F.13-clearing, new problem

HI Gurus
I have a situation that I need to clear a GL acct based on the reference field.
The items in the documents have a diff of 480$ so I put 500 as my tolerance in config- Define Tolerance Groups for G/L Accounts.
The documents I am trying to clear are CAD and USD currencies, I also have a acct defined for posting- Differences arising on G/L acct clearing- in OBXZ.
when I run f.13, the items still dont clear, please advise.
Can we clear documents in two different currencies, if they have an exchange rate diff, how is that configured, please help.
Thanks
Sharath

HI Miroslav
When I run f.13 without"include tolerances" it says "clearing procedure not carried out" and if I include tolerance and run it it says "diff too large"
And I am sure that the difference of 14$ is within my tolerance range.
I have did my config  in the following steps
1.Define Tolerance Groups for G/L Accounts
2.Define Tolerance Groups for Employees
3.Assign Users to Tolerance Groups
4.Create Accounts for Clearing Differences
5. Prepare Automatic Clearing(based on reference number the documents need to clear.)
Am I missing any config? please let me know the Tcodes.
The f.13 is working fine with the ref number as the criteria but only when the amount exactly match.
even if the difference is 10$ more it doesnt take and I defined  600$ as the tolerance and assigned to the GL master.
Thanks for all your replies
Sharath
Can you
please advise
Sharath

Similar Messages

  • New problem...SSD drive is no longer recognized

    OK, I was having the memory issues so I went out and bought new memory that is supposed to be compatible (GSKILL 2x4 MB 1333 DDR3), and now I have a brand new problem.  My SSD is no longer recognized, so I can't boot my OS.  I've tried swapping ports, swapping cables, cleared CMOS...I even put the WINDOWS 7 Disc in to see if it would find the drive in the install screen, but it says no hard drive found.
    Anybody know the issue I may be having now?

    I had a similar issue, my BIOS wouldnt recognize my Intel X25 after a blue screen in AHCI mode.
    In the BIOS I had to switch the controller type to Standard IDE. This made the drive visible again but to make it operable under AHCI, I had to use a Hex Editor from a DOS Boot Disk, and manually erase the first few sectors of the drive.
    Then I could switch the controller back to AHCI in the BIOS and repartition/reinstall Windows - Until the next blue screen .
    Obviously, doing this erases the MBR, allocation tables and partition table, and therefore makes ALL data on the drive inaccessible.

  • My IPhone 3G reception fixed, a new problem - AT&T *real* data speeds

    I've read quite a few topics on this forum regarding the poor IPhone 3G reception, and unfortunately 99% of them are emotions, making it very laborious to distill useful info out of them.
    Therefore I'd like to post my personal experience so far with IPhone 3g, listing more facts, than emotions. *I hope this will help some of you, and also hope that others will follow a more structured approach to reporting IPhone 3g problems*.
    *IPhone 3G Model MB046LL, 2.0.1 firmware*
    I got my IPhone 3g black 16gb version in NJ on August 2nd, model MB046LL. I work in IT, and I was overall very impressed with all of its features. However, the device had 2 major problems - 3g reception was highly unstable, and the actual 3g data speeds were far lower than advertised, 200kb on average for download and 30kb on average for upload.
    I called AT&T, they said I was in the zone with "the best 3g coverage". I went to an AT&T store, and had my SIM card swapped from #3022 to a newer one, #4022. Swapping the SIM card drastically improved both 3g reception and the data speeds.
    Unfortunately, I noticed that my IPhone 3g was picking up not as many bars of 3g as other Iphone 3g sitting next to me. The actual dbm numbers for 3g were also smaller. I would continue having dropped calls. I also noticed that my battery would fully recharge very fast (within 1.3 hours), and would fully discharge much faster than it was advertised. The GPS was acting weird, and the voice quality would sometimes be horrible even with 5 bars of 3g. There were more anomalies with that phone, e.g. download speed of 20-30kb with 5 bars of 3g, among other things. I would diligently take screenshots of every anomaly I saw, and store them on the phone. Restoring the phone to its factory state did not help.
    After some time, I concluded there was still something wrong my IPhone, scheduled a Genius Bar appointment, and had it replaced with a brand new IPhone 3g. Having numerous screenshots of different problems minimized the explanations to a minimum.
    *IPhone 3G Model MB048LL, 2.0.1 firmware*
    I had a chance to compare the new model with the previous one I had - the build felt a bit different. The screen on this new model has a slightly better contrast, too (compared default factory settings).
    *The new model, however, has GREAT 3g reception*. Where with the previous model I had 2-3 bars of 3g, I now have 5 bars. The dbm numbers are also somewhat improved. I had a couple of small issues with apps, etc., but I figured them out - found which apps were crashing the system, and deleted them, cleaned up the old backups and the crash diagnostic crash reports from the previous model, etc. Finally all other problems I was having with the previous model are now gone, too, except the quirkiness of the GPS, but I suspect it's the new firmware, and not much I can do about it. I have yet to see a dropped call on this new model.
    However this new model identified a new problem, something that I'd suspected for some time: it appears that the problems people are having could indeed be the combination of IPhone hardware/software and AT&T network.
    I noticed the data speeds vary significantly throughout the day, even when you sit at the same desk. I noticed the speed drops significantly approximately during lunch time to ~90-300kb for download, would be ok during the day (~200-350kb for download), and would be AWESOME after 10pm - ~0.9 - 1.4Mbs.
    One can make a conclusion here that AT&T simply does not have enough network capacity to handle the peak data load, when many people connect on the network. It could be that IPhone's software does not manage very well under such conditions, but I'd would place more blame on AT&T in this case, considering how exceptionally well IPhone performs during other times.
    I'd like to point out that although both Apple and AT&T reps were genuinely trying to be helpful, I could clearly see that not one person I talked to on both sides did not have a clear solution how to resolve the problems I was having. Basically, I had to figure out what the problem could be, and use the resources available to try to solve it - be that replacing the phone, restoring from backups, monitoring the crash logs for problematic apps, etc.
    Message was edited by: rndip077
    Message was edited by: rndip077
    Message was edited by: rndip077

