F1 help for customized infotype label
Dear expert,
I have a customized infotype and I would like to add the hep text for each label.
But when I press F1 inside the customized infotype, it always said "No documentation available", but this works fine for the standard infotype.
Could you please let me know how to create the help for it?
Best Regards,
WF
Hi William,
While on the field in PA30, press F1 - Technical information and note down the data element of field -the field should be assigned to a data element-.
Then go to SE11 for that specific data element. Press "documentation" button and create the documentation within text document.
Do not forget to activate the documentation.
Regards,
Dilek
Similar Messages
-
How to add search help to custom infotype listbox??
Hi All,
How to add search help to custom infotype listbox??
Thanks in advanceHi Vinay,
We have search help and list box as 2 different options.
At a time we can make a field a list box or a search help.List box is restricted and we can pick values from the defined list whereas in search help we can allow more entries and then validate the value entered later.
Implementing a listbox or search help in infotype is same as that of implementing it in a modulepool .
for search help..we can create a custom search help or check for existing search help in se11
then in the screen on infotype field..assign the search help direcly at the screen painter level..
double click on the field in screen painter -> change mode and then in the space for "search help" enter the search helps name
for list box..in the screen painter ,make sure the field is selected as list box..then in PAI of screen we do a
(Process on value-request..field fieldname module module name)..check syntax and other details...
Using function module vrm_set_value fill the field and populate it as required
Pls check and revert
Regards
Byju -
E-Recruiting : Creation of Search Profile for custom infotypes
Dear experts,
Can anyone let me know if you have created search profiles for custom infotypes in eRecruiting?
The requirement is for the TREX to be able to search for Candidates based on the fields which are defined in this custom infotype. This infotype (9999) is completely custom defined mapped to object NA.
In the IMG,
I don't have to change the search profile type
I created a new Z Information category.
Here, i have to specify an extraction class for this Z Information Category.
Can anyone please tell me what this should be? Can i give it as "CL_HRRCF_CEC_INFOTYPE" ?
Also, can anyone please mention the significance of the table "T77RCF_SPT_INFTY " and how we should be handling the entries here for our custom infotype ? Should we create a custom class to specify here? How should we do this ?
Any inputs & thoughts regarding this will be invaluable.
Needless to say, i created the Z information category with the class CL_HRRCF_CEC_INFOTYPE but when i run the report RCF_RECREATE_SEARCH_PROFILE,It is giving me a lot errors.
Please help.
Regards,
SowmyaSowmya,
To answer your question, Yes, automatic generation of NA for newly hired/created PERNR (P) is because of the integration you have activated between PA and eRecruit via BADI implementations. Look at OSS note 997181 for details on how integration works.
If you dont need integration between PA and eRecruit on PA40 then you may have to tweak the BADI's.
regards
Sridhar Kandisetty -
Reg : F4 help for custom fields in ALV report
hi friends..
in my internal table i have fields including 1 custom field..
DATA : BEGIN OF i_final OCCURS 0,
pernr LIKE p0000-pernr,
begda LIKE p0000-begda,
plans LIKE ZPOSITION-plans, (custom)
werks LIKE pspar-werks,
end of i_final.
i want to display this i_final table in alv. for that i genetrate one fieldcatalog
PERFORM fcat USING:
'I_FINAL' 'PERNR' 'P0000' 'PERNR' '15' 'X' '',
'I_FINAL' 'BEGDA' 'P0000' 'BEGDA' '10' 'X' '',
'I_FINAL' 'PLANS' 'ZPOSITION' 'PLANS' '8' 'X' '',
'I_FINAL' 'WERKS' 'PSPAR' 'WERKS' '14' 'X' ''.
in custom table zposition, i maintain serch help for custom field "PLANS".
then i used reuse_alv_grid_display.. for all the std fields along wit custom fields
i got f4 all std fields but for my custom i am not getting the f4 help
how can i get the F$ help for this custom fields Zposition-plans..
plz give some ideaHi
In that Ztable against the field
PLANS give the check table name as <b>T528B</b>
then it will automatically give the search help
or you can create your own search help(elementary) and add to that field
Reward if useful
regards
Anji -
How to assign search help for custom cost centre field in SRM 7.0
Hi Experts!!
We are currently working in SRM 7.0.As per our business requirement, in account assignment tab we need to use a custom
cost centre field (ZCOST_CENTRE) instead of standard cost centre field.It is observed that for standard cost centre field there is a standard web-dynpro search-help assigned where it will return the F4 search help values from backend.
