F-03....FI_TAX_GET_MWSKZ_EXISTENCE error code 12 function builder TAX2

Transaction: F-03
Error: System erro in routine FI_TAX_GET_MWSKZ_EXISTENCE error code 12 function builder TAX2
please let me know .how to fix this error
Regards
Sujan

Hi Vinay
I applied SAP note for that problem. I now am in new project donu2019t remember exact note number .....but pls check the below note
1162241
Regards
Sujan

Similar Messages

System error in routine FI_TAX_GET_TXJCD_LEVELS error code 2 function build

I am getting error "System error in routine FI_TAX_GET_TXJCD_LEVELS error code 2 function build" when I am doing release to accounting throught VF02 this error I am getting.Out client is USA client.TAX is picking up from the Veterx interface.Can anybody help regarding this.I checked the Tax prodeuure and also the tax classification everything is assigned properly.

Good Evening,
The reason why you are getting an error when passing the document to
accounting is because your ship-to partner does not have a jurisdiction
code. The error is correctly triggered since the jurisdiction code is
required when shipping to a jurisdictional country. You can't
post this transaction without a jurisdiction code.
If you maintain a tax jurisdiction code on the customer master,
cancel the invoice and rebill, the document should pass to accounting.
The tax jurisdiction code is maintained on the address data screen.
Please check if there is a jurisdiction code maintained in
the customer master data. If that is not the case, check, if the
tax pricing procedure for the country of the customer is set relevant
for jurisdiction code. If the country of the customer is relevant
(entry for pricing procedure) and the customer master has no jur. code
maintained, the error tells exactly that situation. Then, either the co
should be set to not relevant for TXJCD or the customer should get
that customising entry.
Please be aware that if shipping from the US to a non juristiction
country the system should take a dummy jurisdiction code from the OBCL
transaction.
If you have access to OSS notes then please see:
400766 Changes in accounting interface for Rel
112609 How are tax codes transferred to condit
I hope this helps!
Kind Regards,
Martina McElwain
SD Forum Moderator

System error in routine FI_TAX_CHK_PRICING_DATA error code 13 function buil

Hi I am posting an entry to a gl account and i got an error like
System error in routine FI_TAX_CHK_PRICING_DATA error code 13 function builder TAX2
Message no. FF769
I went to assign tax jurisdiction code in OBBG and assigned "TAXIN" to country india but still got the same error...can any one plese help me out in this

Hi,
Please check in OBY6, that your company code is having a country.
If not, then you need to check program LTAX2F01 (FORM DETERMINE_KALSM_FROM_BUKRS) in debug mode with your ABAPer help.
Regards,
Gaurav

LDAP: error code 53 - Function Not Implemented

Hi All,
While doing search on Oracle internet directory server(oracle ldap server),
we are getting following exception.
Exception
in thread "main" javax.naming.OperationNotSupportedException: [LDAP:
error code 53 - Function Not Implemented]; remaining name
'ou=people,dc=test,dc=com'
     at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3058)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2931)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2737)
     at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1808)
     at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1731)
     at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirContext.java:368)
     at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:338)
     at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:321)
     at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248)
     at DifferentSearches.doFilterSearch(DifferentSearches.java:99)
     at DifferentSearches.main(DifferentSearches.java:23)
Following is the code -
code:
     DirContext ctx= getDirContext();
     SearchControls ctls = new SearchControls();
     ctls. setReturningObjFlag (true);
     ctls.setSearchScope(SearchControls.SUBTREE_SCOPE);
     String filter = "(displayname=chandra)";
     NamingEnumeration answer = ctx.search("ou=people,dc=test,dc=com", filter, ctls);
     formatResults(answer);
     ctx.close();
When we search on the added attributes (like currentsession count) it works
fine. For this we had to enable index in OID on this field. But this is
not possible for the default attributes. OID does not provide a way to
enable indexing on these attributes. Could someone please let us know
how we can search on default attributes ?
Regards
Rahul
Edited by: Rahul_Sonawale on Oct 17, 2008 4:26 AM

Thanks Rajiv for reply.
I had read that thread before posting this. However, this is lightly different.
From other sites I can see that if it's caused by indexing, the error msg would say so and also tell you which attribute it is.
Some one suggested it's OID dropping the database connections intermittantly and should check both CRS ORACLE_HOME and RDBMS ORACLE_HOME have SQLNET.EXPIRE_TIME set and check the TNS and alert logs on the DB side for any other possible connection failure.
From some OID log we do see it has lost database connection:
OID logs in /u01/oid/oid_inst/diagnostics/logs/OID/oid1 :
ConnID:76 mesgID:2 OpID:1 OpName:search ConnIP:10.244.87.239 ConnDN:cn=policyrwuser,cn=users,dc=us,dc=oracle,dc=com
[gsldecfsFetchEntries] ORA error 3135: ORA-03135: connection lost contact
Process ID: 29973
Session ID: 164 Serial number: 3
I should post another thread for oid lost db connection.