    I would constructively suggest that you edit your post pretty quickly if you want to avoid a highly deserved, verbal battering from every unemotional, highly rational and intelligent poster on this forum who might take offence to your demeaning attitude. I think to assume that because people who have posted on here have posted at all because they are emotional basket-cases, or in some way out of control of their emotions merely because they have aired their disappointment/disgust/anger with their sub-functioning iPhones is pretty insulting and undeserved. Whatever YOU have written here, or have experienced elsewhere, still only has the value of 1 (ONE). It is a poll of 1. It is an opinion of 1. No more valid than that, no more authority than that.

  • Printing, new problem, tiny size, not cured by any steps identified in support.

    A new problem a few weeks old. When I print from Firefox, the result is a very tiny image printed at the top part of the page. If I change the settings, it chops each page up into 4 pages and prints a quarter on each page. I do not have this problem if I print from IE, so not a printer problem. I have been through every single step in the help topic on printing problems and any step suggested in answer to a forum question. No joy.

    If Firefox is not using the whole sheet of paper, this can be caused by having extracted the wrong paper size settings from Windows when reading the print driver data. Clearing it can involve finding some obscure settings, but here goes:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''print''' and pause while the list is filtered
    (3) For each setting for the problem printer, right-click and Reset it. The fastest way is to right-click with the mouse and then press the r key on the keyboard with your other hand.
    Note: In a couple other threads involving Brother printers, the preference '''printer_''printer_name''.print_paper_data''' was set to 256 and when the user edited it to 1 that fixed the paper size problem. If you see a 256 there, you can edit the value by doubling-clicking it or using right-click>Modify.
    Any improvement?

  • New Problem with Premiere Elements 8-Blue overlay over video

    I'm still trying to begin using the trial version of Premiere Elements and have a new problem.  When I add video files to the project, they are displayed with a blue coating over the whole video when it is played, or in many cases it is just black with no video.  If I click in the screen, I see
    the stopped video as it shoiuld be (clear), but as soon as I start playing the video, then nothing works. I hear the audio but the video is either black or has a blue overlay making it difficult  to even see what is on the screen.  I've tried changing to software rendering during playback with no help.  The program is unusable as it is.  I also have problems adding files to the project when I try to add from files and folders.  I can't select multiple files and when I try to add one at a time, the 2nd file replaces the first instead of being added.  I installed using the compatibility options in Win 7 because the application is listed as being incomaptible (even though Adobe claims it is Win 7 compatible.)  I would really love to have this program work.  Any suggestions.  I  have a fairly powerful computer except for the graphics being Intel integrated rather than a separate card.

