F.19 GRIR reclassification - Item not selected in the report log

Hi Guru,
There are two items (one cleared pair) which are not selected into GRIR reclassification (Tcode F.19), both posting date is on 30.05.2007, while wiht cleared date on 30.06.2007 (clearing document with posting date on 31.05.2007), why they are not counted in the reclassification report. pls advice, I really donot have any clue about it.
Thanks,
Kick

Hi All,
why nobody reply this question, is it the question not clear?
There are two items (one cleared pair) which are not selected into GRIR reclassification (Tcode F.19), both posting date is on 30.05.2007, while with cleared date on 30.06.2007 (clearing document with posting date on 31.05.2007), why they are not counted in the reclassification report. the reclassification has been done on the last day of May.  pls advice, I really donot have any clue about it.

Similar Messages

  • Item not selected in document

    Dear All,
    while doing MIGO(GR) the message comes "item not selected in document".
    Please suggest what i can do to process.
    Thanks and Regards,
    Baiju

    hi  BAIJUKUMAR   ,
    in migo ok baton is there select on it after u check, u  will not get error
    hope it will work
    regards
    biswa

  • Delete items not selected button

    hi,
    in miro, there is 1 refresh button at the bottom.
    when i create invoice with reference to PO, i need to click this button to make the miro display po line item amount and quantity. later i need to click deselect all button and select the line item that i want.
    may i know how to directly select the line that i want with amount and quantity displayed instead of do several steps as mentioned above.
    also, the button name is misleading. why it is called delete items not selected?
    thanks

    Hmmm -- to be totally confident not any item inside a given frame uses your color needs a lot of checks.
    Check this quite similar request:
    Spot color used in indesign document
    My comment was that to be sure you'd need to check, amongst others, every single character for either fill or stroke, table strokes and fills, paragraph rules, underline and strikeout ...

  • You can creat any open item , you are remember not selecting for the open i

    you can creat for any openitem, you are not selecting for the open item in FS00,, your already posting for the entries at the end of the month, you can select for openitem is it possible

    Hi,
    No.
    Aravind Boddupalli

  • Committment item not getting reflected in Report -S_ALR_87013558

    Dear ALL,
    I've made all the necessary conifg for Committment item ,but still when i create the PR from project and the same is converte to PO ,in the report S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned itz not reflecting.
    Are there any config to be done.
    plz help n guide
    itz urgent
    Thanks in advance
    Manohar

    Hi Sridhar,
    Thanks for the input.
    But still Budget is not appearing in the report, even after running CJBN & CJEN.
    I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
    Regards,
    Selva

  • On i-pad, when try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no my request and item not available in the U.S. store. WWJD?

    On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do?  Please don't tell me I have to buy a new Mac to be up to date.

    On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.

  • Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer

    I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
    Is there any workaround to this error?  so that drillthrough can be done even with multiple selection.

    Hi Vikas,
    The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
    Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted. 
    For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
    When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
    1. Select a single Item.
    2. Select all items.
    Hope this helps!
    Please mark as Answer if this helps! Thanks, Rajasekhar.

  • HT5622 i moved from Egypt to Canada, changed my info on app and still can't get some app because " item not available in the Egyptian store"

    i moved from country to another, changed my info in app ID and still can't get some apps because  item not available in the home country's store? any idea?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • I am seeing Item Not Available in the U.S. store for iTunes music on the iPhone. Is anyone else seeing this?

    I am seeing Item Not Available in the U.S. store for iTunes music on the iPhone 6Plus. Is anyone else seeing this?
    The other sections of the iTunes store seem to have errors as well.

    I've seen a couple of other threads in the last 10 minutes posting about problem with the store, both have now replied saying that it's working again for them - you could give it another go and see if it's now ok for you

  • You did not select all the docs belonging to the cross-co code transact Message no. F5876

    Hello All,
    When Cross company document is reversed with FBU8, Only one (1) leg is reversed and another (2) is not.
    For internal audit purpose, when any document is reversed, User should attach some proofs and then he should reverse it.
    When I tried to reverse only (2) leg through FBU8, I am getting this error – “You did not select all the docs belonging to the cross-co code transact Message no. F5876”.
    Pls give me some inputs how to reverse (2) leg.
    Thanks

    Hello Kalim - I am getting error message. We can not make it to warning message, though we have option in OBA5.
    Any other alternatives?
    Thanks

  • Section not visible in the report painter

    Hi Gurus,
    I created a report painter report for showing the P&L statement for a company code. I had to added a new section for calculating the statistical key figures. I was able to display the 2 sections initially, but later after changing some layout the keyfigures section is not visible anymore.
    Please let me know how can I retrieve the Key figures section.
    Thanks

    Hi Christian,
    And if you execute the report you don't see the second section?
    Yes, I am able to see the section in the edit mode and not when execute the report.
    In the report layout "formatting / report layout" in the area "rows / treatment of zero rows" are the rows hidden if the value is zero?
    The standard section layout has zero rows hidden. I tried changing it to print zero rows, but that didn't help.
    Maybe you have a selection where you only have zero values in this section so it does not appear?
    I was able to see the section in execute mode once, but then I tried to change the layout which caused me this problem. Please let me know if you have any other inputs.

  • EP log type INFO not written to the portal.log file

    All the log.info (where log is of type PortalRuntime Logger) statements in my code are not written  to the portal.log file.
    I have configured the portal_logger to log ALL but it seems to log only the FATAL and WARNING messages and not the INFO ones.I am on EP6 SP2
    Thanks
    Sid

    Let me rephrase my question.
    In the portal logs configuration (Sys Adm - Monitoring - Logging Console - portal_logger ) if you select ALL, should it not log messages of all types ( ERROR WARNING INFO )? When I select ALL for the portal_logger the portal.log doesn't display the log messages of type INFO (only the once of type ERROR or WARNING).

  • Error Message: "The formula syntax is not supported by the report"

    We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
    I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
    doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
    But when I tried to Add FormulaField, it succeeds
    Please help me in knowing how to add SQlExpressionFields to ReportDocument.
    Regards,
    -atul

    Thanx Don & Ludek for the reply.
    CR provides support for addition/modification of SQLExpressions.
    CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
    CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
    innerReport .SQLExpressionFields.Add(name, strSQLExpression)
    CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
    Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
    Thanx
    -atul
    Edited by: Atul Chivate on Aug 21, 2011 6:13 PM

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • Data Migration Opening Balances are not updating in the Report F.08

    Hi,
    We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
    Why they are not updating in the report. In which table can i check the Data migration values in the system?
    Thansk
    Kishore

    Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
    F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
    Why it is showing like that?
    Thansk
    kishore

Maybe you are looking for