F-Secure SAFE installer will not execute (Windows 10)

I just combated through Windows 10 upgrade from Windows 7 (64bit). However, now after upgrading F-Secure SAFE installer that I downloaded from mysafe-portal, will not execute. It simply appears to be doing nothing. Download looks successful and I re-downloaded the installer as well. What to do? Suggestions?

Yes, I did reboot Will the uninstall tool work for Windows 10 as well? It is not mentioned, or I am blind I will try it though.. The story is that I first started Win10 upgrade without removing anything. Then I ended up in a situation where explorer.exe crashed right after login. After some struggling with task manager and command line without being able to fix the crash, I reverted back to Windows 7. While back in Windows 7, I uninstalled F-Secure and some other software I thought might affect and re-upgraded. Then Windows 10 appeared to be working like a charm. Now, back in Windows 10, I installed my Dropbox app and then have been trying to re-install F-Secure SAFE. Thanks for all tips and ideas.

Similar Messages

Service stack update 2871777 to enable installation of RDP Connection Broker on 2012 domain controller - downloaded file will not execute.

service stack update 2871777 to enable installation of RDP Connection Broker on 2012 domain controller - downloaded file will not execute.
Downloaded x64 update for server 2012 R2 (KB2871777) - file downloaded is named Windows8-RT-KB2871777-x64.msu
When downloaded to server 2012 R2, upon launching the files, the message reads "Windows Update Standalone Installer"
"The update is not applicable t your computer"
If this is the wrong update please point me to the correct one - I cannot find another instance of this update anywhere.
I am unable to remove the active directory from this server, so I need to use this fix if at all possible, in order to use RDP.
I have tried every workaround I can find. The goal is to have remote users access RDP to run a remote session and access apps and files
on the server. we have Hyper-V enabled and have successfully deployed 10 RDP licenses to the license server) also on the PDC.
I read one post that suggested installing RD Connection Broker in one instance of a VM and AD DS in the other - not sure if that means we remove
AD DS from physical server. We only have one 2012 server (plus a server 2008 with Ad DS) and a server 2003. Trying to make this all work so we can deploy 10 remote desktop users.

KB2871777 appears to be for 2012 (non R2) only.
As to the other problem maybe this one helps.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Oracle Universal Installer will not load on Window 2000

I cannot load the Oracle Universall Installer on a new
Dell computer with pre-loaded Windows 2000 software. The setup.exe program will not execute. Any suggestions?

Thank you, I thought the problem was specific to Windows 2000,
but it Pentium 4 processors. Here is a reply I found from
Nick Chernick. We will try it out as soon as possible.
1. Create a temporary directory on your server.
2. Copy the contents of the Oracle RDBMS CD to the temporary directory created in step 1.
3. Search the directory structure created in step 1 for the existence of the filename symcjit.dll.
4. Rename each copy of the symcjit.dll to symcjit.old.
5. Run the setup.exe from the \install\win32 directory and install Oracle 8.1.x.

Windows 7 installation will not recognise the Bootcamp disc!

I have a 2008 Macbook running Snow leopard.
Installed Win 7 via bootcamp but when I insert the Mac Snow Leopard disc to install the Bootcamp drivers etc after the Win 7 install has succeeded, the Windows 7 installation will not recognise the disc!
Any ideas
Thanks in advance

If you used your Leopard DVD then it won't work.
As ScuseMe said only the OSX Snow Leopard DVD contains the drivers for Windows 7.
Stefan

K7N2G will not load windows xp with any type of dvd/cd drive installed?

This is on my old computer, the specs are as follows
k7n2g
athlon 2600+
radeon 9700 pro
Caviar SE wd800
1gb samsung ddr333
It does not matter if it is keyed as master or slave, primary or secondary my old k7n2g will not load windows with a cd drive installed. I have tried three different drives and everything that I can think of, changed cables, channels, drives, everything. Windows just hangs. I cannot even get into safe mode. Is this an IRQ problem? The drives keeps trying to eject themselves, no matter what kind I use. This has never happened before, but there was a point before this problem where the vga wouldn't kick on (at the login screen) until I hit eject on the cd drive. This is driving me crazy and I have a girlfriend who just has to play her stupid sims and will not stop bothering me about it. PLEASE PLEASE PLEASE help me!
Thanks
Chris
PS here is my NEW workstation (I couldn't be happier to get rid of the old system)
two Opteron 250 90nm
2gb 2-3-2-6 Corsair Reg/ECC DDR 400
Tyan Thunder K8WE
1x BFG 7800GTX OC (one for now)
Audigy 4 Pro
Seagate Cheetah U160 10k 73.4 gb
Atlas V U160 18.3 gb
Lite on Dual Layer burner