    To answer my own question, disabling "Enable GPU" seems to eliminate the blue overlay.  I found a reference to it on a page that previously was not available.

  • P6N Diamond New Problem: Second HDD Randomly Starts/Stops Since recent Update

    Howdy All,
    Continuing problems with the P5N Diamond.
    This one's new.
    Previously I had the same problem as many others with the cold boot issue. Somehow, someway, it just stopped: cold boot or not, one day it just started booting fine....go figure.
    However, I recently (about 3 weeks ago) did the MSI live update that included something or other pertaining to the E-SATA....support for it or something to that end. Although I don't use the E-SATA, I installed it thinking I might at some point and since installing it, I have discovered a new problem: my second drives (in RAID 0) just opens/closes randomly. It seems to mostly occur when operating demanding programs: gaming, watching a video, that sort of thing.
    Everytime it does this, it takes me to desktop and asks me what program I want to use to open the program......which when I do, is nothing more than my second (D drive) HDDs in RAID 0. I then get the yellow pop up message in the bottom toolbar from Windows saying it's experienced a write failure problem. It hasn't done any damage that I can tell and I've lost nothing, but being taken to desktop perpetually is a major issue. This problem is driving me absolutely up the wall. No sooner than I start to do something and wham.....I'm at desktop being asked what program I want to use to open up the second HDDs. I've also tried just leaving it open but to no avail: it just randomly continues to open and close.
    I have my O/S on the C drive and 2 more HDDs in RAID O for back up on ports 6 & 7. Since doing the MSI update that included the E-SATA whatever, this new problem almost prevents the computer from being usable: certainly nothing in gaming is possible along with anything that requires uninterruption.
    Here's my system:
    M/B: P6N Diamond
    CPU: E6850
    RAM: Corsair XMS PC-8500, 2 x 1 gig
    HDD: 1- WD 150 Raptor
    HDD: 2- WD 5000AAKS in Raid 0
    Vid Card: EVGA 8800GTX
    PSU: PC Power & Cooling 750 Silencer
    ODD: Sony DRU 830A
    FDD: Sony Floppy
    Misc: Scythe fans x 5
    O/S: XP Pro w/ SP2
    Running BIOS 1.2
    So, being fairly certain the MSI update created the problem, my question is, how do I undo the MSI's most recent update to remove it? When I go into Add/Remove Programs, nothing is listed there. I'm not sure this is the source of the problem but I do know I didn't have it beforehand.
    I'd greatly appreciate any help with this....even any ideas. While I have some computer knowledge, I'm not as tech savvy as most here, but this problem is, apart from driving me up a wall, making the computer almost unusable. FYI, I haven't done a System Restore because I've installed several things since and don't want to lose them if I can isolate the problem, but I will if that's what you all recommend.
    Again, sorry for what may be a noobish question, but I'm not sure where else to go. After dealing with MSI's tech support, I'd rather talk to a wall.
    Thanks greatly.
    Pepper1

    Mark,
    Forgive me for asking, but I am a bit confused. Is your "cold boot issue" now solved? If so, do you think that the new drives are the key?
    Lev
    Quote from: MarkJohnson on 17-December-07, 14:21:23
    Sorry for late post.
    After setting up the HW RAID (2500YS) for booting the system still cold boots.  strangely this time the reset (Ctrl+Alt+Del) doesn't seem to work.  I must of did it two dozen times and it would never clear.  I then just powered off after the other 2 drives on the nvidia SATA cleared and seen the HD LED light up and stay on for a few seconds(seems stuck on the 4723 checks of the drive) and then powered down and powered right back up with no cold boot issue.  It has worked this way every time for the last week or so and I tested it like 20 or so times(3-4 times a day).  These drives are listed as being compatible after the firmware update (and I did that already) so I guess it is either the MB BIOS needs updating or it's the way the nvidia chipset runs this setup is wacky.  This is assuming the 4723 HD compatibility list is correct.
    here's a summary of the drives so far.
    36GB Raptors (old revision) - can take forever to boot properly and corrupted my disk in 3 days of testing (scrambled my directory structure)
    105GB Raptors - Just reset(Ctrl+Alt+Del) 1-4 times after the HD LED goes solid for a few seconds.  worked for two months no errors.
    250GB Caviar RE(2500YS) - have to power off (power button) when HD LED goes solid.  so far no problems for a week.
    80 GB SATA II Hitachi Deskstar (HDS728080PLA380 - May 2005) - same as 150 GB Raptors, just a reset or four, only did a days worth of testing with no errors.
    well, I was hoping for those 2500YS to work properly.  Now it makes it really hard to track the problems with so many different errors and 3 different places it can go wrong 4723/nvidia/msi/HD Manufacturer.  wait, that's 4.  Oh boy!
    Hopefully this gets resolved soon.  I've already had to move this MB to my secondary system, and for other reasons than this.  I didn't mind hitting the reset button to get this to run.  I get the feeling that MSI has abandoned this board on us.  with the new P7N being released it will be even harder to get anyone to mess with this thing.
    -=Mark=-

