F-03 Clearing of GL Accounts open items

Hi SAP Gurus,
We are doing f-03 <Clearing of GL accounts open items>  There are about 50,000 plus open items that needs to be cleared.  In order to clear each item,  i guess you need to double click each...but it consist of 50,000 plus.
I there any other way instead of double clicking the items specially if it consist of thousand of items?
Please help.
Moderator: use T-code F.13 and avoid asking basic questions

Hi,
My user is clearing the bank gl account after uloading the statements thru MT940.
But when we clear the account by putting the clearing date 30.09.2007 the system should clear the document by defining the date 30.09.2007 But system is showing the clearing date as 01.10.2007 in that particular gl acct.
What can be the issue for this?
regards
M

Similar Messages

  • Cannot Clear G/L Account Open Items (F-03)

    Hi Expert,
    During perform Clear G/L Account Open Items (F-03), there is error message "There are no open items managed in account 2309001".  Checked the G/L at FS00 - Control data tab (Open item management) is not ticked.  Only line item display was ticked.
    This G/L under Account group = General A/L Accounts, Field status group = ZB50 (Balance Sheet-others).
    When we run the FBL3N to check the open item for this G/L, found that the G/L still have 2 lines item is open, the rest of items had been cleared.  How can we perform clearing for the entire open line item in this G/L ?
    thanks.
    rgds,
    tee

    Hi Expert,
    The problem now is why only 2 items cannot be clear,
    but the rest of items can be clear, some more all of these items is refer to same document type (SA & KR).
    I'm trying to ticked the check box as Open item management, but system prompt out msg "Open item management is not defined for reconciliation accounts"  What does it means ?
    thanks.
    rgsd,
    tee

  • Reg:Tcode for G/L Account open item clearing

    hi all
    what is the t code gl account open item clearing.
    regards
    jk rao

    Dear:
    F.13 for automatic open item clearing.
    F-04 for posting with clearing manually.
    F-03 for GL account clearing manually which be in open item managment

  • GL Account open items- BSIS table

    Hello All,
    The standard BSIS table contains the GL Account open items. However i can find the line items for GL Accounts which are not based on "Open item management" also in this table. eg.Salary account postings from yr 2002 (All year end postings have been done appropriately). Is there any other table which can give the relevant info. ?
    Any pointers to this will be highly appreciated.
    Regards,
    Aastha

    Not sure if I have understood the question, but I will give it a try.
    There are two different concepts - "Open Item Management" and "Line Item Display".
    Line Item Display allows you to see from FS10N, further drill-down into FBL3N
    Open Item Management allows you to see Open and Cleared Items.
    Open Items are stored in tables BSIS, BSIK, BSID
    Cleared Items are stored in tables BSAS, BSAK, BSAD
    Over and above this, ALL documents are stored in BSEG and BKPF, irrespective of their Open Item or Line Item status.
    Hope this helps.

  • Clear Huge Volume of Open Items

    Hi Experts.
    I need your help to identify a way to Clear Huge Amounts of Open Items. After my initial analysis i have ~50 Million Open Items in only one Company Code and only in One Account.
    The tools available are shortdumping due to huge amounts of data (average per month is ~700 000 OI.
    Is there any alternate way to clear those Open items via custom ABAPs or advance SAP tools?
    Thanks

    Hi All thanks for the tip on F.13. I also moved an OB74 rule to clear the data.
    but once the Items are being selected i am receiving the followin error. I know documents only expect 999 lines. Is there any custom or something to check this?
    SAPMF05A 0131 S F5 074 798,131 items were selected
    SAPMF05A 0700 E F5 734 Item 1000 should be created; a maximum of
    999 items are allowed.
    The example was for only one month.

  • Function module for GL account open items at a key date

    Is there a function module for "GL account open items at a key date" similar to following for customer and vendor accounts?
    BAPI_AR_ACC_GETOPENITEMS Customer account open items at a key date
    BAPI_AP_ACC_GETOPENITEMS Vendor account open items at a key date
    If not, please suggest any alternatives. I am looking to capture the output of FBL3N (GL account line item display) in a program.
    Thank you in advance.
    Prasanna Pujari

    hi,
    please go through the below link i think it will help u.
    http://sapfunctional.com/FI/GL/Balance.
    Regard
    Abhishek Tripathi

  • Do F-32 Clear Customer and Process Open Items just do BKPF/BSEG adds/chgs ?

