F-Spot Error (Solved)

I know I have posted this else where but I got no response, so I decided to post it here in stead.
When I launch F-Spot I get the following error: -
F-Spot Encountered a Fatal Error
F-Spot cannot find the Dbus session bus. Make sure dbus is configured correctly or start a new session for f-spot using "dbus-launch f-spot"
I have issued the command it gives in the error and the same error crops up.
Any ideas?
Cheers
EmyrB
Last edited by EmyrB (2008-04-13 17:29:39)

Sorry guys for the long delay, I have been away.
Misfit138 I ran pacman -Qi dbus and I have dbus installed version 1.0.2-4.
Zerathidune, I ran your code and fspot worked, so I checked my rc.conf and I had dbus after hal, so I have put dbus before hal. I rebooted and checked fspot and it worked.
Many thanks guys

Similar Messages

Solver error: Solver quit unexpectedly. Click reopen to open the application again. This report will be sent to Apple automatically. I've tried restarting, reopening. Ideas?

Tried opening up Solver for the first time on my new macair book. I'm getting the error: Solver quit unexpectedly. Clieck reopen to open the application again. This report will be sent to Apple automatically. I've tried restarting, reopening. Ideas?

Just found the answer to my own question!

I HAVE HP LASER JET M1005MFP CAN WE SCAN DOCUMENT JPEG IMAGE ERROR SOLVE THIS PROBLUM

I HAVE HP LASER JET M1005MFP CAN WE SCAN DOCUMENT JPEG IMAGE ERROR SOLVE THIS PROBLUM

Hello Kaushik9
The product you have is a commercial printer. I suggest posting in the HP Business Support forum for a better chance at finding an answer.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Outlook Sync Error SOLVED - Multi-day repeating appointment cannot be converted for use on the Handheld...

*UPDATE 1/23/2009 07:08 AM* This is a partial fix. I no longer think the Recurrence Range is the culprit. It seems the Time Zones features between Outlook & Palm are not cooperating. This explains why my 12 am events are syncing as 6 pm the day before; I live in GMT-6:00 so it's moving my events ahead by 6 hours. Another event I set for 1 pm in Outlook was changed to 7 am on my Treo. I am going to start over and recreate each event, this time setting the Time Zones, which I hadn't done before. I tested it out and it worked with a single event... let's see how long it lasts. I've also found that using 'No Time' on my Treo is not compatible with Outlook. It's better to set a time with 0 minutes duration.
*UPDATE 1/23/2009 04:11 AM* This is a partial fix. My monthly and yearly problematic recurring events are now showing up at 6 pm the day before on my Treo, though my Outlook calendar is fine. I think this has to do with the Recurrence Range Start/End in Outlook, which is set automatically. If only there were a way to change this...
After a WHOLE LOTTA trial-and-error (like 3 days worth), I think I finally solved my OLERR:14-001 issue!
Problem: Syncing Palm Treo 755p calendar with Outlook 2007
Error Message (simplified):
HotSync session completed with messages on [date] [time]
HotSync session started on [date] [time], and completed in [0] seconds
Outlook Calendar synchronization completed with messages
Duration: [0] seconds
Outlook Calendar
The multi-day repeating appointment titled [event] beginning [date] [time] cannot be converted for use on the Handheld. Please divide the appointment up into single-days and re-synchronize.
OLERR:14-0001
- Desktop overwrite HH Sync
Note: You will likely have several of these ‘Multi-day’ instances in your hotsync log (I had 58). You may want to change Calendar in hotsync to "Desktop overwrites Handheld" after you get this error, to avoid erasing events while you are fixing this issue. Otherwise, you may have to restore them from a backup copy (if you have one) and start over. You can switch back once you’re through.
Solution: First, I tried this Palm KB Article: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=31167. After this didn’t work for me… I did trial-and-error. I believe the problem is that each recurring event, which you set up as ‘All-day’, must be changed to have a duration of 0 minutes from within Outlook. I was able to change some events directly, but I found that some of the records had corrupted, and would just revert. My fool-proof solution was to recreate EVERY problematic event (yes, one-by-one) using the following steps:
Open Outlook
Go to your default calendar, where your events are synced
In the top menu choose ‘View’ > ‘Current View’ > ‘Recurring Appointments’
Open a ‘New Appointment’
Enter subject and other options, such as Categorize, Importance, Time Zones, or Reminder
Make sure starting and ending date & time are the EXACT same
Select ‘Recurrence’ & choose your pattern
I did not choose ‘No end date’ (hence the Palm article), but rather ‘End by:’ and typed in 2031, then pressed tab to auto-generate a suitable end date. I chose 2031 because that is last year my Treo’s calendar goes to. Click OK
Repeat for every event in your error log, until you get a clean "Desktop overwrites Handheld" hotsync (Outlook should be closed when you sync)
Switch Calendar in hotsync back to "Synchronize"
Even though I still get the message OLERR14:001, my syncs are successful. Now I will give my Treo time to see if the issue returns later. Until then, happy Outlook syncing and good luck!
Post relates to: Treo 755p (Sprint)
Message Edited by akeaw3000 on 01-23-2009 04:11 AM
Message Edited by akeaw3000 on 01-23-2009 07:08 AM

