F.08 (S_ALR_87012277), program (RFSSLD00 ), screen errors after upgrade

Hi,
We upgraded a system from 4.6C to ECC 6.0, and we have a problem in G/L account balance report.
In the period field, fields are not seen with their default values when the report is run, and additionally when we write a period to the field, an error occurs and the message is: " Invalid field format (screen error) "..
An additional error is about the field descriptions. Some of the field descriptions are not seen in the screen, for example, normally in report F.08 in 6.0, the last check box field's description is: "Totals of all company codes", but there is nothing for that field in the upgraded system.
Is there common thing for the reports? or how can I make this report run?
Thank you,
Gul.

Hello,
I have solved the problem by regenerating the programs from SE38..
Thanks.

Similar Messages

  • Satellite L675D: Blue Screen error after upgrading to Windows 8

    Hello,
    I've recently upgraded my Toshiba laptop to Windows 8 and every time I use it, after 5-10 minutes, I get a blue screen page of error and the laptop restarts.
    The problem is really annoying.
    I've discovered that if I don't plug in the battery charger, the laptop works normally, but I'd like to solve the problem properly.
    What should I do?

    > I've installed Windows 8 Pro with a regular activation key: I had Windows 7 before and I simply updated it to Windows 8. >I don't know about the drivers.. I think that may be the problem, but I also reckon the drivers are ok! Do you know a good way to check it out? Or where I can find the proper drivers?
    Windows 8 drivers for Satellite L675D dont exist on Toshiba EU driver page. The L675D series does not support Windows 8.
    However, even if the drivers are not available and Windows 8 is not supported, it should not be a big problem to run this system on the Satellite L675D.
    You said that you simply updated the Win 7 to Win 8.
    Maybe you should try a clean installation of Windows 8?
    I think its worth a try in case its an software problem.
    By the way: I assume this kind of problem did not appear using Windows 7. Right?

  • Flash 9,0,124,0 security error after upgrade

    I get the following error after upgrading my Flash Player
    (after my system prompted me to install it while running the Flash
    editor):
    Internet Explorer has blocked this site from using an ActiveX
    control in an unsafe manner.
    I have uninstalled and reinstalled the player from the
    browser, about 5 times now and it continues to be a problem for IE.
    Works ok in Firefox if I manually download the FF installer. Is
    there a standalone installer for Vista/IE7 or am I forced to use
    the ActiveX installer which seems to have issues?

    Fix: Removed both (!?more than one?!) versions of flash
    player in my Programs and Features dialog, then ran
    uninstall_flash_player.exe, reset IE7 to factory spec, then
    reinstalled Flash from ActiveX. Seems to be working now.

  • What can I do if I get an internal power error after upgrading to Windows 10?

    QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
    AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
    First, you'll need to quickly set the boot options to Safe Mode:
    1. Hold the Windows key and press 'R' to open the run box.
    2. Type MSCONFIG, then press ENTER.
    3. Select the BOOT tab.
    4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
    5. Click Apply, then OK.
    6. Click Restart. (If prompted, click Restart anyway.)
    From Safe Mode disable the AMD Display Driver:
    1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
    2. Click Device Manager.
    3. Expand Display adapters to show the two display adapters.
    4. Double click AMD Radeon R9 M200X Series.
    5. Select the Driver tab.
    6. Click Disable, then click Yes to confirm.
    7. Click Close.
    8. Hold the Windows key and press the 'R' key to open the run box.
    9. Type MSCONFIG, then press ENTER.
    10. Select the BOOT tab.
    11. Uncheck Safe boot.
    12. Click Apply, then OK.
    13. Click Restart. (If prompted, click Restart anyway.)
    From Windows 10 started with the AMD Display Driver disabled:
    1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
    2. Click Device Manager.
    3. Expand Display adapters to show the two display adapters.
    4. Double click AMD Radeon R9 M200X Series.
    5. Select the Driver tab.
    6. Click Update Driver.
    7. Click Search automatically for updated driver software.
    8. An AMD driver should be found and installed.
    The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
    The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

    I'm having the same problem.  I got error message 21.  I went to apple store.  they are saying i have a hardware error.  Really, my phone was working before the update.  Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child. 
    Help please,
    I will be glad to go back to the older software update

  • On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

    On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

    I think you are sailing in uncharted waters with those kind of modifications.
    I am only guessing, but if you have not already done so,  do a PRAM reset and then trash your FCP preferences.
    Big Poppa Chris wrote:
    I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
    My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
    MtD

  • Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

    Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

    Arghhhhhhhhhhhhhhhhhhh!!!!!!
    After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
    Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
    Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
    The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
    I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive.  But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
    How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
    Words, almost, fail me.

  • TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

    Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
    My iphoto was working with photostream and now it will not connect at all.
    I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
    help!

    FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

  • Screen distortion after upgrading to mavericks os

    I own a late 2011 MBP 13". Last week I upgraded to Mavericks and regret it ever since. Firstly, it's become unbelievably slow. Secondly, and most importantly my screen resolution is now distorted and completely messed up. Immediately I suspected if Mavericks had screwed some setting. So I looked up Google for screen distortion after upgrading to Mavericks. The results were surprising! There are many apple discussions going on about the same thing. After reading most of them, as suggested in almost all threads, I took my laptop to the service station. The initial response given to me was that they suspected a hardware issue. All threads had indicated what to expect so I was not surprised. I explained to them clearly that there are discussions revolving around this topic and many users have been affected because of this. I even showed / shared the links of the various discussions on this topic. The service station in India asked for more time to investigate further. In the mean time I contacted the Indian call centre to report this problem. The service station reverted after their investigation that my logic board was corrupted and needed replacement. Phew!!! The cost of replacement is as good as buying a new MBP. It's really amusing because my MBP is less that 2 years old and unfortunately I do not have extended warranty.
    Has anyone facing the same issue been able to convince apple that this is a mavericks issue? Does even apple recognize this as an issue in the first place? Does apple expect people to blindly invest in hardware just because they have released a new OS?
    These and many more questions....
    Expecting answers!!!
    Not a good start to 2014

    The startup disk may need repairing ...
    Restart your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities in OS X Recovery

  • Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

    Hi,
    I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
    First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by  '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after  'Patch' is complete."(ERREUR02.jpg). How can I change this status?
    Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
    Thanks for your help.

    Thanks Tammy for the reply
    We already tried the suggested SAP Note couple of time without any luck.
    Regards,
    SJ

  • Error after upgrading from  sap b1 pl 35 to pl 49

    hello sap experts 
    iam getting the following error after upgrading from  sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
    "Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
    regards
    Jenny

    Hello Jenny,
    You may check by supreuser account first to see if you got the same error.  If not, it probably just related to user authorization.  If yes, it must be a bug.
    Thanks,
    Gordon

  • Imac error after upgrade to 10.8.4

    I received an error after upgrade tp brand new imac.  Error was upgrade was not installed.  Upon reboot the version of SW in About thi Mac is 10.8.4.  Bug?
    iMac i7, 21.5" 16GB memory, fusion drive.
    Thanks for input.  I assume the upgrade took.

    Verify Permissions gave me some errors, I deleted the repeats and the permissions fixed lines:
    Repairing permissions for “Macintosh HD”
    Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig” has been modified and will not be repaired.
    Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.
    Warning: SUID file “usr/bin/quota” has been modified and will not be repaired.
    +++ (multiple repairs)
    Permissions repair complete
    I verfied the HD
    Much text (removed)...
    The volume Macintosh HD appears to be OK.
    I also loaded the Apple downloads version of the upgarde and received the following (again):
    The Installation failed
    The insatllation encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
    Message was edited by: Steve51K

  • Blue screen error after USB connection

    hello, I have a new 8100. All is great, all is working, but the problem appeared after I installed the software and I connected the mobile to the computer by USB... the blue screen error of Windows Vista appeared and then
    after the automatic reboot of my computer
    it said the following mistakes:
    "Firma con problemas:
      Nombre del evento de problema: BlueScreen                        ( name of the problem )
      Versión del sistema operativo: 6.0.6000.2.0.0.768.3              ( OS version )
      Id. de configuración regional: 3082                                    ( regional configuration ID )
    Información adicional del problema:                                      ( aditional info on the problem )
      BCCode: 4e
      BCP1: 0000009A
      BCP2: 0003EA16
      BCP3: 00000006
      BCP4: 00000002
      OS Version: 6_0_6000
      Service Pack: 0_0
      Product: 768_1
    Archivos que ayudan a describir el problema:       ( files which help to describe the problem )
      C:\Windows\Minidump\Mini010609-03.dmp
      C:\Users\antonio\AppData\Local\Temp\WER-110323-0.sysdata.xml
      C:\Users\antonio\AppData\Local\Temp\WER6C68.tmp.version.txt
    Lea nuestra declaración de privacidad:
      http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0a
    I hadn't anything wrong with my Vista OS before
    thanks in advance
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    I don't read Spanish very well, but did you leave the Blackberry plugged in when you
    rebooted the PC? Vista might have tried to used the BB as a drive for error checking or system functions.
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Blue Screen Error after Synching

    I had Blackberry Desktop Manager 7 installed on my WIndows XP machine...I have been getting Blue screen errors frequently after my  Outlook is synched wiht the device..I was on BDM 6 prior to this and used to consistently get Blue Screen Errors. I used to think there was some other issue with the laptop until recently when I got a new one and I installed The desktop manager.
    Once i realised that, I uninstalled the Software from my desktop yesterday but I read a lot of blogs that said that the BSOD will continue to come as your normal uninstalls are incomplete..Could you let me know how this can be fixed? Do you have a stable version of the desktop manger that doesnt give a BSOD?
    I need to sync my device with Outlook everyday..and I cannot afford BSOD's everyday..

