F-43 and F-22 tcode will work by using the program RFBIBL00 in LSMW?
Hi Guys,
Currently we have the requirement like we need to post the vendor open items and customer open items by using the tcodes
F-43 and F-22.
Is it possible to create the records by using the program RFBIBL00 in LSMW?
Thanks in advance
SRS Reddy
Dear Reddy,
FB01 is the generic and classic transaction to post an FI document. There is no difference at all with F-43 and F-22 that are only linked to a specific document type and posting key.
I hope this helps You.
mauri
Similar Messages
-
I cannot figure out the best place to contact the company there is no phone # listed and email was not helpful!!!
Post your issue here: Recently active topics in Photoshop Family about Photoshop Lightroom some one from customer service should pick it up.
-
I have forgotten my password and my iphone is disabled. I have tried resetting it but every time the time is up and I think it will work, it says "cant connect to iphone because password is on" how do i reset my iphone 5?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.
Bose Product Support
-
I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.
You are welcome, ameronweb.
To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
If upgrading to 10.6.8 or higher is an option, you could use CS6. -
after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?
Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical. -
Currently have access to a friends computer with CS3 installed.I am going to buy a desktop with Windows 8 and I also have a laptop with Windows 7. What version of Photoshop is currently available that will work on both the desktop and the laptop? Can I install the same copy of Photoshop on the both machines simultaneously?
You can either buy a CS6 perpetual license, or Creative Cloud subscription. Both will run on the two computers you mention. You are allowed two installation with either version, but they must be for the same user. There is a cheap as chips Photography deal that gives you Photoshop and Lightroom for just $10/month, and feature gap is ever widening between CS6 and CC
-
I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE. PROBABLY BECAUSE IT'S NEW IT'S NOT ON THE APPLE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK. ANY THOUGHTS
Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2) -
iTunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2 -
I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.
Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic -
IPhone is plugged in to my laptop and is charging but will not sync. The phone logo doesn't appear in the right hand corner. i have updated itunes restarted both phone and laptop, changed connectors and still nothing. help?
Same thing happened to me, nothing is working. I've updated everything, restarted everything, nothing seems to work.
-
Which of these accesories will work 100% with the iPod Nano?
title about sums it, which will work with the ipod nano:
Radio Remote
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=MA0 70G/A
AV Connection Kit
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=MA2 42LL/A
ALSO is the av kit overkill for the iPod Nano? The av cable looks like it would not work,no video from Ipod so what the point of a video cable? Also I am pretty sure it doesn't have an ir reciever for a wireless remote so what that part of the av kit be useless too?The a/v kit won't work with the nano. Specifically the v part. The audio and the rest will work, though.
The radio remote works 100% with the nano. -
i have problem with firefox , it wont loud , the dose not come up , and it frizzes ? i even re-install the program but it wont work:( any suggestion would be helpful , thanks
i cant login anywhere as all my passwords are saved in firefox, i cant even access teh firefox preference to get my password, it's so sadYou likley have a corrupted Firefox preference or other support file in your User/Library folder.
Programs load these files from the user account to adjust to user specifications, instead of having multiple copies of the same program on the machine.
So when you reinstalled Firefox, it reinstalled the progrma only and the user support files remained from before.
To prove this point, use System Preferences to create another Admin account and log into it, Firefox should run like a charm.
To remove the Firefox support files from the problem user account your going to need to locate these files and delete them one at a time and try FF again and again.
The first one you shoull try is your FF .plist file located in your User/Library folder.
Clicm on the Finder and use the Go > Go to Folder and paste this
~/Library/Preferences
and press Go.
Now scroll down until you see the Firefox or Mozilla .plist file and Trash it, quit and restart Firefox, it will recreate the preference file with default settings you will have to reset it.
Next run through the list of fixes #1-13 here before proceeding.
https://discussions.apple.com/docs/DOC-3353
If you need help deleting other FF files, download the free Easy Find from MacUpdate.com and search for anything "Mozilla" or "Firefox" in your User account only and take your chances you hopefully won't delete your password file in the process.
You should have site passwords written down someplace and locked up tightin case you need them, a computer isn't totally safe and reliable. -
My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection
As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues. -
I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks
I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.
Maybe you are looking for
-
How do I change my Apple ID in the App Store?
I have two Apple ID profiles; one Canadian and one US. I want to only use my US Apple ID. In my iPad iTunes & App Store settings I can see that I am signed in under my US Apple ID however when the App Store prompts me to update apps, it request the
-
Problem in zmethod of bor object?
hi all, I have developed a workflow in which i have created one step to call a zmethod. and one function module is called inside this method with input parameters doctype,docyear and fyear.but the WF goes into error at this step. In log it is showing
-
Hello, I have uploaded my site using go live and when it is full screen mode it looks fine. However when it is in a smaller screen size the text runs away to the right and over the top of some adverts i have added. So you have to keep scrolling right
-
Can't delete Itunes and Quicktime from Control Panel
Hi. I posted a few days ago re: when I tried to update Itunes, I received the 1608 error. So, I have been trying to uninstall QT and Itunes via the Control Panel in Windows XP (Home) and when I click on both programs to remove, it blinks and then jus
-
I need to ensure that a unique key value is stored in a column. Values must be persistent across DB restores. A Sequence is fine to initially populate the column, but I must also ensure a key is applied to records inserted later (by third-party code