI object from the standard "Mass change for Sales Ordesr" UI object...
Way: SAP CRM==>Select a business role "SPL-Service part Management" ==> Sales ==> "Mass Change Sales Orders"
It needs a replica with the title "Mass Change for Quotation" .
Could you pleas help?
Mit freundlichen Gruessen / Kind regards,
Pavel Biarozkin

Hi Howard Brown,
Thanks for your suggestions about Windows user experience. Actually, we are glad to hear more feedback
about Windows operating system so that we can improve Windows to make it be more easier to
use.
As a suggestion for your current situation, you can use Windows Charm Bar to search Apps, it is also easy to use.
Alex Zhao
TechNet Community Support

Mass changing for accrual object assignments part of the field profit_ctr

Hi Experts,
Does any one know about mass changing for accrual object assignments part of the field profit_ctr (profit center).
How can we do this?
Best Regarts.

Hi,
I have equal problem. How did you save him?
Regards,Irena

NewBlueFX - CC versions - turning off GPU for all products needed

I've had NewBlueFX plugins for quite a while now - but the one issue that bugs me about using them is I have to turn off GPU for all products when applying them (virtually every job). I was advised by NewBlue to do this when I was having problems editing and playback being messd around visually why editing.
Just installed (correctly) their updated CUDA versions and still no difference in preformance and still have to turn off GPU...
Clicking on the plugin applied>info>click "disable GPU for all products" and it all runs smoothly.
Does anyone else have the same issue? Is it an issue or is this normal? Why?
Should it not be that effects plugins like this should actually work with all the bells and whistles turned on - not off?
Having spent out on a machine with 24 cores, a Quadro 2000 card and stacks of memory - the machine should be able to handle a NewBlueFX plugin with GPU and everything turned on...?
Am willing to learn on this...

Just below "Extras" in the View menu there is "Show...", where you can check/uncheck individual items - permanently.
Ctrl+H (extras) is just a bucket to collect them all and turn off with a single shortcut.

Report of List of all status changes for various production orders at a tim

Hi,
Can I have a standard report which shows the dates of each and every status (user & system) of a production order.
I need to have a report for a list of productio orders at a time.
If we go to CO03, header menu, status changes option is there, but it only caters for single production order.
Table JCDS is available to know the dates but I need a standard one rather than a Z development.
Or you can guide me any function module.
Thanks,
Kumar

Hello,
You will get the details of status in following table.
JEST - for object status
JSTO - Status Profile
TJ02T - to Decode the status Number
as the status data you will get from JEST is in very typical form you have to use TJ02T to find the exact status
AM

How to make a mass change for incoterms of a scheduling agreement at item level.

Hi SAP Guru,
There are many wrongly assigned incoterms in the scheduling agreement at item level by a user exit which was implemented recently in production. May i know if there is any way that we can revert those changes back to the original incoterms via mass change? I've tried to search over the internet and it seems like there is no posting about this issue before. Please help urgently. Thanks in advance.
Regards,
Shawn

You can use the following sample to develop your usecase.
Here, we would show menu items only for the nodes at level 3.
You can also download the entire sample based on POJO at
http://adfsampleapplications.googlecode.com/svn/trunk/TreeSampleApplication.zip
The code is self explanatory.
Let know, if you have any specific questions.
<af:form id="f1">
<af:treeTable value="#{bindings.continents.treeModel}" var="node"
selectionListener="#{bindings.continents.treeModel.makeCurrent}"
rowSelection="single" id="tt1" columnStretching="last">
<f:facet name="nodeStamp">
<af:column id="c1">
<af:outputText value="#{node}" id="ot2"/>
</af:column>
</f:facet>
<f:facet name="pathStamp">
<af:outputText value="#{node}" id="ot1"/>
</f:facet>
*<f:facet name="contextMenu">*
*<af:popup id="p1" contentDelivery="lazyUncached">*
*<af:setPropertyListener from="#{bindings.continents.treeModel.depth}"*
*to="#{pageFlowScope.CurrentDepth}"*
*type="popupFetch"/>*
*<af:menu text="menu 1" id="m2">*
*<af:commandMenuItem text="View Districts" id="cmi1"*
*visible="#{pageFlowScope.CurrentDepth == 2 ? true : false}"/>*
*<af:commandMenuItem text="View Attractions" id="cmi2"*
*visible="#{pageFlowScope.CurrentDepth == 2 ? true : false}"/>*
*</af:menu>*
*</af:popup>*
*</f:facet>*
</af:treeTable>
</af:form>
Thanks,
Navaneeth

