F-03 missing open items (Not able to run RFSEPA02)

Hi all,
One of the GL account was change to open item managed. The situation is that we still have open items which do not appear in F-03.
I checked SAP note 136754 and it asks me to run program RFSEPA02 but when I run that program it says "
"Do not use the report program to set up open item management for the
account.
Create a new account with the correct account assignment. Post your
items to the new account. If you want to use the original account
number, you must bring the account balance to zero, change the account
assignment, and repost the items. You can remove the old items by
archiving the documents"
Can anybody tell me what to do as we have hundreds of movements on accounts that are uncleared?
Is there any other program?
Thanks,
JR

Hello Ravana,
check OSS note 175960 if you still want to use the program RFSEPA02.
Best regards
Jean-Marc

Similar Messages

Open item not appearing in F-44

Hi
I want to clear one vendor employee. There are three entries in it in FBL1n.
1st entry came from TRIP (HR Travel posting) with posting date 10.05.2010
The other two entries are advance to employee.
When i am giving F-44 on 30th June2010 with OI Items tick and special GL Indicators, it does not show normal open item (entry came from TRIP), But it shows two line items for advance given to Employees
Please let me know what could be reason for the same
Thnx
Deepak

- Check some table fields in the missing documents using Transaction SE16. The following conditions must exist for the missing document numbers in question -
BSIS-XOPVW = X (Indicator: Open item management, only for G/L accounts)
BSEG-XOPVW = X (Indicator: Open item management)
BSEG-AUGBL = space (clearing document number)
BSEG-DISBN = space (discount document number)
BKPF-BSTAT = space (document status)
BKPF-XSTOV = space (indicator reversal flag)
REGUS/REGUP -> see below
Look at table REGUS using Transaction SE16. Enter the account (KONKO) in the selection screen. If you selected an entry, use the information Run date (LAUFD) and Identification (LAUFI) in Transaction F110 (payment program). Check the status of the payment run. If only the proposal was carried out, the documents proposed for payment are blocked for other clearing transactions. It is only when you delete the proposal run that the items are taken into account again in the clearing transaction.
- Check Note 136754 - F-03, F-32, F-44, F-28 missing open items (link below)
[Note 136754|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=136754]
Rgds.

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I have followed the Apple Support instructions I did it 3 times and this message always appear: "The program can't start because MSVCR80.dll is missing from your computer" and 'Error 7' but still not able to run iTunes. Anyone have a suggestion... Please!

I have followed the Apple Support instructions but these 2 errors always appear: "The program can't start because MSVCR80.dll is missing from your computer" and 'Error 7' but still not able to run iTunes. Anyone have a suggestion?

Try completely removing and reinstalling iTunes and all related components; you may need to do this multiple times. It won't normally affect the iTunes library, but that should be backed up anyway.
(99331)

Customet open item not picking

Hi,
In my customet line item showing 2 open items.But while doing FB05 its showing only one open item.
Can anybody please tell me the reason?
Regards
R.Sasikumar

Hi Sasi,
As per my knowledge that missed open item was picked at that time of APP run.
If you delete the unposted proposals.it will appear in FB05.
May be this information is useful to you
If you have any doubt feel free to ask
Regards,
Surya

TS5376 I have followed the instructions re these 2 errors "The program can't start because MSVCR80.dll is missing from your computer" but still not able to run iTunes. Anyone have a suggestion?

I have followed the Apple Support instructions re these 2 errors "The program can't start because MSVCR80.dll is missing from your computer" and 'Error 7' but still not able to run iTunes. Anyone have a suggestion?

Try completely removing and reinstalling iTunes and all related components; you may need to do this multiple times. It won't normally affect the iTunes library, but that should be backed up anyway.
(99328)

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
Rajesh

See this discussion...
https://discussions.apple.com/message/23731048#23731048

Whatsapp is opening but not able to send and receive chats on my q5

Whatapp is opening but not able to send and receive chats on my blackberry Q5

Reboot the device....
Restart: Press and hold the upper edge power button about 20-30 seconds, ignore the 3-2-1 timer and hold until the screen goes black and you see the red LED.
or
Reboot: On the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
Now, try again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Not able to run a report on BiPublisher version 10.1.3.4