hello,
if all of your data is on the phone you can change the sync action to handhled overwrites desktop
how to:
open palm desktop software
on the top left click on 'hotsync' and then 'custom'
on the calendar conduit
highlight it and click on 'change'
then choose 'handhled overwrites desktop'
hope this will help you
Post relates to: Palm TX

DVD burn error - SOLVED!

I recently had errors when burning DVDs and noticed many people on this forum shared the exact same problem, but no solutions were posted. However, I've recently solved it, and decided to make a whole new thread so that it is easier for people to find.
First of all, the error is this: Since owning my laptop I've done 1 or 2 successful DVD burns, but then suddenly it wouldn't do it anymore. It would begin but then fail, somtimes at around 42%, other times before it got to 1%. and this happened no matter what software was used. I tried Finder and Toast 8. The error codes output from Toast are as follows:
The drive reported an error:
Sense Key = HARDWARE ERROR
Sense Code = 0x03, 0x01
http://www.bilious.org/filez/forums/Apple/Drive%20Error%2001a.png
Followed by:
Sense Key = ILLEGAL REQUEST
Sense Code = 0x30, 0x05
CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
http://www.bilious.org/filez/forums/Apple/Drive%20Error%2001b.png
(Thankyou to user: billious, for the images)
The error code you get from Finder is 0x80020022.
Now, the information about my system and my drive are as follows:
Apple MacBook (Intel Core Duo, 2Ghz) in white
MATSHITA DVD-R UJ-857:
Firmware Revision: HBE4
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Now, I know a lot of people here have said "Use highest quality DVDs, your cheap ones are bound to fail!" but in actual fact, it doesn't matter. People all across this forum have said that they've used the most expensive brand DVDs on the market, right down to the cheapest, and it's failed on all of them. Even the Apple brand ones. Here are a just a few that people have tried: TYG03 (Taiyo Yuden 1-12x DVD-R), TTH02 (TDK 1-16x DVD-R) and TDK003 (TDK 1-16x DVD+R). Taiyo Yuden are widely thought of as the highest quality on the market.
Also, I know people on this forum have said "Check the Mac is on a flat surface" and "Check the Mac is at a comfortable temperature". These may be factors, but it's very unlikely and are certainly not how I resolved the issue.
I took mine to my local Apple store and told them about the issue and they said they'd test it and if they found a fault, do whatever was needed. They tested and sure enough, it wouldn't burn so they decided to replace the DVD drive. I tried to tell them that loads of people on this forum said that doing that hadn't helped, but they weren't going to take our word for it, and so they replaced the drive. 2 days later I got a call to say they'd done it but it hadn't resolved the issue (fortunately they'd re-tested it and not just told me to come and collect it!) and so they decided to replace the motherboard. 2 days later they called to say the work was done and it was burning fine, and I can confirm that it now burns full DVDs successfully.
So there it is, a motherboard fault. I dont know why, perhaps a manufacturing error. Anyways, so if you're having this problem, go tell Apple to replace your motherboard (I believe you can send your laptop to them if there isn't a store near you).
Oh, and if you do this and it works (or if it doesn't) please post it here, as it will help keep this solution on the front page of the forum.

Hi Vai,
I'm quite pleased to read your post, I'll even forgive the linking to my error messages because the news is that good.
Any information whatsoever as to the actual repairs undertaken would be very much appreciated, as I am interested in twisting Apple Australia's arm over this issue - my DVD drive may as well not be there. Any information from the service receipt, or if your could contact the service staff for a specific description of the error and service method, I'd very much appreciate it.
Congrats on the repair, and now I've got five months to fight the machine that is Apple to see that my drive actually works.
Thanks.