Preverification failed with error code 1. BUILD FAILED

Hallo Oracle,
Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
Error preverifying class com.sun.activation.registries.MailcapFile
    VERIFIER ERROR com/sun/activation/registries/MailcapFile
.<init>(Ljava/lang/String;)V:
Cannot find class java/util/Map
C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
BUILD FAILED (total time: 25 seconds)
this is the contents of build-impx.xml
<?xml version="1.0" encoding="UTF-8"?>

<project name="watsdownapp-impl" default="jar" basedir="..">
    
    <target name="pre-load-properties">
        <property file="nbproject/private/private.properties"/>
        <property name="user.properties.file" location="${netbeans.user}/build.properties"/>
        <available property="user.properties.file.exists" file="${user.properties.file}"/>
    </target>
    <target name="exists.config.active" unless="config.active">
        <echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
        <property value="" name="config.active"/>
    </target>
    <target name="exists.netbeans.user" unless="netbeans.user">
        <echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
    </target>
    <target name="exists.user.properties.file" unless="user.properties.file.exists">
        <echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
    </target>
    <target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
        <loadproperties srcfile="nbproject/project.properties">
            <filterchain>
                <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                <concatfilter prepend="nbproject/project.properties"/>
                <containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
            </filterchain>
        </loadproperties>
        <property name="deployment.instance" value="default"/>
        <loadproperties srcfile="${user.properties.file}">
            <filterchain>
                <replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
                <replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
                <replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
            </filterchain>
        </loadproperties>
        <loadproperties srcfile="nbproject/project.properties">
            <filterchain>
                <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                <concatfilter prepend="nbproject/project.properties"/>
            </filterchain>
        </loadproperties>
    </target>
    
    <target name="exists.platform.active" unless="platform.active">
        <echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
    </target>
    <target name="exists.platform.configuration" unless="platform.configuration">
        <echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
        <property name="platform.configuration" value="CLDC-1.0"/>
    </target>
    <target name="exists.platform.profile" unless="platform.profile">
        <echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
        <property name="platform.profile" value="MIDP-1.0"/>
    </target>
    <target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
        <fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
        <fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
        <fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
        <fail unless="src.dir">Must set src.dir</fail>
        <fail unless="build.dir">Must set build.dir</fail>
        <fail unless="dist.dir">Must set dist.dir</fail>
        <fail unless="dist.jar">Must set dist.jar</fail>
        <property name="javac.source" value="1.3"/>
        <property name="javac.target" value="1.1"/>
        <property name="javac.encoding" value="${file.encoding}"/>
        <property name="deployment.number" value="0.0.1"/>
        <property name="deployment.counter" value="000002"/>
        <condition property="no.deps">
            <istrue value="${no.dependencies}"/>
        </condition>
        <condition property="no.preprocess">
            <isfalse value="${use.preprocessor}"/>
        </condition>
        <condition property="no.javadoc.preview">
            <isfalse value="${javadoc.preview}"/>
        </condition>
        <condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
            <istrue value="${filter.exclude.tests}"/>
        </condition>
        <property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
        <condition property="deployment.do.override.jarurl" value="">
            <istrue value="${deployment.override.jarurl}"/>
        </condition>
        <condition property="config.active.name" value="DefaultConfiguration">
            <length string="${config.active}" trim="true" length="0"/>
        </condition>
        <property name="config.active.name" value="${config.active}"/>
        <taskdef resource="org/netbeans/mobility/antext/defs.properties">
            <classpath>
                <pathelement path="${libs.j2me_ant_ext.classpath}"/>
            </classpath>
        </taskdef>
        <condition property="skip.deployment">
            <equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
        </condition>
        <condition property="app-version.autoincrement.trigger">
            <istrue value="${app-version.autoincrement}"/>
        </condition>
        <condition property="debug.timeout" value="30000">
            <or>
                <equals arg1="${debugger.timeout}" arg2="" trim="true"/>
                <not>
                    <isset property="debugger.timeout"/>
                </not>
            </or>
        </condition>
        <property name="debug.timeout" value="${debugger.timeout}"/>
        <nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
    </target>
    
    <target name="cldc-pre-init">
        <condition property="cldc-platform.trigger">
            <equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
        </condition>
    </target>
    <target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
        <property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
        <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
        <property name="platform.device" value=""/>
        <property name="dist.jad.url" value="file://"/>
        <property name="run.cmd.options" value=""/>
        <condition property="evaluated.run.security.domain" value="">
            <isfalse value="${run.use.security.domain}"/>
        </condition>
        <property name="evaluated.run.security.domain" value="${run.security.domain}"/>
        <condition property="override.jarurl.trigger">
            <and>
                <istrue value="${cldc-platform.trigger}"/>
                <istrue value="${deployment.override.jarurl}"/>
            </and>
        </condition>
        <property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
        <property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="${dist.jad}"/>
            <include name="${dist.jar}"/>
        </patternset>
    </target>
    
