F-03 gl taging

hi,
I am using t-code f-03 for gl clearing but i have problem that i have number of entries with different profit center i want to tag that entry by profitcenter wies how can i can do that? or tell if any other method to tag entry by profitcenter wise

Hi,
I think standard SAP functionality will not provide for what you are asking for.If this is a must, you have to develop a Z report including profit center as a selection criteria.But what I know its a huge task.Do only if necessary.
Aravind

Similar Messages

Where is the config file for taging spam?

I've had my server setup at home for a couple days. I used to use SuSE. My spam is now pretty much out of control where it wasn't before.
I have my settings right now set for 2 hits to delete as spam. That's not really helping. Where are the spamassassin tests located? On my SuSE box I was able to look at all the tests and change the tagging value. I can't find it here. I can't find the user prefs either. After outputting the config, I see user_prefs are listed under ~./spamassassin/user_prefs. I take it that's root's setup?
Thanks,
Tom

On OS X Server, spamassassin is called by amavisd which runs as user _amavisd
It is simplest to use the common location:
/etc/mail/spamassassin
In there you can add rules, change scores, etc.
By editing /etc/amavisd.conf, you can change certain behaviours. For more info see here: http://www200.pair.com/mecham/spam/amavisd-settings.html
That said, first make sure Postfix blocks as much as possible before handing messages to the content filter. For a guide see here: Frontline spam defense for Mac OS X Server
HTH,
Alex

When using Firefox 3.6 my Norton Security Suite taged each site with a green circle if it deemed the site safe and secure - Firefox 4.0 does not show this protection o

When I was running Firefox 3.6 my Norton security Suite marked each site with a green circle to indicate to me that they felt that the site was safe to go to. They also indicated the sites that they protected with a yellow rectangle.
When I switched to Firefox 4.0 those markers no longer appear.
Really would like to have that sense of security back.
What do I need to do to get Norton back on the job with Firefox

Symantec have released updates for Norton 360 and Norton Internet Security to make them compatible with Firefox 4, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894

Hard drive crashed, catalog is ok (other drive). I've renamed/taged/noted 20 000 photos in that month! Do I have to start over?

I've done so much work in that last month. Can I use my "up to date" catalog to make Lightroom "reorganize" my files?
If not I will have to use my old catalog and my old files directory...to start over!
Thanks!!

Hi! Nope, Catalog is up to date. I've lost all photos since my reorganisation/renaming/tagging i've done in lightroom. My backup of those files is one month old.
So I still have my "old" files and old catalog is also availlable so I could start over again but i'ts a lot of time/work...But can I use my new Catalog to recover?

Bring back old information taging in iTunes

Im i the only one how do not like the new tagging information whith iTunes 10.0.1.26?

iTunes 10 is over 4 years old...
What’s wrong with tagging?

Problem with route-policy and taging

Hey!
I'm trying to apply the following configuration but are receving the follow error:
!!% Policy [aggregate-routes] uses the 'tag' attribute. There is no 'tag' attribute at the bgp aggregation-dflt attach point.
route-policy aggregate-routes
set community test
set community test1
if tag eq 1000 then
set community (65000:1,65000:2,65000:3)
endif
end-policy
router static
address-family ipv4 unicast
10.1.1.0/24 Null0 tag 1000
router bgp 65000
address-family ipv4 unicast
aggregate-address 10.1.1.0/24 route-policy aggregate-routes

Hello.
Please find set/match attributes per attach point in the following document - http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-2/routing/configuration/guide/b_routing_cg42asr9k/b_routing_cg42asr9k_chapter_0110.html#con_1240966
Match tag is not supported for the attach point.

Some mp3 files do not show up on creative centrale

i have some mp3 files that work and are fine on the pc but when i try and open the file on centrale there is nothing in the folder - these files are taged so it cant be that? they are downloaded from the internet and are not from a music cd? so they dont have gracenote recognition - is this the reason ?
thanks if anyone can help

I don?t think that is the reason. I think there is some problem with the synchronization.