I am using Bipublisher version 10.1.3.4. i am not able to run the Report. I am calling this report using
webservice from java code.I have added entry "Guest" in Guest Folder name also i have
checked the checkbox AllowGuest acess in Admin->ServerConfiguration tab.
i have xdo file in location /Guest/Test/InvoiceBatchReport/InvoiceBatchReport.xdo
I am getting exception at line following line
ReportResponse reportResp = (ReportResponse) call.invoke( new Object[] {report, "Administrator", "Administrator"} );
following is the exception detail
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: oracle.apps.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to unable to read
ReportDataFile [Guest/Test/InvoiceBatchReport/InvoiceBatchReport.xdo]
faultActor:
faultNode:
faultDetail:
{}oracle.apps.xdo.webservice.exception.OperationFailedException:null
{http://xml.apache.org/axis/}hostname:GTMDevWS
oracle.apps.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to
unable to read ReportDataFile
[Guest/Test/InvoiceBatchReport/InvoiceBatchReport.xdo]
at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
at
org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
at
org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContex
t.java:1087)
can any body provide me the solution ?

I missed to attach the source code.following is mine source code.
public static void runReport() throws Exception {
          final String bipEndpoint = "http://localhost:9706/xmlpserver/services/PublicReportService?wsdl";
          final String bipNamespace = "http://xmlns.oracle.com/oxp/service/PublicReportService";
          final String xdofile = "/Guest/Test/InvoiceBatchReport/InvoiceBatchReport.xdo";
// set up the call object
Service service = new Service();
Call call = (Call) service.createCall();
call.setTargetEndpointAddress(new URL(bipEndpoint));
// TEST Run Report
System.out.println("TESTING runReport Service BEGIN");
// register the ReportRequest class
QName reportReq = new QName(bipNamespace, "ReportRequest");
call.registerTypeMapping(ReportRequest.class, reportReq, BeanSerializerFactory.class, BeanDeserializerFactory.class);
// register the ParamNameValue class
QName nmvals = new QName(bipNamespace, "ParamNameValue");
call.registerTypeMapping(ParamNameValue.class, nmvals, BeanSerializerFactory.class, BeanDeserializerFactory.class);
// register the BIPReportResponse class
QName reportRespqn = new QName(bipNamespace, "ReportResponse");
call.registerTypeMapping(ReportResponse.class, reportRespqn, BeanSerializerFactory.class, BeanDeserializerFactory.class);
// Default return type based on what we expect
call.setOperationName( new QName(bipNamespace, "runReport" ));
call.addParameter( "ReportRequest", reportReq, ParameterMode.IN );
call.addParameter("admin", XMLType.XSD_STRING, ParameterMode.IN);
          call.addParameter("yuvraj79", XMLType.XSD_STRING, ParameterMode.IN);
call.setReturnClass(ReportResponse.class);
ParamNameValue[] paramNmVals = new ParamNameValue[2];
paramNmVals[0] = new ParamNameValue(false, "dept", null) ;
paramNmVals[1] = new ParamNameValue(false, "emp", new String[] {"*"}) ;
ReportRequest report = new ReportRequest("pdf", "en-US", "Simple",false, null, "/Guest/Test/InvoiceBatchReport/InvoiceBatchReport.xdo",null, xdofile, -1);
// issue the reques
ReportResponse reportResp = (ReportResponse) call.invoke( new Object[] {report, "Administrator", "Administrator"} );
System.out.println("Return ReportResponse: ContentType = " + reportResp.getReportContentType());
// Save the report
byte[] binaryBytes = reportResp.getReportBytes();
OutputStream out = new FileOutputStream("D:\\temp\\out.pdf");
out.write(binaryBytes);
out.close();
System.out.println("Success for Run Report");
}

I am not able to run a Windows Azure application

I have a very strange issue.
I am not able to run a windows azure application which has a WCF service and mschart in it. Following are the steps to reproduce the error:
1) Create a new windowsazureapplication with a blank asp.net webrole
2) Now add a new WCfService
3) run to check it runs ok
http://i.stack.imgur.com/1g6gW.png
4) now in one of the pages include mschart, and open the design of the page to make sure the webconfig is changed to use the mschart.
5) now try to run the project.
I am getting error message like this one:
enter image description here
Is this a problem with windows azure or am I doing somthing wrong?
FYI: This is not my first project on windows azure.
RuchitRami

As far as I know Toshiba doesnt support such Microsoft stuff so I think Microsoft is the right adres for such issues.
Have you already checked what Microsoft say about that?

