F.27 List of customers that received the statement
Hello Guys,
I ran F.27 and as a results more than 1000 statements were sent.
I´d like to know if is there a way to know the name/number of all customers that received the statement.
Is it possible to get a list of all names?
Thanks
Rafael
Hi,
How where the statesments sent? If you send the statements via email in the log you have the list of email adress. And you have the output in tcodes SOST and SOSB.
Regards,
Eduardo
Similar Messages
-
ok i have been trying to download albums, songs, apps, etc. and my itunes keeps asking me for the security question and for the life of me i cant remember the answers. I dont know what the email is that receives the question reset. is there anything i can do to fix this or am i screwed?
If you have music that was purchased on different iTunes accounts than the one you use, then you must provide the password, otherwise the tunes are not considered yours. You can turn off iCloud and just use the usual USB sync method. But I wonder whether you'll have the same problem?
-
Need The name of machines that received the advertisement
I am using SCCM 2007 to push a program. In the advertisement status I can find the number of machines that received the advertisement and ran the program successfully.
I need to know the names of these machines if possible
ThanksIf you are looking at only specific states, you cna use the built-in report for
"All system resources for a specific advertisement in a specific state"
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway -
Is used by m ac os x and cannot be opened that is the statement, Itunes music
the music on itunes i was transfering the music to a usb so i can play it on my t.v. and that was the statement is used by mac o s x and cannot be opened. and the byte is zero now. what do i do to change it back to normal
forget it, i paid someone that knew a mac 10.4.1 change it to 10.5.8 and he add all that i was complaining about that my use mac is no good, i paid 80 on all the computer that he added. I wanted to upgrade but i found out that 105.8 on a power pc that's it. nomore upgrade. thanks for everything.
-
My Ipod is not working, It was working find and suddenly it does not turn on anymore. It does not responde when it is plugged in. I can see it is not the first case, somebody has received an answer that works? Some similarities in the ipods? thanks for your help.
Have you tried a reset?
iPod touch User Guide (For iOS 4.3 Software) -
I accidentally removed all sites in the tools->options->content->load all images automatically.
I need to know what the names of these sites are and how to get them all blocked again all at once.
== This happened ==
Just once or twice
== when i accidentally removed all sites from the listThere's no way to recover this list if you deleted the items, as it's not backed up.
Why did you have the sites blocked in the first place? You can simply re-block the sites as you see the images in order to re-build your list. -
I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??
I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.
-
I can't receive the body of the message! Please, help
Hi!
I've got a problem... When I want to send an email, I use the method that is listed bellow. I receive the email, with the subject, "from" and "to", but I never get the Message!!! Does anybody know what is going on??? Please help!!! This is highly URGENT!!!
public static void sendSmtpMail(String from, String to,String smtpClient, String subject, String msg)
try
SmtpClient client = new SmtpClient(smtpClient); // Ex.: "mail.calegari.net"
client.from(from);
client.to(to);
PrintStream message = client.startMessage();
message.println("From: " + from);
message.println("To: " + to);
message.println("Subject: "+subject);
message.println(msg);
client.closeServer();
catch (IOException e)
System.out.println("ERROR SENDING EMAIL:"+e);
Thanks too much!
CalegariI've got a problem... When I want to send an email, I
use the method that is listed bellow. I receive the
email, with the subject, "from" and "to", but I never
get the Message!!!I think, you missed to use a FetchProfile to get the message data. Look into the API for FetchProfile, there you'll find something like FetchProfile.CONTENT, IIRC.
It's because you have to download the data for each message seperatly, the body is not fetched automatical. Automatic fetching all data will result in a performance loss, if you only want to show the From: and Subject: headers.
Remember, this is all from memory and I'm not an expert in javamail. Take a deep look into the API. -
How Do You Set the State Of a Custom Compent's Child Custom Compent?
I'm starting to build very complex interface 'widgets' built by taking simple custom compents and creating more complex custom compents from these compents and then again grouping those to create custom components. However, I'm starting to lose access in Catalyst to set these sub custom compents. It maybe just a noob issue.
Am I looking at this wrong?
Should I not be nesting compents?
Other wise how do I access these?
