F1 Doucmentation not found/not coming

Please help me out for the following.
when i press F1 documentation is not coming.
Thanks in advance
sameer

Hi
I have user who is not able to get F1 help as suggested two steps in above communication.
1) Check Box for In Performance Assistance is activated given in the path.
Here goto --> Help --> Settings --> In F1 Help
2) Its not working, SAP GUI re installed.
But still F1 help is not coming.
Regards
Ravi Grover

Similar Messages

HT1349 Not a Mac computer-have had ITunes on this computer for literally years. This morning i am getting an error message trying to open Itunes - MSVCR80.dll not found, Not installed correctly Error 7 (Windows error 126). DL would not work. Help!

Have had Itunes on this computer literally for years. This AM message "MSVCR80.dll not found, not installed correctly Error 7 (Windows error 126) "- and could not download (it wanted a mobile device - I don't have one)
Help!

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Import user drive (Mac HD) not found / not available as import source

Hi,
the Mac internal HD ist not shown on import screen (no user drive shown!). Whenn I select 'choose other source' I can see the user drive but no
finder-structure an all!!! pictures appear for import (sorry if I don't use the
right words no nativ!)
pls tell me how to add screenshots to explain - thx

Hi,
thank you for this incredibly helpful advice.
The vanished folders are back in place. :-D
Great!
Am 16.05.2014 um 23:31 schrieb blokfluitist <[email protected]>:
import user drive (Mac HD) not found / not available as import source
created by blokfluitist in Photoshop Lightroom - View the full discussion
I just had the exact same problem ! And am delighted to say that it's fixed thanks to a friend who pointed me here... http://m.imore.com/how-unhide-your-users-directory-1093
I followed the instructions and my user drive has now been restored to the image source list... phew !!
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6385792-640708/ScreenShot2014-05-16at19.21.51.png
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6385792-640715/277-605/ScreenShot2014-05-16at22.03.52.png
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6385792#6385792
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Optimum domain not found page coming up?

Hi, for some reason, recently, when I type a URL without the end (.com/net/org/etc.), instead of automatically going to a page, I get an Optimum domain not found page. The weird thing is, my mom uses the same internet provider and network but doesn't get the message on her computer. Here's what I get.
http://i138.photobucket.com/albums/q248/jetsfan_28/Picture1-30.png
Anyone know why this is happening? It happens on Firefox too.

I'd say your ISP is redirecting you to their search page when their DNS servers can't find an entry for what you typed in. Have you tried typing the name and then pressing Shift+Enter? This will force the browser to add .com at the end of the entry.
But if you really want to avoid this, you should change the DNS Server entries in System Preferences by adding these two:
208.67.222.222
208.67.220.220
click Apply Now and then quit System Preferences. Restart Safari and try it again. Your browsing
speed should increase and these redirects to the Optimum search page should stop. Instead, if an entry can't be found or is uncertain, you'll be taken to the OpenDNS page where it will try to suggest what you may have been looking for, or allow you to search for it.
Mulder

AIP-50547 - TPA Not Found - Not Picking up Sender ID (re: "test")

I am getting closer and closer here.
I have created an 850 with ACME as the sender, and the host being GlobalChips, but now the system thinks that a sender called "test" is in the edi packet.
Does anyone have any ideas here ? I also made sure that my TPagreement has the correct effective date of today and a duration until the end of the month.
Thanks.
Arthur (203-921-5925)
Error Message: -->
Trading partner agreement not found for the given input values: From party[NAME] "test", To party[NAME] "GlobalChips", Business action name "Process_Orders"; also verify agreement effectiveToDate
EDI Data:
ISA*00* *00* *01*ACME ZZGlobalChips *050627*1003*U*00400*000024608*0*P*>
GS*PO*ACME*GlobalChips*20050627*1003*000024608*X*004010
ST*850*0001
BEG*00*NE*PO400055*00*20050715
DTM*074*20050706
TD5***FEDX**R02
N1*BT*Zanes
N3*P.O.Box 2198
N4*MEMPHIS*TN*381019842
N1*VN**93*02741
N1*ST*AUTOZONE #2313*ZZ*T9055
N3*490 RITCHIE HWY
N4*SEVERNA PARK*MD*21146
REF*ST*2313
PO1*1*450*EA***VP*E7153*SK*10009
PID*F****10009
PO4*1
TD5***FEDX**R02
CTT*1*1*3*01
SE*18*0001
GE*1*000024608
IEA*1*000024608

