F.28 Failing to reset Credt Control Area data

My client has recently moved from a static credit check to a dyanmic credit check in line with a changing business model.
I have found that after making the required config changes and executing F.28 in the backgroup for the CCA and the cusotmer based FD32 / FD33 still reports that the CCA needs to be reset.
I have also tested running for a single account, confirmed the event log as green once the program run and still receive a message stating that the credit master needs to be reset when running FD32 / FD33.
Has anyone else encountered this or aware of a solution?
Regards

Dear,
Whenever we change any important settings related to credit management, SAP recommends to run the
reorganization programs.
Kindly run the credit reorganization reports and check again.
The reports available are
RVKRED77 - Reorganize SD Credit Data
Reorganizes open credit, delivery and billing values. It can be used in the event of an update error, for example.
RVKRED88 -     
Simulating Reorganization of SD Credit Data
To run a report:
SE38 and enter the program name and execute.
Thanks & Regards,
Hegal

Similar Messages

  • Failed to handle capwap control message from controller

    Hello,
    I am struggling in associating a 1242 AP's with WLC's.
    Show version of the AP:
    Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(25e)JAM2, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Mon 29-Jul-13 11:32 by prod_rel_team
    ROM: Bootstrap program is C1240 boot loader
    BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)
    AP0019.56b0.855e uptime is 9 minutes
    System returned to ROM by power-on
    System image file is "flash:/c1240-k9w8-mx.124-25e.JAM2/c1240-k9w8-mx.124-25e.JAM2"
    Show inventory of the AP:
    AME: "AP1240", DESCR: "Cisco Aironet 1240 Series (IEEE 802.11a/g) Access Point"
    PID: AIR-LAP1242AG-E-K9, VID: V01, SN: FCZ10408384
    When trying to attach it to a WLC 5508 running 6.0.199.4, the AP keeps on downloading image and power cycling.
    When trying to attach it to a WLC 5508 running 7.4.110.0, the AP shows the following message :
    Jan 30 08:24:56.372: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
    *Jan 30 08:24:56.373: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.71.142.7:5246
    *Jan 30 08:24:56.427: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Jan 30 08:24:56.447: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:56.484: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Jan 30 08:24:57.445: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:57.473: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jan 30 08:24:57.478: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jan 30 08:24:58.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Jan 30 08:24:58.473: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jan 30 08:24:58.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:58.508: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:58.513: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Jan 30 08:24:59.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:59.508: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:59.532: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Jan 30 08:25:00.532: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Jan 30 08:25:06.483: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Jan 30 08:25:07.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.71.142.7 peer_port: 5246
    *Jan 30 08:25:08.565: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.71.142.7 peer_port: 5246
    *Jan 30 08:25:08.567: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
    *Jan 30 08:25:08.598: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.71.142.7 Jan 30 08:24:56.372: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
    *Jan 30 08:24:56.373: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.71.142.7:5246
    *Jan 30 08:24:56.427: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Jan 30 08:24:56.447: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:56.484: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Jan 30 08:24:57.445: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:57.473: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jan 30 08:24:57.478: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jan 30 08:24:58.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Jan 30 08:24:58.473: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jan 30 08:24:58.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:58.508: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:58.513: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Jan 30 08:24:59.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:59.508: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:59.532: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Jan 30 08:25:00.532: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Jan 30 08:25:06.483: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Jan 30 08:25:07.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.71.142.7 peer_port: 5246
    *Jan 30 08:25:08.565: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.71.142.7 peer_port: 5246
    *Jan 30 08:25:08.567: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
    *Jan 30 08:25:08.598: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.71.142.7
    Any idea ?
    Many thanks !

