F-37 and customer invoice

While making an entry in F-37, is it possible to prebill the customer

Hello,
It is impossibke to Prebill the customer invoice when creating down payment request in F-37. because the down payment request is just a note, not real down payment, only when down payment was created, then
this down payment could be cleared with customer invoice in F-39.
With Best Regards,
Gladys Xing

Similar Messages

  • Outbound delivery date in June and customer invoice post in July,tax rate?

    Hi Experts
    tax rate (June)=22%
    tax rate (july)=24%
    issue is Outbound delivery date in June and customer invoice post in July,so sytem taking tax rate =24% instead of 22%.Because outbound delivery is happened in June.
    Please let me know that,
    1)how system picking tax rate on base like billing date or service render date or ...?
    2)how to take tax rate (june)=22% in July posting.
    regards
    sachin

    Tax Rate is picked based on the pricing date.
    You need to check with your SD collegue to configure the pricing date to be equal to outbound delivery date to pick the outbound delivery date based tax rates.
    Regards,
    Gaurav

  • Invoice in SD and Customer Invoice in FI

    Hi,
    We can create invoice in Vf01 in SD billing module and customer invoice in F-22 in FI module, may I ask what is the difference between them?

    Hello,
    The diff between VF01 & F-22:
    VF01: This will create only billing document in SD module, No financial impact in FI.
    F-22: This will create invoice document in FI and accounting doc will be generated.
    In real time with the integration(FI-SD) accounting doc automatically generated, no need to post again in F-22. If u can make only in VF01 then ther is no accounting doc and payment is also shows pending.
    thnkas
    Para

  • Standard form :'Customer  invoice' and 'customer Invoice : Property Damage'

    Hi
    Can someone tell me what is the standard form for 'Customer  invoice' and 'customer Invoice : Property Damage'.? Is there any config involved.
    I'll reward points for any helpful answer.
    -Nash

    LB_BIL_INVOICE is the Standard SMARTFORM for Invoice  Document
    you need to do Output Type/Control configuration(TCode NACE)

  • Who can explain the 'Legal Invoice' and 'Custom Invoice'?

    Hi,
    Why after PGI, the 'Legal Invoice' and 'Custom Invoice' will be printed out??
    Could you tell me what useage of them??
    As i read an document metioned that 'Legal invoice for Export'..'Custom Invoice for import'...
    What's the meaning??
    Thanks!!

    Hi, Yathish,
    Could you make an example to this?
    For example..
    If we ship products from US->UK.
    When the products is out from US, we submit the Legal Invoice to US Custom and End Customer in UK?
    When this products is shipped into UK, the Custom Inovice...
    Sorry, i still didnt get it.....
    Hope could get help on this....
    Thanks!!!!

  • IDOC FIDCCP02 and Customer Invoice Clearing

    All
    Has anyone successfully used IDOC FIDCCP02 for customer invoice clearing and/or clearing with residual items?
    Any comments are appreicated.
    Thanks

    I once used this IDoc to post FI documents e.g. travel costs from non SAP systems into the ECC 6.0. The task was the clearing of those costs.
    AFAIK posting residual items is possible. Just check the IDoc documentation (transaction we60) for the KOART / BUZID fields in the E1FISEG segments. The function IDOC_INPUT_FIDCC1 will process the IDocs.

  • Order Related bIlling Reqd for both Inter Company Inv and Customer Invoice

    Hi,
      I have 3rd Party scenario whereby I have to generate an Order Related Billing. I want to generate both a Customer Invoice and an Intercompany Invoice w.r.t Sale Order . Current system is allowing me to generate either one of them and not both. Is there any copy control functionality from order to bill vtaa through which I can generate both Customer and Inter Company Invoice (IV).
    Regards,
    Binayak

    Hi Binayak,
    Chang copying requirement to 008 for relevant item category In copy controls from order to billing, then you will be able to create both customer invoice & intercompany invoic.
    Hope it will help you and let me know if you have any questions
    JM

  • Document Splitting - Bank and Customer Invoice

    Hi Experts,
    I have document splitting method 0000000012 and under that Business transaction 1000 i have created a new transaction variant for the client specific requirment
    Further for this combination i have linked item category 04000 for bank accounts with all categories attached to it and 02000 for Customer accounts with revenue attached to it
    Now when i pass a customer invoice for profit center A and when i clear this using F-28 giving profit center B, the system is inheriting Profit Center A form customer invoice and for the bank line item it is split according to the base row which is Customer invoice hence both item reflects profit center A and profit center B which is keyed in totally ignored
    My client requires that the inheritance from customer invoice needs to be ignored and the profit center needs to be updated as per manual entry. hence the entry should like the following
    Bank Dr Profit center B
       To Customer Cr Profit Center B
    Profit Center Clearing A/c Dr Profit Center A
    To Profit Center Clearing A/c Cr Profit Center B
    I have not given automatically split tick in any of the linked categories
    Please advice

    Hi Expert,
    Go to the below Path: IMG -- Financial Accounting (New) -- General Ledger Accounting (New) -- Business Transactions -- Document Splitting Activate Document Splitting
    Here you need to UN-select the Inheritance Check box.
    Inheritance: Indicator is not set ('UN-Select Check box ')
    Lines can be left without account assignments, even if the document splitting characteristics in the document are unique. Exception: You have set the Standard Account Assignment indicator.
    Inheritance: Indicator is set ('Select Check box ')
    Indicator is set('X')
    If the rule-based document splitting produces lines without account assignments, these lines inherit the document splitting characteristics.
    Regards,
    GK
    SAP

  • Table For Open Sales Order And Customer Invoices

    Dear Gurus,
    Are there any table to know open Sales orders and pending invoices for Customers?
    Wishes,
    Abhishek