"Cannot complete iTunes store request..." error solved

As posted elsewhere here, repeated clicking between "iPhone" and any other header such as "Music" or "Playlists" in the iTunes browser has solved this error message:
"Cannot complete iTunes store request - network connection was reset. Make sure your connection is active and try again."
After about 45 minutes I got the message: "Restoring iPhone from backup"
It is now sloowwly restoring my original iPhone (No usb 2.0 on the old PowerBook G4 400)
Hammered Apple servers = tried patience. Keep trying!

I don't know if this will help you guys, but it worked for me...
I've been having the exact same problem since upgrading to iTunes 9. Installed the recent update to 9.0.1.8 with no change--still no icons when the Store comes up, long vertical layout, 306 error when clicking on anything.
I'm on an older Windows box with XP installed, Safari 4.0.3, iTunes 9.0.1.8. I use Firefox for the web. Though it WAS installed, I had never used Safari on this machine. Went to take a look at Safari and see if there was anything wrong.
I found that Safari was NOT set up properly to get through my Firewall--again, I had never used it before. As soon as I got the internet settings right in Safari and made sure it could get to the web properly, I re-launched iTunes and lo and behold the Store worked properly. This was NOT a problem with iTunes 8. Apparently everything with Safari needs to be kosher before the iTunes 9 Store will work.
Maybe you all have done this already, but it immediately solved the problem for me. Hope this helps someone.

Acrobat Reader 9.5.1 'Internal Error' [solved]

Hello, everybody.
To come quickly to the point, here is the problem / issue (hopefully, in the most concise and useful formulation).
OS: openSUSE Linux 12.1 with kernel v. 3.1.10-1.9 and (just for the report - even if I don't think it matters) Qt libraries v. 4.7.4-19.6.1. I say I don't think it matters, because I've already experienced this very same issue with openSUSE 11.0 (kernel 2.6.25.5 and Qt 4.4.0, with Acrobat Reader 8.1.3).
Acrobat Reader v. 9.5.1 (the release included with the distro).
The issue: when I try to overwrite an existing PDF document (i.e.: save 'foo.pdf' OVER a pre-existing copy of 'foo.pdf') I systematically get caught into the sequence 'the document already exists. Do you want to overwrite it?' -> yes -> 'An internal error has occurred' -> the document can't be overwritten.
Attempts to fix: I've already tried - suspecting I had possibly missed something during the installation process - to change the permissions of the '.adobe' preferences folder under my /home directory by issuing the usual 'chown -R xxx:yyy .adobe' command: with no result.
Any idea about the possible causes and workarounds?
BTW, while I was trying to recover the exact information about the program's version in the 'Help -> about Adobe Reader' menu, I've stumbled into another issue (which looks very much like a bug): that is, the program freezes if I try to read the 'Credits' information by pushing the suitable button in the red 'Adobe Reader 9' banner. Possible causes and remedies (aside from upgrading to the most recent version)?
Thank you very much in advance
Mario Grilli
Message was edited by: jaygrey
Reason: solved

I add this one to my previous message, which solves the issue (and closes the thread).
The issue has been solved (on another system, though: that is, Fedora 17) by installing the original Acrobat Reader 9.5.1 from Adobe. With "original" I mean: not the .rpm archive enclosed in the OS DVD, but the one which can be downloaded directly from Adobe.
The method: one has to open a terminal and simply do the following:
# rpm -Uvh http://linuxdownload.adobe.com/adobe-release/adobe-release-i386-1.0-1.noarch.rpm
[as root] # yum install AdobeReader_enu
The version of Acrobat Reader which is installed by this method is complete with all the GTK suitable libraries: and actually works with no hassle, allowing to overwrite previous versions of the same file.
Now, however, I have to find some equivalent procedure under openSUSE: because it's a fact that even the AdbeRdr9.5.1-1_i486linux_enu.rpm file one usually downloads from here installs a copy of Acrobat Reader which shows the aforementioned issue, despite all the necessary graphical libraries being already installed in the system. Now, since this one is probably the .rpm archive a user finds in the main .rpm-based Linux distros, I add that it might be interesting if some Adobe engineer would try to dig a little deeper into this issue...