    <target name="cdc-init">
        <condition property="cdc-platform.trigger">
            <equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
        </condition>
        <available file="${manifest.file}" property="manifest.available"/>
        <condition property="main.class.applet">
            <equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
        </condition>
        <condition property="main.class.xlet">
            <equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
        </condition>
        <condition property="manifest.available+main.class+fat.jar">
            <and>
                <isset property="manifest.available"/>
                <isset property="main.class"/>
                <istrue value="${platform.fat.jar}"/>
                <not>
                    <equals arg1="${main.class}" arg2="" trim="true"/>
                </not>
            </and>
        </condition>
        <condition property="manifest.available+main.class">
            <and>
                <isset property="manifest.available"/>
                <isset property="main.class"/>
                <isfalse value="${platform.fat.jar}"/>
                <not>
                    <equals arg1="${main.class}" arg2="" trim="true"/>
                </not>
            </and>
        </condition>
        <condition property="application.version.invalid" value="true">
            <equals arg1="${deployment.number}" arg2="" trim="true"/>
        </condition>
        <fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
        <condition property="sign.jar.trigger" value="true">
            <and>
                <isset property="cdc-platform.trigger"/>
                <istrue value="${sign.enabled}"/>
            </and>
        </condition>
    </target>
    
    <target name="semc-pre-init" if="cdc-platform.trigger">
        <condition property="semc-platform.trigger">
            <equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
        <condition property="semc.icon.invalid" value="true">
            <or>
                <contains string="${semc.application.icon}" substring="$${"/>
                <equals arg1="${semc.application.icon}" arg2="" trim="true"/>
            </or>
        </condition>
        <condition property="no.certificateorkey" value="true">
            <or>
                <isset property="no.application.uid"/>
                <equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
                <contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
                <equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
                <contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
            </or>
        </condition>
        <property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
        <taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
            <classpath>
                <pathelement path="${libs.cdc-ant-utils.classpath}"/>
            </classpath>
        </taskdef>
        <taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
            <classpath>
                <pathelement path="${libs.semc-ant-utils.classpath}"/>
            </classpath>
        </taskdef>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="*.sis"/>
            <include name="*.SIS"/>
        </patternset>
    </target>
    
    <target name="savaje-pre-init" if="cdc-platform.trigger">
        <condition property="savaje-platform.trigger">
            <equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
        <property name="savaje.application.uid" value="TBD"/>
        <condition property="savaje.bundle.base.invalid" value="true">
            <or>
                <equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
                <contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
            </or>
        </condition>
        <condition property="savaje.unsupported.main" value="true">
            <or>
                <equals arg1="${main.class.applet}" arg2="true"/>
            </or>
        </condition>
        <condition property="savaje.icon.invalid" value="true">
            <or>
                <isset property="no.application.uid"/>
                <contains string="${savaje.application.icon}" substring="$${"/>
                <equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
            </or>
        </condition>
        <property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="bundle.jnlp"/>
            <include name="bundle.policy"/>
            <include name="lib/*"/>
        </patternset>
    </target>
    
    <target name="sjmc-pre-init" if="cdc-platform.trigger">
        <condition property="sjmc-platform.trigger">
            <equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
    
    <target name="ojec-pre-init" if="cdc-platform.trigger">
        <condition property="ojec-platform.trigger">
            <equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
    
    <target name="cdc-hi-pre-init" if="cdc-platform.trigger">
        <condition property="cdc-hi-platform.trigger">
            <equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
    
    <target name="nokiaS80-pre-init" if="cdc-platform.trigger">
        <condition property="nokiaS80-platform.trigger">
            <equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
        <property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
        <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
        <condition property="nokia.icon.invalid">
            <or>
                <contains string="${nokiaS80.application.icon}" substring="$${"/>
                <equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
            </or>
        </condition>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="${dist.jar}"/>
        </patternset>
    </target>
    
    <target name="pre-init"/>
    <target name="post-init"/>
    <target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
    
    <target name="conditional-clean-init">
        <uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
            <srcfiles dir="nbproject">
                <include name="project.properties"/>
                <include name="build-impl.xml"/>
            </srcfiles>
        </uptodate>
    </target>
    <target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
        <antcall target="do-clean" inheritall="true" inheritrefs="true"/>
    </target>
    
    <target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
    
    <target name="pre-preprocess"/>
    <target name="do-preprocess" unless="no.preprocess">
        <fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
        <property name="abilities" value=""/>
        <property name="debug.level" value="debug"/>
        <mkdir dir="${preprocessed.dir}"/>
        <echo message="ignore me" file="${build.dir}/.timestamp"/>
        <nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
        </nb-prep>
        <copy todir="${preprocessed.dir}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
        </copy>
        <nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
    </target>
    <target name="post-preprocess"/>
    <target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
    