I haven't jumped into the code part of FLEX yet but I figured it would be very OOP like, so... (psuedo code)
myParentCustomComponent.my1stChild.state = myChildsStateOn;
//( myChildsStateOn, myChildsStateOff, myChildsStateNotVisited )
myParentCustomComponent.my2ndChild.state = myChildsStateOn;
//( myChildsStateOn, myChildsStateOff, myChildsStateNotVisited )
I hope I can set this in Catalyst so that I don't have to do a shallow and very wide state setup like ... (psuedo code)
myCustomCompent.state = my1stChildIsOn;
myCustomCompent.state = my1stChildIsOff;
myCustomCompent.state = my1stChildIsNotVisited;
myCustomCompent.state = my2ndChildIsOn;
myCustomCompent.state = my2ndChildIsOff;
myCustomCompent.state = my2ndChildIsNotVisted;
PLEASE ADVISE, thank you.
Best Regards,
-TruceHi Truce,
Thank you for your feedback. You have run into a current limitation with the "play transition to state" interaction and the "Set Component State" action in the timeline. Currently the UI that allows you to pick a state only "sees" components that are direct children of your current context. The state picker doesn't allow picking states of components that are more deeply nested.
We are aware of this issue and how it impacts user's ability to author more complex projects, so we are looking at ways to allow users to pick states deeper within the hierachy when creating interactions.
One work around that works in *some* cases is to set the state of sub components in a parent component using the PI rather than using interactions.
If you have a structure like this
Application
WidgetA (with state1 and state2)
WidgetB (with state1 and state2)
WidgetC (with state1 and state2)
You can record what state WidgetB and WidgetC are in for each state of WidgetA. To do this double-click WidgetA, select WidgetB and change the current state in the properties editor for WidgetB. That state will be remember for each state of Widget A. Then when you have an interaction at the application level that changes the state of WidgetA, then WidgetB will change state as well. This works well if WidgetB is in the same state for each state of WidgetA. If you want to change WidgetB and WidgetC states directly from the Application level, there isn't currently a way to do this.
- Ty -
Looking for a bapi that gets the list of customers with a credit limit
Hello SAP gurus
I want to know if there is a standard bapi that I can use to find all customers with a credit limit of $10000 and that have exceeded this limit.
Any response/feedback will be highly appreciated.
Tks
RamThanks J@Y,
I had read that discussion about the tables with the info. However, I have an external program that is integrated to SAP sytem (using webservices). The external program when needed has to retrieve the list of customers who have exceeded certain credit limit. So I was wondering if there is any standard BAPI which I can use. Or do I need to write my own BAPI using the tables info that you have indicated.
Tks
Ram -
When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it.
In addition, when I connect my nano, my computer does recognize but the library and playlists in my Itunes is not the same as the library/playlists on my ipod (on this ipod). If I purchase new songs from itunes, they go to the library on the computer but I cant get them to the ipod playlist.bump, I have same issue. thanks, MM
-
I'm having some difficulty with transferring images from a UDP Client to a UDP Server. The issue is receiving the bytes necessary to update an original image sent from the Client to the Server and updating the Servers List(Of Byte) with the
new bytes replacing bytes in that list. This is a simplex connection where the Sever receives and the Client sends to utilize the least amount of bandwidth for a "Remote Desktop" style application where the Server side needs image updates of whatever
occurs on the Client desktop.
So far I can tranfer images with no issue. The images can be be any image type (.Bmp, .Gif, .JPeg, .Png, etc). I was working with sending .JPeg's as they appear to be the smallest size image when a Bitmap is saved to a memory stream as type
.JPeg. And then I am using GZip to compress that byte array again so it is much smaller. However on a loopback on my NIC the speed for sending a full size screen capture is not very fast as the Server updates fairly slowly unless the Clients screen capture
Bitmap is reduced in size to about 1/3'd of the original size. Then about 12000 bytes or less are sent for each update.
Due to .JPeg compression I suppose there is no way to get the difference in bytes between two .JPegs and only send those when something occurs on the desktop that alters the desktop screen capture image. Therefore I went to using .Bmp's as each
.Bmp contains the same number of bytes in its array regardless of the image alterations on the desktop. So I suppose the difference in bytes from a second screen capture and an inital screen capture are what is different in the second image from the initial
image.
What I have done so far is save an initial Bitmap of a screen capture using a memory stream and saving as type .Bmp which takes less than 93 milliseconds for 4196406 bytes. Compressing that takes less than 118 milliseconds to 197325 bytes for
the current windows on the desktop. When that is done PictureBox1 is updated from nothing to the captured image as the PictureBox's background image with image layout zoom and the PictureBox sized at 1/2 my screens width and 1/2 my screens height.