Hello Arthur,
Yes, the file naming convention is causing this problem. Please arrange the file name appropriately by referring to the following document.
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_010_Transport_File_FTP_Internal.pdf
Note : Do not use the trading partner name as test , when it is not configured.
Please also refer to the following link
EDI over FTP
There seems to be a bug in EDI over generic protocol, in which the identification is always assumed to be based on the exchange. Hence it is a must to give the appropriate file naming convention. HTH.
Rgds,Ramesh

I can not burn CD's with my Itunes anymore. It tells me I am missing CD burner and to re download ITunes. I have done that and it stills does not work. Every time I try, Disc Recorder not found keeps coming up! Please someone help me!!!

I can not burn a CD with my itunes anymore. It tells me to re download itunes. I have done that and still have the same problem. When I do try, Missing disc recorder keeps coming up. Please help!!!!

Hello again, Stew.
Also when I open itunes it gives me a warning and says "The registry settings used by the itunes drivers for importingand burning cd's and dvds are missing. Please reinstall itunes."
With that one let's first try a reboot and repair.
Reboot the PC (very important), and the do a *repair install* of iTunes.
Go to your "Add or Remove Programs" control panel, select iTunes, click "Change" and then click "Repair".
Does iTunes launch without the error message now?
If no luck there, try checking for a device filter conflict in your registry:
iTunes for Windows XP: Troubleshooting CD issues caused by device filters

TREX for NetWeaver 7.0 Java (2004s) SP9 not found - Not in FTP site.

The Sneak Preview for Java 7.0 shows a TREX file for download. However the file is not there. Is this a known issue? We are looking forward to using the trial, but without searching and classification, we cannot research the best way to implement our DMS.
Thanks in advance for any information on trial TREX availability.
Message was edited by:
Craig Burnett

I just checked this morning and the link now points to the SAPNetWeaver04_SP16Preview_TREX6116P2 rar file. I had downloaded that file back on 6/7/07 but it would not work. It would quit at the question asking for an instance to apply the hot fix, so I am guessing that it is only a maintenance release.
I have not re-downloaded it since they fixed the link.
However, I eventually found a download of TREX 6.1 on the SAP Software Distribution Center site found here:
<a href="https://websmp205.sap-ag.de/swdc">SAP Software Distribution Center site</a>
Search for 51030611. I was able to load that successfully.
Good luck.
Message was edited by:
Craig Burnett

Optical Drives Not Found/Not Working

Hello everyone,
I'm having trouble getting my optical drives working. They are both the same make and model, and they both have power (open and close) but they aren't recognized by the system. I installed Arch a couple of weeks ago, after the init scripts/systemd change, so nothing was broken there (I'm not sure if that would even have anything to do with it.
I've done some research to see if I could find any drivers/firmware, but all of things I've found are only for Windows. The optical drives do work in Windows. I have added myself to the 'optical' group, and dmesg | grep CD gives:
[ 0.630535] ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS04, max UDMA/33
[ 0.630560] ata5.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33
I also recall reading here that perhaps they aren't being picked up by the kernel, but I am very unclear on how to check to see what the kernel is picking up. I'm also not sure if they have ever worked under Arch and then stopped, or whether they never worked at all. I just found out earlier today when I went to burn a CD and xfburn gave a message saying that there were no burners found.
The /dev directory has no cdrom* or sr* listings at all. lshw also shows nothing about the optical drives. Any help would be greatly appreciated.
Thanks.

