F.01 drilldown reporting option

Dear Friends,
Can anyone advise me on how we create drilldown reporting for F.01.
Currently in our system when we execute transaction F.01, we are unable to drilldown any figures.
Our objective is to know further details of each GL account amount from Financial statement analysis itself.
Thank you,
Sunil.

Kaka,
In standard Financial statement report, you can only look at the balances of GLs. Drilldown option at the line item level is not available in F.01 report.
Regards
Shishir

Similar Messages

Drilldown reports in Accounts Payable

I am trying to add the discount amount (BSEG-WSKTO) to the output of the S_ALR_87012078 report. The requirement is to have the age wise discount amount as an additional column. I have copied the form 0SAPDUEAN-01 (FKI4 transaction)and create a new drilldown report with it. I have even tried to create a new form. However in any case when I try to add a new element to the form, it only provides a selected list of options(or characteristics). The usual report painter reports have a library associated with them. Is there any kind of library associated with the reports created with FKI1 transaction? Is there any way to add a new characteristic with the field I need? Please let me know how I can add this new column. Any help will be appreciated.
Regards,
Saika

It is not possible to include new field to the report by customizing, I suggest that you can develop a customize by ABAPer.
Flex Yang

Regenerate Data for FI drilldown report(B/S)

Hi. everyone
Data for table glt0(bkpf, bseg) is not same FI drilldown report's data.
So, The B/S that we make using FI drilldown report is not same F.01 B/S.
Table glt0's amount is right. but FI drilldown report's data is wrong.
I want to delete FI drilldown report's all data(not report) and recreate FI Drilldown report's all data.
Do you know program or t-code for my problem?
Pls, help me.

Hi,
just an idea: just add Custom key fig1 to Cube B. As is doesn't contain any data it shouldn't do any harm.
The other option is: raise a error message at http://www.service.sap.com.
regards
Siggi

Remove "Calculated Profit *ERGEBNNIS*" from Customized PCA Drilldown Report

I create PCA Drilldown Report by copy from standard form &standard report "0SAPBSPL-03" or T-Code "S_E38_98000088".
When I execute this standard report with Financial Statement Version, it's OK. There is no item of Calculated Profit (Account No. ERGEBNNIS)
When I execute my report that copied from the standard, and also input the same Financial Statement Version in the selection screen, the report always show ERGEBNNIS.
How could I set my PCA drilldown report to exclude ERGEBNNIS?
Ton

Hi
In Drilldown reports, there is usually a menu option in the report form definition to define the Drilldown Layout Display... This controls what to hide and what to display
You can try that once
br, Ajay M

EC-PCA001G -drilldown report

Hello,
I need to add a select option for company code to drill down report (EC-PCA001g)- related to Profit center accounting and then check for authorization using G_REPO_LOC. I have created a copy of this report and has added select option. But I am unable to find any method to apply authorization check. Can anybody please provide me, if there exists any customer exit, user exit which triggers for report S_ALR_87013326. Thanks.

Dear All
I need to change the GL accouts in Drilldown report FGI0. In FGI2 tried but i couldn't able to find the exact location to chage can you please help me. On how can change means regroup the GL account and need to add the new GL account in Drilldown report..
Regards
Chandrasekhar G

FI-AR drilldown report

Hello,
I use the drilldown report to display the due date analysis for open
Item for the customer. But I see that only the amount in Local currency (field name
DMSHB) is available.
In our system, in FI, we have activated the parallel currency (group currency, currency type 30).
So, I need to the execute the report with the group currency, or need to have in the
selection screen the field "currency type".
How can I add a new key figure?
I create the form in FDI4 transaction, form type Line item analysis.
Thanks for your help,
Jocelyne

add another column with the group currency filtered on in the report. Did get any difficulty here?
Sarma

The report options under "configure" and CSV or xls.