ORA-06502: PL/SQL: numeric or value error : Not able to run a script

Hi All,
I want to run a script like this:
DECLARE
I_so_status_dtl     RIB_SOStatusDtl_REC;
BEGIN
I_so_status_dtl := RIB_SOStatusDtl_REC('0'     --Cust Order No
               ,'1000000014'     --Dest ID
               ,'100010222'     --Item ID
               ,1          --Order Line Number
               ,1          --Unit Quantity
               ,'R'          --Status
               ,'RMS12DEV'     --User ID
               ,'06-May-2001'     --Updated Date
End;
I am trying to run this script. Actually this script is supposed to generate an XML message, which I require. Here's the definition for the TYPE RIB_SOStatusDtl_REC:
create or replace TYPE RIB_SOStatusDtl_REC UNDER RIB_OBJECT (
     cust_order_nbr     VARCHAR2(10),
     dest_id     VARCHAR2(10),
     item_id     VARCHAR2(25),
     order_line_nbr     NUMBER(3),
     unit_qty     NUMBER(12,4),
     status     VARCHAR2(2),
     user_id     VARCHAR2(10),
updated_date DATE,
     overriding member procedure appendNodeValues( i_prefix in varchar2)
,constructor function RIB_SOStatusDtl_REC (rib_oid number, cust_order_nbr VARCHAR2, dest_id VARCHAR2, item_id VARCHAR2, order_line_nbr NUMBER, unit_qty NUMBER, status VARCHAR2) return self as result
,constructor function RIB_SOStatusDtl_REC (rib_oid number, cust_order_nbr VARCHAR2, dest_id VARCHAR2, item_id VARCHAR2, order_line_nbr NUMBER, unit_qty NUMBER, status VARCHAR2, user_id VARCHAR2) return self as result
This TYPE has a body which actually generates an XML message.
But whenever I am trying to run this, I am getting the following message:
Error report:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at line 6
06502. 00000 - "PL/SQL: numeric or value error%s"
*Cause:
*Action:
Therefore I am not able to run the following script. Here I am passing hard coded value within the TYPE, as I have run similar kind of scripts, which accepts this and creates an xml message. Can anyone help me what's the wrong with this script?
Thanks & Regards,
Debabrata

Hi,
Create one constructor same as with 8 parameters as you have constructor for only 7 and 8 9 parameters.
Regards
RK

Reg:Not able to run Std-Costing

Hi Team,
Finished product has been already run with Cost Collector & Std-Costing, but the respective BOM against said code has been changed (item has been added to BOM). After this, Standard Costing & Cost Collector is not able to run.
Can you pls suggest me.
With Regards,
P.Arunkumar.

Dear Arunkumar,
I think you are working with REM scenario.
Standard Cost estimate can be carried out only once for any material for a period.
Assuming that after taking if your BOM is getting Changed say For Eg: One more new component is
added in the BOM of a Finished Product,then in that case goto the product Cost collector of the Finished
product and click on Change mode Button (Shift + F6) and then click on The Cost button (Shift +F1) and
then save the datas.
Now while doing the confirmation in MFBF,you can see the latest BOM components getting
posted.
So no need to carryout eh cost estimate once again,so till this period that particular component will be
having only the actual value in KKF6N.So during the next period take the cost rollup and so that the
component will be having Planned as well as actual values.
Check & Revert back.
Regards
Mangalraj.S

Not able to run validation using validation.xml & validator-rules.xml

Hello Friends,
I am not able to run validation using validation.xml & validator-rules.xml.
Entire code in running prefectly but no error messages are prompted.
Following is my code:
File Name : struts-config.xml
<struts-config>

<form-beans>
<form-bean name="searchForm"
type="com.solversa.SearchForm"/>
</form-beans>

<global-forwards>
<forward name="search" path="/search.jsp"/>
</global-forwards>

<action-mappings>
<action path="/search"
type="com.solversa.SearchAction"
name="searchForm"
scope="request"
validate="true"
input="/search.jsp">
</action>
</action-mappings>