I unplugged one of the drives, but it still did not show up in /dev. I checked the systemd log and it shows the folllowing:
[dochollidae@ArchLinux ~]$ sudo journalctl | grep DVD
Dec 02 03:40:58 ArchLinux kernel: ata5.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33
Dec 02 08:10:08 ArchLinux kernel: ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS04, max UDMA/33
Dec 02 08:10:08 ArchLinux kernel: ata5.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33
Dec 03 04:32:35 ArchLinux kernel: ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS04, max UDMA/33
Dec 03 04:32:35 ArchLinux kernel: ata5.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33
Dec 03 13:25:44 ArchLinux kernel: ata3.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33
Dec 03 13:59:04 ArchLinux kernel: ata1.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33
Dec 03 14:11:33 ArchLinux kernel: ata5.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33
Dec 04 02:31:28 ArchLinux kernel: ata5.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33
Dec 04 11:52:41 ArchLinux kernel: ata5.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33
The one labeled "TS04" isn't there anymore, but the one that is doesn't show up in devices.
I looked into writing udev rules, and I came across this thread and created a file /etc/udev/rules.d/82-cdrom.rules:
SUBSYSTEM=="block", KERNEL=="sr0", SYMLINK+="cdrom cdrw dvd dvdrw", ENV{GENERATED}=1
# permissions for IDE CD devices
SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", GROUP="optical"
# permissions for SCSI CD devices
SUBSYSTEMS=="scsi", KERNEL=="s[rg][0-9]*", ATTRS{type}=="5", GROUP="optical"
That didn't do the trick, but being that I have never dealt with writing udev rules before, I'm not sure if I'm going about it the right way.

XI / PI SOAP Adapter - MessageServlet not found / not responding

I am in trouble with XI SOAP Adapter. When I try to reach the MessageServlet ( http://host:port/XISOAPAdapter/MessageServlet ) I get the response that document dont exists. Why MessageServlet do not respond? Anyone can help me?
In my Adapter Monitor ( http://host:port/mdt/amtServlet ) I see about the SOAP adapter a grey status and the information: "SOAP Adapter Monitoring is now part of Channel Monitoring". This is not a problem, according to Suraj: "SOAP Adapter will become active only when you sent a message through that for atleast one time.")
See also these topics:
SOAP adapter installation and activation
Adapter monitoring: SOAP is grey although it is used?
how can i enable SOAP Adapter?
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012003146900000286382005 (SAP Note 856597)
 I have readed these topics (and others), but my problem seems to be a little different.

My XI runtime cache contents (SXI_CACHE) are up-to-date.
Information of some of my XI components:
Software Components
Vendor Name Version Location Applied
sap.com SAP-JEE 6.40 SP17 (1000.6.40.17.0.20060516064307) SAP AG 20060612185606
sap.com SAP-JEECOR 6.40 SP17 (1000.6.40.17.0.20060516064111) SAP AG 20060612185559
sap.com NWMADMIN 6.40 SP17 (1000.6.40.17.0.20060515153837) MAIN_APPL63VA_C 20060612185601
sap.com SAP_XITOOL 3.0 SP17 (1000.3.0.17.0.20060504222004) SAP AG 20060613105756
sap.com SAP_XIPCK 3.0 SP16 (1000.3.0.16.0.20060220233019) SAP AG 20060612185556
sap.com LM-TOOLS 6.40 SP17 (1000.6.40.17.0.20060417111655) MAIN_APPL63VA_C 20060612185603
sap.com SAP-XICONS 3.0 SP16 (1000.3.0.16.0.20060220232901) SAP AG 20060612185600
sap.com SAP-XIAFC 3.0 SP12 (1000.3.0.12.5.20050712085155) SAP AG 20060612185555
sap.com SAP_XIAF 3.0 SP17 (1000.3.0.17.0.20060522230043) SAP AG 20060613103623
sap.com SAP_JTECHF 6.40 SP17 (1000.6.40.17.0.20060516064445) SAP AG 20060612185559
sap.com SAP_JTECHS 6.40 SP17 (1000.6.40.17.0.20060516064629) SAP AG 20060612185606
sap.com com.sap.aii.af.mp 3.0 (3.0.1720060522104934.0000) SAP AG 20060613102037 sap.com/SAP-XIAFC 
sap.com com.sap.aii.af.soapadapter 3.0 (3.0.1720060522104934.0000) SAP AG 20060613103506 sap.com/SAP_XIAF
Thanks a lot! If you need other information, please, let me know.
Ivan, from Brazil

"https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012003146900000286382005 (SAP Note 856597)
I have readed these topics (and others), but my problem seems to be a little different."