    <target name="pre-compile"/>
    <target name="do-compile">
        <fail unless="build.classes.dir">Must set build.classes.dir</fail>
        <mkdir dir="${build.classes.dir}"/>
        <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
            <classpath>
                <path path="${libs.classpath}"/>
            </classpath>
        </javac>
        <copy todir="${build.classes.dir}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
        </copy>
        <nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
    </target>
    <target name="extract-libs" description="Extracts all bundled libraries.">
        <mkdir dir="${build.classes.dir}"/>
        <nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
    </target>
    <target name="post-compile"/>
    <target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
    
    <target name="pre-compile-single"/>
    <target name="do-compile-single">
        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
        <mkdir dir="${build.classes.dir}"/>
        <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
            <classpath>
                <path path="${libs.classpath}"/>
            </classpath>
        </javac>
    </target>
    <target name="post-compile-single"/>
    <target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
    
    <target name="proguard-init" description="Up-to-date check before obfuscation.">
        <property name="obfuscation.level" value="0"/>
        <condition property="no.obfusc">
            <or>
                <equals arg1="${obfuscation.level}" arg2="0"/>
                <uptodate targetfile="${obfuscator.destjar}">
                    <srcfiles dir="${buildsystem.baton}"/>
                </uptodate>
            </or>
        </condition>
        <uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
            <srcfiles dir="${buildsystem.baton}"/>
        </uptodate>
    </target>
    <target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
        <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
        <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
    </target>
    <target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
        <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
        <fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
        <fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
        <property name="obfuscator.classpath" value=""/>
        <dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
        <dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
        <mkdir dir="${obfuscator.srcjar.dir}"/>
        <mkdir dir="${obfuscator.destjar.dir}"/>
        <jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
        <property name="obfuscation.custom" value=""/>
        <nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
        <mkdir dir="${obfuscated.classes.dir}"/>
        <unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
        <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
    </target>
    
    <target name="pre-obfuscate"/>
    <target name="post-obfuscate"/>
    <target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
    
    <import file="lwuit.xml" optional="true"/>
    <target name="-lwuit-check">
        <condition property="lwuit.allowed">
            <and>
                <available file="nbproject/lwuit.xml"/>
                <isset property="is.mesdk_lwuit"/>
            </and>
        </condition>
    </target>
    <target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
    <target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
        <antcall target="lwuit_build"/>
    </target>
    <target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
    <target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
    
    <target name="pre-preverify"/>
    <target name="do-preverify" if="cldc-platform.trigger">
        <fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
        <mkdir dir="${preverify.sources.dir}"/>
        <copy todir="${preverify.sources.dir}">
            <fileset dir="${buildsystem.baton}" includes="**/*.class"/>
        </copy>
        <mkdir dir="${preverify.classes.dir}"/>
        <nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
        <copy todir="${preverify.classes.dir}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
        </copy>
        <nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
    </target>
    <target name="post-preverify"/>
    <target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
    
    <target name="set-password-init">
        <property name="sign.enabled" value="false"/>
        <condition property="skip-sign-keystore-password-input">
            <or>
                <isfalse value="${sign.enabled}"/>
                <and>
                    <isset property="sign.keystore"/>
                    <isset property="sign.keystore.password"/>
                    <not>
                        <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                    </not>
                    <not>
                        <equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
                    </not>
                </and>
            </or>
        </condition>
        <condition property="skip-sign-alias-password-input">
            <or>
                <isfalse value="${sign.enabled}"/>
                <and>
                    <isset property="sign.keystore"/>
                    <isset property="sign.alias"/>
                    <isset property="sign.alias.password"/>
                    <not>
                        <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                    </not>
                    <not>
                        <equals arg1="${sign.alias}" arg2="" trim="true"/>
                    </not>
                    <not>
                        <equals arg1="${sign.alias.password}" arg2="" trim="true"/>
                    </not>
                </and>
            </or>
        </condition>
    </target>
    <target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
        <nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
    </target>
    <target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
        <nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
    </target>
    <target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
    
    <target name="add-configuration" unless="contains.manifest.configuration">
        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
        <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
    </target>
    <target name="add-profile" unless="contains.manifest.profile">
        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
        <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
    </target>
    <target name="create-jad" if="cldc-platform.trigger">
        <fail unless="dist.jad">Must set dist.jad</fail>
        <mkdir dir="${build.dir}"/>
        <dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
        <mkdir dir="${dist.jad.dir}"/>
        <condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
            <not>
                <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
            </not>
        </condition>
        <condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
            <not>
                <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
            </not>
        </condition>
        <condition property="contains.manifest.configuration">
            <contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
        </condition>
        <condition property="contains.manifest.profile">
            <contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
        </condition>
        <property value="" name="evaluated.manifest.apipermissions"/>
        <property value="" name="evaluated.manifest.pushregistry"/>
        <property name="manifest.jad" value=""/>
        <property name="manifest.manifest" value=""/>
        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
        <nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
        <antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
        <antcall target="add-profile" inheritall="true" inheritrefs="true"/>
        <property name="manifest.available" value="true"/>
    </target>
    