Creation of cost element or not for GBB-VAX,GBB-INV and UMB

Dear Experts,
I have few doubt regarding creation of cost element. Whether i will create Cost element or not.
1) GBB-VAX - used in PGI(Vl02n)We have costing based COPA .whether we will create cost element or not.If i will create cost element then need to be bydefault in okb9 with PSG tick.
2) GBB-INV- Used for Material taging(MI01,MI04,MI07)whether we will create cost element or not.If i will create cost element then what will be my cost object and how i will charge from my product costing.
3) UMB- is used whenever standard price is changed. Shall i create cost element for the same
If yes hen what will be my cost object and how i will charge from my product costing.
Request you to help me on the same.
regards
RR

1) GBB-VAX - No, Goods Issue for sales order with no assignment object and hence without Cost Element
2) GBB-INV- Yes to post expenditure/income from inventory differences
3) UMB- Yes
Regards
KS

My MacBook Pro 17" was stolen. How do I communicate to you that this particular computer was stolen incase someone brings it in for service or updates? Thanks, Morris

My MacBook Pro 17" was stolen on Feb. 22, 2012: Model # A***9; Serial #W8*******94
How do I flag this computer with you in case someone tries to bring it in for service?
Thanks, Morris
<Serial Edited by Host>

EMDAVIS, I just went through this. Report it stolen through the proper police. Then have the police call them call Apple with the Police report and request that the Serial number is taged. The local detective here said it took 3 phone calls. It also helped that I used iCloud to wipe the computer so the person who has it now may need service. Good luck EMDAVIS. Sorry for your loss!

How to see Photos on a external hard drive from diffrent computers?

My wife uses a laptop to down load all of our photos on to an enternal hard drive. I have the same Adobe 5.0 on my desktop as her laptop. I would like to know how to view and if possable organize and edit the photos on the hard drive form my desktop ?
Thanks, Jeff

And I know I can see the photos on the drive, but I realy need to see the photos that have been taged by the other computer to make it easier to find them.

Sharepoint Online Tag Profile empty

Hello there.
We have been facing the following problem in Sharepoint Online.
We have created a document library and populated it with documents. For each document we have added some tags. We have also enabled "save
metadata on this list as social tags" in the library settings. Furthermore we created a tag cloud webpart on the home page of the site.
The tag cloud populates fine, that is, the tags are displayed correctly.
However when clicking on a tag, we are taken to the tag profile page. The tagged articles are not displayed as expected that they should.
Tagged articles are only displayed under the "popular within past 60 days" link. When clicking the "All" link, we get a
message saying "There are no available items tagged with <keyword>"
What's weird with this, is that it used to work and it somehow stopped a couple of days ago. Articles that were indexed a couple of days ago are shown under the "All" link. Any other article we tag is not shown.
Any ideas on how to resolve this?
Thanks in advance!

Hi
We are having a similar issue in that the tag cloud appears but when anyone of the tags in the cloud is clicked, we are taken to the
my_site/tagprofile.aspx?termid=XXXXXXXXXXXXXXXXXXX page but we just get the message
There are no available items taged with #tagname.
Clicking the Popular within the last 60 days doesn't return any results either.
I've set both the timer jobs in Aditya Gandhe's response to run every 10 minutes and they are completing successfully.
Can anyone suggest anything else?