F-spot error connecting to camera

I've been accessing my digital cameras through gnome manually for a while now and deceided to give f-spot a try. When I launch it, then try to import with the USB camera connected, I get, "Error connecting to camera. Received error "could not lock the device" while connecting to camera."
I launched f-spot from the shell and here is the debug info:
$ f-spot
[Info 17:41:44.056] Initializing DBus
[Info 17:41:44.137] Initializing Mono.Addins
[Info 17:41:44.257] Starting new FSpot server
[Info 17:41:44.775] Starting BeagleService
[Info 17:41:44.775] Hack for gnome-settings-daemon engaged
newd - gnome-dev-harddisk - Mountpoint file:///media/D True True Harddrive
Harddrive
item ImportCommand+SourceItem
Testing gphoto path = usb:
PortInfo Universal Serial Bus, usb:
Error Lock: LibGPhoto2.GPhotoException: Could not lock the device
at LibGPhoto2.Error.CheckError (ErrorCode error) [0x00000]
at LibGPhoto2.Camera.Init (LibGPhoto2.Context context) [0x00000]
at GPhotoCamera.InitializeCamera () [0x00000]
at MainWindow.ImportCamera (System.String camera_device) [0x00000]
If I manually umount the camera I am able to use f-spot to import the photos. Is there a way to reslove this issue allowing gnome to mount the camera and allowing f-spot to access it?
Last edited by graysky (2009-04-27 21:50:50)

Still seem to be experiencing this. Now if the camera is mounted, and I point f-spot to it via an import, I get the following:
item ImportCommand+SourceItem
Testing gphoto path = usb:
PortInfo Universal Serial Bus, usb:
Error Lock: LibGPhoto2.GPhotoException: Could not lock the device
at LibGPhoto2.Error.CheckError (ErrorCode error) [0x00000]
at LibGPhoto2.Camera.Init (LibGPhoto2.Context context) [0x00000]
at GPhotoCamera.InitializeCamera () [0x00000]
at MainWindow.ImportCamera (System.String camera_device) [0x00000]
(f-spot:5675): Gdk-CRITICAL **: gdk_x11_atom_to_xatom_for_display: assertion `atom != GDK_NONE' failed
cleanup context
Again, if I umount the camera before attempting the import, everything just works.... Help is appreciated.
Last edited by graysky (2009-06-12 20:00:45)

Problems with java.lang.NoClassDefFound error *solved*

realising my stupidity I have solved the problem
I am quite new to java and I have been using the Java for Dummies book to help me to learn it. I decided to use the command line tools instead of an IDE and hadn't encountered any problems until recently. I took a break from learning Java after reaching the end of the book but have decided to come back to it. The problem now is that when I run my programs I get the following error:
Exception in thread "main" java.lang.NoClassDefFoundError: helloworld (wrong anme: HelloWorld)
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.access$000(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPriviledged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at sun.misc.Launcher$AppClassLoader.localClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
This occurs from a simple hello world program:
class HelloWorld
   public static void main(String[] args)
      System.out.println("Hello, World!");
}I have no idea what the problem is, although by looking at similar threads it would appear that it may be something to do with the classpath variables however I do not know much about this as I followed a tutorial on the internet to set the classpath up.
Edited by: this_is_phil on Jun 19, 2008 11:11 AM

this_is_phil wrote:
Exception in thread "main" java.lang.NoClassDefFoundError: helloworld (wrong anme: HelloWorld)This part of the error message means you typed in "helloworld" but the class that java found was named HelloWorld. In Java, those are different - java is case sensitive. It will work if you enter HelloWorld.