The report options under “configure” does not give .csv or xls as options. Instead of using vi to pass data to database, is there a simple way to transfer all the results (just like the way in the report that automatically generated) to .csv or xls...
Thanks.

Hi,
in order to modify the report generation, you have to understand the way how TestStand works in regard of the report generation.
There is a tutorial which explains this which you can find here. But please note that the tutorial is currently undergoing an improvement process.
The reason that the report options don't give you the option for xls or csv as report is:
Neither xls nor csv are predefined. So for example measurement values in xls can be placed in a special worksheet or included in a main sheet in a certain column.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Drilldown report in Crystal

Hi,
I need to produce such drilldown reports with Crystal against an Oracle database
First Look of the report
Sales report for the country
North   $250
South $100
East    $300
West   $150
Total    $800
I need to Drill on details for one of the items
Sales report for the country
North   $250
AA     $100
AB     $100
AC     $ 50
South $100
East    $300
West   $150
Total    $800
Is it doable with Crystal, if so I would like to know how it can be possible without using a stored procedure in Oracle.
Thanks in advance,
Venkat
Edited by: Venkat Ramamurthy on Apr 23, 2009 12:47 AM

First you need to create a group on country in the report and place the details in detail section. Now suppress your detail section based on the condition like this
drilldowngrouplevel=0
Now refresh the report and you can see all the countries and the total amount. When you double click on the group name country you can see the details.
Regards,
Raghavendra

Drilldown report FGI0 Account Number and compounding Chart of Accounts

Dear all,
I created a drilldown report in FGI0 for FAGLFLEXS (Reporting for Table FAGLFLEXT). I am showing the field Account Number. However the field display is [Chart of accounts][Account number] in the corresponding column, but I want to display only the Account number.
If I remove the compounding field RKTPL from table TKAFD, then the program cannot find the Account Number Text.
Is there a way to show only the Account Number, without the Chart of Accounts in its 4 first fields, and also show the account text?
Thank you in advance!

Dear All
I need to change the GL accouts in Drilldown report FGI0. In FGI2 tried but i couldn't able to find the exact location to chage can you please help me. On how can change means regroup the GL account and need to add the new GL account in Drilldown report..
Regards
Chandrasekhar G

Drilldown reports

Hi
I have defined a drilldown report using transaction IMD1(report painter).
The user wants an ALV list instead of the graphic control.When I get the ALV list and when I double click on a coloumn it should take me to a transaction.
I couldnt find any setting where I can say this.The code is a generated code and so I cannot modify the code also..Can you please suggest any workaround for this.
Thanks and Regards,
Siva

Hi Jaysree,
I hope u have done the ALV creation part and the output is coming.
Under :
CLASS lcl_event_receiver DEFINITION.
Hot Spot Click
       handle_hotspot
         FOR EVENT hotspot_click OF cl_gui_alv_grid
            IMPORTING e_row_id
                      e_column_id
                      es_row_no.
ENDCLASS.
Under:
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
METHOD HANDLE_HOTSPOT.
CASE E_COLUMN_ID.
       WHEN 'ur_col_id_name'.
    DATA: lw_ITAB LIKE LINE OF I_ITAB.
    READ TABLE i_ITAB INTO lw_ITAB INDEX E_ROW_ID.
    IF SY-SUBRC EQ 0.
       SET PARAMETER ID 'QLS' FIELD lw_ITAB-PRUEFLOS .
       CALL TRANSACTION 'QA13' AND SKIP FIRST SCREEN .
    ENDIF.
   WHEN 'EXIDV'.
   DATA: lw_ITAB LIKE LINE OF I_ITAB.
   data lv like lw_itab-exidv.
   read table i_ITAB into lw_ITAB index E_ROW_ID.
   if sy-subrc eq 0.
   CALL TRANSACTION 'HUMO'AND SKIP FIRST SCREEN.
endif.
ENDCASE.
ENDMETHOD.
U need to:
Set the event handlers that are defined in the class here
    set handler event_receiver->handle_toolbar      for alv_grid.
    set handler event_receiver->handle_user_command for alv_grid.
    set handler event_receiver->HANDLE_HOTSPOT for alv_grid.
I hope this gives u some idea how to proceed.
If not, please get back.
Regards,
Anjali

