F-21 is not updating last payment date in Credit management report

HI Gurus
I am working on 4.6C system . Here I am posting incoming payment through F-21 t.code. Here system not updating for last payment run in Credit management reports.
Pls advice me in this regard.
Thanks in advance
Sneha

Hi,
F-21 T.code is for Transfer Posting, best Pratice is to use F-28 For incomming Payments.even in F-21 change the documents type to DZ and try to post.
Thanks
Goutam

Similar Messages

MBAM "Enterprise Compliance Report" not updating "Last Contact" date/time for any/all systems.

Running BitLocker/MBAM 1.0.1237.1.
About 1 month ago, "Last Contact" date/time listed in MBAM "Enterprise Compliance Report" stopped updating (last updated 1 month ago) for all systems. However, reporting against these exact same systems individually via
"Computer Compliance Report" shows current/correct "Last Contact" date/time (last updated today).
Have tried http://support.microsoft.com/kb/2620269/en-us but no luck.
Hoping someone has experienced this before, fixed, and can share insights.
Thx,
DCL

You may want to look for communication errors under the MBAM node in Event Viewer.
You may also want to review the registry settings discussed under the
Configure Lab Computers for MBAM Evaluation section of this TechNet article:
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\ClientWakeupFrequency
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\StatusReportingFrequency
HKLM\Software\Microsoft\MBAM\NoStartupDelay
Specifically the StatusReportingFrequency
key.
Brandon
MDOP on the Springboard Series on TechNet

F.35 Credit Master Sheet - Last Payment Date

In the Credit Master Sheet there is a line item 'Last Payment' in the Credit Management Master Data section. Currently 'Last Payment' is pulling the entry date of the payment and not the posting date. When payments come in they are deposited that day. Our A/R clerks apply the cash in the system the next business day and have the posting date as the deposit date. Our Credit clerks do not care when it is entered, they need to see it by deposit/posting date.
I have tried to look into configuration to find out if this can be changed. I know the program is RFDKLI41, but I am unable to locate where it is getting the 'last payment' date from. Please advise.
Thank you.

dear, in F.35 there is an 'Output Lists' section - the "Layouts" button. did you try to config them ?
just in case try t-code F.31 - look at "Layouts" button as well - it has MORE config (8 layouts) than in F.35 (5 layouts)
regards,

Last payment date shown in credit master sheet is wrong.

Hi,
The last payment date and amount in the credit master sheet S_ALR_87012218 does not reflect the true last payment info. As per the payment history list, there have been more recent last payments after the last payment date shown on the credit master sheet, however i dont know why the actual last payment info is not being shown on the credit master sheet.
Can someone help?

Hi
When running credit master sheet make sure you are looking into correct credit control area where the payment has been entered. I am sure to update credit master sheet you do not need to run any program, this report updates figure online (at the same time). If you want to make sure its working take any customer having outstanding invoice on account. Make entry using transaction F-28, go back to credit mast sheet correct credti contrl area and you will be able to see updated amount.
I don`t know what t.code you are using to do incoming payment entery? Balance will not be updated properly in the reports if you are using wrong posting keys. Posting Key should be 15 inorder to update correct balance on customer report.
Hope this will help

PSA showing Request not updated to any data target using delta

Hi BWers,
I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
Requests for PSA /BIC/Bxxxx
I see the Request updated having a Red triangle with an exclamation mark in it and it says
"Request not updated to any data target using delta"
Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
Thanks for all your help.
Manish

Reg : Delta Load : Production Data
Current Scenario :
we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
Structure underlying infocube:
2 Data Sources >> 1DSO >>1 Infocube .
Usually the Data is loaded in delta format on daily basis using process chains.
For last one month the delta is not picking properly :
Example :
A WBS Element is created 2 years back and it open and getting its update into BW ,
latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
its showing this error:
Request not updated to any data target using delta,
i went and created DTP which didnt help much Because latest isnt caputered .
if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
how to over come this as this is a production issue
Obaid : pls help me on this issue , any others expert pls help

PI 7.1 - CPA Cache not updated with directory data.

