F.13 not clearing items

Hi All,
We have the following situation
1. We are running f.13 with the selection parameters  company code, fiscal year & one GL account ( for freight for outbound shipments)
2. When we check the output we do not see any Cleared items. We also checked the BSIS table entry & the entries are not getting cleared from this table
3. We have checked the customising in OB74 & for this GL account the criteria settings are maintained as below
     S     263002     263002     ZUONR     VBUND
4. We have also checked the GL account & it is maintained to clear the open items.
Can somebody help to understand what is missing & what needs to be done to clear this GL account automatically
Your help in this is appreciated
Regards
Ramesh

Hi,
In the F.13 selection screen, at the bottom, select the option "Documents that can not be cleared" and 'Documents that can be cleared"
And then execute.
You will see the various documents in this GL and the total based on your clearing creteria. It the total is zero, then it will clear off, otherwise you need to change the clearing creteria to other fields for which total is zero.
Regards,
Gaurav

Similar Messages

  • Cleared item not updated in Main Bank Account FEBAN

    Hi Experts,
    i entered manual bank statement through FF67 and saved it. then i went to FEBAN to view if there was any open item left in this statement so that it can be posted manually. in FEBAN i found not a single open item in this statement which meant that all items of bank statement were transferred to main account. but when i viewed the main account G/L through FAGLL03 i found no item transferred. the cleared items shown in FEBAN are not transferred to main account. this has happened with only one statement. all other were posted successfully and values were updated in main account. Please guide me what do i have to do in order to fix this,
    Regards,

    Hi faizan,
    I would suggest you to delete that statement & re-process the statement via FF67 in the back ground or creating log rather than you continue with FEBAN.
    However, if you want to continue with FEBAN then go to EDIT --> Posting Mode --> Foreground or Background.
    In case of any issue, please let me know.
    NOTE: if it is helpful please assign the point.
    Regards,
    Dattatraya Biradar

  • System not clearing the Payment request items with the payments

    HI Everybody,
    User getting an issue relating to clearing of the payment request items. In a particular Contract account, it has got 51.75 Pounds of Bank Giro incoming payment. It has contains some 5 items of payment, 3 items of 10.75 and 1 Item of 21.70. The 3 items of 10.75 were cleared 3 payment reqquest items and since there is no due payment requests were there at that time, this 21.70 was showing pending credit item. After two days  two payment requests came as due. There are jobs which run daily for FPMA. But this 21.70 is not clearing to this due payemnt requests. I tried to run this FPMA manually for this contract account. But these were not cleared.
    Could anybody suggest anything on this why these items were not clearing against each other?
    Thanks & Regards
    Siva

    Hi
    The issue is due to the implementation of support packs. Specifically to do with note 1005708.
    siva

  • APP Open Item Not cleared

    Hi All,
    I have strange issue. automatic payment run is executed and after that i have messgae
    Posting orders: 23 generated, 22 completed
    i have 23 clearing document but one document which is generated its not cleared the open item and even am not finding that
    document no in FB03 t code.
    can you give give me your overview on this issue
    "Posting orders: 23 generated, 22 completed" : Why this type of messgage genarated and what will be the reason
    Thank you

    With reference to the issue reported, as you have noticed the number of generated documents and the number of completed documents are different
    ->  "Posting orders: 23 generated, 22 completed". This is a clear indicator that there was something wrong with the update process and the payment document did not get posted. The reason why you have more documents generated than completed maybe due to update terminations on the executing the payment run. It means one of document was not posted
    in the database. You could find the terminated update using SM13. Here you can find an update termination found via sm13 when user processed the payment.
    Also please review the attached note 86578, especially the third recommendation and payment run processing option number 1. Comparison of 'Completed' orders to 'Generated' orders as stated will result in
    identification of incomplete posting problems. Also check this note 70085 which has very good information:
    If you have such terminations in future and documents were not posted, then please try the following
       F110 menupath: Edit   > Payments   > After termination   >
                      Draw up again.
    Else the correction to be taken is to recreate manually the missing document and update the relevant cleared line items with the
    payment document as the clearing document:
    1.Use report RFVBER00 to find document gaps:
    2.Pay the invoices manually.
    You should be able to avoid double payment by using the below option in the print program i.e.
    You should always select the flag "Payment doc.validation" on running your RFFO* report.
    It gives an option to check if the payment documents are already in the system or not, and if it's not the print program excludes this data for payment.
    Hope this information helps.
    Best Regards
    Soumya

  • Customer open item not cleared

    Hi experts
    For a customer open item,when deposited cheque in bank trough t code ff68
    the line item remains as open but not cleared.
    thanks in advance

    Hello,
    After the end of the process you should check the results in order to identify if the account informations were found in order to clear the item.
    Regards,
    REnan

  • Cleared items not appearing When  we click cleared items in T.code FBL3N

    Hi all,
            We have prepared one ABAP program, to clear all open items for a particular GL account, company code, period, fiscalyear,
             When we run this program, the open items are clearing but not appearing in cleared items,
             Can any one help me out on this........
    Appreciated with points...
    Regards,
    sai........