Your Tyan based hardware listing on the first post has no relevance to anything, and might only serve to confuse. Please remove it and put the hardware you are trying to troubleshoot in a signature. Look in your profile>Forum Profile Information and enter that in the Signature box. That way we wont have to scroll to hunt down your hardware specs
So let us get this straight.
This system used to work fine? Yes? Then what prompted you to reload the OS?
You mentioned that didn't happen when you owned it. Are we to assume that at some point you sold or gave parts of this system to someone else? If so, what changed?
A little more history might prove useful in helping us to give you better suggestions.
Look at the PSU and give the Amps for the +3.3, +5v, & +12v lines.
***Edit, from what I see on the net, that is a dual rail PSU and the amps are as follows:
+3.3V@22A, +5V@21A, +12V1@18A, +12V2@16A
Is this correct?
Both the 3.3 and +5v seem a little low to me, but I am not entirely convinced that would be your problem. However, the fact that the 12v rails are split, can lead to other problems such as overvoltage protection circuitry getting in the way. Especially if the 16amp 12v rail is overloaded.
This is something to consider. Just because it is supposedly capable of wattage over it's rated power output doesn't mean it can handle what you're throwing at it all at once. If you have a single rail PSU that has at least 18 amps on the 12v rail to test with, we could almost definitively rule out power as the sole problem or a contributing factor.
I have never had a CD rejected, but if you could be more detailed about what you have connected to the board while attempting to load the OS, and then a detailed description of at what point the OS installation fails, and the CD is ejected, that would be helpful as well.
The fact that you've tried several drives, cables, with the same result. And also had a blackscreen event, does point to at least one problem that could point to a power issue. The CD rejection issue is foreign to me since I usually use the same type of PSU in all my builds or ones that I know work with a particular set of hardware, so I can't attribut that to a power issue.
Did you try clearing the CMOS and then initialize the default settings?
Do you have a cheap AGP card to try instead of the 9700?

Norton says flash player 11 is not safe and will not let me download it. What do you say?

Norton says flash player 11 is not safe and will not let me download it. What do you say?

Norton is notorious for false positives. Update your virus definitions, and make sure you only download updates from the adobe.com website.
Alternate download: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header

HP installer will not detect networked LaserJet MFP M1536dnf just on some PCs

Hello,
this printer/scanner was working fine (printer still works fine via a Windows print server). Then scanning (via network) stopped working on one PC (Windows 7).
Tried to uninstall drivers / HP software and reboot. Then tried to install again - HP Installer will not detect printer on the network no matter what. I can ping the IP of this printer, access its web interface without any issues on the same PC. Tried specifying IP address in the installer - does not detect, the same issue with MAC address.
Had a Windows 8 machine with drivers / software installed on it, tested - scanning still worked fine on that PC. Tried to remove HP software to see if problem will appear. And it did! I cannot install the same software package which I still had in downloads - it will NOT detect the printer on network.
Upgraded printer firmware - no change, even though I don't expect this to be a printer issue as it worked fine until I have uninstalled software on this W8 machine.
Tried using HP Scan & Print doctor. That thing doesn't see printer/scanner installed and only suggest to download and install software which is not helpfull at all.
I also tried extracting HP installation files and finding *.inf files which could be used to add scanner via Windows directly, but haven't succeded with that (I would also be not sure how to specify network IP address in such a case anyway).
Any help is MUCH appreciated. We are kind of stuck...
Thanks!

Hi,
Run some diagnostics and see if any issues are discovered.
There have been reported issues with the NVIDIA 650 with some of the HP PCs. Additionally, most models of the NVIDIA 650 require a 400 watt power supply as the minimum and some models require a PCI six (6) pin power connector which the 300 watt power supply in your PC is not provisioned.
There is a BIOS update posted for your PC so you might want to consider installing that update.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

I just purchased Adobe Photoshop Elements 13 but my computer is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption

I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Installation will not accept my serial number to install Adobe 8

I have a Dell XPS M1530, laptop. I installed Adobe Photoshop Elements 8 on my computer in March, and the program worked correctly. I had Windows Vista on my computer. I just did a clean installation of Windows 7 to replace Vista. I cannot reinstall Adobe Photoshop Elements 8 because Adobe installation will not accept my serial number. Adobe tech support tells me my serial number is for version 6.0 of Adobe Photoshop, and Adobe no longer supports version 6.0..Please give me advice on how to install.