    Hi,
    Go to T code VA05 and select open sales order radio button. Put other input parameters like date range or sold to . Execute you shal get list of all open sales order.
    For pending invoices go to T code VL04 and you get list of all billing not yet created even though GI is done.
    These are standard SAP functionality and can be used rather than looking in a table level.
    Regards
    Vivek

  • IDOC PEXR2002 and Customer Invoice Clearing

    All
    We are able to successfully clear customer invoices, on account posting or clear with residual items with PEXR2002.
    We are however not able to figure out how we populate texts in the FI Postings.
    Also we have a requirement that the GL account to which the FI posting is done along with customer invoice clearing varies based on certian ID's. Is there a way to handle this or we have to use the account modification?
    Is there any field on the IDOC which will allow us to enter a GL account to which the FI posting needs to be made?
    Thanks
    Edited by: Kirti Bhardwaj on Apr 14, 2011 6:15 PM

    Hello,
    For the texts you can try a subsutition, specifically the exit program or use a BTE via the FIBF transaction.
    Mark as helpful.
    Regards
    Waza

  • Commercial invoice and Customer Invoice

    Hi
    What is the invoice type for commercial invoice u2013 how is it different from a regular F2 customer invoice?
    Please advice
    Thanks,
    Dhruv

    Both are same.  Only the terminology differs.
    thanks
    G. Lakshmipathi

  • Profit centerwise Vendor and Customer line items view

    Deal ALL,
    We have not activated Business Area.
    We have 10 plant under one company code. Client is booking the vendor and customer invoice as per the cost center and profit center of the plant. Payment and Receipt is also made according the bank maintain for each plant. As one customer or vendor is dealing with all the plants.
    Can any body can help me out how to get the vendor and customer line item display according plant or cost or profit center wise, so we can make or receive payment accordingly.
    Request you all to reply.
    Thanks & Regards,
    Bhadresh

    Hi
    Try the transaction codes for Profit Display by suitable config in TCode O7F1, O7F2, O7F3
    Assign Points if useful
    Regards
    Sanil

  • Vendor & customer invoice posting.....while simulating  -- error ?...

    Dear,
       While posting vendor and customer Invoice----
          When Invoice date and posting date has given as xx.xx.xxxx with fiscal year xx.xx.xxxx while simulating -  the error message saying that  "posting takes place in the previous fiscal year". When i wanted  to overwrite the error message
    it is telling that --in company code number range 19 is missing for the fiscal year. For the customer the number range 21 is missing. I gave the number ranges while creating vendors and customers accounts. As the document types are already given in default. I haven't changed them.
       As such invoice postings is not saved.
    Pls help me out in this regard.
    Thanks in advance
    regards
    Jyothsna Singh

    Hi....
    The error pertains to maintaining accounting doc number ranges.
    Go to T.code FBN1-- Give company codeselect change intervals buttonCreate number ranges14,16 and 18 for customers and 15,17 and 19 and 21 (21 if required) for the fiscal year.
    Save data.
    Post the doc
    Assign points if helpful
    Regards
    Aravind
    Message was edited by:
            A.Aravind

  • Customer invoice doument and cancelled document are showing under openitems

    Dear All,
    I have created customer invoice in VF01 and cancelled the invoice in VF11.
    1.System is showing Invoice document and cancelled document under open items list in FBL5N customer line items.
    A. Is this correct?
            or
    B. When we cancelled the invoice document it should automatically go to cleared items list?
    Kindly provide me what is the correct?
    Thanks & Regards,
    Saisri.

    Hello,
    Once you cancelled the invoice document then you have to clear manually those items in tC: F-32. If you are not cleared then system will show you as open item. After cleared in F-32 then status will change from Open to Close.
    Thanks
    Para

  • How can i clear the vendor and customer open line items at a time same vendor as a customer of the company (same vendor same customer and equal invoices )

    my vendor and customer are same . purchase invoice due100000 and sales invoice amount is also 100000 at a time with any manual action , have any setting for cleared both vendor and customer line items at a time ...........

    X Ltd. will be Vendor & Customer.
    Purchase Invoice is booked under Vendor SAP number & Sales Invoice is booked under Customer SAP number. Then you can transfer amount from Vendor to Customer or vice versa with T-code F-04.
    Then if you have transferred amount from customer to Vendor (F-04), Vendor account will have two entries Debit & Credit. Then go for clearance with T-code F-44 clear Vendor.

Maybe you are looking for

  • Mac Book Pro Wifi Data Locked up/freezes.

    Hello, i have had this problem now for about 3 months.  I have tried to search for the issue but i may be missing some key terms so if this is a known topic or somone can provide a link to a solution i would love it. So i primarly use my MBP on wifi

  • External keyboard won't work on DM4 laptop

    I have a Pavilion DM4 with Windows 7. Trying to connect an external keyboard that has a PS/2 cable end using adapter to USB plug. Keyboard doesn't work. What am I doing wrong?

  • ITunes 9.0.1 Crash Report - iTunes crashes @ launch

    I have an issue with iTunes 9.0.1 crashing shortly after it is started. 8.2.1 works fine. I have it installed on my Mac Pro 2.66GHz Quad running OS10.5.8 My error log is: Dyld Error Message: Symbol not found: _JVMGetJVMsWithCurrentArchitectureForTask

  • Various newbie questions!

    How do I tell if I am connected to WiFi or on Verizon data?  Is there another symbols selection page that I am missing to use the ^ character?  And perhaps the most frustrating of all, I can not "tap" the video icon to start/stop taking a video.  Tha

  • Trouble with activation after upgrading to iOS 7.0

    This is ridiculous. Still having trouble with activating my phone after upgrading to iOS 7.0. How does Apple expect us to make / receive phone calls???