Then I save a new Bitmap the same way which now contains different image information as the PictureBox is now displaying an image so its back color is no longer displayed (solid color Aqua) and the cursor has moved to a different location. The
second Bitmap is also 4196406 in bytes and compressed it was 315473 bytes in size.
I also just found code from this link Converting a Bitmap to a Byte Array (and Byte Array to Bitmap) which gets a byte array
directly from a Bitmap and the size of that is 3148800 for whatever is full screen captured on my laptop. So I should be able to work with smaller byte arrays at some point.
The issue I'm having is that once the Client sends an image of the desktop to the Server I only want to update the server with any differences occuring on the Clients desktop. So what I have done is compare the first screen captures bytes (stored
in a List(Of Byte)) to the second screen captures bytes (stored in a List(Of Byte)) by using a For/Next for 0 to 4196405 where if a byte in the first screen captures List is not equal to a byte in the second screen captures List I add the index and byte of
the second screen captures list to a Dictionary(Of Integer, Byte). The Dictionary then only contains the indexes and bytes that are different between the first screen capture and second screen capture. This takes about 125 milliseconds which I think is pretty
fast for 4196406 byte comparison using a For/Next and adding all the different bytes and indexes for each byte to a Dictionary.
The difference in Bytes between the inital screen capture and the second screen capture is 242587 as an example which changes of course. For that amount of bytes the Dictionary contains 242587 integers as indexes and 242587 bytes as different
bytes totaling 485174 bytes for both arrays (keys, values). Compressed the indexes go from 242587 to 43489 bytes and the values go from 242587 to 34982 bytes. Which means I will have to send 78, 481 bytes from the Client to the Server to update the display
on the server. Quite smaller than the original 4196406 bytes of the second Bitmap saved to type .Bmp or the compressed size of that array which was 315473 bytes. Plus a few bytes I add as overhead so the server knows when an image array ends and how many packets
were sent for the array so it can discard complete arrays if necessary since UDP is lossfull although probably not so much in current networks like it may originally have been when the internet started.
In reality the data from the Client to the Server will mostly be the cursor as it moves and updating the Server image with only a few hundred bytes I would imagine at a time. Or when the cursor selects a Button for example and the Buttons
color changes causing those differences in the original screen capture.
But the problem is if I send the Dictionaries Indexes and Bytes to the Server then I need to update the original Bitmap List(Of Byte) on the server by removing the Bytes in the received informations Index locations array from the Servers Bitmap
List(Of Byte) and replacing those Bytes with the Bytes in the received informations Byte array. This takes so long using a For/Next for however many indexes are in the received informations Index array to update the Bitmap List(Of Byte) on the server using
"Bmp1Bytes.RemoveAt(Index As Integer)" followed by "Bmp1Bytes.Insert(Index As Integer, Item As Byte)" in the For/Next.
I've tried various For/Next statements including using a new List(Of Byte) with If statements so If the the integer for the For/Next ='s the Key in a Dictionary(Of Integer, Byte) using a Counter to provide the Dictionaries Key value then
the Dictionaries byte value will be added to the List(Of Byte) and the counter will increas by one Else the List(Of Byte) adds the original "Bmp1Bytes" byte at that index to the new List(Of Byte). This takes forever also.
I also tried the same For/Next adding to a new Dictionary(Of Integer, Byte) but that takes forever too.
I think I could use RemoveRange and AddRange to speed things up. But I don't know how to retrieve a contiguous range of indexes in the received indexes that need to be updated in the servers "Bmp1Bytes" List(Of Byte) from the received
array of indexes and bytes which are in a Dictionary(Of Integer, Byte). But I believe this would even be slower than some realistic method for replacing all Bytes in a List(Of Byte) when I have the indexes that need to be replaced and the bytes to replace
them with.
Even if I just used AddRange on a new List(Of Byte) to add ranges of bytes from the original "Bmp1Bytes" and the changes from the Dictionary(Of Integer, Byte) I think this would be rather slow. Although I don't know how to do that
by getting contiguous ranges of indexes from the Dictionaries keys.
So I was wondering if there is some method perhaps using Linq or IEnumerable which I've been unable to figure anything out which could do this.