HTTP : 404 Not found - Not able to download file using custom table

Hi ,
I have created the custom procedure to download the file as follows :-
create or replace PROCEDURE "DOWNLOAD_MY_FILE" (p_file in number) as
     v_mime varchar2(255);
     v_length number;
     v_file_name varchar2(2000);
     Lob_loc BLOB;
BEGIN
     select mime_type, blob_content, file_name,dbms_lob.getlength(blob_content)
          into v_mime,lob_loc,v_file_name,v_length
          from consultant_feedback_header
          where file_id = p_file;
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
htp.p('Content-length: ' || v_length);
-- htp.p('Content-Disposition: attachment; filename="' || v_file_name || '"');
          owa_util.http_header_close;
          wpg_docload.download_file( Lob_loc );
end download_my_file;
I have followed the following steps :-
1) Log in into SQL COMMAND as SYS
2) alter session current_schema=FLOWS_XXXXXX;
3) compile the procedure with my pl/sql procedure :
CREATE OR REPLACE FUNCTION
wwv_flow_epg_include_mod_local(
PROCEDURE_NAME IN VARCHAR2)
RETURN BOOLEAN
IS
BEGIN
IF UPPER(procedure_name) IN (
' DOWNLOAD_MY_FILE') THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
END wwv_flow_epg_include_mod_local;
I don´t know what am I do wrong?
Regards
Naveen

Check whether you are using a path on the Application Server.
OPEN DATASET cannot process files on presentation server. I guess, the path you are using is present on your PC or some other server that is not the SAP application server.

CSI Not found(not recognized) when running up2date --register

I recently downloaded OEL 5.5, paid for the Network support option (which DOESN'T allow Support logging) but when I try to log in to download updates, I enter my username, password, the CSI provided me when I purchased the Network option but it errors telling me the CSI is invalid. Any suggestions?

Been there, done that already. I have an account, I even received an email from Oracle with the Network UL CSI. The problem is that running up2date --register works but I keep getting a message that the CSI is INVALID.

Number range object HRTR_PDOC : Interval not found

Hi,
I am doing Travel Mgt testing i got two problems
1. Travel Policy is not taking when entering the expences
2. when posting the doc to FI the error "Number range object HRTR_PDOC : Interval not found" is coming
Pls suggest
thanks in advance
chandu

Hi,
Check table NRIV
Regards,
Manoj.

Itunes: Quicktime Not Found

Hi, my itunes started doing the quicktime not found thing about a week ago.
I've uninstalled itunes and quicktime multiple times, and have installed quicktime alternative and lite multiple times (with the plugin for itunes). they have worked temporarily, but the quicktime not found keeps coming back. Help?

Hello the following article below will assist with a more thorough cleaning of Apple Software.
The following Apple programs should be uninstalled in the order listed to reduce the amount of reboots needed. Keep in mind not all programs in the list below will be listed in your Add/Remove or Programs and Features list. So if you can not find the exact name or something similar then continue down the list.
If you have never uninstalled Apple software below by removing all the programs listed but always just removed iTunes and Quicktime. Try just the basic uninstall of what is listed. If it still does not work. Repeat the step and then check out link below.
1. Uninstall the following Apple Software in the following order to help reduce reboots
-Apple Mobile Device Support
-Apple Software Update
-Bonjour
-Windows iPod Updater (Name might be different but look for anything with the word iPod)
-MobileME Control Panel
-Quicktime
-iTunes
*Now reboot the computer
-If step above did not resolve. Repeat step above then follow article below
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926?viewlocale=en_US