<message-resources
parameter="ApplicationResources"/>

<plug-in className="org.apache.struts.validator.ValidatorPlugIn">
<set-property property="pathnames"
value="/WEB-INF/validator-rules.xml,
/WEB-INF/validation.xml"/>
</plug-in>
</struts-config>
<br> File Name : <b> validation.xml </b>
<form-validation>
<formset>
<form name="searchForm">
<field property="name" depends="minlength">
<arg key="label.search.name" position = "0"/>
<arg1 name="minlength" key="${var:minlength}" resource="false"/>
<var>
<var-name>minlength</var-name>
<var-value>5</var-value>
</var>
</field>
<field property="ssNum" depends="mask">
<arg0 key="label.search.ssNum"/>
<var>
<var-name>mask</var-name>
<var-value>^\d{3}-\d{2}-\d{4}$</var-value>
</var>
</field>
</form>
</formset>
</form-validation>
<br> File Name : <b> SearchForm.java </b>
package com.jamesholmes.minihr;
import java.util.List;
import org.apache.struts.validator.ValidatorForm;
public class SearchForm extends ValidatorForm
private String name = null;
private String ssNum = null;
private List results = null;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
public void setResults(List results) {
this.results = results;
public List getResults() {
return results;
<br> File Name : <b> SearchAction.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public final class SearchAction extends Action
public ActionForward execute(ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception
EmployeeSearchService service = new EmployeeSearchService();
ArrayList results;
SearchForm searchForm = (SearchForm) form;
// Perform employee search based on what criteria was entered.
String name = searchForm.getName();
if (name != null && name.trim().length() > 0) {
results = service.searchByName(name);
} else {
results = service.searchBySsNum(searchForm.getSsNum().trim());
// Place search results in SearchForm for access by JSP.
searchForm.setResults(results);
// Forward control to this Action's input page.
return mapping.getInputForward();
<br> File Name : <b> EmployeeSearchService.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
public class EmployeeSearchService
/* Hard-coded sample data. Normally this would come from a real data
source such as a database. */
private static Employee[] employees =
new Employee("Bob Davidson", "123-45-6789"),
new Employee("Mary Williams", "987-65-4321"),
new Employee("Jim Smith", "111-11-1111"),
new Employee("Beverly Harris", "222-22-2222"),
new Employee("Thomas Frank", "333-33-3333"),
new Employee("Jim Davidson", "444-44-4444")
// Search for employees by name.
public ArrayList searchByName(String name) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees.getName().toUpperCase().indexOf(name.toUpperCase()) != -1) {
resultList.add(employees[i]);
return resultList;
// Search for employee by social security number.
public ArrayList searchBySsNum(String ssNum) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees[i].getSsNum().equals(ssNum)) {
resultList.add(employees[i]);
return resultList;
<br> File Name : <b> Employee.java </b>
package com.solversa;
public class Employee
     private String name;
     private String ssNum;
     public Employee(String name, String ssNum) {
     this.name = name;
     this.ssNum = ssNum;
     public void setName(String name) {
     this.name = name;
     public String getName() {
     return name;
     public void setSsNum(String ssNum) {
     this.ssNum = ssNum;
     public String getSsNum() {
     return ssNum;
Pls help me out.
Not able to prompt errors.

Hello Friends,
I am not able to run validation using
validation.xml & validator-rules.xml.
Entire code in running prefectly but no error
messages are prompted.
Following is my code:
File Name : struts-config.xml
<struts-config>

<form-beans>
<form-bean name="searchForm"
type="com.solversa.SearchForm"/>
ans>

<global-forwards>
<forward name="search" path="/search.jsp"/>
global-forwards>

<action-mappings>
<action path="/search"
type="com.solversa.SearchAction"
name="searchForm"
scope="request"
validate="true"
input="/search.jsp">
tion>
</action-mappings>