I do have some copy and pasted code which I don't understand how it works that I am using which I would guess could be altered for doing something like this but I can't find information that provides how the code works. Or even if I did
maybe I can't understand it. Like the code below which is extremely fast.
Dim strArray() As String = Array.ConvertAll(Of Integer, String)(BmpComparisonDict.Keys.ToArray, Function(x) x.ToString())
La vida locaMonkeyboy,
That was quite a bit to read, but still a bit unclear. Could you put a specific list of goals/questions, asked in the smallest possible form?
It seems like either you're making a program that monitors activity on your computer, or you're writing some kind of remote pc app.
When you do get your bytes from using lockbits, keep in mind all the files header info would be lost. I think retaining the header info is worth the extra bytes.
The other, thing: I'm not sure if you're taking 32bpp screen shots, but also keep in mind that the "whole desktop" is the final destination for blended graphics, if that makes sense. What I mean is that there is no need to capture an "alpha"
channel for a desktop screenshot, as alpha would always be 255, this could save you 1 byte per pixel captured... Theres nothing "behind" the desktop, therefore no alpha, and every window shown above the desktop is already blended. I suggest using
24Bpp for a full screen capture.
Your X,Y information for the mouse could be stored as UINT16, this would save you a measly 2 bytes per location update/save.
When you update your byte arrays, maybe you can turn the array into a stream and write to whatever index, however many bytes, that should prevent a "Shift" of bytes, and instead overwrite any bytes that "get in the way".
ex
Dim example As String = "This is an example."
Dim insertString As String = "was"
Dim insertBytes As Byte() = System.Text.Encoding.ASCII.GetBytes(insertString)
Dim bytes As Byte() = System.Text.Encoding.ASCII.GetBytes(example)
Dim modifiedBytes As Byte() = {}
Using ms As New System.IO.MemoryStream(bytes)
ms.Position = 5
ms.Write(insertBytes, 0, 3)
modifiedBytes = ms.ToArray
End Using
Dim newString As String = System.Text.Encoding.ASCII.GetString(modifiedBytes)
'Notice how below there isn't the word "is" anymore, and that there isn't a
'space.
'This demonstrates that you overwrite existing data, versus shifting everything to
'the right.
'Returns: This wasan example.
MsgBox(newString)
“If you want something you've never had, you need to do something you've never done.”
Don't forget to mark
helpful posts and answers
! Answer an interesting question? Write a
new article
about it! My Articles
*This post does not reflect the opinion of Microsoft, or its employees.
Well it's too much to read. I was really tired when I wrote it. Even the below is too much to read but perhaps gets the point across of what I would like to do which I think
Joel Engineer may have answered but I'm not sure. As I'm still too tired to understand that yet and research what he said in order to figure it out yet.
But maybe the code below can provide the concept of the operation with the comments in it. But seeing as how I'm still tired it may be confused.
Option Strict On
Imports System.Windows.Forms
Imports System.IO
Imports System.IO.Compression
Imports System.Drawing.Imaging
Imports System.Runtime.InteropServices
Public Class Form1
Dim Bmp1Bytes As New List(Of Byte)
Dim Bmp1BytesCompressed As New List(Of Byte)
Dim Bmp2Bytes As New List(Of Byte)
Dim BmpComparisonDict As New Dictionary(Of Integer, Byte)
Dim BmpDifferenceIndexesCompressed As New List(Of Byte)
Dim BmpDifferenceBytesCompressed As New List(Of Byte)
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
SomeSub()
End Sub
Private Sub SomeSub()
' Pretend this code is in UDP Client app. A screen capture is performed of the desktop. Takes about 90 milliseconds.
Bmp1Bytes.Clear()
Using BMP1 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP1)
g1.CopyFromScreen(0, 0, 0, 0, BMP1.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP1.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp1Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
Bmp1BytesCompressed.AddRange(Compress(Bmp1Bytes.ToArray))
' UDP Client app sends Bmp1BytesCompressed.ToArray to UDP Server which is the entire image of the desktop that the UDP
' Client is on. This image takes awhile to send since compressed it is about 177000 bytes from over 4000000 bytes.
' I will be using different code just to get the bytes from the actual Bitmap in the future. That is not important for now.
' Pretend the UDP Server has received the bytes, decompressed the array received into a List(Of Byte) and is displaying
' the image of the UDP Clients desktop in a PictureBox.