To: Ankush Ved
Your company told him it was for 6.

Sound card Installer will not launch

Hello folks,
I've downloaded & tried to install a Roland UA-1EX USB sound card driver for OS 9 and the installer will not launch.
I already use the unit with OSX.
Usually these are VISE installers with a blue icon but this one decompresses into a white generic document.
I have had exchanges with technical support & whilst being helpful he swears the file is ok.
I used Filetyper to look at the file to see if I could correct the filetype & tried comparing to other similar installers but with no success.
I have a ResEdit to but don't know how to use it.
I went to the ftp site & downloaded it from there as opposed to the support site, still no joy.
I've tried different ways of decompressing & checked on my other computers but I can't get it to launch.
I get the feeling he is not actually loading it up on an OS machine but I haven't come out & said it...
Can anyone help?
here's a screenshot of the windows...
http://www.swampnet.demon.co.uk/pix1/installer_problem.png
Cheers,
Steve

I found that download off a link on this page:
http://www.rolandus.com/products/productdetails.php?ProductId=743
It is full of warnings that it cannot be used or installed under Classic.
I must also give you the usual warning that any Mac software (Applications and some other files) unpacked on a PC will be damaged beyond repair. Final unpacking MUST be done on a Mac.
When I unpack the .sit file, I get an Installer vise 3.6 Lite Installer file, plus the other files shown in your windows. They do not have blank Icons.
Have you tried rebuilding the OS 9 Desktop File lately ? (Hold down Command and Option when the Finder is starting up.) This sometimes solves such problems.

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

Hi
Secure Zone login feature will only work if you host your website with Business catalyst.
Please take a look to this as an alternative
Password Protect Pages Widget for Adobe Muse
Also, check this thread,
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

I have the right serial number to install arabic onto Ai, but the installer will not accept the serial number

I have the right serial number to install arabic onto Ai, but the installer will not accept the serial number

I'm also getting the "invalid serial number", but I'm wanting to upgrade my 5.1 to 5.1.4 to take advantage of HDV 720p/24 support. Is the 5.1.4 update even an option still? I really don't want to be forced to upgrade to FCS2 and shell out $500, just to get this one feature that was included in a patch.
I went to the Registration page and it actually allowed me to register the serial number... (which I'm pretty sure I already had), but it still won't let me in to download any updates. Also, the email confirmation that was supposed to be sent has not arrived 20+ minutes later.
Very strange. I called Apple support and they estimated a wait time of 15 mins... ugh.
Anyone have other suggestions?

I retrieved my serial number for Acrobat 8 Standard from Adobe because my system crashed. I went to the downloads and can only retrieve Acrobat 8 Pro. The installer will not take my serial number what can I do?

I retrieved my serial number for Acrobat 8 Standard from Adobe because my system crashed. I went to the downloads and can only retrieve Acrobat 8 Pro. The installer will not take my serial number what can I do?

Hi floyd99,
You can download Acrobat 8 Standard from : https://files.acrobat.com/a/preview/80aa8c58-2951-494e-808a-fb61a6b4aa29
Reagrds,
Rave

PSE 12 Installer will not initialize

So, downloaded PSE 12 without problem.
Run the installer and get the "installer will not initialize" message.
Running MAC OS 10.9 on Macbook Pro.
No log created to tell me what has happened.

Hi SteveB_MK,
Please steps mention in given link below and let us know if it helps you:-
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html
Regards,
Sarika

Mountain Lion installer will not let me choose my Lion Partition as an install location

Mountain Lion installer will not let me choose my Lion Partition as an install location.
Any ideas why?

Again, why will the Mountain Lion installer not allow me to select my Lion partition as the location for the install?
Good question. That's the main way it's supposed to be installed. You shouldn't even need to choose a partition. You purchase Mountain Lion through the App Store, it downloads to the Applications folder and automatically begins the installation on the drive where Lion or Snow Leopard resides as soon as the download is complete.

F-Secure SAFE installer will not execute (Windows 10)

Similar Messages

Maybe you are looking for