<message-resources
parameter="ApplicationResources"/>

<plug-in
className="org.apache.struts.validator.ValidatorPlugI
">
<set-property property="pathnames"
value="/WEB-INF/validator-rules.xml,
/WEB-INF/validation.xml"/>
>
</struts-config>
<br> File Name : <b> validation.xml </b>
<form-validation>
<formset>
<form name="searchForm">
<field property="name" depends="minlength">
<arg key="label.search.name" position = "0"/>
<arg1 name="minlength" key="${var:minlength}"
resource="false"/>
<var>
<var-name>minlength</var-name>
<var-value>5</var-value>
</var>
</field>
<field property="ssNum" depends="mask">
<arg0 key="label.search.ssNum"/>
<var>
<var-name>mask</var-name>
<var-value>^\d{3}-\d{2}-\d{4}$</var-value>
</var>
</field>
/form>
</formset>
form-validation>
<br> File Name : <b> SearchForm.java </b>
package com.jamesholmes.minihr;
import java.util.List;
import org.apache.struts.validator.ValidatorForm;
public class SearchForm extends ValidatorForm
private String name = null;
private String ssNum = null;
private List results = null;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
public void setResults(List results) {
this.results = results;
public List getResults() {
return results;
<br> File Name : <b> SearchAction.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public final class SearchAction extends Action
public ActionForward execute(ActionMapping
mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception
EmployeeSearchService service = new
EmployeeSearchService();
ArrayList results;
SearchForm searchForm = (SearchForm) form;
// Perform employee search based on what criteria
was entered.
String name = searchForm.getName();
if (name != null && name.trim().length() > 0) {
results = service.searchByName(name);
else {
results =
service.searchBySsNum(searchForm.getSsNum().trim());
// Place search results in SearchForm for access
by JSP.
searchForm.setResults(results);
// Forward control to this Action's input page.
return mapping.getInputForward();
<br> File Name : <b> EmployeeSearchService.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
public class EmployeeSearchService
/* Hard-coded sample data. Normally this would come
from a real data
source such as a database. */
ivate static Employee[] employees =
new Employee("Bob Davidson", "123-45-6789"),
new Employee("Mary Williams", "987-65-4321"),
new Employee("Jim Smith", "111-11-1111"),
new Employee("Beverly Harris", "222-22-2222"),
new Employee("Thomas Frank", "333-33-3333"),
new Employee("Jim Davidson", "444-44-4444")
// Search for employees by name.
public ArrayList searchByName(String name) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if
(employees.getName().toUpperCase().indexOf(name.toU
pperCase()) != -1) {
resultList.add(employees[i]);
return resultList;
// Search for employee by social security number.
public ArrayList searchBySsNum(String ssNum) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees[i].getSsNum().equals(ssNum)) {
resultList.add(employees[i]);
return resultList;
<br> File Name : <b> Employee.java </b>
package com.solversa;
public class Employee
     private String name;
     private String ssNum;
     public Employee(String name, String ssNum) {
     this.name = name;
     this.ssNum = ssNum;
     public void setName(String name) {
     this.name = name;
     public String getName() {
     return name;
     public void setSsNum(String ssNum) {
     this.ssNum = ssNum;
     public String getSsNum() {
     return ssNum;
Pls help me out.
Not able to prompt errors.
Hi,
Your error message are not displaying because u does not made Message-Resoucrce property file (Resource Bundle) when you make it .
give it entry in
struts-config.xml
<message-resources parameter="ApplicationResources" />
and
define key and corresponding error message to key in this ApplicationResources i.e
#Error Resources
label.search.ssNum=Plz Enter correct ssNum