Newsletter 6-13-04

THERE'S A VERY GOOD REASON WHY IT'S LATE....
Arch Linux Weekly Newsletter
*Jason Chu and Ben Mazer*
Opening
Welcome to the Arch Linux Newsletter. This attempts to give you an ``at
a glance'' look at the world of Arch Linux.
News
This Week in Dev Land
1. Dale has received a script to let firebird and thunderbird play
nice. He's looking at adding them now.
2. Arjan is busy right now. Everyone else is trying to pick up his
slack.
3. Functional specifications are nearly complete for the new AUR system.
ArchStats Updates
/To participate, visit:/ http://archstats.coding-zone.com/
Number of registered systems: 450
Date first system was registered: 20031017
Most recent update occurred: 20040615
Longest recorded uptime: 175 days, 22 hours, 51 minutes, 55 seconds.
Average uptime: 5 days, 1 hours, 51 minutes, 45 seconds.
Least packages installed on a system: 44
Average installed packages: 263
Most packages installed on a system: 733
Discussions
Forum Highlights
1. Benedict_White has been working on porting Webmin to Arch. Check
on his progress in this thread:
http://bbs.archlinux.org/viewtopic.php?t=5042.
2. DP has solved the GL.la problem that has plagued many users. He
has provided a simple file to install on your system to replace
the missing library. Read the thread here:
http://bbs.archlinux.org/viewtopic.php?t=5124.
Mailing List Highlights
1. The debate was raised again about packaging quality. Jlowell
criticized the developers, stating that there have been too many
broken packages. More of the same points were raised, including
having the developers focus more on developing the base, and less
on the packaging. Read the whole thread here:
http://www.archlinux.org/pipermail/arch … 01625.html.
2. I semi-seriously asked about the possibility of bittorrent
integration with pacman. It would save the developers bandwidth
and give the users a way to contribute. There would be many
technical issues with a bittorrent system. Read the thread here:
http://www.archlinux.org/pipermail/arch … 01670.html.
3. tsykoduk asked about adding changelogs to the packages or
PKGBUILDs. It was decided that the CVS changelogs were sufficient.
Read the thread here:
http://www.archlinux.org/pipermail/arch … 01647.html.
Packages
Package Highlights
1. KDE 3.2.3 was packaged this week. This should fix most of the
problems people have been having with KDE. Read the announcement
here: http://kde.org/announcements/announce-3.2.3.php.
New Packages
speex 1.1.5-1
enigma 1.04-1
fontconfig 2.2.1-2
glibc 2.3.3-1t2
squirrelmail 1.5.1cvs-1
spamassassin 2.63-6
kdetv 0.8.1-1
amarok 1.0beta4-1
m4 1.4.1-1
gimp-gap 2.0.2-1
gimp-help-2 0.3-1
gimp-freetype 0.6-1
bogofilter 0.91.1-1
phpmyadmin 2.5.7-1
ghex 2.6.1-1
openbox 3.2-3
apollon 0.9.4-3
quanta 3.2.3-1
kdevelop 3.0.4-1
sylpheed-claws 0.9.11-1
mozilla-thunderbird 0.6-2
vim 6.3-2
ttf-ms-fonts 1.3-5
subversion 1.0.5-1
iputils 021109-2
iputils 021109-3t1
lcms 1.13-1
xsane 0.94-3
cvs 1.11.17-1
mlterm 2.8.0-5
jed 0.99.16-1
kdeaccessibility 3.2.3-1
kdesdk 3.2.3-1
kdetoys 3.2.3-1
kdeutils 3.2.3-1
kdemultimedia 3.2.3-1
kdenetwork 3.2.3-1
kdepim 3.2.3-1
kdegames 3.2.3-1
kdegraphics 3.2.3-1
kdelibs 3.2.3-1
kdebase 3.2.3-1
kdebindings 3.2.3-1
kdeedu 3.2.3-1
kdeaddons 3.2.3-1
kdeadmin 3.2.3-1
kdeartwork 3.2.3-1
arts 1.2.3-1
xawtv 3.93-1
expect 5.41.0-1
gvim 6.3-1
xmms-cdparanoia 0.1-1
gv 3.5.8-4
irssi 0.8.9-4
imagemagick 6.0.2-1
taglib 1.1-1
STAGING Listing
/To get access to this, and other repos, visit http://tur.archlinux.org/
giftui 0.4.1-s1
briquolo 0.4.2-1
tutris 1.0.1-s1
straw 0.23-1
qtparted 0.4.4-s1
workrave 1.4.1-s1
opera 7.51-s1
sim 0.9.3-s1
gxine 0.3.3-s1
taged 3.0-s1
gmencoder 0.1.0-s1
aspell-fr 0.50.1-1
cmf 1.4.2-s1
gnotime 2.1.7-s1
smb4k 0.4.0-s1
gp 0.26-1
gtk-smooth-engine 0.5.6-s1
windowlab 1.23-s1
crypto++ 5.1-s1
gtkglextmm 1.0.1-s1
libgnomecups 0.1.8-s1
muine 0.6.2-s1
ion-devel 20030814-1
gocr 0.39-s1
kbarcode 1.6.1-s1