  • New problem printing from InDesign CS4 in Lion

    After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from  InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
    "Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
    This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
    I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
    I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
    Any help would be greatly appreciated!

    mmsteer,
    I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
    Remove the Adobe PDF PPDs from the following folders:
    OS/Library/Printers/PPDs/contents/Resources/en.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
    OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
    Be sure to go to your system Library, not your user Library.
    Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
    Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

  • I just ran the most current Firefox update and now the program won't open. I keep getting an error for the XUL Runner that says "Platform version 6.0.2 is not compatible with minversion =6.0.1 maxversion 6.0.1. Restarting didn't clear this problem.

    I also did a System Restore and that didn't clear the problem, either.

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??

    New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??
    iPhone 5s
    Software - IOS 8.1
    iTunes - v12
    I have been using sync on all previous phones to date without issue, I have had the 5s since Nov 2014 and no issue, on Sunday without warning or changes to my phone or Outlook sync now has this error.
    I have restored my phone but still has same problem.

    Your IT person is an idiot.
    http://lmgtfy.com/?q=how+to+sync+iphone+with+outlook

  • Two new problems with the Quicktime Plug-in

    I recently discovered two new problems with the current Quicktime Plug-in for Mac OS X.
    First, the Quicktime Plug-in is unable to stream Quicktime media in any internet browsers other than Safari.
    There is just nothing on the spot where the embedded Quicktime player should be.
    Second, the Quicktime Plug-in only shows the message "The operation couldn't be completed. This file is not a movie file (-2048)"
    everytime it should work together with the Flip4Mac Plug-in. The thing is, when facing a webpage where a wmv or wma file is
    embedded, there only shows that error message on the spot where the player should exist. I first thought that it would be a
    problem with Flip4Mac. So I uploaded about this problem on telestream.net, only to hear that the error message above belongs
    to the Quicktime Plug-in.
    Both of these problems did not happen at all only three weeks ago. The embedded Quicktime player showed up without any problem
    in my Firefox and Opera, and wmv or wma files were streamed successfully through the Flip4Mac and Quicktime Plug-ins.
    Then, suddenly, after some point, these two problems began to occur, and there is no information on how to solve them on the web.
    I obviously tried uninstalling and reinstalling Quicktime. I even completely erased the hard disk of my Macbook, and reinstalled the
    whole Mac OS X. But the problems still remained. I borrowed another Macbook from my friend to check whether these problems
    occur in other computers, and they did occur in my friend's Macbook as well. So they are definitely not the matter of my own Macbook only.
    I think these might be the problems with the new Quicktime Plug-in 7.7.1.
    Please check about these problems and solve them on the next version of the Quicktime Plug-in.
    I will give you a couple of hyperlinks so that you can check about the problems directly.
    http://blog.naver.com/dbswhddlf1?Redirect=Log&logNo=130025903581
    ↑ This link is for the first problem (the embedded Quicktime player not showing up in any browsers other than Safari)
    http://blog.daum.net/wellabc/15434322
    ↑ This link is for the second problem (the error message showing up on the spot where a wmv or wma file should be streamed)
    p.s: I am sorry that I am Korean.

    I recommend that you repeat all this via
    http://www.apple.com/feedback/quicktime.html
    to make sure that Apple will see it.

  • Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

    Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
    This is a new problem and was not the case before.

    Works perfectly fine for me with the latest Reader version (11.0.09).
    You write that it worked "before"; before what?  An update?  Update from what version to what version?

  • I have a MAC running 10.6. I cant get firefox to connect to the internet unless I first open Safari and connect. Firefox works fine after that. This is a new problem on my machine How do I correct for this?