    here is the debug output:
    login as: groupwls
    (Cisco Controller)
    User: groupwls
    Password:************
    Your password does not meet the strong password requirements.For added security,                                                                              set a new password that meets these requirements. To prevent this message from                                                                              showing again, disable the strong password feature.
    (Cisco Controller) >debug pm pki enable
    (Cisco Controller) >debug capwap events enable
    (Cisco Controller) >*spamApTask2: Jan 30 09:46:38.639: 00:19:07:c6:39:60 DTLS connection not found, creating new connection for 10:64:94:52 (2134) 10:71:142:8 (5246)
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: called to evaluate
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCertFromCID: called to get cert for CID 155224fa
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 2, certname >cscoDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: called to evaluate
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: called to get key for CID 155224fa
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 1, certname >bsnDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 2, certname >cscoDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: match in row 2
    *spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: locking ca cert table
    *spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: calling x509_alloc() for user cert
    *spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: calling x509_decode()
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: C=US, ST=California, L=San Jose, O=Cisco Systems, CN=C1240-001956b0855e, [email protected]
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles:   O=Cisco Systems, CN=Cisco Manufacturing CA
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Mac Address in subject is 00:19:56:b0:85:5e
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Cert Name in subject is C1240-001956b0855e
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Cert is issued by Cisco Systems.
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: called to evaluate
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: called to get cert for CID 2f6d981f
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.887: ssphmUserCertVerify: calling x509_decode()
    *spamApTask2: Jan 30 09:46:38.898: ssphmUserCertVerify: user cert verfied using >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (current): 2014/01/30/09:46:38
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (NotBefore): 2006/10/05/13:05:43
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (NotAfter): 2016/10/05/13:15:43
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: getting cisco ID cert handle...
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: called to evaluate
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.906: sshpmFreePublicKeyHandle: called with 0x2c058e50
    *spamApTask2: Jan 30 09:46:38.906: sshpmFreePublicKeyHandle: freeing public key
    *spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 Allocated index from main list, Index: 312
    *spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 DTLS keys for Control Plane are plumbed successfully for AP 10.64.94.52. Index 313
    *spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 DTLS Session established server (10.71.142.8:5246), client (10.64.94.52:2134)
    *spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 Starting wait join timer for AP: 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:40.199: 00:19:07:c6:39:60 Join Request from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:40.200: 00:19:07:c6:39:60 Deleting AP entry 10.64.94.52:2134 from temporary database.
    *spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join Version: = 117730816
    *spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join resp: CAPWAP Maximum Msg element len = 87
    *spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join Response sent to 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 CAPWAP State: Join
    *spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 capwap_ac_platform.c:1225 - Operation State 0 ===> 4
    *apfReceiveTask: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Register LWAPP event for AP 00:19:07:c6:39:60 slot 0
    *apfReceiveTask: Jan 30 09:46:40.201: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.202:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *apfReceiveTask: Jan 30 09:46:40.202: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.202:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *apfReceiveTask: Jan 30 09:46:40.202: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.202:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *apfReceiveTask: Jan 30 09:46:40.203: 00:19:07:c6:39:60 Register LWAPP event for AP 00:19:07:c6:39:60 slot 1
    *apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.203:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.203:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.203:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *spamApTask2: Jan 30 09:46:41.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:41.023: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:44.029: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:47.022: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:50.022: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:53.022: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:56.022: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:59.019: 00:19:07:c6:39:60 DTLS keys for Control Plane deleted successfully for AP 10.64.94.52
    *spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 DTLS connection closed event receivedserver (10:71:142:8/5246) client (10:64:94:52/2134)
    *spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 Entry exists for AP (10:64:94:52/2134)
    *spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 0
    *apfReceiveTask: Jan 30 09:46:59.026: 00:19:07:c6:39:60 Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 0
    *spamApTask2: Jan 30 09:46:59.027: 00:19:07:c6:39:60 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 1
    *apfReceiveTask: Jan 30 09:46:59.027: 00:19:07:c6:39:60 Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 1
    *spamApTask2: Jan 30 09:46:59.028: 00:19:07:c6:39:60 No AP entry exist in temporary database for 10.64.94.52:2134
    *spamApTask0: Jan 30 09:46:59.127: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
    *spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2135
    *spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
    *spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
    *spamApTask3: Jan 30 09:46:59.129: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
    *spamApTask0: Jan 30 09:46:59.129: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
    *spamApTask0: Jan 30 09:47:28.995: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
    *spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
    *spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2134
    *spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2134
    *spamApTask0: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
    *spamApTask0: Jan 30 09:47:58.856: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
    *spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2135
    *spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
    *spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
    *spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
    *spamApTask0: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
    *sshpmLscTask: Jan 30 09:48:10.688: sshpmLscTask: LSC Task received a message 4

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?

    After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?

    ofel wrote:
    After updating my iPhone 4 to iOS7, the controls on the headset are not working ..
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Read from socket failed: Connection reset by peer

    On Solaris 10 SPARC I have NO problem with establishing SSH connections.
    Here is proof:
    # svcs -a | grep ssh
    online Jun_02 svc:/network/ssh:default...but here is what can be found in /var/adm/messages
    Jun 7 04:09:16 my_host sshd[11701]: [ID 800047 auth.crit] fatal: Read from socket failed: Connection reset by peerTHIS IS IMPORTANT!!!
    This messages does not appear during I establish my ssh connection. It appears irregular.
    Does anyone know whats going on ?