ksambaplugin 0.5b2-1
oooqs 2.0.3-s1
libchipcard 0.9.1-1
plone 2.0-s1
kmyfirewall 0.9.6.2-s1
ether-wake 1.09-1
gxmame 0.34b-1
libofx 0.6.4-1
fortune-mod-dune-quotes 2.0.1-s1
gtweakui 0.0.6-s1
lwm 1.2.0-1
nvidia 1.0.5336-s1
materm 0.1-1
lablgtk 1.2.6-s1
monopd 0.9.0-s1
mp3burn 0.3.1-1
ntfsprogs 1.9.2-s1
ocaml 3.07pl2-s1
parse-yapp 1.05-1
kshutdown 0.1.7-s1
pixieplus 0.5.4-1
ooqstart 0.8.3-s1
logjam 4.4.0-s3
replace 2.22-s1
prizm 0.2-s1
bittornado 0.3.2-s1
pygtkglext 1.0.1-s1
xmms-vqf 0.94-s1
scribus-docs 1.0.1-s1
seahorse 0.7.3-2
shaaft 0.5.0-1
supertux 0.1.1-s1
synaptics 0.13.2-s1
hwd 2.2-s1
spe 0.4.2c-s1
gifsicle 1.40-1
texmacs 1.0.3.3-s1
tse3 0.2.7-1
unison 2.9.1-s1
universalkopete 0.1-1
streamtuner-xiph 0.1.0-s1
streamtuner-python 0.1.2-s1
xml-dom 1.43-1
xml-regexp 0.03-1
xml-xql 0.68-1
xtermset 0.5.1-s1
xv 3.10a-1
xymms 0.9.1-s1
sip 3.10.1-s1
qscintilla 1.2-s1
tnftp 20030825-1
imms 1.1-s1
adns-python 1.0.0-1
digikam 0.6.1-s1
htmldoc 1.8.23-1
si3d 1.2-1
xfree86-freefonts-fonts 0.10-1
pil 1.1.4-s1
esmtp 0.5.0-1
gkrellm_amiconnected 0.6-1
gkrellmseti 0.7.0b-1
meld 0.9.1-1
msmtp 0.7.1-1
nautilus_thumbnailers 0.0.3-1
njam 1.00-1
gtk-sharp 0.93-s1
dosemu 1.2.1-s1
digikamplugins 0.6.1-s2
pyxml 0.8.3-s1
skencil 0.6.16-s1
bfilter 0.9.3-1
wtf 0.0.4-s1
amule 1.2.6-s2
jack-audio-connection-kit 0.91.1-2
gnome-cups-manager 0.18-s1
fbpager 0.1.4-s1
mpd 0.10.3-s1
pychecker 0.8.14-s1
py-libmpdclient 0.10.0-s1
cups-pdf 1.4.2a-s1
3ddesktop 0.2.5-s1
scribus-devel 1.1.7-s1
sip 4.0rc3-s1
pyqt 3.11-s1
qalculate 0.5.1-s1
soundtracker 0.6.7-s1
tla 1.2-s1
pycrypto 1.9a6-s1
emelfm2 0.0.7-s2
sylpheed-gtk2 0.9.9-s2
lyx-qt 1.3.4-s1
kradio 0.3.0-2
eric 3.4.1-s1
Problems
FAQ
Q: I'm trying to compile something (in C++), but I'm getting random errors.
A: Arch is using GCC 3.4.0. GCC 3.4 is much stricter when it comes to
C++ code. It will break on many more errors than GCC 3.3. You should
email the developers of the broken application, or check their
CVS/mailing list to see if they have provided patches.
Bugs
Bugs Closed This Week
997 font-config wrong fonts.conf please correct that
991 fontconfig-2.2.90-2 takes out several of my fonts
998 loaddisk is required if installing not from cdrom0
992 Upgrading KDE conflicts spamassassin
990 iputils-021109-2 fails to build
981 Clamav CVS
704 dns lookup AAAA records
898 gv build error
892 imagemagick fails on install. perl5.8
932 librsvg missing libgsf dependency
926 tcl-8.4.6 tclConfig.sh bug
958 BitchX has a wrong symlink
751 downloaderx is broken (needs rebuild against new gtk)
900 xine-lib does not compile with gcc 3.4
979 Clamav CVS
980 Clamav CVS
977 Clamav 0.72
Bugs Opened This Week
1001 unable to use kprinter in OO after update to 3.2.3
1000 idesk missing needed dependency on imlib
999 Automatic loaddisk during bootup fails if CD not in cdrom0
996 avifile will not compile
995 transcode will not compile
994 transcode unable to use xvid option
993 Add xjed to the jed package
989 Xfce4-tips - unfiled dependency
988 rox-system can't start, due to libgtop error.
987 libnss-mysql+pacman woes
986 makepkg -e doesn't validate files
985 liquidwar segfaults - allegro relink error
984 Thunderbird's PKGBUILD source entree is invalid
983 gnome depends on samba and cups
982 gnome-themes contains invalid symlinks
Closing
We're thinking about changing the format of the newsletter. Now that
Arch has an official HTML/CSS standard for documentation, it seems
appropriate to move the newsletter to that standard. We can convert the
newsletter to plain TXT for email, though it may lose some formatting.
How do you read the newsletter? If many people read it over email, we
will continue to provide email ``delivery'' along with HTML, but if most
people read it over the web, we will cut the email delivery. Please give
us your feedback. What is the most convenient format for the newsletter?
That's it for this week, stay tuned for more exciting Arch Linux news.