Edit Report option freezes and Formatting Vanishes in EPM 10.0

Hi,
While creating a report in EPM 10.0 which i have selected as 'Use as Input form', i created Active X buttons and did dynamic formatting as well. All seems to be fine but as i Close and Reopen, or i Refresh the template, formatting vanishes and Edit Report option also gets disabled.
I am working on EPM 10.0 SP07 Patch 02. Please guide me on this.
Thank you.
Rgds,
Poonam

Hi Poonam,
This is probably happening because the report/input schedules is not getting connected. Please check the connections once.
Also if you had named the report in "Edit Report" earlier, say for example "Sales Report", once the report is open you should be able to see this name on the EPM context pane, right side under Current Report: Connected to "Your Model" and below that in the drop down the default selection should be "Sales Report". This means that the report is connected and the Edit Report option is active.
Hope this helps.
Regards,
Bhairavi

"Edit Report" option getting disabled on saving the report in BPC 10.0

I have created input schedules using "Edit Report" functionality in BPC 10.0 NW, added a few buttons and corresponding VB code and tested the input schedule by sending data and running data manager package. Everything is working fine. After that I saved the input schedule and closed the Excel. On reopening the excel Add-in and the input schdule, the "Edit report" option becomes disabled and refresh and other functionalities available for the report get disabled. I have faced this issue a couple of times. Has anybody else faced this issue? Can someone let me know the resolution to this problem?

Hi Shruti,
This is probably happening because the report/input schedules is not getting connected. Please check the connections once.
Also if you had named the report in "Edit Report" earlier, say for example "Sales Report", once the report is open you should be able to see this name on the EPM context pane, right side under Current Report: Connected to "Your Model" and below that in the drop down the default selection should be "Sales Report". This means that the report is connected and the Edit Report option is active.
Hope this helps.
Regards,
Bhairavi

Report Painter vs FM Drilldown Reports

Hello Experts:
We are upgrading from Former Budgeting to BCS and are attempting to use the report painter tool for our reports. I have not used the report painter tool much although it is similar to the FM Drilldown Reporting functionality. My question is:
With FM Drilldown Reporting, characteristic FM acct asst was available as a row choice and included fund, funds center, and commitment item. It appears with report painter that each of these is a separate characteristic which creates three lines on the report instead of one.
Example:
FM Drilldown Reports
Fund/Funds Center/Comm Item    $$$
Report Painter
Commitment Item $$$
Funds Center       $$$$
Fund                     $$$$$
I know that we could use Fund and/or Funds Center as variations but we want them to appear on a line in the report so that when the report is downloaded, the information appears as in my Drilldown report example.   Is there a way to create a characteristic that includes all three FM assignments? Or some other method to accomplish this?

Hi Everyone:
I am still fighting with Report Painter. I am now trying to figure out how to pull Period in as a column characteristic even though I have it as a characteristic in the General Data Selection. I'm using Library 4FM for budget reporting. My end users want to be able to execute the report by period but for certain columns of the report be able to see all periods displayed. Example:
Adjusted Budget - All Periods
Commitments - Period from selection screen
Expenses - Period from selection screen
I do not understand the use of the GRCT transaction. Are there any links that might provide detailed instructions for it's use?
I would appreciate any assistance/guidance you can provide.

