F-44 Clear Vendor Line Item

Dear all,
while posting transaction in F-44 i m getting error that is " the feild profit centre marked as balancing not filled with any value in line item 001"
please provide the solution........
Regards,
Manish

Hi,
Since you are using new GL and the profit centre scenario has been made in the settings, the first line item in your posting requires a Profit centre for balancing the entries. Please key in a profit centre in the required field. Otherwise the system will not allow posting as the entries with regard to profit centre is imbalanced.
Regards

Similar Messages

Document Splitting Error (GLT0002) while clearing Vendor line items by using F-44

Dear Guru's,
My client is getting below error while clearing the vendor using T code F-44, I checked related links but i could not find the suitable solution for this issue.
Doc No: 35112789 has the problem.. i checked Document splitting related Config but it is fine and
i can see the values in table FAGL_SPLINFO_VAL and not in FAGL_SPLINFO. Please help me to resolve the below issue

Hi,
You are getting this error as the document was posted before Document Splitting Activation or was posted when Document Splitting Active was deactivated.
For the Documents posted before Document Splitting, Migration Cockpit is to be used.
If there are few documents, then U can take a down time (ensure no document is posted in this time, if posted then you will get same error for the posted documents), remove the tick, clear the documents and Activate Document Splitting.
Regards,
Debashri Dutta

Missmatch vendor line items and vendor clearing

Hello all,
Im faced with a strange issue that i need some help on.
The transaction F-44 is very common in problems mainly due to wrong selection criteria but in this case the problem goes behond that.
I have a vendor with a total balance in its line items (FBL1N). - Example: 1.000u20AC
The line items has, in the vendor line, a base amount and tax amount showing the following
Base amount: 1.000
Tax: 200
The document generate a amount of 200 in the VAT GL account correctly.
The vendor line items shows me a total of 1.000u20AC but when i try to clear the open items i get a strange value of 1.200 showned.
Its like the total Base + Tax is being carried in for the clearing transaction.
I just need to compensate for the vendor balance it shows different value causing a missmatch in the totals corresponding to the amount of Tax I have in each line item.
Im using a special GL indicator because its an Asset Supplier.
Any idea what can this be related to?
Have you ever had a vendor balance showing one amount and when you try to clear it it shows another one?
Any help is highly appreciated.
Glytch

Hi Filipe,
I am having same problem as you.
Have you got the answer for this issue?
Can you share with me?
Thanks in advance.

F110 Issue Split of Vendor line items in Clearing document

Hi SAP Gurus,
I have a strange problem with F110 payment programme when i am clearing the single vendor line items example 4 line items through F110 system is spliting 4 line items into 4 different clearing doucments rather than creating one clearing document and showing an error 098 in document payment list.
Can you please guide me in this issue
Regards
Srini

HI
This may happen because of any of the following settings:
1) in the vendor master, payment transaction company code area, "individual payment" check box is selected
2) "single payment for marked item" check box is selected in payment methos company code.
Deselect the check box for making single payment for multiple open item

Purchase Order Number in Vendor Line Item (FBl1N) and Clear Vendor (F-44)

Hello,
I am not getting the Purchase Order Number in Vendor Line Item.(FBl1N).
Also during Clear of Vendor through F-44 i am not able to identify the Line item on the basis of Purchase Order Number.
Could any one pleae help me out on this issue as i have to clear the vendor Line item in mass.
Thanks
Nitin Jindal
Moderator: Please, respect the rules of the forum and search SDN before posting new thread. This question has been answered several times. Also, please choose proper forum to post your questions; this one is related to Financials and not to Controlling

Based on my experience std feature from SD-FI . Depending on the SD Billing config which can be by delivery(VTFL) or sales order(VTFA). You can assign options of A: Cust PO No. B Sales order no. C Delivery no. D External delivery no. E Actual invoice number to available header fields of Assignment No. or Reference No. Try it out

Can we clear more line items with different currency within one Vendor

Dear All,
Please guide us the following issue is
Can we clear two line items with different currency within one Vendor (i.e., Down Payment entry passed in EUR and Invoice in JPY).
Thanks in advance.
Regards
Srinivas

Hi
I suppose this should be possible in F-44, for any difference in forex enter a new line item 'Charge off diff.' to Dr/Cr Forex gain/loss account
Thank You,