' Now the image on the UDP Clients desktop changes due to the mouse cursor moving as an example. Therefore a new Bitmap
' is created from a screen capture. This takes about 90 milliseconds.
Bmp2Bytes.Clear()
Using BMP2 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP2)
g1.CopyFromScreen(0, 0, 0, 0, BMP2.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP2.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp2Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
' Now I have the original images bytes in Bmp1Bytes and the new images bytes in Bmp2Bytes on the UDP Client. But I don't
' want to send all of the bytes in Bmp2Bytes to the UDP Server. Just the indexes of and the bytes that are different in
' Bmp2Bytes from Bmp1Bytes.
' This takes less than 100 milliseconds for what I've tested so far where over 500000 bytes in Bmp2Bytes are different
' than the bytes in Bmp1Bytes. Usually that amount would be much less. But during testing I was displaying the image
' from Bmp1 bytes in a PictureBox so a large amount of data would change between the first screen shot, the PictureBox
' then displaying an image on the same PC and then the second screen shot.
BmpComparisonDict.Clear()
For i = 0 To Bmp1Bytes.Count - 1
If Bmp1Bytes(i) <> Bmp2Bytes(i) Then
BmpComparisonDict.Add(i, Bmp2Bytes(i))
End If
Next
' So now I have all the difference bytes and their indexes from Bmp2Bytes in the BmpComparisonDict. So I compress
' the indexes into on List and the Bytes into another List.
BmpDifferenceIndexesCompressed.Clear()
BmpDifferenceBytesCompressed.Clear()
BmpDifferenceIndexesCompressed.AddRange(Compress(BmpComparisonDict.Keys.SelectMany(Function(d) BitConverter.GetBytes(d)).ToArray()))
BmpDifferenceBytesCompressed.AddRange(Compress(BmpComparisonDict.Values.ToArray))
' Now pretend the UDP Client has sent both those arrays to the UDP Server which has added both decompressed arrays
' to a Dictionary(Of Integer, Byte). And the server has the original image decompressed bytes received in a List
' called Bmp1Bytes also.
' This is where I am stuck. The UDP Server has the Dictionary. That part was fast. However there is no
' fast method I have found for creating a new List(Of Byte) where bytes in the originally received List(Of Byte) that
' do not have to be altered are placed into a new List(Of Byte) except for the indexes listed in the
' Dictionary(Of Integer, Byte) that need to be placed into the appropriate index locations of the new List(Of Byte).
' The below example for doing so is exceptionally slow. Pretend UpdateDictionary has all of the decompressed indexes
' and bytes received by the UDP Server for the update contained within it.
Dim UpdateDictionary As New Dictionary(Of Integer, Byte)
Dim UpdatedBytes As New List(Of Byte)
Dim Counter As Integer = 0
For i = 0 To Bmp1Bytes.Count - 1
If i = UpdateDictionary.Keys(Counter) Then ' Provides the index contained in the Keys for the Dictionary
UpdatedBytes.Add(UpdateDictionary.Values(Counter))
Counter += 1
If Counter > UpdateDictionary.Count - 1 Then Counter = 0
Else
UpdatedBytes.Add(Bmp1Bytes(i))
End If
Next
' So what I'm trying to do is find an extremely fast method for performing something similar to what the
' above operation performs.
End Sub
Private Function Compress(BytesToCompress() As Byte) As List(Of Byte)
Dim BytesCompressed As New List(Of Byte)
Using compressedStream = New MemoryStream()
Using zipStream = New GZipStream(compressedStream, CompressionMode.Compress)
zipStream.Write(BytesToCompress, 0, BytesToCompress.Count)
zipStream.Close()
BytesCompressed.AddRange(compressedStream.ToArray)
End Using
End Using
Return BytesCompressed
End Function
Private Function Decompress(BytesToDecompress() As Byte) As List(Of Byte)
Dim BytesDecompressed As New List(Of Byte)
Using DecompressedStream = New MemoryStream()
Using zipStream = New GZipStream(DecompressedStream, CompressionMode.Decompress)
zipStream.Write(BytesToDecompress, 0, BytesToDecompress.Count)
zipStream.Close()
BytesDecompressed.AddRange(DecompressedStream.ToArray)
End Using
End Using
Return BytesDecompressed
End Function
End Class
La vida loca -
I have two Macbooks that are connected to the same Comcast Wi-Fi network modem. One of the computers has become very sporadic in receiving the WI-FI signal while the other is unaffected. Both have same operating system (10.5.8). I have restarted computer, and unplugged and retarted modem on several occassions to no avail--one still works the other inconsistent. Have spent a great deal of phone time with Comcast and they suggest acquiring latest OS. Does anyone know a solution to this problem?