Hi Gurus,
I have installed PI 7.1 and recently I refreshed my cache in partial and full mode. when I go to RWB->Cache monitoring -> Show Cache Status Table, I see following error for Central Adaptor engine.
<?xml version="1.0" encoding="ISO-8859-1"?>
<ConfirmationXML>
   <CacheRefreshError>
      <EngineType>
      AE
      </EngineType>
      <EngineName>
      af.sxd.mchir134
      </EngineName>
      <RefreshMode>
      C
      </RefreshMode>
      <GlobalError>
         <Message>
         CPA Cache not updated with directory data.
         </Message>
         <Trace>
         com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:191)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:440)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:491)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
     at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
     ... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
     ... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
     at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
     at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
     ... 11 more
         </Trace>
      </GlobalError>
      <GlobalError>
         <Message>
         Confirmation handling failed.
         </Message>
         <Trace>
         com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:162)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:462)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:603)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
     at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
     ... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
     ... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
     at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
     at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
     ... 11 more
         </Trace>
      </GlobalError>
   </CacheRefreshError>
</ConfirmationXML>
Please suggest the solution.
Thanks,
Surendra

Guys,
I have the same issue. Any help on this is appreciated!
Issue log from CPA cache refresh
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.sxd.pl1vw158</EngineName>
<RefreshMode>C</RefreshMode>
- <GlobalError>
<Message>CPA Cache not updated with directory data.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:195) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:448) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:457) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
- <GlobalError>
<Message>Confirmation handling failed.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:166) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:470) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:576) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
</CacheRefreshError>
Regards

How to find Last Payment date for vendor

Hi,
I am working on ALV Vendor report details.
1) How to find the last payment date for the vendor.
2) In input paramter field
    PARAMETERS: L_FILE LIKE RLGRAP-FILENAME.
   I want to validate the user input in the selction screen for downloading the file in the presentation server..
what is the validation I have to write for the path name.
pl help me give details.
Thanks in advance.
sharma

1) use table REGUH field ZALDT or VALUT
2) use fm like EPS_GET_FILE_ATTRIBUTES
A.

Invoice text(SGTXT) is not updating in payment proposal line items

Hi,
While doing payment proposal in F110, invoice text is not updating in payment proposal line items, which is available in ‘BSIK’ table.
Please find the attached screen shot. Please give me suggestions How to resolve this issue.

Hi,
The other line item accounts are revaluation accounts. So when there is no exchange rate, the amounts are zero.
Ezhil.

Sp L records are coming to the PSA and not updating in the data target

Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?

Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps...

Fi report to find last payment date

Hi guys
How can i find the last payment date of a customer.
Suppose a customer has a balance of 100 $ as of today and he clears an amount of 20 $ tomorrow so 21.10.2008 becomes his latest payment date, where will this be stored any idea?
Thanks

IN KNKK table there is a field CASHD & CASHA.check if this works.
otherwise do this,
there will be a doc type for customer payment (DZ or something)
give that doctype in BKPF and get the line items from BSEG and filter it based on customer number.
Sort the records based on the posting date descending.first record would give the last payment.

Customer's last payment date.

Hi everybody, I need to obtein the last payment date of a customer, somebody know if are there any function module or bapi that get that information? Regards.

Listo

Load status in PSA "Request not updated to any data target using delta"

Hi,
I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
There are lot of requests are there in PSA but some of them loaded with status
u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
Others u201CRequest not updated to any data target using deltau201D -- need to delete
We are deleting manually every week end.
Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
Thanks for your help in Advance,
Raj.

Hi Rajesh,
You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
Best Regards,
Bansi.

Master data loads Request not updated to any data target using delta

When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

Hi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM

Request not updated to any data target using delta

I am on BI 70 using 70 DataSource. I executed InfoPackage in full update, then ran DTP in full mode. There is only 1 data target. The requests were successfully updated in the target DSO. However, when I checked the datasource PSA, the requests were showing u201CRequest not updated to any data target using deltau201D with red triangle.
My questions are:
1. Is this normal?
2. I need to do more full loads. When I run DTP (in full mode) again, will it re-load those PSA requests (the ones already in DSO) to the same data target?
Thank you.
Rebecca

Hi Rebecca,
To answer your questions
1. Yes. This is normal.
2. Yes. When you run DTP in Full Mode again, this PSA request (along with any other subsequent loads you might have done to PSA) would be re-loaded to the same data target .
If this is not required you can set the DTP to delta mode. This ensures that the PSA request is updated to data target only once.
Hope this helps!
- Meera

Payment data from credit card to paypal

i want to change my payment data from credit card to paypal. in the FAQ it sais that this is possible for europe. how do i do that?

Hi there,
Payment method cannot be switched from credit card to PayPal in the current contract.
Please reach out to support here to cancel the current subscription and then purchase a new order with PayPal.
^Ani

F-21 is not updating last payment date in Credit management report

Similar Messages

Maybe you are looking for