Not able to run python programs on OSx maverics

I bought Mac book pro 1.5 yrs back, and it came with OSx 10.6 now few months back I upgraded to OSx maverics and since then I am not able to run python tools properly. Just importing something in the python commandline i get segmentation fault 11.
now I just tried
import os
and i got segmentation fault with below error,
Process:
Python [1230]
Path:
/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/ MacOS/Python
Identifier:
Python
Version:
2.7.4 (2.7.4)
Code Type:
X86-64 (Native)
Parent Process: bash [883]
Responsible:
Terminal [749]
User ID:
501
Date/Time:
2015-01-15 09:46:08.784 +0530
OS Version:
Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: A975CB81-1635-0611-4AD9-0DC61C4EC9A0
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
VM Regions Near 0:
-->
__TEXT
0000000100000000-0000000100001000 [
4K] r-x/rwx SM=COW /Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents /MacOS/Python
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   readline.so
0x00000001002f2f97 call_readline + 647
1   org.python.python
0x0000000100008e92 PyOS_Readline + 274
2   org.python.python
0x000000010000a6e8 tok_nextc + 104
3   org.python.python
0x000000010000ae93 PyTokenizer_Get + 147
4   org.python.python
0x0000000100005a8a parsetok + 218
5   org.python.python
0x00000001000e8af2 PyParser_ASTFromFile + 146
6   org.python.python
0x00000001000e9dd3 PyRun_InteractiveOneFlags + 243
7   org.python.python
0x00000001000ea0be PyRun_InteractiveLoopFlags + 78
8   org.python.python
0x00000001000ea8d1 PyRun_AnyFileExFlags + 161
9   org.python.python
0x000000010010155d Py_Main + 3101
10 org.python.python
0x0000000100000f14 0x100000000 + 3860
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000100322290 rcx: 0x0000000102000000 rdx: 0x0000000000000a00
rdi: 0x0000000000000000 rsi: 0x00000001002f3254 rbp: 0x00007fff5fbff2d0 rsp: 0x00007fff5fbff200
   r8: 0x0000000102000000   r9: 0x0000000000000000 r10: 0x0080002140000003 r11: 0x0000000000000001
r12: 0x0000000000000001 r13: 0x0000000000000009 r14: 0x00007fff5fbff290 r15: 0x00007fff5fbff210
rip: 0x00000001002f2f97 rfl: 0x0000000000010206 cr2: 0x0000000000000000
Logical CPU:
1
Error Code:
0x00000004
Trap Number:
14
Binary Images:
0x100000000 -
0x100000fff +org.python.python (2.7.4 - 2.7.4) <A450FF23-FAE2-B1D7-E70F-5511C3FAD379> /Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents /MacOS/Python
0x100003000 -
0x10016fff7 +org.python.python (2.7.4, [c] 2004-2013 Python Software Foundation. - 2.7.4) <D4B4F67F-D7AA-AECF-2E7C-6C605A9B1EA9> /Library/Frameworks/Python.framework/Versions/2.7/Python
0x1002f1000 -
0x1002f3fff +readline.so (???) <CDBF1919-7992-8A7E-5F30-D429DB67EF51> /Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-dynload/rea dline.so
0x100700000 -
0x10071effb libedit.2.dylib (39) <1B0596DB-F336-32E7-BB9F-51BF70DB5305> /usr/lib/libedit.2.dylib
0x10072f000 -
0x100783fe7 +libncursesw.5.dylib (5) <3F0079C0-01C1-3CB8-19CA-F9B49AA4F4A4> /Library/Frameworks/Python.framework/Versions/2.7/lib/libncursesw.5.dylib
0x7fff64d5d000 -
0x7fff64d90817 dyld (239.4) <2B17750C-ED1B-3060-B64E-21897D08B28B> /usr/lib/dyld
0x7fff88329000 -
0x7fff8833aff7 libsystem_asl.dylib (217.1.4) <655FB343-52CF-3E2F-B14D-BEBF5AAEF94D> /usr/lib/system/libsystem_asl.dylib
0x7fff8833b000 -
0x7fff88340ff7 libunwind.dylib (35.3) <78DCC358-2FC1-302E-B395-0155B47CB547> /usr/lib/system/libunwind.dylib
0x7fff88b16000 -
0x7fff88b3dff7 libsystem_network.dylib (241.3) <8B1E1F1D-A5CC-3BAE-8B1E-ABC84337A364> /usr/lib/system/libsystem_network.dylib
0x7fff88b3e000 -
0x7fff88b5aff7 libsystem_kernel.dylib (2422.90.20) <20E00C54-9222-359F-BD98-CB79ABED769A> /usr/lib/system/libsystem_kernel.dylib
0x7fff88de4000 -
0x7fff88e14fff libncurses.5.4.dylib (42) <BF763D62-9149-37CB-B1D2-F66A2510E6DD> /usr/lib/libncurses.5.4.dylib
0x7fff88e15000 -
0x7fff88e1bff7 libsystem_platform.dylib (24.90.1) <3C3D3DA8-32B9-3243-98EC-D89B9A1670B3> /usr/lib/system/libsystem_platform.dylib
0x7fff88e8c000 -
0x7fff88ea7ff7 libsystem_malloc.dylib (23.10.1) <A695B4E4-38E9-332E-A772-29D31E3F1385> /usr/lib/system/libsystem_malloc.dylib
0x7fff891a9000 -
0x7fff891f7fff libcorecrypto.dylib (161.1) <F3973C28-14B6-3006-BB2B-00DD7F09ABC7> /usr/lib/system/libcorecrypto.dylib
0x7fff892a2000 -
0x7fff892acfff libcommonCrypto.dylib (60049) <8C4F0CA0-389C-3EDC-B155-E62DD2187E1D> /usr/lib/system/libcommonCrypto.dylib
0x7fff892c0000 -
0x7fff89312fff libc++.1.dylib (120) <4F68DFC5-2077-39A8-A449-CAC5FDEE7BDE> /usr/lib/libc++.1.dylib
0x7fff8a0de000 -