Burning error -Solved..in an roundabout way

I have made a recording of my school musical using my new Sony EX1. This camera produces files that have to be imported via XDCAM Transfer to convert to .mov files that Quicktime can read. I copied the files to an external drive and dragged them into iMovie 6HD. No problem viewing in QT7. Put project together but after export to iDVD it failed with an error message that meant I had a 90% finished DVD but it did not finish. I tried all the normal suggestions in iDVD of changing the settings. In total frustration I copied the files from the .mov clips to another Mac running QT10. It would not recognise the clips saying I was missing some codec????? I then copied the iMovie project over and it took some time as it was 61gb. However I then shared it with iDVD and have burned perfect DVDs??????
Problem solved but I have no idea as to why???? Any suggestions would be great, but this might help others if they have a similar problem.
Dave

Hi,
Is there any application running when this problem occures, msvcrt.dll file belongs to Microsoft C Runtime Library. Actually most problem like yours does not caused by this file. In most cases, system or other application crashed caused by other process.
Firstly, you can try to download and reinstall C++ library for test. If no use,I would like to suggest you following another that had similar problem with yours, then, following Andre's reply to collect this application crash log, after that, upload the
log file to your sharing space and share with us.
http://social.technet.microsoft.com/Forums/windows/en-US/7ca7e7ef-dc0c-4b8f-841e-e3bbd5f2dc01/skydriveexe-error-event-id-1000-faulting-application-name-skydriveexe?forum=w8itprogeneral
Roger Lu
TechNet Community Support

ENHANCEMENT SPOT ERROR- INTERESTING !!!

Dear All,
I am Enhancing the standard PR05 Tcode inside an include MP56TF90(Which updates the cluster and creates the Trip number) in a subroutine FORM update_cluster.
I have to insert some lines of code before the statement : DATA: p_return TYPE i.(Which means before update_te_cluster.)
And, Some lines of code after the cluster is updated, trip created ie after MESSAGE s185 WITH te-key-reinr.
Thanks to SAP that it has provided implicit enhancement points at both these points.
I successfully created 2 enhancement implementations at these 2 points are included my code at the 2 respective positions.
Now, I have an IF condition in the upper part_.If the condition is met, then the cluster should not be updated_ and hence before DATA: p_return TYPE i. I am putting an ELSE statement and the first enhancement implementation end here after ELSE.
If the condition is not met, then the cluster needs to be updated after ELSE statement and thereyby I am putting the ENDIF statement at the ned of the 2nd enhacement implementation ie., before ENDFORM. "update_cluster.
As the IF and ENDIF are present in 2 different enhancement implemetations, the system gives an error as follows:-
+In the coding for a non-static enhancement and for a non-static ENHANCEMENT-SECTION, the control structures (IF, CASE) must be closed...+
*And, I have no Option but to do it as above to meet the customer requirement ...ie., If SUPPOSE I do ENDIF in the first part only and remove the endif from 2nd part, then the condition is ofcourse being met but the control comes down and updates the cluster as well (WHICH SHOULD NOT HAPPEN !)*
Any comments on this piece ?
I hope my Q is clear .. If not I will post the code next time.. (As the Question is too big )
-Anwar ...
Edited by: Sameer Anwar on Feb 8, 2011 8:05 AM
Edited by: Sameer Anwar on Feb 8, 2011 8:08 AM
Edited by: Sameer Anwar on Feb 8, 2011 8:09 AM

Hi Roby,
Once the interface for an enhancement spot is created you have to delete it completely as some part of it would still exist if you just delete it from se24 or se18.
the classes which actually implements the interface or enhancement spot / implementations at times are left and thats why when you create it again it will not ask you for Package assignment if you will observe.
So i will suggest to try checking the Spot components from se80 transaction and delete it completely. Also check if the entry still exists in tadir table which i am sure will be there even after you delete as i also encountered the same issue once.
Thats why i suggested you to create it with a new name for E-spot and interface too and check otherwise may be change the tadir entry as well.
Hope this helps.
regards,
Vikas
<b>Always reward points to useful suggestions.</b>

CS4 Fireworks on win7 "internal error" solved

Just to let everyone know, that deleting the Fireworks CS4 "roaming app" data solved the "internal error problems" for us...
Its in the user data folder.

It didn't work for me. I'm still with the same error.
I'm using Windows 7 ultimate and a Master collection CS4... All programs are working well, only fireworks insist with this.
Can anyone help me?
Thx

Package build error [SOLVED]