    <target name="do-extra-libs" if="extra.classpath">
        <property name="dist.lib.dir" value="${dist.dir}/lib"/>
        <mkdir dir="${dist.lib.dir}"/>
        <copy todir="${dist.lib.dir}">
            <path path="${extra.classpath}"/>
            <flattenmapper/>
        </copy>
    </target>
    
    <target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
        <fail message="Main class is not set!">
            <condition>
                <equals arg1="${main.class}" arg2="" trim="true"/>
            </condition>
        </fail>
        <mkdir dir="${build.dir}/j9"/>
        <taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
        <j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
        <copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
        <property name="manifest.available" value="true"/>
        <loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
    </target>
    <target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
        <pathconvert property="logo.icon.name" pathsep=" ">
            <path path="${nokiaS80.application.icon}"/>
            <chainedmapper>
                <flattenmapper/>
                <globmapper from="*" to="*"/>
            </chainedmapper>


The error says class file is missing, you can try to clean and build.

Labview: resource not found error code 24 when building executable using 8.20 and dsc module

I am trying to build an executable and I keep getting and error and cannot seem to figure out what is wring. The whole error is "LabVIEW: resource not found. An error occured loading "interface 3.vi" Labview load error code 24: this vi cannot be loaded because it is broken and has no block diagram."
I am using LV 8.20 and DSC 8.2. I am trying to create an executable that has the web server running for using remote panels, i have netowrk published shared variables, connecting to a fieldpoint unit, and I am using the NI system tray icon vis to load the program to the system tray.
I have my shared variable library added as a support file, as well as the lvdsc.ini, and the tray icon files. I have sleected "Enable Enhacned DSC run time support" in the app builder, did not remove any type def,etc.
I cannot get the .exe to run on my development machine or another machine, I get the same error. I tried creating an installer that installed the 8.2 runtime, dsc,fieldpoint, variable engine and manager and MAX.
I could not find anything in the help files on the dsc, maybe someone else has some hints. thanks
Kenny

Hi Kenny,
I hope you are doing well today! What is interface 3.vi? Is it possible for you to post your project over here? Also, I would recommend creating a simple DSC application; and would like you to build it. Do you still get errors?
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Where to find all error codes of Report Builder 6i ?

Hello,
can anybody tell me, where i can
find the error codes for oracle
Report Builder 6i ?
Greetings
Thorsten Lorenz

See for 'REP messages' in help menu.

Error code -13 when building installer

Hello,
I need some help! I am trying to create an installer for my application; which was created with no problems; but I keep getting a message about an error code -13. I'm adding an image of the message since it is a long one. I really don't understand what the error means or how to repair it. Any help I could get is appreciated!

Hello rd.mcdt,
The following link has information about a similar problem, could you try to follow the process described on the link? Please look for error code 13 instead error code 30 and let us know if this helps.
Error 30 Occurred at CDK_CreateNewWizard_Invoke.vi.ProxyCaller When Trying To Build a LabVIEW Installer:
http://digital.ni.com/public.nsf/allkb/8E5E6C58C625B88A8625786A005B21E0
Best Regards
David P.
National Instruments
Applications Engineer
www.ni.com/soporte

Getting Windows SDK function returned an error. (Error code -12) while building the D-kit

Hi,
I use LabWindows CVI 8.5 to build the D-kit in windows xp os.when i try to build the D-kit it is throwing the following error.i have attached the error log along with this post.request to provide solution to over come this issue ASAP.it is very urgent.Thanks in advance
Regards
Parthipan
Attachments:
errorlog.txt ‏1 KB

I have not a direct experience on distribution kit, but the error seems related to the absence of NI-DMM 3.0.2 disk in your CD reader (D: could it be the cause?
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

System error in routine FI_TAX_CHK_PRICING_DATA error code 13

hi
i m new in sap.when i try posting in gl i got the following error messege
system error in routine FI_TAX_CHK_PRICING_DATA error code 13 function builder tax2
can some one help me out

go to ox02 company code and mention your country.just go to company code data and put ur county there.

