F 2210 Printer quit and can't be fixed with Windows 7 Ultimate 64 bit

HP DeskJet F2210 with Windows 7 Ultimate 64 bit.
I have tried the Print Doctor to no avail.
I tried the driver remover program. It just says "not responding".
I tried the Printer remover program twice but the printer is still listed.
I tried the on line installation. It sits doing nothing for 12 hours.
I have tried the Print Manager to remove the drivers and it says it can not.
I have tried the Print Manager to remove the printer to no avail.
Trying to reinstall the drivers, it just stops and the window disappears after a few minutes.
BUT, hooking it up to my lap top with Windows Vista and it works.
What can I do other than replace it with a different brand?

Hello Den942, and welcome to the HP Forums.
I see you are having issues with the software on your Windows 7 machine. I would like to try and help you find a resolution.
I would suggest Uninstalling the Printer Software. If you run into any issues during the uninstall, I would suggest using the windows tool on how to Uninstall or change a program.
Once it is uninstalled, I would suggest putting the computer into clean boot mode within the Microsoft configuration. I am including a document on How to perform a clean boot in Windows.
Once the printer is in clean boot mode, I would use this link to ensure that you have the most up to date software when installing the HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Want to know if Internet Explorer 10 and 11 are they compatible with Windows Server 2008 32 bit?

Want to know if Internet Explorer 10 and 11 are they compatible with Windows Server 2008 32 bit?

Compare & contrast:
Internet Explorer 11 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-11-win-7
Internet Explorer 10 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-10-win-7
Internet Explorer 9 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-9
Neither IE11 nor IE10 is supported in Vista either.
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

Why does Firefox require a Plug In for Windows Media 11 and it doesn't exist for Windows 7 Ultimate 64 Bit

I wanted to listen to an Internet Radio Station and every time I clicked the listen now button on that site, Firefox tells me a Plug In is required for Window Media Player 11 so I follow the link to be told it is a manual download. When I get to the download site, I cannot find a Plug In download that is suitable to Windows 7 Ultimate 64 Bit so, I cannot listen to the radio station I want too and would like to know if there are any other options.

You can use the new WMP plugin for XP/Vista as well on Windows 7 with WMP 11.
See:
*[[Using the Windows Media Player plugin with Firefox]]
*http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin

HT3669 Canon laser printer LBP7750C and a Mac Book Air with OS X 1.8.4??

Hi! I have a Canon laser printer LBP7750C and a Mac Book Air with OS X 1.8.4, but I can't get it to function. After installning the printer, via Ethernet network (Apple Time Capsule) and IP-number, it seems to connects ok but can't print. Anyone has a solution or tip? Thanks!

One possible cause for your symptom is the printer driver you are using. If you have installed the Postscript (PS) driver but your LPB7750 does not have the PS kit installed, then this can stop a document from printing. So I would suggest you download and install the UFR2 v10.10 driver.
If you are using the UFR2 driver then the other cause for this symptom is the IP protocol. This driver and the PS driver must be configured using the LPD protocol. If you have selected IPP or HP Jetdirect when creating the print queue, then this will stop you from printing. So remove the printer from Print & Scan and add it again, this time selecting LPD for the protocol.
Another cause can be you have the wrong IP address. To check that the address is correct, type the IP address into a web browser. This will result in a connection to the internal web page of the printer if the IP address is correct.

Hi, I've recently bought an iPad2 and can't get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading. Apparently it is

Hi, I’ve recently bought an iPad2 and can’t get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading.
Apparently it is not an issue with wifi since Safari, You Tube and Maps work well, I’ve tried some of the tips, e.g. log off/on my Id, change password but no one worked.
Your help will be highly appreciated.
Thank you.
Luis.

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

I bought macbook pro at cash america used and loaded with windows 7 ultimate by boot camp.My questions is it has mountain lion loaded but original ower has name with password so how can I reload so I can sign on as administrator for downloads and upgrades

I bought a 13 inch macbook pro9.2 at Cash America with windows 7 Ultimate with boot camp program.
The Mac op sytem has Mountain Lion installed but the previous ower has his name and password attached to it and can only use as guest.
My question is how do I get around this to be administrator to reload software so i can use mountain Lion,and not loose the windows op .

If you reformat the partition that contain Mountain Lion and reinstall Mountain Lion, it should not effect the Windows pratition.
Have said that I suggest you backup everything you might want to save just in case.
Allan

My laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time.

My Dell laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time. When I hit sync is says it will erase my phone and sync with the new computer which is blank. How do I get my phone to sync my contacts, pics, apps etc. over to my new hard drive without losing anything.

Yes, so what's confusing... Did you not restore the backup of your data, contacts, pics, apps, music, etc. to the new hard drive after you replaced it or reformatted it or whatever you did? If so, then you can just sync your data back.
If not, please try searching the forum. This has been addressed hundreds of times here.

I have a 2009 macbook pro with os x10.9.2 and can't find drivers for windows

i have a 2009 macbook pro with os x10.9.2 and can't find drivers for windows. i trying to install windows using bootcamp but does not allows me to download the drivers..