    Hi,
    Check the cleared items in table BSIS, if the items are clearing then those items should appear in this table. Otherwise i doubt your program is not working?
    Debug the program and check from which tables its selecting the data  ie it should select the GL open items from table BSIS.
    Raj

  • FINSTA Bankstatement does not clear Open Items

    Dear SAP guru,
    I am experiencing an issue where FINSTA bankstatement generated in IHC module does not clear Open items in reciving company code. I would like to get the system to search for the document based on the original FI document number and clear it. The situation is
    The bank statement successfully processed has an original document number and processed.
    In IMG for EBS, I configure as algorism used is 20 - Document number search and Bank Posting type 4: Clear Debit GL account
    Clearing account -  and have the posting with relevant document number matched with the bankstatement.
    It seems that the system does not find the matching at all.
    Could any of you shed some light on what I am missing???
    Kind regards
    Taro

    Creating or even using something like a data migration account is the best way.
    Are you saying that you have a GL account with say 100 line items and you want them all cleared. If that is the case you wont need a LSMW, make sure you know the amount, and then create a journal posting to your new GL account, and select all items in the GL account you want to clear.
    If there are various GL accounts, again no real problem, in F-03 which is what you would be using, you can enter more than GL account so that should not be an issue.

  • FBL5N Cleared items not having the Sales org

    Hi Guys,
    In FBL5n open items having the Sales org (XREF1), when we are clearing the Documents, Sales org (XREF1) not coming to the cleared items.
    Is any user exit or BADI to populate the value to Cleared items also?
    Thanks
    Gourisankar.

    Hi
    Cleared and open items should be the same, i.e open item are cleared item before clearing it.
    So I suppose u mean the items of clearing document?
    If it's so u should check your FI customizing because it should be a clearing rule, so perhaps it shlould be better to ask it to your FI consultant
    Max

  • Payment run  - should not clear the open item but should post payment doc

    Hi Gurus,
    Can you please help me , on how to acheive like when payment run F110 post the payment doc it should not close the open item rather keep that open item as open item , but hsould be be paid by payment doc posted through payment run F110.
    Have any one of you had similar requirement ..? FICO gurus help me to acheiev this .. any exit /BADI ..or ideas..
    Appreciate your help in advance

    HI ,
    Thanks for your reply , but still I am not clear on that.
    reason they want to keep this open to be kept as open item , so that item will be picked up by dunning run ..
    Basically  the open invoice is being cleared by payment doc which was generated by payment run. If we look at BSEG in the open item record BSEG-AUGBL = will have the clearing doc number , and in addition to that BSEG will have created another record for the clearing doc as well .
    May be since open invoice record is being updated with clearing doc (AUGBL ) , I belive its not shown up as open item .
    Somehow this item should be kept as open item ... that is the req and also paid item payment reference should be transfered to Bill of exchange as well.
    Hope you have clear background of my req...
    Tnanks in advance ,

  • Not clearing Open items in Automatic Clearing Program

    Hi all,
    I am trying to execute Automatic Clearing Program throug F.13 transaction, but it is not clearing the relavent open items. When  I have tried to execute in Test Run mode, it is displaying the open items, but in production run it is not clearing the relavent items. In OB74, I have selected the criteria 1, Criteria 2 and Criteria 3 as Vendor Number, Purchase Document and Assignment respectively.
    Please suggest me, what I have to do to clear open items
    Regards
    Chandra

    Hi,
    Please check whether the accounts you are selecting for clearing are either are subledger or maintained at open item level managed.
    Hope this helps, if yes, please assign points.
    Regards,
    Harish

  • FBRA-Document includes already cleared items - reversal not possible

    While reset and reversal using FBRA I am getting the following error. Please do let me know if any clue to resolve this issue.
    Document includes already cleared items - reversal not possible
    Message no. F5 308
    Diagnosis
    A reverse posting clears all line items that are managed as open items. This is not possible if one of the items in question has already been cleared by another method.
    System Response
    Error message.
    Procedure
    If you really want to reverse the document with the number you specified, display the cleared items and reset all those items for which you can find clearing document numbers. Then repeat the reverse transaction.