0x7fff8a105ffb libsystem_info.dylib (449.1.3) <7D41A156-D285-3849-A2C3-C04ADE797D98> /usr/lib/system/libsystem_info.dylib
0x7fff8b079000 -
0x7fff8b080fff libcompiler_rt.dylib (35) <4CD916B2-1B17-362A-B403-EF24A1DAC141> /usr/lib/system/libcompiler_rt.dylib
0x7fff8b081000 -
0x7fff8b082ffb libremovefile.dylib (33) <3543F917-928E-3DB2-A2F4-7AB73B4970EF> /usr/lib/system/libremovefile.dylib
0x7fff8b083000 -
0x7fff8b23bff3 libicucore.A.dylib (511.31) <167DDD0A-A935-31AF-B5B9-940268EC3A3C> /usr/lib/libicucore.A.dylib
0x7fff8bb00000 -
0x7fff8bb2ffd2 libsystem_m.dylib (3047.16) <B7F0E2E4-2777-33FC-A787-D6430B630D54> /usr/lib/system/libsystem_m.dylib
0x7fff8c3a5000 -
0x7fff8c3a6ff7 libsystem_blocks.dylib (63) <FB856CD1-2AEA-3907-8E9B-1E54B6827F82> /usr/lib/system/libsystem_blocks.dylib
0x7fff8cd63000 -
0x7fff8cd65ff7 libquarantine.dylib (71) <7A1A2BCB-C03D-3A25-BFA4-3E569B2D2C38> /usr/lib/system/libquarantine.dylib
0x7fff8d8fa000 -
0x7fff8d923ff7 libc++abi.dylib (49.1) <21A807D3-6732-3455-B77F-743E9F916DF0> /usr/lib/libc++abi.dylib
0x7fff8dbcc000 -
0x7fff8dbd3ff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
0x7fff8dbfb000 -
0x7fff8dbffff7 libcache.dylib (62) <BDC1E65B-72A1-3DA3-A57C-B23159CAAD0B> /usr/lib/system/libcache.dylib
0x7fff8ddf9000 -
0x7fff8de00ff8 liblaunch.dylib (842.90.1) <38D1AB2C-A476-385F-8EA8-7AB604CA1F89> /usr/lib/system/liblaunch.dylib
0x7fff8de01000 -
0x7fff8de43ff7 libauto.dylib (185.5) <F45C36E8-B606-3886-B5B1-B6745E757CA8> /usr/lib/libauto.dylib
0x7fff8de4d000 -
0x7fff8de51ff7 libsystem_stats.dylib (93.90.3) <1A55AF8A-B6C4-3163-B557-3AD25DA643A8> /usr/lib/system/libsystem_stats.dylib
0x7fff8ecd8000 -
0x7fff8eebdfff com.apple.CoreFoundation (6.9 - 855.14) <617B8A7B-FAB2-3271-A09B-C542E351C532> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff90c81000 -
0x7fff90c89fff libsystem_dnssd.dylib (522.90.2) <A0B7CF19-D9F2-33D4-8107-A62184C9066E> /usr/lib/system/libsystem_dnssd.dylib
0x7fff90c8b000 -
0x7fff90c8cff7 libDiagnosticMessagesClient.dylib (100) <4CDB0F7B-C0AF-3424-BC39-495696F0DB1E> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff91b4f000 -
0x7fff91b54fff libmacho.dylib (845) <1D2910DF-C036-3A82-A3FD-44FF73B5FF9B> /usr/lib/system/libmacho.dylib
0x7fff91c4e000 -
0x7fff91c55ff3 libcopyfile.dylib (103) <5A881779-D0D6-3029-B371-E3021C2DDA5E> /usr/lib/system/libcopyfile.dylib
0x7fff91d91000 -
0x7fff91e1aff7 libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
0x7fff91e6e000 -
0x7fff91e77ff3 libsystem_notify.dylib (121) <52571EC3-6894-37E4-946E-064B021ED44E> /usr/lib/system/libsystem_notify.dylib
0x7fff9272c000 -
0x7fff9272dff7 libsystem_sandbox.dylib (278.11) <5E5A6E09-33A9-391A-AB34-E57D93BB1551> /usr/lib/system/libsystem_sandbox.dylib
0x7fff92ede000 -
0x7fff92f02fff libxpc.dylib (300.90.2) <AB40CD57-F454-3FD4-B415-63B3C0D5C624> /usr/lib/system/libxpc.dylib
0x7fff93601000 -
0x7fff93602ff7 libSystem.B.dylib (1197.1.1) <BFC0DC97-46C6-3BE0-9983-54A98734897A> /usr/lib/libSystem.B.dylib
0x7fff9363c000 -
0x7fff937e9f27 libobjc.A.dylib (551.1) <AD7FD984-271E-30F4-A361-6B20319EC73B> /usr/lib/libobjc.A.dylib
0x7fff93b8e000 -
0x7fff93b8eff7 libkeymgr.dylib (28) <3AA8D85D-CF00-3BD3-A5A0-E28E1A32A6D8> /usr/lib/system/libkeymgr.dylib
0x7fff949e8000 -
0x7fff949ebff7 libdyld.dylib (239.4) <CF03004F-58E4-3BB6-B3FD-BE4E05F128A0> /usr/lib/system/libdyld.dylib
0x7fff94df0000 -
0x7fff94df2ff3 libsystem_configuration.dylib (596.13) <B51C8C22-C455-36AC-952D-A319B6545884> /usr/lib/system/libsystem_configuration.dylib
0x7fff95357000 -
0x7fff95358fff libunc.dylib (28) <62682455-1862-36FE-8A04-7A6B91256438> /usr/lib/system/libunc.dylib
0x7fff95380000 -
0x7fff95391ff7 libz.1.dylib (53) <42E0C8C6-CA38-3CA4-8619-D24ED5DD492E> /usr/lib/libz.1.dylib
0x7fff95392000 -
0x7fff953acfff libdispatch.dylib (339.90.1) <F3CBFE1B-FCE8-3F33-A53D-9092AB382DBB> /usr/lib/system/libdispatch.dylib
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 1192
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=76.9M resident=147.6M(192%) swapped_out_or_unallocated=16777216.0T(22877170565120%)
Writable regions: Total=46.0M written=2644K(6%) resident=3112K(7%) swapped_out=0K(0%) unallocated=42.9M(93%)
REGION TYPE
VIRTUAL
===========
=======
Kernel Alloc Once
4K
MALLOC
37.6M
MALLOC (admin)
16K
STACK GUARD
56.0M
Stack
8192K
VM_ALLOCATE
8K
__DATA
1432K
__LINKEDIT
66.2M
__TEXT
10.7M
__UNICODE
544K
shared memory
4K
===========
=======
TOTAL
180.5M
Model: MacBookPro9,2, BootROM MBP91.00D3.B06, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: Android
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1
I would really appreciate if some one can help solve the above issue.

