F/change: how enable it to see the whole spread?

These screenshots show how f/change is hiding some parts of the operation.
How to maintain the straight spread?
It is a preferences matter?
It is impossible to do routine checking without continuously changing the view to fit in window (but in the next step the mess begins again)
A loss of time.

Ah, the old history: Adobe's staff do not use ID. Just Word.
BUT, it is something I can do: just purchase a dedicated script/plug-in and kindly send the invoice to Adobe, to be discounted from my monthly invoice.
In this second example the thing is really delirious. After the change is made ID jumps to an absurd place of the page. Cannot believe it. Many years suffering this!
No more ipse lorum. Better:
Quo usque tandem abutere, Adobe, patientia nostra
Thanks.

Similar Messages

Can't see the whole spread

Hi,
I working in an InDesign document that
has four pages (two spreads)
For the first two pages (spread), I'm able to see
everything. However, on the second spread I was able to see
the whole thing for awhile by either by zooming out or moving
my cursor up down or to the side with the space bar held down. However,
suddenly that's not working. I can't even scroll down using the scroll bar past the top half of the
second spread unless I'm zoomed out to the point where I can't read
the text.
I've tried Fit Page in Window and Fit Spread In Window and that
doesn't work either. What's going on?
Thanks.

Thanks Peter. Wasn't successful with the preferences, but restarting InDesign did the trick.
However, now the type is acting funny. It should be regular black but it's fading from
black to white. I've attached a screenshot.
Think this is related to the preferences?
How do you quit and relaunch InDesign in the manner
you describe in the resetting your prefs intructions? Is
there a way to do that automatically like you in restarting
your computer. Or do you need to quit and then re-open it
while holding down command, shift, control and option?
Thanks.

I have Adove Reader XI. All my files have a picture as the first page. I used to be able to see the picture for each file. Now all I see is the PDF logo. How can I change this so I can see the pictures instead of the logo?

I have Adobe Reader XI. All my files have a picture on the first page. I used to be able to see that picture but now I can only see the PDF logo. How can I change that so I can see the pictures instead of the logo?

Windows 7

How can I see the whole week with calendar built-in app ?

How can I see the whole week with calendar built-in app ? My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

What you see is what is available.
Turning the iPhone into landscape mode with Month, Day, or List view selected provides the closest thing to seeing an entire week.

HT201272 How can I see the whole week with calendar built-in app ?

How can I see the whole week with calendar built-in app ? My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

You have posted in the itunes store forum. This has nothing to do with the itunes store.

I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
Thanks.

Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
If possible, please try Indesign CS 4.

How do I see the whole menu width?

In Encore CS4, when I build a menu in 1440 x 1080 16:9, the window in the center of the screen only shows it as 4:3.
I know there is a little slider button so you can move the picture from side to side, and I know you can Preview it, but I want to see the whole 16:9 picture as I work on it, so I can judge the proportions. Is there any way of doing this?

Hey Tim. Is it maybe just the fact that you do not have pixel aspect correction ON within the menu viewer? I do not normally work with 1440x1080 (1.33 PAR) menus or footage, but a quick test came up with the results below (CS5). I created the menu in Photoshop using the Film & Video > HDV1080p/29.97 preset.
Toggling this button will make Encore display it as square pixels so you can see the full 16x9 menu stretched out how it will be in the end. This is just a representation of what the menu will look like when it is stretched out, so text and graphics will not necessarily look great. I also usually click on a percentage like 50 or 100. Having it set to "Fit" makes weird things happen around the edges and can be annoying to work with.

How to see the whole file names in finder column view?

Hi guys,
I like to use finder in column view. However, most of the times, the file names get trunked and I have to redim the column to see the whole names. Other day, without wanting to, I must have pressed some key combination, and the column got redim automatically, so I could read the whole file names. So, my question is if does anybody know how to achieve this?

I don't know what "redim" means, but if you double-click the column separator, it becomes wide enough for the longest name. If you Option-double-click it, all columns become wide enough for the longest name in each column.

HT201322 How come i cant see the hide buttom in my iphone?

How come i cant see the hide buttom in my iphone?
i swipe the item again and again, but nothing comes out, just cant see the hide button......the instuction works in itunes, but in iphone

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

How to see the whole score ?

What setting is needed to be selected to see the whole score in page view ? I use to work for me in logic 8 ? I dont know what has changed in L9 ?

I don't know what "n" or CMD-3 do (I don't use stock Logic key commands). That aside, try this:
• close all existing score editor windows
• select the regions you want to see in a full score
• open the score editor
That should give you a full score display of the instruments used for those regions. But if you don't see what you expected, chances are that the score editor is showing you a previously saved score set.

How to create and see the user interface of helloworld sample??

hello friends,
i have deployed the hello world sample
now i want to know how to create and see the user interface of hello world sample.
thanks and regards..

If you go to bpel console host:port/BPELConsole (in a dev install, localhost:9700), click on your process, we will generate, based on the describing wsdl a UI for you ..
hth clemens

How to get to see the usernames and passwords for wifi logins on iPad

How to get to see the usernames and passwords for wifi logins on iPad.

You can't access that on an iPad. The iPad does not have a Keychain Access type app like the Mac has. Maybe an application like iExplorer on your Mac will let you see them, but you can't see them on the iPad itself.

How can I see the whole day in day view without scrolling?

I'm using iCal 4.0.4 on my MacBook. I'd like to see the whole day of events without having to scroll down. Right now I can only see about 5 hours at a time. I've set the day to start at 8am to midnight. Is there a way to see 12-16 hours at a time with no scrolling?

Hi,
Go to iCal > Preferences General. If I remember correctly there should be a "Show XX hours at a time" option there. There certainly is in version 6.0.
Best wishes
John M

When using faces, how do I see the whole photo?

Frequently when reviewing unnamed faces, I would like to see the whole photo to see the context in which the face appears. Is there a way to do it?

Are you in Faces View? There should be buttons on the bottom edge of the Browser to switch from the Face to the whole photo.
See this page in the User Manual:
As the number of confirmed images of a person grows, it can be difficult to identify a person’s face in a small thumbnail image. To make it easier to identify a person’s face in an image, you can either make the thumbnail images larger or switch from showing whole images to showing only faces.
To make the thumbnail images larger
In the Faces browser, drag the Thumbnail Resize slider to the right.
To show faces only
In the Faces browser, click the Faces button.
Each thumbnail image in the Faces browser is cropped to show only the person’s face.
To show whole images
In the Faces browser, click the Photos button.
The thumbnail images in the Faces browser return to displaying whole images.

Why can't I see the whole image?

I can not see the whole image in the viewing area. All I get is a partial rectangular section, with the rest being either white, or checkerboard. It doesn't matter what size the image is, nor how many layers, or even whether I use the 32 or 64 bit versions of the software. I even have the same problem when I create a new image from scratch. It doesn't matter whether I reboot the system either.
I am using Windows Vista, on a two year old machine, but it does have a powerful processor, and 4GB of RAM. I've checked the system resources, and the CPU is only 25% occupied with 2GB or RAM to spare... so what gives?

You need an updated display driver.
Go to the web site of the maker of your video card (not Microsoft), and locate their current release for your hardware and OS. Download and install, and it will almost certainly solve this issue.
-Noel

F/change: how enable it to see the whole spread?

Similar Messages

Maybe you are looking for