F-32 the entry is missing in table

Hi ,
When we are performing the transaction F-32, we are getting the below error message
" The entry YYY is missing in table T043G ".
However, I could find the tolerance groups attached to this company code YYY in OBA3.
I have serached the forum and it says to create another entry for company code YYY in T043G and leave the Tolerance group as blank to resolve this issue..
But if i assign the Tolerance group as Blank to this company code, then would the tolerance check be completely removed for this company code ?
How does this work...Any idea on the after affects of this change...
Thanks,
Srikanth.

Hi,
Through a blank tolerance group, we specify the lowest level of payment differences and cash discount allowed for Customer.
this will be applicable for all customers in co. code. For any other set of customer whom we can have less control, we can create a new tol. group with desc and assign the same in master.
Regards,
Gangadhar

Similar Messages

  • "The entry    is missing in table T030"

    Hi,
    I'm trying to close a period but, after all the selections made, when I execute I get this message: "The entry is missing in table T030". I mention that I'm trying to do this in localization for Romania. Maybe somebody could tell me what this message means and what should I do?!
    Thanks, Andreea

    Hi Andrea
    It looks like there is some account determination that is missing. Please recheck using TCode OBYC(relating to MM). Also please provide detailed information as to what transaction was exceuted when you got the error message.
    However do check your automatic posting procedures in OBYC.
    Regards,
    Karthik
    Message was edited by:
            Karthik Coneru

  • Entry VEHICLE missing in table COM_SE_BUSOBJ

    Hi Experts,
    I’m facing an issue in SAP VMS (Vehicle Management System). If I click on the “Find” option in VELO transaction then list of vehicles will be displayed but system throwing following error” Entry VEHICLE missing in table COM_SE_BUSOBJ”
    Plz help me to solve.
    Thanks in advance!
    Regards,
    Naga

    Hi Naga,
    You have to maintain business object VEHICLE in customizing table COM_SE_BUSOBJ:
    SPRO -> SAP Netweaver -> Application Server -> System administration -> Search engine service -> Define business objects for search engine service
    Maintain record:
    Business object: VEHICLE
    Object type: 1
    You have to enter the Index-ID for SES, see F1-help.
    Regards
    Joachim

  • Copying is not poss.because an entry is missing in Table TVCPL: L2, VTLA

    HEllo all,
    we just created a new condition type.
    (Re: sales order - new condition type - account assignment)
    Now when I create a new sales order and use this condition type, it is working fine. When I want to deliver the order, it gives me this error message:
    Copying is not poss.because an entry is missing in Table TVCPL: L2
    So now according to other threads in this forum, I went to copy control settings in VTLA. Now I wanted to create entry for Target delivery type L2, but the problem is, there is no target delivery type L2??? It is not in the list.
    What can I do??
    Thanks
    Anne

    Hi Raja,
    that's what I tried to do:
    I created a new entry, entered L2 for target delivery type and OR for source sls doc type.
    When saving I am getting:
    Entry L2   does not exist in TVLK - check your entry
    Thanks
    Anne

  • Copying is not poss.because an entry is missing in Table TVCPL: AF

    Good night,
    When Create outbound delivery with order reference, got an error :
    Copying is not poss.because an entry is missing in Table TVCPL: AF
    Message no. VL473
    go to t-code :VTLA
    want to create target delivery for AF but no selection for AF.
    Order transaction using TAV.
    Guru, guide me please.
    Thank you,

    Hi
    You have to create teh copy control from order to delivery process in VTLA
    You can copy the s tandard one OR to LF and then create copy control for   your new document  types.
    You have to configure at the header and item levels in this tcode. For detailed information, you can put F1 in each field and find out the purpose of each field.
    Reward if this helps.

  • Copying is not poss.because an entry is missing in Table TVCPL: ZO26

    Hi..
    In VL01N - outbound delivery , the following error occurs
    "Copying is not poss.because an entry is missing in Table TVCPL: ZO26 "
    here ZO26 - Sale doc. type
    Plz give me the solution , as soon as possible.
    Regards
    Deepa.