    !uestion 1:
    When a user executes F-32 in  "clear customer" and "process open items" modalities, are BKPF and BSEG the only tables that actually get changed via adds or updates?
    Or are there other tables affected as well?
    Question 2:
    If BKPF and BSEG are the only affected tables, can I safely emulate the effect of the F-32 Clear Customer and Process Open Items Modalities by:
    1) examining the BKPF/BSEG records added or changed;
    2) using the appropriate BAPI(s) to accomplish these adds/changes (like BAPI_ACC_DOCUMENT_POST)
    Question 3:
    If BKPF and BSEG are NOT the only tables affected by F-32 Clear Customer and Process Open Items, can I emulate these modalities of F-32 thru an appropriate combinaton of BAPIs ?
    Note:
    The reason Im asking these questions the way I am is because a search  of SDN turns up no really good answer to the question of whether the Clear Customer and Process Open Items modlaities of F-32 can be emulated by one BAPI or a combination of BAPI's.
    So by formulating questions (1-3) the way I have, I'm hoping that someone will provide SDN with a clear and definitive answer to the "F-32 BAPI Emulation" question.
    Thanks for any expert advice anyone can provide.
    Best
    djh

    Actually, the "right" answer in this case is to call CLEAR_DOCUMENTS and model the call after the call in PRELIMINARY_POSTING_ZANF_CLEAR

  • Bank Clearing Account - Open Item Clearing

    Dear Friends,
    We have maintained the configuration for importing the electronic bank statement and we have tested and found that the entries are getting posted in the Bank Clearing Account. However, we have encountered a major issue, when we perform the automatic payment run, the value date gets updated in the Assignment Feild, whereas the users want this to be updated with the combination of "Document No. + Value Date".
    Secondly, when we import the bank statement, in the multicash format, the posted entries in the Bank Clearing Account have the "Document Header Text" field updated in the Assignment Field coloumn, thus making it difficult to do automatic clearing of open items. In these entries also it is desired that the combination of Document No. relating to the item paid thru payment run plus the Value Date should get update so that the open items in debit and credit can be matched and cleared off automatically.
    Your help would be highly appreciated in achiveing these objectives.
    Regards

    Thanks Murali. Another help needed is how can we change the values in Assignment Feild, which is now getting picked up from the Document Header Text? We need the original Docuemnt No. + Value Date to get populated in the Assignemnt Field in the entries posted while importing the electronic bank statement.
    Would appreciate your help.
    Regards

  • Clearing problem for vendor open item

    while clearing open item of vendor through T-code F-44 i am facing the problem following problem
    Document splitting :-Item for clearing 1000/100020603/2006/005 not found,
    Daignosis as given in error:-document splittting cannot be performed clearing because it was not possible to find complete splitting information items to be cleared(company code 1000, doc. no.100020603, item 005). procedure as provided by the error massage is that the item  was not posted  with active document splitting. In this case this item or document would have to be migrated

    Dear Sweta,
    I think there is no such a table, as you expect, existing in SAP. As I know here are the
    most popular table about Accounting documents.
        Accounting documents
        BKPF                Accounting documents
        BSEG               item level
        BSID                 Accounting: Secondary index for customers         
        BSIK                 Accounting: Secondary index for vendors           
        BSIM                 Secondary Index, Documents for Material           
        BSIP                 Index for vendor validation of double documents   
        BSIS                 Accounting: Secondary index for G/L accounts
        BSAD               Accounting: Index for customers (cleared items) 
        BSAK                Accounting: Index for vendors (cleared items)   
        BSAS                Accounting: Index for G/L accounts (cleared items)
    If you need information about open line items of a certain day, you have to use ABAP.
    Regards.
    Maxielight.

  • Clearing GR/IR Account Matched Items

    Hi all,
    I'm trying to clear some GR/IR Accounts in F.13, and I'm getting some errors. 
    Error Log:
    Consolidated companies 2000 and ' ' are different. 
    I believe that there is more than one trading partner hitting the same gl account.
    Any suggestions???
    Thanks all,
    Steven

    Please first review the SAP Note 10757 FAQ: MR11, clear GR/IR clearing
    account, especially the second point.
    Transaction MR11 is only concerned with clearing the GR/IR account for
    quantity differences. If there is no quantity differences at the
    item level, MR11 will not report anything.
    In MM you could make a subsequent credit/debit to clearing the GR/IR
    account for value differences.
    By otherwise, You also have the option of clearing the open item
    following the next steps.
    You should first run the transaction MR11 to clearing the GR/IR account
    quantity differences and then run the transaction F-03 or F.13 to the
    balance due to valuation (FI) differences.

  • Bapi or FM for clearing Customer and Vendor Open Items

    Hi.
    I am looking for a bapi to post incoming payments from customers (F-28) and outgoing payments to vendors (F-53). I already tried BAPI_ACC_INVOICE_RECEIPT_POST, but with no success (just created a new open document), so if somebody knows how to use this BAPI to perform the clearing please post an example.
    Thanks.
    Edited by: Divya Saxena on May 22, 2009 4:06 PM

    Hi
    Just as Rich said
    It can use the BAPI BAPI_ACC_DOCUMENT_POST but only to post the document for incoming and outcoming payment, because they are account documents.
    But there isn't a BAPI to clear the open items: u should create it.
    Max

  • Gl account open item management.