Difference between Drilldown report and Interactive report

There is no difference between drill down and interactive report, they are the same.
With drilldown reporting, SAP provides you with an interactive information system to let you evaluate the data collected in your application. This information system is capable of analyzing all the data according to any of the characteristics that describe the data. You can also use any key figures you wish to categorize your data. You can display a number of objects for a given key figure, or a number of key figures for a given object. In addition, the system lets you carry out any number of variance analyses (such as plan/actual comparisons, fiscal year comparisons, comparisons of different objects, and so on).
You can produce both simple, data-directed lists (basic reports) and complex, formatted lists in drilldown reporting (form reports).
Drilldown report provides you with comfortable functions for navigating through your data. For example, you can jump to the next level of detail or the next report object on the same level, hide individual levels and switch between the detail and drilldown lists. It also provides a number of additional functions which let you process lists interactively (sorting, conditions, ranking lists, and so on). SAP Graphics, SAPmail and the Excel List Viewer are also integrated into drilldown reporting.
The drilldown functions are divided into three groups which differ in the number of functions available. That way each user can choose the functional level most suited for his requirements.
In addition to the online functions for displaying reports, drilldown reporting also provides functions which let you print reports. A number of formatting functions are available to let you determine the look of your printed reports (page breaks, headers and footers, underscores, and so on).
The menus and the functions available directly on the drilldown report make it easy to use the information system.
What is an Interactive Report?
An interactive report generally works in the following fashion:
1. Basic list is displayed.
2. User double clicks on any valid line
    or
    User selects a line and presses as button on the tool bar.
3. The corresponding event is triggered
4. Then in the code, the line on which action was done, is read.
5. Depending on the values in that selected line, a secondary list is displayed.
6. Steps from 2-5 are repeated till the end.
From the above explanation, I believe, its clear that, the 20th list, will essentially depend on the "selected line" of 19th list. According to your question, you want to move to 20th list directly, without "a prior list". May I know the exact requirement so that, an appropriate solution can be suggested?
Again, your question was, how to move to 20th list directly on pressing of execute button. Its not possible to move to 20th list. You must cross over a basic list, before you can go to a different list level, using the code given by Pavan.
What are Drilldown reports?
The lines of basic list of a drilldown report when clicked, will take the user to the corresponding (standard) object's display.
For eg: Suppose your report's primary component is purchase requisition, (assume you are printing PR details), and the basic list displays details of many PRs.
Eg: when clicked on a particular line of the PR basic list, it takes you to std t-code me53 (display of purchase requisition). This is the 'Drill-down' functionality.
For this, in the at-line selection of your program, as per the above ex: you'll set the parameter ID of PR number BAN (that you can get from Data element) in memory (using set parameter id) and then calling the corresponding transaction (usually skipping initial screen of the std t-code).
Likewise, if it's Material Number (Matnr), you'll be displaying MM03 transaction w.r.t. the line's matnr.
AKSHAT..........

Good, information. But I think you should post these items in Wiki, in place of forum, as here we have Qns & Ans; problems and solutions.
https://www.sdn.sap.com/irj/sdn/wiki
[ABAP Development > ABAP General ]
Wiki is the right place for such knowledge base
Thanks!!
Regards,
Vishal.

Edit Report option freezes and Formatting vanishes in EPM Excel 10.0

Hi,
While creating a report in EPM 10.0 which i have selected as 'Use as Input form', i created Active X buttons and did dynamic formatting as well. All seems to be fine but as i Close and Reopen, or i Refresh the template, formatting vanishes and Edit Report option also gets disabled.
I am working on EPM 10.0 SP07 Patch 02. Please guide me on this.
Thank you.
Rgds,
Poonam

Hi Poonam,
This is probably happening because the report/input schedules is not getting connected. Please check the connections once.
Also if you had named the report in "Edit Report" earlier, say for example "Sales Report", once the report is open you should be able to see this name on the EPM context pane, right side under Current Report: Connected to "Your Model" and below that in the drop down the default selection should be "Sales Report". This means that the report is connected and the Edit Report option is active.
Hope this helps.
Regards,
Bhairavi

F.01 drilldown reporting option

Similar Messages

Maybe you are looking for