F.05 and valuation account issue

Hello,
I have a crazy question about the Payment document posting. Here is the scenario:
There is an Invoice cretaed through MIRO in USD. The company code is in CAD.
So there are postings against the GR/IR accounts.
If I do Payment runF110, the total exchange gain/loss is posting to the corresponding account based on the currency ex. rate
If the users does F.05 (GR/IR Valuation option checked) at the period end and then if the user runs F110 following month, the payment document shows credit of valuation account postings and debit to the ex change gain/loss account. Why is it showing the valuation account postings here? What should we do with these postings?
Can some one explain me the business process of the whole F.05 and F110 postings please?
Thanks In Advance.

Hi Venkat,
Was the entry generated via F.05 reversed the next period/date?
Nadini

Similar Messages

Open Item Management and parallel accounting issue

We are using parallel accounting, there are two ledgers setup.
With this setup, posing to leading ledger will automatically post an entries to non-leading ledger.
Our user have this requirement, that for adjustment purpose, they just want to post to one ledger (by specifying the leadger group).
but we encounter a problem, when GL account setup with 'Open Item Management' , FBB1 dont allow to post it directly when we enter the ledger group.
Can the expert advise, it is with parallel accounting, account with 'Open Item Management' have to post to all ledgers.
Thank you.

Yes, this is a precondition , if a particular posting needs to be made to non -leading leadger , then accounts should be managed as not open items .
In case if the accounts is managed as open items then posting happens to all the ledgers.
Thanks
Regards,
Manish Garg

Issues with Mail and SMTP and Gmail Accounts

So this isn't a question....more like a solution that I had to figure out.
We have multiple gmail accounts in our family and after upgrading to OSC Yosemite our gmail accounts wen't haywire. My wife was sending emails that eventually were sent from my gmail account (mass neighborhood emails at that.....and all replies came to me instead of her). I spent about 2 hours investigating and put together several different threads that finally fixed out problem. The root of the issue is that you can share the same Incoming Mail Server for all of your gmail accounts and your mail will go to the accounts that it is supposed to go to, but you have to have individual Outgoing Mail Servers for each of your accounts otherwise all outgoing mail will come from one account only. I don't know why this happened, it is a pain in the butt, but here's how I fixed it with 3 gmail accounts running through 1 mac.
1st - you need to remove all of your gmail accounts from mail via Internet Accounts in Settings. Just highlight the account and hit the minus sign at the bottom. You won't lose anything if you have your gmail settings set to default which backs everything up to Google's servers....it will all load back to you mac and it will all be available online at gmail.com
2nd - you need to add back all of your accounts one at a time (and follow all of the following steps for each account before adding another). Select the plus sign and choose Google (for gmail accounts only).
3rd - Give your gmail account a recognizable name in the "Name" field (if you have multiple Gmail accounts to add, you will want to distinguish between them).
4th - type in your username ([email protected]) and password. Make sure to add the suffix @gmail.com.
5th - Check the boxes that you want to add to your mac (mail, contacts, calendars, messages, notes).
6th - Click the "Details" button to ensure that you have an adequate description (see # 3 above) if you are going to have multiple gmail accounts to add.
7th - Open the Mail app.
8th - From Mail Preferences/Account Information Tab - make sure that you account is Enabled (check box next to "Enable Account", make sure that you have an adequate description name, email address is correct, Incoming mail server is imap.gmail.com, Username is your normal gmail login username (absent any suffix like .gmail.com), password is your gmail password.
9th - Then, from Preferences click on the Advanced tab and....Uncheck "Automatically detect and maintain account settings".
10th - Then, go back to Account Information Tab and.....from the Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP List....
11th - You need to create an individual SMTP Server Account for each gmail account that you plan to add.
12th - To do this click the plus button. Server Name should always be smtp.gmail.com. Type in your own Description (I recommend naming it after the gmail account that you plan to attach it to).
13th - TLS Certificate should be "None"
14th - Click the Advanced Tab - From here, uncheck the box for "Automatically detect and maintain account settings". Then make sure Port is 587 (default is 25 for some ungodly reason). Check the box for "Use SSL".
15th - Set authentication to "Password". User name MUST contain a suffice (i.e [email protected]). Password is your normal gmail password.
16th - Click OK.
17th - Now your back at Preferences/Account Information - Link your account to the SMTP server that you just created by using the dropdown box next to Outgoing Mail Server (SMTP).
18th - Save all changes and close out of Mail App.
19th - Restart Mail and recheck steps 8-15....for some reason my passwords kept getting erased, but they eventually saved and took.
20th - Add another gmail account by following these steps and then recheck all along the way for passwords, suffixes, everything. You will want to make sure that your accounts are all properly linked to their respective Outgoing Mail Servers (hence the distinct naming descriptions).
21st - Once you have added multiple accounts send email between them to make sure that they are being sent from and received to the correct accounts.