    Hi and Welcome to the Community!
    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Sof​tware-for-PC/Cleanly-quot-Starting-Over-quot-with-​...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    BSOD's are actually more rare of a problem, from what I've seen, and often indicate something more core wrong with the actual PC, Windows installation, or something else...and the RIM Desktop Software is simply revealing this deeper flaw rather than being the cause of it. In the worst case scenarios, I've actually heard of folks doing a clean rebuild of their PC (e.g., reinstalling Windows from scratch) and that rectifying the problem.
    Ohhh...one last thing:
    jinugeorge wrote:
    Do you have a stable version of the desktop manger that doesnt give a BSOD?
    FYI -- From the wording, I suspect you are misunderstanding the purpose of these forums. This is a user-to-user community, not a user-to/from-RIM channel for any communication whatsoever. So, by "Do You", you are actually asking that of other users, "out there", just like you who happen to be volunteering time to help others out.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blue screen error after updating to iOS8

    After I updated my OS to iOS8.0.2...... I am getting a blue screen error again and again.
    WHenever I will be using any application or opening any new application suddenly it will close with a blue screen.Then iPad restarts By itself.
    PLease suggest.

    Hi Chinmayee,
    If your iPad is restarting unexpectedly, I would suggest that you troubleshoot using the steps in this article - 
    iOS: Device unexpectedly restarts, displays Apple logo, or powers off
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Blackberry 9320 Error after upgrading app world, bbm, blackberry id

    Hi,
    I am a newbie and need some help here. I just bought a blackberry 9320 to replace my old 9700. After bought it, I upgrade the app world application to the newest version from app world website and bbm to bbm 7 from appworld app (9320 originally has bbm 6). When activated bbm, before running the bbm 7 it request to update blackberry id app to the newest. Then I managed to restore my bbm contact list through my blackberry id (previously I have bbm 7 on my 9700).
    After upgrading then I did the pull battery to clear the memory (hard reset), but after put the battery back and my blackberry booting, it load until displayed "JVM error 517". What went wrong? JVM error 517 refer to hardware software conflict. I tried to hard reset again but the result still JVM error 517. Then I reload the software OS 7.1 downloaded from blackberry website (OS 7.1 for Telkomsel, wireless service provider in my country, Indonesia). And then I upgraded again my blackberry app world & bbm same as I did at the first time I bought 9320, did the hard reset, and JVM error 517 appear again.
    Then I gave up and  just reload the OS 7.1 without upgrading any app on my blackberry 9320 and I cannot restore my bbm contact list since it is stored with my blackberry id (bbm 6 doesn't has feature to restore through blackberry id and I never back up my bbm contact list.
    Is there any way to restore my bbm contact list through blackberry id on bbm 6? Why after upgrading blackberry app world, bbm app from 6 to 7 and updating to the newest blackberry id app my blackberry went "JVM error 517"?
    Please help me to solve this so i can do upgrading without having any JVM 517 error again or restore my bbm contact from blackberry id on bbm app 6.
    Many thanks in advance.
    Regards,
    Stevanus Colonne
    If want to thanks click "Like", if problem solved by this post then click "Solution" so others can find it

    Hi Stevanuscolonne
    Sorry to hear about your bad experience with your previous BlackBerry !
    As a BlackBerry lover myself , I 'm glad you chosen BlackBerry again and Bold 9900 is indeed a good device . Its has a good processor and a huge internal memory and ofcourse some good features. 
    Regarding your Battery drainage problem,  Generally this occurs when applications runs in the background , or because of any unknown Third party application installed within our device . A regular battery pull restart is always advised for our BlackBerry . If we press and hold the Menu for a few seconds, it will pop up a screen which will show all running programs in the background ,generally five will always there ( Home, BBM, Message,Phone , Browser ) we should always look if any other apps. are running.
    Always try to Close Applications Correctly - Avoid using the End key to close applications as this simply minimizes the application and leaves it running in the background. Instead, press the Menu key, select the Close or Exit option to exit the application.Don't leave your Browser open on any active webpage when not in use.If programs run in the background it will also lead to overheating and also quick battery drainage.Please have a look at these Article I am sure it will help you a lot in overcoming your problems :
     KB14320 : How to maximize battery life and free memory on the BlackBerry smartphone.
    Good luck and enjoy your new BlackBerry
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Maybe you are looking for