    Dear Friend,
    Please check you document flow settings ..
    What is understood from the error is that your item categories which are determined in the sales order are not relavent for delivery.
    While coping your item categories did you check for coping all the relavent item catwgories detminations.
    Next chech which item categories is determined and copy control settings.
    The problem here is the order documents items are not able to copy into delivery  because of your document flow setting.
    Check the same .You will be able to get the error.
    reward points if helpful,
    regards,
    Amlan Sarkar

  • Copying is not poss.because an entry is missing in Table TVCPL: Z03 Z15 Z25

    At the VL01N transaction itgives out a message of :"Copying is not poss.because an entry is missing in Table TVCPL: Z03 Z15 Z250" . I can't make the delivery even nor pass the initial screen of VL01N. Can anybody help me with brief explanations?
    Thanks in advance.

    Hi Hikmet Akcali,
    Copy Control for Delivery is not maintained in the system for Delivery type Z03 Sales Doc type Z15 and Item category Z250. Thats why you are getting this error.
    Please maintain the copy control settings in VTLA ( copy control sales doc to delivery doc)
    For this go to VTLA ( tcode) and create entry for Target delivery type Z03 and source doc type Z15 , by copying from an existing combination which is most similar to this Dely doc / sales doc combination.
    If this entry already exist then , create the entry for the Item category Z250 in the item level at VTLA. Maintain the settings like copying requirement and other field suitably.
    Save the settings and then create fresh delivery against the order.The error will not pop up.
    Thanks!

  • Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2

    Hi,
    I created  sales order and delivery for consignment purpose and for return it I create return sales order again, but at the time delivery creation the system shows me the error:
    "Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2"  Message no. VL473
    I checked VTLA and copy sales order type to delivery type with following data:
    Order requirements: 001
    Combination requirement : 051
    Header data: 001
    and copy item category REN as follow:
    order requirements: 101
    Item data: 101
    business data : 2
    but problem still remained. So I want to know how I can fix this error message?

    Dear,
    Table TVCPL is the table which is used for copy control so the error says maintain it properly and as per message
    there is error of Copy control Between Document ZOV2 to ZDV2 so I would suggest following step,
    1)Check the Item Cat.(REN) is define for delivery (ZDV2) check it out if Item Cat. (REN) determination is done in Delivery
       That is the only thing which will be missing, if stil problem exist then
    2) Do set Copy Control altogether again just copy it between RE TO LR and rename as ZOV2 and ZDV2 and retry ur process.
    AND IF U ARE DOING CONSIGNMENT PROCESS THEN LET ME KNOW AS IT REQUIRE DIFFERENT SETTING.
    Regards
    AJIT K SINGH
    HAPPY TO HELP U

  • Debit entries are missing in table J_1ITRNACC

    Dear CIN experts,
    I have very strange problem in case of Capital purchase.
    My excise posting for capital goods is BED       100 Rs.
                                                                  Ecess       2 Rs.
                                                              H.Ecess        1 Rs.
    But at the time of excise posting in J1iex Accounting simulation is            BED   101.5   Cr
                                                                                    On Hold BED     50.0   Db
                                                                                    BED     51.5   Db 
    System is not considering 103 Rs amt for BED.
    After clicking on post system gives above error Debit entries are missing in table J_1ITRNACC.
    Please suggest for this problem.
    Regards,
    Gitesh

    Hi,
    SPRO-Tax on goods movement-India-Specify excise accounts per transactions.
    Check for GRPO & CAPE, whether Dr & Cr accounts are maintained properly or not.
    I think, entry is missing here.
    Regards,
    Piyush

  • Error "The entry is missing in T009" during PO creation

    Hello expert,
    I have created one new plant. Also assign with Company code and Purchasing Organization. Now when i am going to create Purchase Order, error message is showing "The entry is missing in T009"
    Pls give resoluation asap.
    Regards,
    Nilesh

    Hi Nilesh
    See this error is coming because of youir fiscal year variant. There are many errors you can get apart from T009...like T009B,C.
    You please consult your FI resource for this. You have to maintain Fiscal variant. As you have indicated that you maintained it..please cross check with FI resource. T.codes are OB27& OB37

  • Maintain the entries in /IXOS/DC_TALNTUA table

    Hi,
    I want to modify the entries in /IXOS/DC_TALNTUA table for maintaining the archive mode for a particulat user.
    Is there any transaction/config  to maintian this table in SAP?
    Thanks& Regards
    Manoj  Seth

    Hi Manoj ,
    You can do this by table maintenence SM30.
    You should also confirm  that is their any existing report to do so , As per my understanding there should be as we do not handle these cases by making direct entries in table. Please confirm from your side.