Wow! Oh my goodness Patrick, thank you so much man. That's a ton of informatiion to take the time to write out step by step and share with strangers. I really, really am grateful to you. I've been dealing with this for a month, half the month I kept changing my passwords and kept assuming I was making some mistake. It used to work fine. About a week ago I started looking for a solution and couldn't find one that worked.
You have changed that sir! I'm good to go, stress level will lower when I am on my Mac, and I'm so glad to not have all these messages popping back up that I was done with!
Muchos Gracias Amigo! Owe you one...

Address Book Server and iOS Default Account Issue

I have a really strange issue with a Lion Server. 10.7.5
There are several user accounts on the machine some are local, some are OD accounts. For the most part they work just fine.
Mail and Calendar accounts seem to be ok and indeed when you set up the Address book account this also work and syncs in both directions.
Here is the odd issue: For certain accounts, iOS devices do not seem to register them to be available to set as default. The device can use them properly, they do sync fine, if you hit 'import SIM contacts' they will show up as options to choose as the destination account, but if you have iCloud and another contact account set up, they do not show up as options to be chosen as the default contacts account. If they are the only contact accounts, then the 'Set Default Account' option does not even appear in the Mail, Contacts, Calendars settings under Contacts. It appears fine under Calendars and Mail.
When I installed more than one of the 'faulty' accounts on a single iOS device, then deactivated all but one, the Default Account option reappeared (there was also an iCloud account present), but it soon disappears on its own.
Has anyone seen this before?
I'm at a bit of a loss.

You should see a "CardDAV" option in the AccountType popup in AddressBook.app. That is what you need to select to use AddressBook Server on OS X 10.6.

Account determination - exchange rate and valuation

Hello All,
we have a problem concerning our account determination for differences in exchange rate and valuation. When clearing open vendor items in foreign currency, a percentage of the difference goes to our exchange rate difference account (correct), but the other part of our difference goes to the account we have configured for valuation (incorrect).
Before, we had, in "Account Determination for OI Exch.rate differences" (transaction FBKP) , the following configuration for all our accounts in foreign currency:
Exchange rate difference realized:
Loss: 66800000
Gain: 76800000
Valuation
Val Loss: 66800100
Val Gain: 13600000
Bal sheet adj: 40099999
Now, we have the same accounts,except for "Bal sheet adj", for which we have 5 different accounts depending on the account to be valued. This change shouldn't have any effect, but since then, every time we clear an open item (KR and KZ), one part of the difference goes to an exchange rate difference account, while another part goes to valuation, when this last account should only be used when running F.05.
Any help?
thanks
Daniel

Asha,
Revaluation is a 2 step process - In the first step, the documents entered in FC are converted into LC and then in the second step all the LC is converted into GC using the GAAP/Quarterly Rate.
During the first step, the difference is posted to a P/L Account and during the second step, the difference is posted to a B/S Account.
Coming to the open item clearing getting posted to the same accont defined in the step 1 - I would ask how are you doing the open item clearing ?
If it's manual through F-44, then i would say the accounts you are mentioning during clearing are wrong.
If it's through Payment Run, You would have to go FBZP -> Bank Selection and then check the g/l accounts mentioned over there.
Hope it helps..
Thanks,
Nandita

Ive gotten 3 responses from you guys. But still no help. Can't believe it's taken this long for apple to respond to this issue and I'm very disappointed that all I did was take precaution from left to my account info and my account has been disabled since

Ive gotten 3 responses from you guys. But still no help. Can't believe it's taken this long for apple to respond to this issue and I'm very disappointed that all I did was take precaution from left to my account info and my account has been disabled since. Sad that we can't do any updates to equipment I've spent so much money in. Hope this is resolved real soon.

Who exactly are you addressing this post to? And what exactly are you posting? We are just users like you, and have no idea what you are referring to. If there is something you would like to ask - user to user - please do so. Otherwise, you are wasting your time complaining about Apple, since we are not Apple.
GB

How do we change itune and icloud accounts? My wife and I have seperate accounts but she cannot access hes, only mine. This causes many issues like facetime, text etc. Do we have to reset her devices and start fresh?