Vendor Line Items

Is there any std BAPI or FM to get Vendor Line Items?
Is there any database Table which shows all Vendor line items (open and cleared)?
Note : table BSIK shows only open line items.
Thanks in advance. Points will be rewarded.

hi Nikhil,
yes, open items are in BSIK, cleared items are in BSAK. There is no table where you can find both! Acc. to my knowledge, there is no FM or BAPI to give back the information you need. You have to select from the tables. In fact you can find all items in BSEG (together with debitor and G/L items), but selecting from that table can take ages...)
hope this helps
ec

How to clear vendor open items if vendor invoice currency and payment currency different

Hi All.
How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD but local currency is INR
while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
I checked all configuration, configuration wise no problem
BR.
Chandra

Hi Chandra,
You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
Invoice is in USD - 1000 & INR - 60000
Payment is in INR - 60000
Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
Vendor A/c Dr 60000 (invoice)
Vendor A/c Cr 60000 (Payment)
Gain from exchange rate A/c Cr 100 (60000 - 60100)
Small diff.write off A/c (or) Dummy A/c Dr 100
After done the above posting, we have to pass below manual JV in FB01
Gain from exchange rate A/c Dr 100
Small diff.write off A/c (or) Dummy A/c Cr 100
Regards,
Mukthar

Iterating through bseg line items and picking the vendor line item

Hello,
I am creating a report in which i want to show the list of vendors (with their WHT's). The output will be based on selection of a certain period(range). I guess i have to first iterate through BKPF and get those documents that lie in the given range, then i 'll have to iterate through the selected documents in BSEG and pick out the vendor line items (KOART = 'S'). Will i be using GET for this..
Is this the right way? secondly, if yes, can sumone show me how to iterate through BKPF and BSEG and get vendor details.?
Thanks..
SHehryar

Hey,
Instead of selecting data from BKPF-BSEG you could use BKPF-BSIK-BSAK.
BSIK and BSAK have the same details as BSEG and are use by SAP for reporting purposes.
Similarly for customer the table are BSID, BSAD and for GL the tables are BSIS and BSAS.
BSIK will have the open items and BSAK will have the cleared items.
-Kiran

Profit Center on Vendor Line Item - When other line item is Bank

Dear Experts,
We have a peculiar problem here. Recently we went live with SAP ECC6.0. On the date of migration one cheque was issued to a Vendor who did not presented the same into Bank. The Cheque is now expired and we need to pass an entry into SAP as -
Debit 40 Bank Account $100
Credit 37 Other Clearing Vendor $100
The Vendor re-invoicing cannot be done as we cannot hit the Expense GL.
The core problem is that at the time of Vendor line item we cannot manually enter the Profit Center.
We have Doc Splitting activated and Profit Centers are mandatory.
If we decide to set the default Profit Centers for the concerned Reconciliation Account ALL of the goin forward postings, would hit this default PC.
Please Help
Thanks so much.

Hi,
I think you maintained the Document Splitting settings correctly, if the system is not allowing to clear the invoice u directly enter profit center in F-53
there is a option to enter profit center
if still system is not allowing to post you post by using F-02 and take document type as KA then it will allow to save the entry. you clear the both transactions by using F-44
making the default profit centers to reconciliation account is not suggestible, if your company is having operations in one area then you can use this will be possible in IMG - controlling - profit center accounting - assign profit center
I think it may help u and be careful and take authorizations from your superiors
All the Best

Multiple Vendor Line item in FB60

Hi Friends,
It may be simple question but I stucked with it.
I want to split a Vendor Invoice document in FB60(Enjoy Transactions.) by using special Indicator for Retention amount.
You will be clear from below example :---
        Inventory Rawmaterial   a/c   DR 1,00,000
               TO Vendor      a/c                       90,000
               TO Vendor   a/c(Special GL a.c) 10,000
I need to post above document in FB60 but not F-43.
Here my question is how to split vendor line items while posting of document in FB60.
Thanks in advance.
Kiran Konujula

Hi Kiran,
In my previous project we had retention and we have created payment term with installment payment.this will solve your problem.
Goto OBB8 T.code and create a payment term with installment payment (check this check box) and then goto OBB9 t.code to configure installment.
enter as follow
payment term   installment percentage
0001                       1          90
0001                       2          10
do the testing and let me know if you need some more information.
Thanks,
Rau