    Hi Dewang,
    Thanks for your quick responce.
    step 01- Posted Customer Invoice on 01-Jan-2011with RV doc with Rs-1200: Doc 111111
    Step 02- Posted Customer downpayment on 01-Jan-2011 with DZ doc with Rs-1200: Doc No 2222222
    Step 03- Clear Customer line items on 10-Jan-2011 with AB doc with Doc no- 3333333
    Trying to reverse Cleared Item (i.e. Doc No 3333333) with T-Code FBRA. While doing Reset and reversal we are getting the above problem.
    Please let me know if you need any information.
    Regards
    Raj

  • GL posting clearing item amount and do not show doc status on the header

    Hello,
    GL post clearing amount both side and increase the no of items in the GL balance display. Inaddition, these clearing line item document header does not show document status field.  I have another GL which does not post extra two lines and clearing item document is empty and header shows document status as A (cleared item).
    Could you let me know what the difference and what need to be changed to make it not to post clearing items + and - and show doc status.
    Both are same FSG and only difference tick mark not done for balance in local currency.

    Thanks for your reply...but thats did not work. As I said earlier, I have a Structure in my rows and 2 characteristics in my free chracteristics and in my columns I have a selection of key figures...
    What I want is when I drill down on one of my 2 free characteristics, I do not want to see rows with amounts (KFs) zero or space.
    RR

  • Inventory in transit open item account not cleared

    Hi
    Inventory in transit open item managed account not cleared with green light.
    But i can see clearing document number and date inFBL3N.what could be the reason?
    Thanks
    cris

    Dear,
    Please check in FBL3N, the open date should be greater than or equal to clearing date, if it is less than then it will show as Open i.e. in Red Color.
    Br,Vivek

  • Not cleared two line items from the GR/IR clearing

    For one of the items in PO following transactions are done...
            Mtype   Date            Quantity             Amount
    GR   101    06/14/09        1 02.001            887.85
    GR   102    06/14/09        102.001-            887.85
    GR   101    06/14/09        101.999             887.85
    GR   101    07/22/09        102.001             923.61
    IR-L            06/14/09        102.001            887.85
    IR-L            06/14/09        101.999            887.85
    FBL3N: out put
    Open items
    Doc Type  Date                           Amount
    WE           06/14/2009 86            887.85
    WE           07/22/2009 96            923.61-
    Cleared items:
    Doc Type  Date                           Amount                                                                     
    WE            06/14/2009  96              887.85-
    Z9             06/09/2009  86              887.85
    WE            06/14/2009  96              887.85-
    Z9             06/09/2009  86              887.85
    System has not cleared two line items from the GR/IR clearing for this line item in PO.
    What could be the reason these items are not cleared and now how these line
    items can be cleared?

    Hi,
    When the Dr and Cr amount are equal to zero system will automatically clear the line items in F.13.  Here the open items are appearing with different amounts due to that system not able to clear.
    By passing some manual JV or something you done to make Dr and Cr equal to zero then you clear through F-03(untick post automatically for this clearing in T.cdoe FS00)
    Regards,
    Sankar

  • Lov returned items are not cleared in Jheadstart 11.1.1.4.26

    We are using Jheadstart 11.1.1.4.26 with Jdeveloper 11.1.1.4
    HR Testcase:
    Form UI
    Lov on the Manager_FirstName
    returns
    ManagerId -> ManagerId
    FirstName -> Manager_Firstname
    LastName -> Manager_Lastname
    1: Select a manager from the LOV popup. ManagerId,FirstName,LastName are filled
    2: Clear the Manager_Firstname from the Lov inputext. Returned Values should be automatically cleared (at least they used to in previous version). They dont in this version.
    I am sending a testcase to [email protected]
    Regards

    Thanks for looking at the testcase.
    I emailed you a new one with screenshots of the steps required to reproduce it.
    Conserning the previous test case I have sent, you are correct. I made a mistake by returning the
    ManagerId back to ManagerId where it should be EmployeeId copied back to ManagerId.
    However the items are not cleared in my Environment if you set a value from the LOV popup and then clear the value of the textinput. (No saving should be performed between these two steps).
    If you perform a save between these two steps the items are all cleared.
    Are you using Jdeveloper 11.1.1.4 ?
    Regards
    Vasileios
    Edited by: spooker on 6 Μαϊ 2012 10:03 πμ
    I am attaching another testcase with steps here. This is different from the one I emailed you but illustrates the same issue.
    It is as if the item the Lov is based on does not autosubmit when it loses focus (click somewhere in the page)
    steps to reproduce word document --> http://herosh.com/download/10867921/testcase.doc.html (just click the green download link)
    testcase--> http://herosh.com/download/10867918/HR.rar.html (just click the green download link)
    Edited by: spooker on 6 Μαϊ 2012 11:05 πμ

Maybe you are looking for