Execution failed with error code 1

I am developing a simple Hello Server Application using the latest Netbeans 7.0 (Full Version that includes J2SE, J2ME,...etc). The code compiles fine and runs great on a Windows 7 SP1 (32-bit) just fine. but when trying to run it on a Windows 7 SP1 (64-bit) Windows, I get the following error:
Jad URL for OTA execution: http://localhost:8082/servlet/org.netbeans.modules.mobility.project.jam.JAMServlet/E%3A/Development/NetBeansProjects/HelloServer/dist//HelloServer.jad
Starting emulator in execution mode
E:\Development\NetBeansProjects\HelloServer\nbproject\build-impl.xml:915: Execution failed with error code 1.
BUILD FAILED (total time: 0 seconds)
the content of build-impl.xml:915 is:
<nb-run jadfile="${dist.dir}/${dist.jad}" jarfile="${dist.dir}/${dist.jar}" jadurl="${dist.jad.url}" device="${platform.device}" platformhome="${platform.home}" platformtype="${platform.type}" execmethod="${run.method}" securitydomain="${evaluated.run.security.domain}" commandline="${platform.runcommandline}" classpath="${platform.bootclasspath}:${dist.dir}/${dist.jar}" cmdoptions="${run.cmd.options}"/>
This makes me believe that it is something related to 32/64 bit Java Platform for Windows. I have searched the net, and some posts suggest uninstalling Java 64-bit version for Windows and use 32-bit version instead? Is this true? if it is then we have a serious JAVA bug problem if not, I would like to get pointers on how to solve this problem. Thanks.

It seems that indeed this has to do with the 64-bit JAVA platform version as well as the DEP protection on Windows 7. I will try to reproduce the error systematically and see how it goes.

Smartview Issue in Function Builder

Hello Guys,
We are upgrading our Smart view from 11.1.2.1.103_PSE13709867 to 11.1.2.2.310. But while testing the function builder, I found some strange behaviors.
When I try to modify an existing formula it throws error in the function builder window. Although the existing formula fetches the correct data from HFM in both the versions.
While editing if I replace any member selection with a cell reference, it will show the correct member there, but once you click "Ok" and again re-open function builder, you will find an extra double quotes (") in the syntax.
Eg: Existing Formula: *"Scenario#AC"*
Edited and Validated Formula: *"Scenario#"&BK140*
After reopening Function Builer: *"Scenario#"&BK140*"*
The extra double quotes at the end fails the validation.
Did you face any issues like this? Any Workaround or it's just a annoying bug....
Thanks in advance.
//Sandip

What version of MS Office do you have? Earlier versions of Office (2003 for example) is a bit buggy with System 11.

Error code on target machine.

I created a custom error code file on my development machine and included in my build. Is there a way to access this custom error code file on my target??
I know the directory struct is different on the target and made the mistake of hard coding in the path on my devellopment machine. What I'm trying to do is print out the custom error if and when the test encounters one. I could create a custom error code.txt then look for the right error code then send it to the print...which is what I do on the development machine but how is it done on a target??

kind of...doesn't the exe/build/installer/project ( on my development machine) bundle all that data such that I don't have access to it?? If I included the custom error code in my build/installer what directory is it in on my target?? If I encounter an error on my target I want to print out that custom error. How would you do that? I don't know where the custom error file is on my target to point my print out vi to it so it can get that code ( after seaching the custom error code.txt file)
I edited/modified it on my develope so I knew where it was. I then hard coded my path in my print out vi to that directory struct. When I port my exe to my target that directory struct is no longer valid.
My question is can I use the custom error codes in my exe some how to print out the current error
OR
would I be better off porting over the custom error code.txt to a known directory on my target then hard coding it in on my developement machine...making both dir struct the same on develop and target