That is always a classpath issue. Fix your classpath so it uses the J2ee.jar. If you are using an IDE you will have to look up how to add JARs to the IDE's classpath, which is usually not the same as the system classpath.

Not able to run the Jdeveloper Pages in Local Machine

Dear All,
I am developing Custom OAF Pages in R12. while am not able to run the page in Local Machine Currently i am using Remote VPN. same page i import into server am able to run in Application.
The error says:
1, Increae the time limit bye setting the JRAD.RUNREG.TIMEOUT Parameter in ide.parameters file loacted in System directory.
I found the file . am not able to find the JRAD.RUNREG.TIMEOUT Parameter option
2, Check the Host Name in the Preferances, Under Embeded OC4J.
I Verified same and using the Default Local IP Address.
I am using Jdeveloper Version : p8431482_R12_GENERIC.zip
Please help me. I approciate before
Thanks
Venkat Reddy Pulichintha
00971502644919
[email protected]

Dear Gaurav,
Thanks for you quick replay
For this Patch number (p8431482_R12_GENERIC.zip), there is no (JAVA Options: remove this statement: -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true)
Please guide me furthe steps. any other settings requird.
Thanks
Venkat Reddy Pulichintha
00971502644919
[email protected]

F-03 missing open items (Not able to run RFSEPA02)

Similar Messages

Maybe you are looking for