    Hi Darren,
    that would make sense but I just made a test:
    I have opened tail -f /var/adm/messages and from other host:
    - telnet to it on port 22 - no message
    - closed client during establishing connection - still no message
    But I belive you must be right as I see no other possibility...
    Can I turn on more detailed logger in message to be able to see IP address of all host who are trying SSH connection ?
    Edited by: czezz on Jun 25, 2009 10:50 PM

  • Prcessing KEU5 transaction for multilple controlling areas in parallel

    Hi,
    I have executed KUE5 transaction with an assessment cycle for a controlling area and when i try to execute the same transaction with an assessment cycle for another controlling area in parallel, there is an error message 'Cycle YOCETEST2 01.02.2008 cannot be started because run group 0000 is locked'.
    Please provide me a solution to execute the assessment cycles for multiple controlling areas in parallel.
    Regards,
    Satish.

    Hello,
    Are you able to solve this? I am getting this error sometimes when the transaction KSV5 fails.
    Please let me know.
    Thanks,
    Rushi

  • Allowing trasaction currency post to the Controlling area

    Hi All,
    My Exisiting Configuration is as follows:
    local curr: MYR
    CO AR CURR: MYR (ALL OTHER COMPANY CODES ARE ASSIGND TO THE CO AREA)
    OBJECT CURR:MYR,
    NOW WE ARE RESETTING THE COMPANY CODE, AND CHANGE CONFIGURATION  AS FOLLOWS
    LOCAL CURR  : USD
    SEC PARAL CURR: MYR (HARD CURRENCY)
    CO AR CURR  : MYR
    BUT THE OBJECT CURRENCY IS MYR,WHEN I POST THE TRANSACTION IN USD THE "ERROR COMES UP OBJECT CURRENCY MAINTAINED IN MYR"
    IF I WAN TO MAKE THE CONTROLLING AREA TO ALLOW THE TRANSACTION CURRENCY WHAT IS THE SETTING TO BE MADE,(THE SYSTEM IS IN PRODUCTION)
    YOUR INPUT NEEDED ON THIS ........
    REGARDS
    RAJ

    Hi,
    Go to maintain controlling area. Double click it then in assignment control maintain " cross - company-code cost accounting. Then try to give controlling area currency as 20.
    Now you try to post the document in USD. If it does not happen...no other clue...
    That is why at the time of original implementation among many things Currency type & currency also to be discussed and frozen out.
    Regards,
    Velumani

  • WLC 5508 - LAP1242: Failed to handle capwap control message from controller

    Hello everyone,
    after finally successfully upgrading my WLCs from 6.0.199.4 to 7.6.100.0 there is another problem showing up...
    If I want to change any configuration regarding the APs on the WLCs (which doesn't work) I get the following error-messages from the APs:
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.169: %CAPWAP-3-ERRORLOG: Validate Msg: msg type 12 does not supported payload 215
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.169: %CAPWAP-3-ERRORLOG: Validate Msg: error in Unknown Payload(215) payload (received length = 9, payload type = 215)
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: Failed to validate vendor specific message element type 215 len 9.
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: Failed to decode Configuration update request.
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 7 state 11.
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.171: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    Find attached some informations regarding the AP and the 5508.
    Any suggestions are, as always, highly appriciated.
    Regards
    Manuel

    Good morning,
    if I need free space at the flash: How much is "enough" to handle config changes?
    Here you can see the filesystem of one of my accesspoints (all are affected):
    AP#dir all-filesystems
    Directory of arch:/
        2  -rwx       91288  Feb 22 2014 18:16:42 +00:00  event.log
        8  drwx         448  Feb 22 2014 18:16:38 +00:00  c1240-k9w8-mx.124-25e.JAO3
        4  drwx           0   Nov 2 2011 23:32:18 +00:00  configs
        5  -rwx         397  Feb 22 2014 18:19:03 +00:00  env_vars
        6  -rwx        6168  Feb 27 2014 18:14:24 +00:00  private-multiple-fs
    No space information available
    Directory of flash:/
        2  -rwx       91288  Feb 22 2014 18:16:42 +00:00  event.log
        8  drwx         448  Feb 22 2014 18:16:38 +00:00  c1240-k9w8-mx.124-25e.JAO3
        4  drwx           0   Nov 2 2011 23:32:18 +00:00  configs
        5  -rwx         397  Feb 22 2014 18:19:03 +00:00  env_vars
        6  -rwx        6168  Feb 27 2014 18:14:24 +00:00  private-multiple-fs
    15740928 bytes total (10614784 bytes free)
    Directory of zflash:/
        2  -rwx       91288  Feb 22 2014 18:16:42 +00:00  event.log
        8  drwx         448  Feb 22 2014 18:16:38 +00:00  c1240-k9w8-mx.124-25e.JAO3
        4  drwx           0   Nov 2 2011 23:32:18 +00:00  configs
        5  -rwx         397  Feb 22 2014 18:19:03 +00:00  env_vars
        6  -rwx        6168  Feb 27 2014 18:14:24 +00:00  private-multiple-fs
    15740928 bytes total (10614784 bytes free)
    Directory of archive:/
    No files in directory
    No space information available
    Directory of system:/
        2  dr-x           0                      memory
        1  -rw-       17631                      running-config
    No space information available
    Directory of nvram:/
       30  -rw-           0                      startup-config
       31  ----           0                      private-config
        1  ----        4100                      lwapp_ap.cfg
        6  ----         528                      lwapp_ap_tlv.cfg
    32768 bytes total (26572 bytes free)
    Regards, Manuel