Hi there.
I am trying to build a pkg (nitrogen) from AUR using ABS. All the dependancies are installed, however i get an error from the configure script.
the makepkg output is :
==> Making package: nitrogen 1.0_rc2-1 (Thu May 18 12:56:43 UTC 2006)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Using local copy of nitrogen-1.0-rc2.tar.gz
==> Validating source files with MD5sums
nitrogen-1.0-rc2.tar.gz ... Passed
==> Extracting Sources...
==> tar --use-compress-program=gzip -xf nitrogen-1.0-rc2.tar.gz
==> Removing existing pkg/ directory...
==> Starting build()...
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... ccache gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether ccache gcc accepts -g... yes
checking for ccache gcc option to accept ANSI C... none needed
checking dependency style of ccache gcc... gcc3
checking for library containing strerror... none required
checking how to run the C preprocessor... ccache cpp
checking for egrep... grep -E
checking for ANSI C header files... yes
./configure: line 3450: ++: command not found
checking whether we are using the GNU C++ compiler... yes
checking whether ccache g++ accepts -g... yes
checking dependency style of ccache g++... gcc3
checking for ranlib... ranlib
checking for a BSD-compatible install... /bin/install -c
checking how to run the C++ preprocessor... ccache g++ -E
checking for ANSI C header files... (cached) yes
checking for pkg-config... /usr/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GLIB2... configure: error: Package requirements (glib-2.0 >= 2.6.0) were not met:
No package 'glib-2.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables GLIB2_CFLAGS
and GLIB2_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
make: *** No targets specified and no makefile found. Stop.
==> ERROR: Build Failed. Aborting...
glib2 is also installed on the system.
Any ideas why this happens?
Thanks in advance.

Ok i solved it. I had to install pkg-config in /usr and not in the default /usr/local

Error solving sql

Msg 1767, Level 16, State 0, Line 1
Foreign key 'FK_thiru' references invalid table 'pice'.
Msg 1750, Level 16, State 0, Line 1
Could not create constraint. See previous errors.
that is my sql error
my query below
/*cottage Table */
create table cottage
cottage_ID varchar (50),
invoice_ID varchar (50),
booking_ID varchar (50),
cottageName char (50),
phoneNumber varchar (50),
Email char (50),
postAddress char (50),
streetAddress char (50),
city char(50),
country char (50),
primary key (cottage_ID))
select *from cottage
/* client */
create table client
client_ID varchar (50),
booking_ID varchar (50),
client_firstName char (50),
client_LastName char (50),
phoneNumber varchar (10),
Email char (50),
postAddress char (50),
streetAddress char(50),
city char (50),
country char (50),
primary key (client_ID))
select *from client
/* facilities */
create table facilities
facilities_ID varchar (50),
facilities_description char (70),
RoomNumber int,
primary key ( facilities_ID))
select *from facilities
/* Band Rating */
create table Band_Rating
ID varchar (50),
cottage_ID varchar (50),
Rating int,
primary key ( ID))
select * from Band_Rating
/* price*/
create table price
invoice_ID varchar(50),
price money,
startDate date,
Enddate date,
primary key (invoice_ID ))
select * from price
/* Regions*/
create table Regions
Id varchar (50),
cottage_ID varchar (50),
Regions_Name char (50),
Regions_Specification char (70),
primary key (Id))
select * from Regions
/* booking*/
create table booking
booking_ID varchar (50),
Discount char (20) ,
date_booked date ,
time_booked time ,
startdate date ,
End_date date,
primary key (booking_ID))
select * from booking
create table cottage_facilities
facilities_ID varchar (50),
cottage_ID varchar (50))
select * from cottage_facilities
/*cottage Table foreign key */
alter table cottage add constraint FK_thiru
foreign key (invoice_ID ) references pice(invoice_ID)
/*cottage Table foreign key */
alter table cottage add constraint FK_thiru1
foreign key (booking_ID) references booking (booking_ID)
/*client Table foreign key */
alter table client add constraint FK_thiru2
foreign key (booking_ID) references booking (booking_ID)
/*cottage_facilities Table foreign key */
alter table cottage_facilities add constraint FK_thiru3
foreign key (facilities_ID) references facilities (facilities_ID)
/*cottage_facilities Table foreign key */
alter table cottage_facilities add constraint FK_thiru4
foreign key ( cottage_ID) references cottage (cottage_ID)
/*Band_Rating Table foreign key */
alter table Band_Rating add constraint FK_thiru5
foreign key ( cottage_ID) references cottage (cottage_ID)
/*Regions Table foreign key */
alter table Regions add constraint FK_thiru6
foreign key ( cottage_ID) references cottage (cottage_ID)
/* insert cottage table */
insert into cottage values ('100','10','01','AidaHotel','0771234569','[email protected]','Kalutara 5/3','vilem_street','Kalutara ','srilanka')
insert into cottage values ('101','11','02','Airport Garden Hotel','0772636478','Airport Garden [email protected]','Seeduwa 5/3','royal_street','Seeduwa ','srilanka')
insert into cottage values ('102','12','03','Alpine Hotel','0773246258','Alpine [email protected]','112/3, Glenfall Road, ','via Queen Elizabeth Drive','Nuwara Eliya ','srilanka')
insert into cottage values ('103','13','04','Ambalama Leisure Lounge',' (036)2254377','Ambalama Leisure [email protected]','Ihala Hanwella, ','Avissawella','Avissawella ','srilanka')
insert into cottage values ('104','14','05','Austrian Beach Resort',' (041)2257360','Austrian Beach [email protected]','Kemagoda ','Dickwella','udugampola ','srilanka')
select *from cottage
/* insert price table */
insert into price values ('10',10000,'2014/01/01','2014/01/03')
insert into price values ('11',15000,'2014/01/10','2014/01/20')
insert into price values ('12',11000,'2014/01/25','2014/01/30')
insert into price values ('13',12000,'2014/02/10','2014/02/15')
insert into price values ('14',13000,'2014/02/20','2014/02/25')
select * from price
/* insert booking table */
insert into booking values ('01','10%','2013/12/30','10:30:30','2014/01/01','2014/01/03')
insert into booking values ('02')
insert into booking values ('03')
insert into booking values ('04')
insert into booking values ('05')
please help me anybody i hope all