This does not sound to be a router problem...You should try to uninstall and re-install the ethernet adapter/card installed in your computer...Do you have 2 Ethernet Adapter's by any chance...Check the Device Manager, Click on the Start button >>> Settings >>> Control Panel >>> Double click System, go to Hardware >>> Device manager, click on the plus'+' sign next to Network Adapters and see how many Ethernet Adapters are listed...
Also connect that computer straight to your modem and see check if you get the same message,that 'YOU ARE CONNECTED TO MORE THAN ONE NETWORK'... -
Hi, I want to know which devices (iMac, MacBook, iPod, iPhone, iPad & PC) are using my iCloud account, specifically because of iMessage going to devices that im not aware of.
A list of those devices would be great.
I do have a list of the ones with find my i activated, but i want the full list. Or at least the ones being used by FaceTime or iMessage!
Thank you in advance!I don't think there's a single place that will give you a list but you can check your devices to create one. On your iOS devices go to Settings>Messages>Receive At and check the Apple ID at the top. You can check FaceTime at Settings>FaceTime. You can check iCloud at Settings>iCloud>Account. On your Mac go to System Preferences>iCloud> click on Account Details. On your PC go to Start>Control Panel>Network and Internet>iCloud (you Apple ID is listed on the left).
-
i clicked the download all button at the end of the list of my library iTunes which i believe is in the iCloud, i have iTunes match also, many downloads were reported as occurring over several hours and then received the warning startup disc is full (activity monitor shows 3.99 of 4 GB used) and then another stating the download had not occurred due to the disc being full. most of the tunes still appear to be in the cloud but the disc is said to be full, spent a good period of time trying to investigate what has happened but failed...I'm not well up on all of this as an old chap so any help would be wonderful.....
unclefossil wrote:
Thanks Michael, what is the best way of backing up, should buy a cheap standalone external hard drive rather than relying on the Time Capsule which is quite sensitive...
If you read the link I provided you'll get an idea of one way to maintain a backup of your music files, use Time Machine, and not take up as much room on the internal HDD/SSD.
unclefossil wrote:
i live in the Scottish Highlands where Broadband is frequently intermittent disrupting backups.
Your internet connection speed has no effect on Time Machine/Time Capsule backups. Since that is all done locally, over your wireless network you actually do not need an internet connection at all.
unclefossil wrote:
Also I wondered if I could increase the memory on the setup disk by replacing the 4GB card already in the MBP with 16GB cards, if I upgraded would that affect anything I have stored already like my iTunes?
You're asking about the computer's RAM. Increasing that will not increase the size of the internal storage available to the computer. You'd need to replace the HDD/SSD of the Mac, which, depending on what model you have may or may not be possible (with new models of Macs).
Maybe you are looking for
-
Problem with ENCTYPE='multipart/form-data'
In my program I want to upload a file along with other details. I've dowloaded org.apache.commons.fileupload.* jar files and everything works fine only if I give <INPUT TYPE='file' NAME='file1'> i.e the file is uploaded But if I add any other field i
-
An example would be Jackson Browne's "The Load Out" &" Stay".They should play one after the other but in a play list on shuffle setting they don't. How do I combine two songs so they play as one in a shuffled playlist
-
If you need help with CPS and Contribute
After over a month of contacting support, I have come to the conclusion that Adobe does not offer advance support for CPS. The only thing that the low level tech support agents are capable of doing is 1. transferring you to someone else, 2. Sending y
-
Can Coldfusion 9 and PHP 5.1 coexist on the same server?
I found a analytics tool that I want to use for my companies intranet, and it requires PHP 5.1 to be installed on the server. This server will also have CF 9 on it as well. Will PHP 5.1 interfere with the web site and applications on the server writt
-
Resizing Image Window in Photoshop using Javascript
I write many scripts using the ScriptListener as my base for obtaining my scripts. One of the steps I need is to resize the Image window so I can properly place a logo on an image. When I resize the image using File>Automate>Fit Image. The Image Wind