From the system requirements page: http://support.apple.com/kb/HT5634 for your computer
MacBook Pro
(13-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, 2.53 GHz, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Early 2009)
4
4
DVD
DVD
DVD
The drivers are located on the OS DVD that came with your computer.

Can I partition my hard drive to hold Windows 8 (Beta), instead of Windows 7, and can I do this with an external CD drive?

I have a late 2008 Macbook Pro with Mac OS X 10.8 Mountain Lion installed, but my CD drive inside my computer is damaged*, and it's far cheaper to buy an external CD drive than to repair it entirely. Before I do either, I would like some grasp of whether or not it's worth my time and money, as I've yet to order the external drive or make a genius bar appointment.
Also, the reason I'm choosing Windows 8 (Beta) is because it's free.
*I dropped my computer once two years ago. I haven't even used my CD drive until recently when trying to install Windows 8. I assume the drop was the issue. I've used compressed air to remove dirt/dust as well as resetting the PRAM multiple times and nothing seems to work, but I'm not worried about it.
Thank you.

Can I partition my hard drive to hold Windows 8 (Beta), instead of Windows 7, and can I do this with an external CD drive?
No and No.
1: Apple only supports Windows 7 at this time in BootCamp (direct install into a bootable partition) because Win 8 is in Beta and no Mac hardware drivers are available yet from Apple for Windows 8.
2: You can't install Windows from a external cd drive into BootCamp, it has to be a internal one far as I know, perhaps a USB will work I don't know.
Yes:
1: You can download and install Windows 8 Beta into a the free virtual machine software called VirtualBox, which Windows 8 will run in a window in OS X. This is better as it's still in Beta and Windows Beta releases will expire. Plus Windows 8 is a pain in the behind and you will want to be able to have VirtualBox or OS X be able to regain control over the computer.
http://osxdaily.com/2012/03/03/try-windows-8-consumer-preview-virtualbox/
Windows in BootCamp or Virtual Machine?

Can't print/save PDF with Pagemaker 7, Windows 7 Ultimate, 32 bit, Mozilla Firefox, NitroPro 5

Pagemaker 7, Windows 7 Ultimate, 32 bit, Mozilla Firefox, NitroPro 5
Installation of nitro seems to be o.k. Maybe i have the settings wrong in Nitro?
When i go to print in PM7 i am asked to Save and then get an error message from PM7 "General printer failure".
In PM 7 there are several options and i undoubtedly have one of them wrong. When choosing Nitro as the Printer
then i must select a PPD. There are 3 PPD choices and i have tried all of them:
Color General Adobe PDF 3015.102 General
Tried using the standard Print and the Export options but it was no go. So i've downloaded NitroPro and it appears
as a printer option in PM7 but neither does it work.
Aint desktop publishing fun, tho!!!!

Yes it's fun but not when you use Pagemaker on a completely unsupported
system. Either find yourself an old WinXP box or move to a new application.
If InDesign isn't your cup of tea, check out Scribus or Serif Page Plus.

HT204053 hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

I'm getting the following error message when attempting to invoke "Find My Mac"
Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

You have no recovery partition. This is a normal condition if your boot volume is a software RAID, or if you modified the partition table after running Boot Camp Assistant to create a Windows partition. Otherwise, you need to reinstall OS X in order to add a recovery partition.
If you don't have a current backup, you need to back up before you do anything else.
You have several options for reinstalling.
1. If you have access to a local, unencrypted Time Machine backup volume, and if that volume has a backup of a Mac (not necessarily this one) that was running the same major version of OS X and did have a Recovery partition, then you can boot from the Time Machine volume into Recovery by holding down the option key at the startup chime. Encrypted Time Machine volumes are not bootable, nor are network backups.
2. If your Mac shipped with OS X 10.7 or later preinstalled, or if it's one of the computers that can be upgraded to use OS X Internet Recovery, you may be able to netboot from an Apple server by holding down the key combination option-R at the startup chime. Release the keys when you see a spinning globe.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
3. Use Recovery Disk Assistant (RDA) on another Mac running the same major version of OS X as yours to create a bootable USB device. Boot your Mac from the device by holding down the option key at startup.Warning: All existing data on the USB device will be erased when you use RDA.
Once you've booted into Recovery, the OS X Utilities screen will appear. Follow the prompts to reinstall OS X. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
If none of the above choices is open to you, then you'll have to start over from an OS X 10.6.8 installation. There's no need to overwrite your existing boot volume; you can use an external drive. Install 10.6 from the DVD you originally used to upgrade, or that came with the machine. Run Software Update and install all available updates. Log into the App Store with the Apple ID you used to buy 10.7 or later, and download the installer. When you run it, be sure to choose the right drive to install on.

TS3406 I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

YOu will need to contact your cell phone provider to resolve those issue, those are carrier features.

When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

F 2210 Printer quit and can't be fixed with Windows 7 Ultimate 64 bit

Similar Messages

Maybe you are looking for