Vendor line item

Dear All,
My clients wants Spilts in Vendor line items while hitting that particular vendor.
Clearly,
We are giving all Advances like Loan advance, Salary advance to employeees as a vendor and
will deduct, while doing salary process by putting deduction wage type in 14 info type.
While doing Payroll posting 2 documents will be genarated one by one (simply 2 line items) for the same posting run because those 2 symbolic accounts are customized in vendor account in SPRO.
My Quesation and Requirement is,
After do the live Posting, if an employee have 2 deductions, say 2500 advance deduction,1500 Loan deduction (Total 4000 rupees
Will appear in as a one line item if u go for FBL1N transaction.
My client wants 2 line items, one line item shold have 2500 Rupess, Second line item 1500 Rupess,
Then he can strightforward one is for advance deduction, one is for Loan deduction.
is there is any chance to spilt the one vendor line iten which comes from by payroll posting in two.
Please help me on this.
Venkat

Please give any suggesition on this

How to calculate open balance Vendor Line Item Display(FBL1N)..?

hi,
is there any way to fetch data for open balnce in vendor report display(FI).
As I have to calculate Credit , Debit and Open balace , also Balance as on date. in Zreport with reff of FBL1N.
Vendor item data has been calculated from BSIk table. also open balance has to be fetched from with reference of Clearing doct and posting doct. i have
so if any FI technical or non techincal person has gone thru these things, those who have clear picture on these plese let me know.
Thnks in advance.

Please note that most vendor line items wont have a PC assigned to them.
I am not sure if you are refering to classic view or new GL data.
Anyway you can use the sum button, and sub total for your levels.
If you want to get the information sub totalled by PC, then I guess you are using the new GL and document splitting.
If that is the case you cannot use FBL1N for this.
There is however a set of reports in Accounts Payable, called new Gl reports and they will provide you the general ledger view and not the entry level view, and you can use the sum and sub total option.
Please award points if this is useful.
Come back if you need further help.

LSMW upload of vendor line items

Hi
I have prepared a template for vendor line item upload. For payments as well as invoice. Now when i upload, i want that it should automatically get knocked off.
For example:
There is a vendor invoice - Rs.100
Advance - Rs.40
Now when i upload both the line item, SAP should automatically show Rs. 100 & Rs.40 cleared with each other and Rs. 60 must be shown as open item.
Is there any link available for upload ?

Hi Max Tan,
a) You will probably only be able to use multiple T-Codes in one of the Standard uploads provided by SAP.In these you have to enter the T-Code to be used, so therefore you could code it to use different T-codes. A recording would not allow this.
b) Multiple in Sequence is just a design issue not any specific function. In reality they are seperate programms, but i use the same source file with coding to decide which items are used in each programm.
eg for Asset uploads- I have a single file but 2 programms.
                        a) Programm for main Asset numbers    -   Code   If Sub-no NE 0.
                                                                                Skip_Record.
                        b) Programm for Sub Asset numbers         Code   If Sub-no = 0
                                                                                Skip_Record.
In this case i have to run a) before b), therefore "in sequence".
KInd regards

Issue while clearing open line items

Hi team,
While clearing open line items for vendors, customers, and GL's system is posting new line items. It should post without new line items. Example
Customer is having debit and credit line items with same amount i am going to clearing manually thru f-32 here sytem is posting new document with new line items. It should post without line items. I have selected Negetive postings permited check box in OBY6. I have not selected check box in document types. Do i need to change in document type also or i missed anything in settings pls help me to overcome this issue.
Regards,
Nagaraju.

Dear:
The option to create a clearing document WITH or WITHOUT line items depend on the fields of the structure KONTAB_1ST if all the fields are equal in the documents the clearing document will be generated and posted without line items
Please check OSS note 95077. Check the settings in
IMG >Financial Accounting (New) >General Ledger Accounting (New) >
Business Transactions >Document Splitting >Activate Document Splitting
Check the following link for the same
F.13 clearing Document contains Lineitems
Regards

F-44 Clear Vendor Line Item

Similar Messages

Maybe you are looking for