F-secure can't start scan no scanengines loaded. Error with security. Restart your pc.

Since a few weeks the F-Secure program is not working like it should. I want to protect my pc but now i can't do that. I have made a fsdiag file but I dont know how to add it in this message.

Hello, Possibly the product was installed with the non-default "Offload scanning agent" option turned on by a curious sysadmin, even though the customer has no additional licence for F-Secure SRS appliance and the environment is not virtualized. If so, you will need to re-install F-Secure protection with the "Offload scanning agent" line unticked. Best Regards: Tamas Feher, Hungary.

Similar Messages

  • Why do I get an alert saying "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. How can I solve it??

    The full alert is " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features."
    This is just started three/four days ago. I need assistance quickly as I can't access any secure sites e.g bank accounts/homepage etc.

    See [[Could not initialize the browser security component]]

  • I keep getting this diologue box as I start up Firefox "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. ... what should I do exactly?

    I keep getting the following dialogue box when I start Firefox " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions." I am not sure how to find or change the profile directory. I have gone to the Options: General: Save files to ...box but it wont allow me to browse to another file and the box remains blank. ideas please!

    See [[Could not initialize the browser security component]]
    Continue here: [/questions/780717]

  • How can I start using IPad without first syncing with my computer?

    I'm out of town and just bought a new IPad2.  I don't have my computer with me and won't be able to use it for another 2 weeks.  How can I start using my IPad before syncing with my computer? 

    You must activate it by syncing it to iTunes on a computer. An Apple Store can do it for you - or anybody with a computer that meets the minimum requirements and has iTunes 10.2 on it can activate it for you.
    If you have someone else activate it, bear in mind that when you do finally sync to your computer, iTunes is going to tell you that all content will be erased because you already set it up on another computer with another iTunes library. Your iPad will sync to one iTunes library only. That is way they are designed to perform.
    You CAN transfer any purchases that you make on the iPad to your iTunes library when you perform your first sync with your own computer, however, and I would strongly suggest that you do that when you get the chance.
    If you do set it up with another computer, I would keep the purchases and downloads to a minimum so that keeping all of your data is not a big problem when you finally sync to your own PC.

  • I can't start Muse, Photoshop or InDesign, error "can't find entreepoint (toegangspunt)"

    I can't start Muse, Photoshop or InDesign, error "can't find entreepoint (toegangspunt)"

    Nobody can tell you anything without proper system info or other technical details. Entry point errors are system errors with missing libraries (DLL/ Dylib) or "bad" drivers down to incompatible processors.
    Mylenium

  • Datafinder can't start due to an internal error.

    After installing LabVIEW 2009SP1 and DIAdem, I get the following popup every time I restart the computer:
    "The datafinder can't start due to an internal error. (244) Please wait until the National Instruments PSP Service is running and try starting Datafinder again."
    I'm not very familiar with the NI PSP Service or how to get it running. I tried to repair the LabVIEW installation but no luck.
    Has anyone seen this before?

    Hi West,
    It's probably a corrupted install of the distributed systems manager. You can uninstall it and reinstall it by downloading it here (http://www.ni.com/download/ni-distributed-system-m​anager-2013/4216/en/). 
    Regards,
    Basil
    Applications Engineering
    National Instruments

  • I am running Windows 8.1 on desktop.  When I exit Photoshop Elements 12, I can not start program again unless I do a computer restart.  What gives?

    I am running Windows 8.1 on desktop.  When I exit Photoshop Elements 12, I can not start program again unless I do a computer restart.  How can I fix this?

    Hi,
    Occasionally, the Welcome screen leaves a process running which prevents the second attempt to start the organizer or editor.
    There is no fix but the workaround is to create shortcuts direct to the applications and use them each time.
    Create shortcuts pointing to the following files:-
    Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
    Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    Please let us know if they work.
    Good luck
    Brian

  • The program can't start because BCM-4.0.dll is missing from your computer

    Hi
    When I am trying to open the dashboard from Citrix server i am getting an error message: "The program can't start because BCM-4.0.dll is missing from your computer.'
    BO 4.0
    CMS Database : Oracle 11g
    Reporting Database : Oracle, Teradata, SQL Server
    Tomcat Apps server.
    OS: Linux.
    Please help to fix this issue.
    Thanks
    Naveen

    Has the issue been resolved? Dashboard Design 4.0 has been release (GA
    issue continues for us " This application has failed to start because BCM-4-0.dll was not found. Re-installing the application may fix the problem"
    Windows 2003 32 bit, Citrix Xen App 4.5, Dash Board Design 4.0

  • TS3694 Please help iphone can't start up,the masage say error 1611.can you show me how to fix this .Thak you

    Please help iphone can't start up,the masage say error 1611.can you show me how to fix this .Thank you

    My iphone can't start on the screen say itune ,I go to itune try restore but the massage say error 1611.
    Mobile device not sevice.when i turn omy iphone it can't statr but only the Apple picture show on screen.can you guy try help me Please.Thank you

  • New WIN7 System, FFox gives error "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory" - will not go to any site.

    New Windows 7 computer. After installing Firefox, every time I bring it up I get the following message:
    "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
    Then Firefox comes up, but will not function at all - can enter url address, but will not respond to ANY clicks, so can not go to any site.

    This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

    When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
    == This happened ==
    Every time Firefox opened
    == Two days ago, for no apparent reason.

    In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
    Open Finder and use one of these:
    * Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
    * Open the "Go" menu and hold down the Option key to make the Library appear
    You can also use this command in a Terminal window to remove the hidden flag.
    * Mac HD > Applications > Utilities > Terminal
    * chflags nohidden ~/Library

  • When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error.

    When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error. This occured after my macbook pro shut down (because of low battery) while it was installing some updates. Please Help?

    Try reinstalling OS X. What version did you have installed? If it's Snow Leopard do this:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

    I suddenly encounter this error message from Fire Fox.
    Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
    I uninstalled the browser and download a new version but it does not resolve the issue.
    I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
    == This happened ==
    Every time Firefox opened
    == After something about security add-on of Norton pop up by itself. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

    This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • This message [Ubuntu repositories or Mozilla download: " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory....

    Ubuntu 11.04: I have been getting this message whenever I install Firefox from the repositories and downloading the tar file. I cannot use Firefox! " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."Firefox does not respond to any addresses or a google search. Indeed it responds to nothing. There is no Profile folder!

    Uninstalling Firefox on Linux
    * http://kb.mozillazine.org/Uninstalling_Firefox#On_Linux
    * http://kb.mozillazine.org/Installation_directory#Linux
    * Removing user profile data - http://kb.mozillazine.org/Uninstalling_Firefox#Removing_user_profile_data
    After all is done, Restart your system.
    Installing Firefox on Linux
    * https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Linux
    Check and tell if its working.

  • My mac has started displaying a message stating "You need to restart your computer".  Web says it's kind of kernel panic! Is this a hardware problem? Do i need to contact my distributor? please help..it annoys me very much..

    My mac has started displaying a message stating "You need to restart your computer".  Web says it's kind of kernel panic! Is this a hardware problem? Do i need to contact my distributor? please help..it annoys me very much..

    Hello welcome to the ASC user to user forums
    please see these support documents
    http://support.apple.com/kb/TS2570
    http://support.apple.com/kb/TS1440
    http://support.apple.com/kb/HT1455
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/HT1379
    http://support.apple.com/kb/ht1379
    http://support.apple.com/kb/HT1509

Maybe you are looking for