  • Copying is not poss.because an entry is missing in Table TVCPL: ZOR3

    Copying is not poss.because an entry is missing in Table TVCPL: ZOR3
    Message no. VL473
    Murli

    hi
    maintain copy control for sales documents to delivery documents in VTLA
    zor3 to lf as target
    regards]

  • How to add the entries and how to delete the entries from custom Z-table?

    Hi Experts,
    My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
    Here how to add the entries from program to Z-table.???
    And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
    Could you please guide me the logic how to crack this???
    Let me know if you need more Info
    Thanks
    Sanju

    Hi Sanjana,
    What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
    *Insert Statement
    INSERT dbtab
    Syntax
    INSERT { {INTO target VALUES source }
           | {     target FROM   source } }.
    Effect
    The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
    System Fields
    The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
    sy-subrc Meaning
    0 At least one row was inserted.
    4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
    The INSERT statement sets sy-dbcnt to the number of rows inserted.
    Note
    The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
    *Modify Statement
    MODIFY dbtab
    Syntax
    MODIFY target FROM source.
    Effect
    The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
    System fields
    The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
    sy-subrc Meaning
    0 At least one line is inserted or changed.
    4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
    The MODIFY statement sets sy-dbcnt to the number of processed lines.
    Note
    The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
    Hope it helps...
    P.S. Please award points if it helps...

  • How to restrict the entries of a database table based on the user name

    Hi All,
    I have created a Database Table. Table maintenance generator is generated for the table.
    UNAME(user name) is one of the fields in the table. whenever the user creates a new entry, the field UNAME will be populated automatically with SY-UNAME value. I have used Table event '05' to do this.
    My requirement is...
    When a user tries to maintain the entries of the table using SM30, when 'DISPLAY' is chosen, all the records of the table should be displayed.
    When 'MAINTAIN' is chosen, only those records which have UNAME = SY-UNAME(User Logged in) should be in EDIT mode. and rest all the records should be in DISPLAY mode(greyed out). It should allow to edit only those records which are created by the user logged in.
    Could you please tell me how to do this..? Thanks in advance.
    Thanks & Regards,
    Paddu.

    HI,
    In table main. gen there are number of events , try to select one event like 05 for the Sy-uname.
    For the  requirement:
    In that event write the code like
    this is basic idea not the code:
    Case ' Sy-ucomm'.
    when 'display'.  " button
       Nomally for the display button it will show all the records, but we need to write a code like this.
    select all records frm the table.
    ( Need to write the code in case if the user first maintained the data then again press the display , list has to be refreshed.)
    when ' Maintain'. " button.
    Fetch the records that are with SY-UNAME and find out the edit function and implement it on each and every record.
    endcase.
    Thanks and Regards,
    Bharani.

  • How can I eliminate the entries in ROOSPRMSC/ ROOSPRMSF tables?

    After the SAP   R/3 QA homogeneous system copy refresh (overwrite) from Production SAP R/3:
    1.RSSDLINIT / RSSDLINITSEL tables in BW and ROOSPRMSC / ROOSPRMSF tables in the source system display different entries. More precisely:
    •ROOSPRMSC/ ROOSPRMSF tables and RSSDLINIT / RSSDLINITSEL tables have different entries in INITRNR and RNR fields
    •The field SLOGSYS in  ROOSPRMSC/ ROOSPRMSF tables contain an id client different at SAP R/3 QA source system in which applications run
    2.BW delta Queue is empty in SAP R/3 QA source system.

    Hi,
    Perform the following steps:
    Step 1 : Delete all the entries from BW delta queue.
    Step 2 : Check all the info-package init selections and delete them if it has not been deleted yet.
    Please let us know if the problem still persists.
    Thanks
    Soumya
    Assign points if useful***

Maybe you are looking for