How do we change itune and icloud accounts? My wife and I have separate accounts but she cannot access hes, only mine. This causes many issues like face time, text etc. Do we have to reset her devices and start fresh?

I think this may be the answer.
http://support.apple.com/kb/HT5621

HT201232 Support Subject : iTunes Cards and Codes Sub Issue : hi i want to change my iTunes account from US Store to Kuwait Store and i want to reset My balance.

Support Subject : iTunes Cards and Codes
Sub Issue : hi i want to change my iTunes account from US Store to Kuwait Store and i want to reset My balance.

Try contacting iTunes Support (these are user-to-user forums) and ask them if they can remove the balance from your account so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Issues with multiple apple IDs and iTunes accounts

I work in an office that is all mac based and have mac computers at home. I have an apple ID and iTunes account for personal use where I purchase books and music and I have an office apple ID and iTunes account to share calendars with colleagues using iCloud and purchase work related apps like upgrades to operating systems, etc.
I have an iPhone that is set up with my personal apple ID so that my music is on my phone and so that the photo streaming is attached to personal photos, etc. Is there a way to sync my personal contacts with my contacts that are registered with my professional apple ID? Ideally, I would like to have my iOS devices syncing my calendar and contacts with my work apple ID and my music and photos with my personal ID. Is there any hope or am I stuck?
Thanks for any help anyone might have...

Welcome to the Apple community.
So far as contacts and calendars go, you can share your works data and your personal data with your iOS device by entering the second account as a secondary account in settings > mail, contacts and calendars.
You should also be aware that your iCloud and iTunes accounts and different accounts, you do not have to use the same ID for both.

Change account username and home folder issue

Hello guys,
Apple store re-installed Yosemite v10.10 on my MBA early 2014 (128gb, 4gb)
I wanted to change the account username and the home folder name after installation however I think I did it the wrong way to start with
Step1
I went into System Preference > User Groups, unlocked padlock, ctrl+click on the admin account > advanced options and replaced account name and home folder name with new name (e.g. my computer). Both match.
Relocked padlock, quit system preferences. Rebooted.
Step2
Then I realised that what I did, so I have did it all again after reading Change your OS X account name and home directory name - Apple Support
Could you please tell me whether step1 and step2 might have corrupted the operating system (e.g. legacy preferences, etc, etc)? How can I check that?
Thank you for your support.

Eric, thank you.
Actually Keychain access app has been malfuncitoning since Yosemite was installed and username and home folders were renamed.
Sintomps
the following services and apps keeps asking to use "Login" keychain
- Messages
- Calendar Agent
- Safari
- ScopedBookmarkAgent
- accountds
- com.apple.helper
I always lock keychain. Keychain is sync with admin account password. Keychain verified and repaired. No problems found
I have followed this tutorial with no good result
OS X Mavericks v10.9.1: Repeated prompts to unlock "Local Items" keychain PS: the alpha numeric folder in ~/Library/Keychains/ starts with letter b not letter A as suggested in the tutorial
Resetting your keychain in Mac OS X
OS X: Keychain Access asks for keychain "login" after changing login password
What are you thoughts? Thank you for your support.

MB5L Report Discrepacy for Material and Stock Account Currency

I have found in the MB Report Discrepancy for Material and Stock Account Currency. Why is this happening? Why is there a variance between total price in materials and stock account? Anyone please help me. I'm abaper but now been pushed to do logistic. I need help for this issue.

Hi,
Here's some information from help. Variances can occur for the following reasons:
You have entered postings to the stock account manually.
The stock account includes not only stock postings, but also other postings. In this case, you should check the account determination in the Customizing for Valuation and Account Assignment. Make sure that the stock accounts are used solely for the transaction key BSX (stock postings).
Check Account Determination - OMWB
The account assignment for the stock accounts (transaction key BSX) was changed during productive operation; the respective stocks, however, were not deducted from the old account (movement type 562) and posted to the new one (movement type 561).
Cheers !

Cost Center and GL account in Sales Order / Delivery

I have a requirement where we want user to specify what cost center and GL account should be used while posting goods issue.
Currently GL account and Cost Center is automatically determined based on OBYC configuration.
Is there a way user can populate Cost center and GL account at Sales order or Delivery document level and what ever they have specified will be used for Posting Goods Issue.
If user doesnt specify anything then standard OBYC determination should take place.
I looked at OVF3 transaction which can default cost center (though no GL account) but its not useful in our requirement.
I also looked at OKB9 transaction but not sure if we can use it either.
Again we want user to enter Cost center and GL account at either SO or Delivery document level and then that should be used for Post goods issue.
Thanks in advance.