  • SXPG_COMMAND_EXECUTE - Recv failed:Connection reset by peer

    We are calling external commands in a batch job using the SAP supplied function module SXPG_COMMAND_EXECUTE.  However, if the external command takes longer than 2 minutes (120 seconds) to execute the call to the external command is terminated (from the SAP perspective) with the message Recv failed:Connection reset by peer.  The termination is precisely at 120 seconds.  The external command, however, continues to run as an u201Corphanu201D task and finishes normally.  However, due to the connection termination, SAP is no longer aware of it.
    Do you have any ideas where the termination is occurring and/or where the wait limit of 120 seconds is set?

    CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
        EXPORTING
          commandname                   = 'ZTEST_BATCH'
          additional_parameters         = param1
          operatingsystem               = castserveropsys
          targetsystem                  = target
          stdout                        = 'X'
          stderr                        = 'X'
          terminationwait               = 'X'
        IMPORTING
          status                        = funcstatus
        TABLES
          exec_protocol                 = iserveroutput[]
        EXCEPTIONS
          no_permission                 = 1
          command_not_found             = 2
          parameters_too_long           = 3
          security_risk                 = 4
          wrong_check_call_interface    = 5
          program_start_error           = 6
          program_termination_error     = 7
          x_error                       = 8
          parameter_expected            = 9
          too_many_parameters           = 10
          illegal_command               = 11
          wrong_asynchronous_parameters = 12
          cant_enq_tbtco_entry          = 13
          jobcount_generation_error     = 14
          OTHERS                        = 15.

  • Reset the control numbers in Oracle B2B

    Is there a provision for reseting the ISA / GS control numbers for outbound documents in B2B ?
    We are presently moving from an older EDI translator to B2B, and the requirement is to ensure that we start from the next number that the older translator has generated for the ISA and GS control numbers. This would ensure that the trading partners don't receive a duplicate control numbers (control number already generated by the previous translator) and may reject the file, marking it as duplicate. Most trading partners check for duplicates based on control numbers of the incoming file.
    Any help would be appreciated ?

    Hello Shailesh,
    Please reset the control numbers in B2B_CTLNUM_OUT table.
    Rgds,Ramesh

  • Extraction error "Target cost version in controlling area does not exists"

    Hi Gurus,
    I am trying to pull some data from a SAP OLTP system into SAP BW 710 system, using extractor "0CO_PC_02". The data load is failing with the below error message:
    Target cost version in controlling area does not exist     KN     147
    Target cost version 2 not defined. Check your entry     KV     35
    Internal program error ( Order 000010510554 Version 002 )     RM     11
    Errors in source system     RSM     340
    The same error is thrown when I am trying to execute the extractor in RSA3 in the source system.
    Please help me with the resolution of the same. It's a high priority job we are handling as of now in this.
    Thanks & Regards,
    Vikas Kr.