Mass change for field Confirmation control Key in PO / SA

Dear All,
There is a need to do mass change in value for field Confirmation control Key in PO / SA. Some of them have PO history. If we have PO history system wont allow to change conf. ctrl key. Also since it is a production system we can not cancel previous po histories. This is in SAP 4.7 where we dont have mass change tcode for Scheduling agreements.
Can we maintain the values thru table entries. like using se16n maintain entries check box. This option is greyed out. can we activate that & do this requirement.
please suggest.

hi Greetings!
The confirmation control key can not be changed in the scheduling agreement if GR for item had already been posted. If the GRs can be canceled , it is possible to change the confirmation control in the SA item.
Version 4.7 do not support Mass change of scheduling agreements, hence you have to either create a SCAT or BDC to perform the task.
Gobinathan G

MASS change For SD Scheduling Agreement

Dear SAP GURU,
We want to change SD Scheduling Agreement mass change header and item level.please provide me t-code for the same.
Regards,
Arun Somase

There are many ways
1. Try MASS tcode with object BUS2032
2. You can try creating a CATT for the same if the changes are for only few thousands. Just explore on CATT on google, you will get lot of materials. Some of the links for the same are
http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/BCCATTUT.pdf
http://www.sap-img.com/sap-catt.htm
http://www.thespot4sap.com/articles/CATT.asp
http://sap-f3.blogspot.com/2009/12/create-or-change-scheduling-agreement.html
The last one is specific to scheduling agreement.
3. If there are more records, y ou can use LSMW. Again search for LSMW in google, there are lot of materials available.

Explicit History Code Plug-in for Adobe Products?

Hello, my name is Matthew Reeves, a graduate student at the University of Utah School of Architecture in Salt Lake City, UT. I hope you are doing well this summer.
I am currently completing my final semester of architecture school, and have been learning several softwares to assist in design. I encountered an idea that could greatly aid Adobe products.
21st Century architecture accomplishes most of its designs in Rhinoceros, and develops them in Revit, from Autodesk. Rhinoceros offers great freedom in form, all the while computing the information as exact geometries that can be easily exported to documentation software (i.e. Revit or AutoCAD).
Rhinoceros has developed a code plug-in known as Grasshopper, which controls the history of command functions in the software and permits modifying each sequential action made, at any point in time. The process is known as "explicit history."
The image below depicts a typical Rhino geometry with a Grasshopper code depicting every command made along the way, from left to right--such as "rotate," "crv," and "loft"-- with toggles that can modify each command:
Is there any way an explicit history plug-in can be developed for Adobe products?
Please let me know if I can clarify the suggestion. I am eager to see this happen, and would use it frequently.
I am currently a customer advisor, and can be contacted through my account.
Best,
Matthew

https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for feature requests

MM - Pricing Conditions - Mass Change for Planned delivery costs

Dear gurus,
Is there way to mass change the value of pricing conditions of Planned Delivery costs in the PO? Also the supplier?
Any suggestion?
Many Thanks for helping,
Maria

Hi,
As far as I know, this can be done for condition type/vendor price maintained in info. record.
Transaction code: MEKP
Enter the condition type, enter the '+' sign if value is to be raised.
If you tick the 'Test Run' you can also simulate the condition (old v/s New).
Hope this helps!!
Reetesh

EZT Codes mass change for all products

Similar Messages

Maybe you are looking for