Hi,
In delivery under tab GOODS MOVEMENT DATA
After valuation type column COST CENTER & G/L Account column available
Now with the help of FI consultant make it change mode so user can maintain also I observe that if delivery created without reference to order then that fields are in change mode means user cn maintain data for this but if with reference to order it is disable mode
Check in t-code OMJJ FIELD SELECTION FOR MOVEMENT TYPE
Put movement 601
Then select movement type and double click on filed selection (from 201)
Then go to additional account assignment and for cost centre make it optional or requirement
or Else under field selection enjoy for movement type 602 indsert field KONT0 and KOSTL and check
If this can not work there is option field selection for G/L account check that with FI
Kapil

Account groups and Recon Account

Dear Experts,
I use SAP R/3 4.6 C.
I've type account : Thirds Party , Affiliates and Subsidiary, and each account have Recon. Account : Thirds Party Recon Account , Affiliates Recon. Account and Subsidiary Recon Account.
I need information about Customer : Account Assignment Groups (OVK8) and Recon. account (XD03).
Are there any connection between above t-code in SD and FI ?
Thanks,
Iwan Siahaan

Hi Expert,
We need to create the Reconciliation Accounts for Customers, according to the Customer Account Groups.
If Customer is Created with the following Account Groups - Thirds Party , Affiliates and Subsidiary then we need to Create the Reconciliation Accounts - Sundry Debtors - Thirds Party Account, Sundry Debtors - Affiliates Account and Sundry Debtors - Subsidiary Account.
FI and SD Integration is done in T-Code: VKOA and in T-Code: OB40(Taxes Account Determination)
T-Code: OVK8 is just for creation of Account Assignment Groups for Customers.
Account Determination at the time of Post Goods Issue - T-Code: OBYC - GBB (Transaction) - VAX - Valuation Class (Finished Product) - COGS Account - No Cost Element (If there is no production Activity)
Regards,
GK
SAP
Edited by: GopiKrishna.Y on Feb 3, 2012 4:28 AM

Total Qty and Valuation is "0" for Items w/out Movement for the Prev Period

Hi MM Experts,
We encounter error message "Valuated stock becomes negative"when we try to post a goods issuance against a production order with posting date Jan 31, 2011 (our current period is Feb 2011). I checked the materials' stocks and there are enough stock for the issuance. I checked the material valuation in the material master and I found out that the Total Stock Qty and Total Stock Valuation for period 01 2011 is both "0". The Total Stock Qty and Valuation for periods Dec 2010 and Feb 2011 however have the same value. I also checked the stock movements from December to Feb and I found out that there were no movements for January (which means the quantity and value should be the same as end of Dec). I tried simulating the posting of goods issuance using Feb as the posting date and the system did not issue any error message.
Have anyone encountered the same issue? Is this standard to the system? We need to post the issuance using posting date Jan 31 and we would really appreciate any inputs/ help.
Thanks and regards,
She

Hi Raj,
We have made the balance as Zero Now.
The point here earlier ie when the Account was not having Open item status, system has calculated Foreign currency valuation based on currency and not on Line Item.
Where as now it is calculating based on line item(which is Open item).
The point is expectation is system to calcuatate forex valuation for future items ie items posted after Open item activation , where as currenty When the account is Zero system is calculating Forex difference.
regards
N.Kumar

Link between Material group and GL account

Hi Friends ,
Need your help in the following issue
Where is the link between Material group and GL account. i.e. If material group is selected in PO then the GL account for the material should get picked up automatically in PO (for account assigned POs) ?
What I know is
1. In Account assignment category configuration we need to assign the value "VBR" in Account Modification field.
2. In Material group configuration we need to assign the vluation class for material group
3. In Account determination(OBYC) for GBB transcation type for the combination of general modifier "VBR" & Valuation class we need to assign the GL account .
When PO is created with respective account assignment category the GL account is picked from the above setting.
My question is , "Is there any other setting apart from the above which will decide the GL account in PO fro account assigned POs"?
Thanks
Deva

Hi,
From IMG> Material Management> Purchasing> Material Master> Entry Aids for Items Without a Material Master,
With it you can define the G/L account assignment according to the relationship between material group and valuation class, from my point of view, you had better define some valuation class for non-produciton parts in advance.
Good luck
Tao

F.05 and valuation account issue

Similar Messages

Maybe you are looking for