    You are attempting to display data on a target cost version that does not exist in controlling area.
    see this http://forums.sdn.sap.com/thread.jspa?threadID=1609418
    http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YV-KN147

  • OPMD Install failed to open service control manager

    Hi
    I have an oracle 10.2.0.5 RAC installation on windows 2008R2 and I am encountering error when trying to install opmd-install
    I received the error OPMD Install failed to open service control manager

    Hi,
    It seemed the issue was resolved by installing the Agent manually. Since the subdomains are fully trusted, there is no need to install Gateway or Management Server in each subdomains. After installing the agents, the alerts can be received on domain.
    Deploying Agents Across Multiple Domains
    http://technet.microsoft.com/en-us/library/cc179947.aspx
    Niki Han
    TechNet Community Support

  • Failed to import ActiveX control

    I am using VB2005 express and VC#2005 express. With my old friend
    VS2003, whenever i needed to add flash to my WInforms, all i needed to
    do was to add the control as a com component and drag it on the stage
    from the toolbar. Now, when i did the same in new express version,
    althogh it is added in the toolbars and the references list, but still,
    whenever i try to drag a shockwave flash instance on my win form, i get
    the error:
    Failed to import ActiveX control, please ensure it is properly registered.
    does some one have any idea how to add flash comntrol as we used to do in earlier versions? Please reply this ASAP.
    Thanks and regards.
    Syed Mazhar Hasan

    None of these solutions are working for me.
    In VS2005 I'm stuck. I also have VB6 installed, and there the OCX imports fine. In VS2005 I get the above error message, but sometimes I also get a ResolveComReference error.
    1) When I go to the obj directories the interop files aren't even generated (so the delete then re-add solution doesn't work for me).
    2) running tlbimp on the ocx gives me a TI0000.exe error - Error loading library
    3) running aximp on the ocx generates a TYPE_E_CANTLOADLIBRARY error.
    This ocx has loaded fine in VS2005 before I reformatted my PC, and loads fine on other machines. VS2005 is local, but our code is on a server share drive, so my first thought was some kind of security settings was messed up, but I moved everything to a local drive and still no dice.
    I've also made sure that I have the latest VS2005 service packs, and XP is compeletly up-to-date.
    I've been working on this for almost a week with no progress, and I'm getting pretty desperate. Anyone have any other ideas?

  • Reset Validator controls in Adobe Flex 3.0

    Hi,
    I am new to Adobe Flex. I am using Flex Builder 3.0 to build
    an application. I am having a problem with validator controls. The
    senario is as follows:
    About the problem:
    I am having a page with two text boxes. If the user does not
    enter anything in the TextInput, am alerting the user to enter a
    value using the validator control.
    If the user enters the data and clicks on save, am displaying
    the details in a grid and am clearing the TextInput fields. After
    this process the TextInput fields are again getting validated and
    shown as an error.
    Please adivce me how to avoid this.
    Regards,
    Raj.

    I'm hoping you have found the answer by now, but...
    To reset a control, set the errorString to the empty string.
    myControl.errorString = "";
    And do this for all of the controls that you wish to reset.

  • Credit control area issue.

    hello Experts,
    I recently join a support team.
    Schenario -
    - assigned cocd to credit contrl area checked for "Overwrite CC", no value in "crd contrl area" Field.
    - 9 credit contrl areas are permitted to one company code.
    - Particular customer has different credit limits in different credti contrl area in FD32.
    User raise issue-
    While any FI Posting related to customer, there should be a mendetory field to enter Credit control area for both debit and credit item, even when document is reversed.
    I m confused.
    Can any one give me idea to resolve.
    Waiting for replay
    Subodh

    Hi,
    the credit control area relates to customers, not to individual documents. It may help to think of this organization:
    - credit control area is linked to company code
    - customer is assigned to risk category in a credit control area
    Now when you post in AR/FI the system uses the link between company code and credit control area set up in customizing.
    There is no need to make an entry in the posting document.
    Hope this helps,
    Rudolf

Maybe you are looking for

  • I cannot install Adobe Air on XP sp3

    I cannot install the latest Adobe Air on XP sp3 I get the following error Sorry, an error has occurred while installing Adobe Air. Installation may not be allowed by your administrator. Please contact your administrator. I AM the Administrator I have

  • Inactive (or broken) reset button on my Ze

    Hello! I recently tried using the recovery tool on my zen V to diagnose any issues. The player had been charging on the computer for some time but was not being recognized by the computer itself (not unusual). So when I tried to use the recovery tool

  • Resizing a flex application

    I am trying to write a resize function for my flex application. I have pasted a simple sample below, but when I try to run this application I get the following error: TypeError: Error #1009: Cannot access a property or method of a null object referen

  • Downloading adobe presenter 10

    How do I download Adobe presenter 10, I have already purchased the License for a single user.

  • Error code 1064 mysql and crystal reports XI

    Post Author: aminski CA Forum: Data Connectivity and SQL Hello friends , I am trying to create a Crystal Report connected to a MySQL database using an ODBC (RDO) connection.  I created a DSN using the MySQL Connector/ODBC 3.51 and mysql database 3.23