Integrating Google Maps in Oracle Apex and 404 Not found error page

Currently using APEX version 3.2.0.00.27 installed in OracleXE version 10.2.0.1.0. Have been attempting to recreate some examples of Google Maps within APEX. Found a nice set of examples here that build up to what I'm looking to ultimately do by incorporating google maps into APEX:
http://blog.whitehorses.nl/2009/10/04/integrating-google-maps-in-oracle-apex/
Unfortunatly, I'm getting the "404 Not Found, Not found, The requested URL /apex/wwv_flow.accept was not found on this server" page when I try to recreate the "Map with Search" example. I'd like to see if this really works using the html input and button tags in the body/region source versus creating APEX items to pass the address values to the javascript in the html header of the apex page. I'm thinking it's just an html thing within APEX that you have to do it a certain way, but I haven't managed to hit that magic combination. have gone to the google maps api v2 and looked at the html they use (it's what these examples with apex are based on) and tried that just to see. Same 404 result.
I've seen suggestions at this forum and elsewhere that the 404 error is due to a bug. have been to metalink, and really haven't seen anything that spells out what the bug is and how to patch it or work around it. May be I just haven't found the right note/doc yet. have seen suggestions to change something associated with the Anonymous account that APEX uses. Have turned on authentication in the application to use an APEX user account with a logon page to the application. Still get the 404. Although, I have not adjusted anything elsewhere, like a DADS config file, because the apex/xe configuration is using the plsql gateway. Not sure of any procedure for changing settings on anonymous account when using plsql gateway.
Open to suggestions. APEX 3.2 is customer version, so going to 4 may not be an option yet. XE, on the other hand, can certainly be swapped for an 11g version standard or enterprise edition if need be. I don't think this is a db version problem though. I think it's more on the APEX side of things.
Anyway, any help or suggestions are appreciated.
thanks
rtp
Edited by: RTP on Jun 24, 2011 10:30 AM

Hi I have the same problem.... if you found the solution, please put it here to see it... I need a solution to this its urgent!!
Thanks!!

[Solvd]hd0,gpt1error: file /EFI/Microsoft/Boot/bootmgfw.efi' not found

I'm trying to configure GRUB2 to load Windows 8 on UEFI system.
os-prober does not detect it.
grub-mkconfig creates only for Linux (tried both with mounted and unmounted Windows partition).
So I went for manual entry.
I executed the following
$ mount /dev/sde1 /boot/efi/
$ grub-probe --target=fs_uuid /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
69DB-D2EB
# grub-probe --target=hints_string /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
--hint-bios=hd4,gpt1 --hint-efi=hd4,gpt1 --hint-baremetal=ahci4,gpt1
Created menuentry for /boot/grub/grub.cfg
menuentry "Microsoft Windows 8" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --fs-uuid --hint-bios=hd4,gpt1 --hint-efi=hd4,gpt1 --hint-baremetal=ahci4,gpt1 69DB-D2EB
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
And when I choose it it says
hd0,gpt1error: file /EFI/Microsoft/Boot/bootmgfw.efi' not found
Note that EFI partition is not mounted is fstab (does it make a difference for GRUB?).
Also, specifying
chainloader /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Gives the same not found.
P.S. Windows "fast start" is disabled
Last edited by Doctor Drive (2013-09-29 09:57:25)

Doctor Drive wrote:
Thank you, the.ridikulus.rat.
I just booted back from windows to tell the same.
I just found the solution here
http://unix.stackexchange.com/questions … th-windows
I was configuring according to the ArchWiki.
The ArchWiki was missing that point.
https://wiki.archlinux.org/index.php/GR … I-GPT_Mode
it said
menuentry "Microsoft Windows Vista/7/8 x86_64 UEFI-GPT" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --fs-uuid $hints_string $uuid
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
Just edited the wiki. Thanks!
I initially wrote that section of the wiki (with "--set=root" included), but someone had changed it recently ( https://wiki.archlinux.org/index.php?ti … did=276742 ).
Last edited by the.ridikulus.rat (2013-09-29 10:02:48)

F1 Doucmentation not found/not coming

Similar Messages

Maybe you are looking for