Its obvious you've a typo in below statement hence its refering to a nonexistent table
alter table cottage add constraint FK_thiru
foreign key (invoice_ID ) references price(invoice_ID)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Systemd system-modules-load error [Solved]

After recent update of kernel too linux-3.14.4-1I now cannot boot system due too this error
-- Logs begin at Fri 2014-05-16 11:58:04 BST, end at Fri 2014-05-16 12:00:56 BST. --
May 16 11:59:33 arch systemd[1]: Starting Graphical Interface.
-- Subject: Unit graphical.target has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit graphical.target has begun starting up.
May 16 11:59:33 arch systemd[1]: Reached target Graphical Interface.
-- Subject: Unit graphical.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit graphical.target has finished starting up.
-- The start-up result is done.
May 16 11:59:33 arch systemd[1]: Starting Network.
-- Subject: Unit network.target has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit network.target has begun starting up.
May 16 11:59:33 arch systemd[1]: Reached target Network.
-- Subject: Unit network.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit network.target has finished starting up.
-- The start-up result is done.
May 16 11:59:33 arch systemd[1]: Startup finished in 4.181s (kernel) + 1min 31.543s (userspace) = 1min 35.724s.
-- Subject: System start-up is now complete
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- All system services necessary queued for starting at boot have been
-- successfully started. Note that this does not mean that the machine is
-- now idle as services might still be busy with completing start-up.
-- Kernel start-up required 4181476 microseconds.
-- Initial RAM disk start-up required INITRD_USEC microseconds.
-- Userspace start-up required 91543070 microseconds.
May 16 12:00:56 arch systemd[1]: Starting Load Kernel Modules...
-- Subject: Unit systemd-modules-load.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-modules-load.service has begun starting up.
May 16 12:00:56 arch systemd-modules-load[316]: Failed to lookup alias 'sg': Function not implemented
May 16 12:00:56 arch systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
May 16 12:00:56 arch systemd[1]: Failed to start Load Kernel Modules.
-- Subject: Unit systemd-modules-load.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-modules-load.service has failed.
-- The result is failed.
May 16 12:00:56 arch systemd[1]: Unit systemd-modules-load.service entered failed state.
Might be just that naming of sg has changed have updated and tried to run mkinicpio but it still does not find module?
Solved put it down to a bad dd clone of drive partition, have rerun and all seems to working now.
Last edited by Mr Green (2014-05-17 12:20:52)

Yep. It was my own fault. I had been using the b43 driver for my BCM4331 wifi card, and recently switched to broadcom-wl. However, I still was trying to load b43 in /etc/modules-load even though I had removed the driver and module from my system. Not sure why my system only started complaining in 3.18.5, but in any case removing the offending .conf file solved the problem. Thanks, graysky.

F-Spot Error (Solved)

Similar Messages

Maybe you are looking for