Dusty wrote:
sarah31 wrote:the link for the bit about jlowell bitching again doesn't work.
bah. so what?
ok, i read it on a lot of posts, and now i want to know what it means:
what do you mean with "bah"? is this a short form for something you have in canadian english or canadian français i do not know about?

Exchange rate type P is picking in contract master while ist should take M

exchange rate is maintained for M and P in OB08, we want to get the exchange rate from exchange rate type M to contract master. but it is picking from Exchange rate type P. where as echange rate 'M' maintained as a current yaer( 2011) . but exchange rate P maintained of 2010 ( previous yer). but still its a taking exchange rate type P. we want to take it From M.
Please guide us........facing this issue for so many days....
Thanks in advance....

Hello,
By default exchange rate type M will be used unless another exchange rate type for e.g. P is specified as Alternate exchange rate type. Then translation rate taged to exchange rate type P will be used.
Check "Alt. ERT" (Alternate exchange rate type) in OBBS, the suggestion is if exchange rate type M is desired then the "Alt. ERT" input should be empty on the row where exchange rate type 'M' and the corresponding currency pair for e.g. USD:GBP (assuming USD is local currency and GBP is foreign currency) is maintained.
Kind regards,
John Chin

Restoring tags & keywords in PSE 7

My wife's hard drive was full so I installed a new one and reinstalled PSE7 & and dragged all the photos back to my work. I can plug in the original hard drive on a temporary basis and would like to know what files I need to copy and replace so that all the taging and keywording can be restored. Any guidance would be appreciated.

You should take a backup of the catalog after plugging in the original hard drive. Once the backup is taken, you can restore the catalog on new hard drive. This way the tags and keywords will remain intact and they will remain attached to the images.

Working with tagged files on a folder on a mac server

Hi, we got several mac and a server with a folder share to every mac (a dropbox folder) to save bandwidth we don't use a dropbox on each computer, but dropbox in 1 Mac Server, and the dropbox folder is shared to each user.
The problems is when someone is taging a file the tag doesn't appear on each computer, and we can not find the files in each computer.
How can i force the finder to add the new tag on each mac ?

John, Thank you for your reply.
Some projects are set to cache locally while others are caching on the server, depending on the project and individual preference.

F-03 gl taging

Similar Messages

Maybe you are looking for