    When I boot my Mac (Snowleapord 10.6) and attempt to start Firefox, the system alerts me that it cannot find the internet and requests that I try again. It is not until I start Safari, establish a connection that I can get firefox to work. This is a new problem. Until recently, things worked fine. How do I resolve this issue?

    Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
    My solution; very simply use timemachine to restore the previous Frefox 3.x
    worked great in 3 mns

  • My itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

    my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

    Hello Bebyida,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    http://www.apple.com/itunes/download/
    Best of luck,
    Mario

  • New problem, Lycos Mail is my home page. When I open a new window I usually get Google search, which is what I want. Now, somehow when I open a new window I get Yahoo search. How do I change it back to Google? Thank you, Randy

    New problem, Lycos Mail is my home page. When I open a new window I usually get Google search, which is what I want. Now, somehow when I open a new window I get Yahoo search. How do I change it back to Google?
    Thank you,
    Randy

    A new tab opens by default as a blank tab (about:blank).
    If that isn't the case then an extension has changed that behavior.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    You can middle-click or hold down Ctrl and left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
    You can look at this extension to set which page to open in a new tab:
    * NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/

  • Old Problem/New Problem: Lightroom can't find file, then finds, but won't edit it.

    (Lightroom 2; Macintosh G5; OS X (10.4.11))
    First, the old problem which, though unresolved, is here mostly for background:
    A little over a month ago, I posted a question (at http://forums.adobe.com/thread/480423?tstart=0 ).
    The short version of that problem is that certain previously accessible images were not able to be opened in Lighroom. The preview image appeared in the main window accompanied by this message across the top of it:
    "The file named "[name of image/file]" is offline or missing."
    When I right clicked on the image and selected "Show in finder" I got this message:
    "The photo '[name of file]' could not be used because the original file could not be found. Would you like to locate it?"
    Below which was shown the original path to the file. In the middle of that path, one or more folders appeared with colons in their names in place of the slashes originally part of the names (some folders have dates in their names). Following the path via the Finder, the file was exactly where it was supposed to be, although, of course, slashes appeared instead of the colons that were in the Lightroom summary of the original path, but Lightroom couldn't find them.
    I was convinced that Lightroom was renaming the folders (but only in its interface; the original folders had correct names in the finder -- which is the only way they could have been named, since colons are illegal characters and won't be accepted as part of a file name). But I see now that there is some weird thing going on in the Finder itself. Even though I see the correct name on a folder when I search for it, or navigate through the hierarchy, if I click on the file at the end of that hierarchy (the file that Lightroom said it couldn't find) and ask for file info (via Command - I, or other method), the path to that file shows colons where slashes should be, but only in the names of the folders that were so named in Lightroom. All other folders with slashes in their names are listed correctly. So it's a Finder problem. Though this is still a mystery, I have been able to work around the problem. But how is this happening? (Note that I will be reformulating the question and posting it on the Apple discussion groups soon; I don't expect this forum to deal with Apple system issues. Just thought that others here may have had the same problem.)
    Now, the new problem, possibly related to the old one:
    In the same collection where I noted the previous problem, I selected an image that I wanted to print. The preview came up with this message:
    "The file could not be found."
    But when I right click on the image and select "Show in finder" it opens the correct Finder window with the file in question highlighted. The file, a TIFF, opens normally in Preview or Photoshop.
    So why does Lightroom think it's not there? (even though it can show me exactly where it is)
    I have edited this photo in Lightroom before. I have printed it from Lightroom before (as shown in the Lightroom history). But today it can't be edited, won't print and "could not be found"!!!
    I know I can print from Photoshop, or re-import this photo into Lightroom (along with any others that Lightroom "can't find"), though both would require time and re-editing the original. I would rather understand (if that's possible) why this is happening in the first place, so hopefully I can avoid such wackiness in the future.
    I realize that may have to burn some sage and hire a Shaman, but any ideas that won't smoke up the house or scare the cats would be most welcome.
    Thanks for reading.
    Leonard B.

    If you have an old goat around that's not doing so well, consider the sacrifice.
    The one thing that occurs to me besides the Gremlin, is the use of colons or slashes or some other character that the OS or LR doesn't like in some file name or other.  I think you'd have to change same in Finder, then show LR where the images are.

Maybe you are looking for