Preverification failed with error code 255

Hello,
I am having some problems to run a simple Hello World MIDlet application on Ubuntu (2.6.20-15-generic #2 SMP Sun Apr 15 06:17:24 UTC 2007 x86_64 GNU/Linux). I am using Netbeans 6 Beta 2 (with Mobility Pack 2.5.2 ).
I am getting an error in the preverification process:
Preverifying 1 file(s) into /home/brunogh/NetBeansProjects/MobileApplication3/build/preverified directory.
/home/brunogh/NetBeansProjects/MobileApplication3/nbproject/build-impl.xml:424: Preverification failed with error code 255.
I am not sure if it could be a WTK problem, Mobility Pack problem or anything else... I've googled and could not find anything with the error 255, just with the error 1... any ideas/suggestions?
The whole output is below
pre-init:
pre-load-properties:
exists.config.active:
exists.netbeans.user:
exists.user.properties.file:
load-properties:
exists.platform.active:
exists.platform.configuration :
exists.platform.profile:
basic-init:
cldc-pre-init:
cldc-init:
cdc-init:
ricoh-pre-init:
ricoh-init:
semc-pre-init:
semc-init:
savaje-pre-init:
savaje-init:
nokiaS80-pre-init:
nokiaS80-init:
nsicom-pre-init:
nsicom-init:
post-init:
init:
conditional-clean-init:
conditional-clean:
pre-clean:
clean-timestamp:
clean-preprocessed:
clean-classes:
Deleting directory /home/brunogh/NetBeansProjects/MobileApplication3/build/compiled
clean-obfuscated:
clean-preverified:
Deleting directory /home/brunogh/NetBeansProjects/MobileApplication3/build/preverifysrc
Deleting directory /home/brunogh/NetBeansProjects/MobileApplication3/build/preverified
clean-manifest:
clean-jar:
clean-jad:
clean-javadoc:
clean-j9:
clean-ricoh:
clean-semc:
clean-savaje:
post-clean:
do-clean:
deps-jar:
pre-preprocess:
do-preprocess:
post-preprocess:
preprocess:
pre-compile:
extract-libs:
Created dir: /home/brunogh/NetBeansProjects/MobileApplication3/build/compiled
do-compile:
Compiling 1 source file to /home/brunogh/NetBeansProjects/MobileApplication3/build/compiled
post-compile:
compile:
pre-obfuscate:
proguard-init:
proguard:
Building jar: /home/brunogh/NetBeansProjects/MobileApplication3/build/before-obfuscation.jar
ProGuard, version 4.0.1
Reading program jar [home/brunogh/NetBeansProjects/MobileApplication3/build/before- obfuscation.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/wma20.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr082.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/j2me-xmlrpc.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/satsa- jcrmi.jar]
Note: duplicate definition of library class [java.rmi.Remote]
Note: duplicate definition of library class [java.rmi.RemoteException]
Reading library jar [home/brunogh/WTK2.5.1/lib/satsa-apdu.jar]
Note: duplicate definition of library class [ com.sun.satsa.acl.ACEntry]
Note: duplicate definition of library class [com.sun.satsa.acl.ACFile]
Note: duplicate definition of library class [com.sun.satsa.acl.ACLFileReader]
Note: duplicate definition of library class [ com.sun.satsa.acl.ACLPermissions]
Note: duplicate definition of library class [com.sun.satsa.acl.ACList]
Note: duplicate definition of library class [com.sun.satsa.acl.APDUPermissions]
Note: duplicate definition of library class [ com.sun.satsa.acl.AccessControlManager]
Note: duplicate definition of library class [com.sun.satsa.acl.JCRMIPermission]
Note: duplicate definition of library class [com.sun.satsa.acl.JCRMIPermissions]
Note: duplicate definition of library class [ com.sun.satsa.acl.PINAttributes]
Note: duplicate definition of library class [com.sun.satsa.acl.PINData]
Note: duplicate definition of library class [com.sun.satsa.acl.PINEntryDialog]
Note: duplicate definition of library class [ java.lang.UnsupportedOperationException]
Reading library jar [home/brunogh/WTK2.5.1/lib/satsa-crypto.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr179.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/satsa- pki.jar]
Note: duplicate definition of library class [com.sun.satsa.acl.ACEntry]
Note: duplicate definition of library class [com.sun.satsa.acl.ACFile]
Note: duplicate definition of library class [com.sun.satsa.acl.ACLFileReader ]
Note: duplicate definition of library class [com.sun.satsa.acl.ACLPermissions]
Note: duplicate definition of library class [com.sun.satsa.acl.ACList]
Note: duplicate definition of library class [com.sun.satsa.acl.APDUPermissions ]
Note: duplicate definition of library class [com.sun.satsa.acl.AccessControlManager]
Note: duplicate definition of library class [com.sun.satsa.acl.JCRMIPermission]
Note: duplicate definition of library class [ com.sun.satsa.acl.JCRMIPermissions]
Note: duplicate definition of library class [com.sun.satsa.acl.PINAttributes]
Note: duplicate definition of library class [com.sun.satsa.acl.PINData]
Note: duplicate definition of library class [ com.sun.satsa.acl.PINEntryDialog]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr75.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr180.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr238.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr229.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/j2me-ws.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr234.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr226.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr184.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/mmapi.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr239.jar]
Note: duplicate definition of library class [ java.lang.UnsupportedOperationException]
Reading library jar [home/brunogh/WTK2.5.1/lib/jsr211.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/cldcapi10.jar]
Reading library jar [home/brunogh/WTK2.5.1/lib/midpapi10.jar]
Note: duplicate definition of library class [com.sun.cldc.i18n.j2me.UTF_8_Reader]
Note: there were 29 duplicate class definitions.
Preparing output jar [home/brunogh/NetBeansProjects/MobileApplication3/build/obfuscated.jar]
Copying resources from program jar [home/brunogh/NetBeansProjects/MobileApplication3/build/before-obfuscation.jar]
Created dir: /home/brunogh/NetBeansProjects/MobileApplication3/build/obfuscated
Expanding: /home/brunogh/NetBeansProjects/MobileApplication3/build/obfuscated.jar into /home/brunogh/NetBeansProjects/MobileApplication3/build/obfuscated
post-obfuscate:
obfuscate:
pre-preverify:
do-preverify:
Created dir: /home/brunogh/NetBeansProjects/MobileApplication3/build/preverifysrc
Copying 1 file to /home/brunogh/NetBeansProjects/MobileApplication3/build/preverifysrc
Created dir: /home/brunogh/NetBeansProjects/MobileApplication3/build/preverified
Preverifying 1 file(s) into /home/brunogh/NetBeansProjects/MobileApplication3/build/preverified directory.
/home/brunogh/NetBeansProjects/MobileApplication3/nbproject/build- impl.xml:424: Preverification failed with error code 255.
BUILD FAILED (total time: 5 seconds)
Thanks,
Bruno