    Hi
    This is Amar i am some daught about open itme management.
    in one gl A/c open itme management is taken while careting the GL, and posted some documents in that GL account is it possiable to remove the open item indecater in that GL  at any time?
    Exp: in one GL A/c open item management  is taken while creating the GL A/c and posted some documents in that account and cleared that open items now that GL A/c balance is '0' now it is possiable to remove the open itme indecater in that account?
    Regards,
    Amarnadh.

    Hi
    Yes you can switch.
    Goto SE38 and run program RFSEPA02
    Cheers
    Srinivas

  • Service tax interim account open item

    Hi ,
    I am transferring service tax from interim account to main account by using the standard functionality. The transfer is correct in terms of amount. But it is not clearing the open item. I need to clear the open items against which the transfer of amount from interim account to main account is happening.
    Regards

    Hi lolu,
    Thanks for reply.
    I am maintaining this account as open item only. And thats why my question is it is not clearing open item management. Without managing it on open item how will it clear the open item?
    members help me to resolve this issue.
    Thanks

  • Clearing of GRIR old open items

    Hello Experts,
    We have open items lying since a long time for A GRIR account. Now the IR document is already cleared but the GR docs are still lying open. There is no price/qty variance to carry out the clearing through MR11. Now question is, how to clear them through F.13, I can't see any document being created through this I have given the below selection in F.13.
    Company code - xxxx
    Fiscal Year - 2014
    Assignment - Nothing
    Document number - GR doc. no
    Posting date - Current date
    apart from above selection, GL account being selected.
    appreciate a quick response.
    Regards
    Partha

    Hi Nitin,
    Thanks for you reply!
    Our OB74 is - EBELN and EBELP.
    I infact knocked off some difference thorough MR11, but the FI entry has posted to a different GL other than the concerned GL and this is the reason, the details of this particular entry is not picked in F.13 and the balance is not becoming zero.
    Note: I am selecting only the concerned GL in F.13.
    Also please. let me know, how to clear off the single items, which don't have a correspondence debit/credit item.
    Regards
    Partha

  • Reset Cleared Documents and Vendor Open Items Report FBL1N

    Hi all,
    I have following scenario:
    - In last month, we had 2 documents (invoice and payment) cleared against each other. We created open items report as well as open items correspondence sent to Vendor. Obviously, the docs were not included in report.
    - In this month, we have reset and reverse clearing document of the documents. We create report again with the open key date as in last month. It should not include the 2 docs but it did with whichever key date we chose.
    Is there any setting that open item report doesn't include cleared item at the key date when we run report for previous month?
    Thanks and Regards,
    Dau

    Hi Dau,
    If i understand you correctly then you posted and paid invoice in Jan 2012 and generated the open line item report for Jan which correctly did not include this cleared invoice.
    Now in Feb 2012 you reset and reversed this payment document.
    The issue is when you execute the report FBL1N again then you get the open line item for this invoice correct. Please confirm what is the open item key date that you are using here for generating this report
    If you keep it 31.01.2012 then definetly this invoice should not appear in the report but if you keep that 29.12.2012 then this line item would for sure appear.
    The importance of key date is to limit the report to certain date. The system selects all items posted up to and including the specified key date and open for this period.
    so I think your issue is with the key date.
    Hope this helps you.
    Regards,
    Prasad

Maybe you are looking for

  • Error indicate 007 when run F110proposal

    Hi,    Yesterday I runned F110 for down payment request against PO of vendor 10000 with error message "No valid payment method " before vendor 10000 master data was maintained. And today I runned another F110 proposal  which also include this vendor

  • Problem in assinging key strokes to JButtons

    hi, i extended JDialog class and created a modal dialog which consits of some JLables and JTextFields with two jbuttons. 1) Ok and 2) Cancel. I would like to activate the Ok button when i just type enter key no matter where the cursor is focussed. ho

  • Type font too large on website

    On one website, I somehow managed to enlarge the type font or zoom in so that the sides are cropped. In the past, I've minimized the page images and type fonts and only resolved it by blowing out Firefox and reinstalling it. This is on my laptop (Win

  • Time Machine Deletion Notifications - or lack of?

    Hi, I'm wondering if there is a way to get Time Machine to notify you before it deletes old backups to make room on the drive, because at the moment I get the notification saying they've been deleted and I can either use another drive or exclude more

  • Is the iOS 6.1.3 update worth it for iPad 2?

    I have iOS 4.3.2, so it would be a big jump. I don't like the fact that I'll lose the YouTube app (I use it, I've never really used Google Maps app, though), but it's nice to be able to update my apps and download apps that require a higher OS. Howev