pre-init:
pre-load-properties:
exists.config.active:
exists.netbeans.user:
exists.user.properties.file:
load-properties:
exists.platform.active:
exists.platform.configuration:
exists.platform.profile:
init:
post-init:
pre-preprocess:
deps-jar:
conditional-clean:
pre-clean:
do-clean:
post-clean:
preprocess:
Created dir: C:\prakash\sip\build\preprocessed
Pre-processing 2 file(s) into C:\prakash\sip\build\preprocessed directory.
post-preprocess:
extract-libs:
Created dir: C:\prakash\sip\build\compiled
pre-compile:
compile:
Compiling 2 source files to C:\prakash\sip\build\compiled
Copying 1 file to C:\prakash\sip\build\compiled
post-compile:
obfuscate-check:
pre-obfuscate:
obfuscate:
Building jar: C:\prakash\sip\build\before-obfuscation.jar
Copying jar file (C:\prakash\sip\build\before-obfuscation.jar) to C:\prakash\sip\build\obfuscated.jar.
Created dir: C:\prakash\sip\build\obfuscated
Expanding: C:\prakash\sip\build\obfuscated.jar into C:\prakash\sip\build\obfuscated
post-obfuscate:
pre-preverify:
preverify:
Created dir: C:\prakash\sip\build\preverified
Preverifying 1698 file(s) into C:\prakash\sip\build\preverified directory.
Error preverifying class com.sun.midp.jadtool.AppDescriptor
VERIFIER ERROR com/sun/midp/jadtool/AppDescriptor.storeKeyStore(Ljava/lang/String;[C)V:
Cannot find class java/io/FileOutputStream
C:\prakash\sip\nbproject\build-impl.xml:269: Preverification failed with error code 1.
BUILD FAILED (total time: 1 minute 7 seconds)
Question:
how can i resolve this problem?
can anyone help me? .........

Preverification failed with error code 255 on Mac OS

Hello all,
First up cheers to sun for creating the JME Platform SDK for MAC OS X. I downloaded and installed it the other day. All went well until I tried to compile the blasted thing and I got the following error. I've searched online and come up with nothing.
/../nbproject/build-impl.xml:309: Preverification failed with error code 255.
        at org.netbeans.mobility.antext.PreverifyTask.execute(PreverifyTask.java:226)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
        at sun.reflect.GeneratedMethodAccessor32.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.Target.execute(Target.java:357)
        at org.apache.tools.ant.Target.performTasks(Target.java:385)
        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
        at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
        at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
        at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
        at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:278)
        at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:497)
        at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)Apparently the error is in the build-impl.xml file. When I looked in this file the following line was the one giving me guff.
        <nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>Anyone have any ideas??
Cheers.

pre-init:
pre-load-properties:
exists.config.active:
exists.netbeans.user:
exists.user.properties.file:
load-properties:
exists.platform.active:
exists.platform.configuration:
exists.platform.profile:
init:
post-init:
pre-preprocess:
deps-jar:
conditional-clean:
pre-clean:
do-clean:
post-clean:
preprocess:
Created dir: C:\prakash\sip\build\preprocessed
Pre-processing 2 file(s) into C:\prakash\sip\build\preprocessed directory.
post-preprocess:
extract-libs:
Created dir: C:\prakash\sip\build\compiled
pre-compile:
compile:
Compiling 2 source files to C:\prakash\sip\build\compiled
Copying 1 file to C:\prakash\sip\build\compiled
post-compile:
obfuscate-check:
pre-obfuscate:
obfuscate:
Building jar: C:\prakash\sip\build\before-obfuscation.jar
Copying jar file (C:\prakash\sip\build\before-obfuscation.jar) to C:\prakash\sip\build\obfuscated.jar.
Created dir: C:\prakash\sip\build\obfuscated
Expanding: C:\prakash\sip\build\obfuscated.jar into C:\prakash\sip\build\obfuscated
post-obfuscate:
pre-preverify:
preverify:
Created dir: C:\prakash\sip\build\preverified
Preverifying 1698 file(s) into C:\prakash\sip\build\preverified directory.
Error preverifying class com.sun.midp.jadtool.AppDescriptor
VERIFIER ERROR com/sun/midp/jadtool/AppDescriptor.storeKeyStore(Ljava/lang/String;[C)V:
Cannot find class java/io/FileOutputStream
C:\prakash\sip\nbproject\build-impl.xml:269: Preverification failed with error code 1.
BUILD FAILED (total time: 1 minute 7 seconds)
Question:
how can i resolve this problem?
can anyone help me? .........

F-03....FI_TAX_GET_MWSKZ_EXISTENCE error code 12 function builder TAX2

Similar Messages

Maybe you are looking for