Can any one of you please help me how can I assign the search-help for the custom cost centre field. Is there any FM to call the backend cost centre search help for custom field or any other way how can I achieve this?
Thanks in advance.
Regards,
Kalyanikalyani,
i can see your requirement in below way..
as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH INTERFACECONTROLLER
so you can replicate the same functionality for your z field.
but can you clarify one thing.. why are you going for this z field in place of standard field ? -
Search Help for Custom field in Sourcing Cockpit
Hi SRM Experts,
I added custom field "rush order" in the Structures as per requirement. I added code in MODIFY_SCREEN function module. Search help is working for "rush order" in Process Purchase Orders (to search PO) and Check Status (Searching Shopping Cart). But it is not working in sourcing cockpit. Please guide or suggest me is there any additional settings or programming is required to have search help for custom fields in Sourcing Cockpit.
Thanks a lot in advance.
Thanks,
KoyyaHi SRM Experts,
Please let me know any suggestion on this issue.
Thanks a lot in advance.
Thanks,
Koyya -
Logical database PNP not retrieving data for custom infotypes.
Hi all,
I am using logical database PNP in a program. I have declared infotypes as follows:
INFOTYPES: 0001, 0002, 0041, 9801, 9840.
The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
regards,
Hamzasolved
-
Need F4 Help for custom container element based on partner type
Hi Friends
I am displaying customer details in custom container .In that custom container I have a field Partner number,Partner type etc etc..
I included F4 help for partner number field, In that I referenced the following field.Now its coming perfectly.
wa_cat1-f4availabl = 'X'.
wa_cat1-ref_table = 'KNA1'.
wa_cat1-ref_field = 'KUNNR'.
But as per my requirement, customer wants to get the different F4 help when the partner type eq "Contact Person".
Rest of the partner type(Ship to party, Sold to party,Reseller, End user) should show the above one.
So I dont know, where I have to change, because in the field catelod level there is no option to control particular type in the column.
Kindly help me on this.
Thanks
GowrishankarHi Jose
Thanks for your Input.I created Event Receiver than Defined and implemented a method to get F4 help for customer number and email id field.Already F4 help is available for Email ID.Now I want to Include the F4 help for partner number field, it will call the search help based on partner type.I can able to get the partner number field search help, but F4 help is not working for email id.
I am not sure some whee its over writing some values or I am not sure.If I comment partner number F4 help class, I can able to get the F4 help for email address.
Plz guide to me to fix the same.
Thanks
Gowrishankar -
F4 help for Customizing Transport Request Field....
Hi,
I need a Function Module for F4 help for Customizing Transport Request field. I have used the below FM but I ma able to get only Customizing TR for only Login User Name only but not other Users. How to get the Customizing TR which are created by other Users(Owner is diferent from Login Owner).
PARAMETERS: p_cts TYPE e070-trkorr OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_cts.
PERFORM get_cts CHANGING p_cts.
*& Form get_cts
FORM get_cts CHANGING p_cts.
TYPE-POOLS trwbo.
DATA: lv_cts TYPE trwbo_request_header.
To Get only custimzing requests
CALL FUNCTION 'TR_REQUEST_CHOICE'
EXPORTING
iv_request_types = 'W'
IMPORTING
es_request = lv_cts
EXCEPTIONS
invalid_request = 1
invalid_request_type = 2
user_not_owner = 3
no_objects_appended = 4
enqueue_error = 5
cancelled_by_user = 6
recursive_call = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'POPUP_DISPLAY_MESSAGE'
EXPORTING
titel = 'Transport'
msgid = sy-msgid
msgty = sy-msgty
msgno = sy-msgno
msgv1 = sy-msgv1
msgv2 = sy-msgv2
msgv3 = sy-msgv3
msgv4 = sy-msgv4.
ENDIF.
Pass the selected TR to selection screen
IF sy-subrc = 0.
MOVE lv_cts-trkorr TO p_cts.
ENDIF.
ENDFORM. " get_cts
Regards,
Deepthi.Instead of using FM 'TR_REQUEST_CHOICE', you can have direct database select on table E070 and E071.
In E070, the field TRFUNCTION determine the customizing and workbench request.
K-> Workbench Request
W-> Customizing Request -
T code for custom infotype in PA
Hi
T code for custom infotype in PA.
Regards
SudhaHi Sudha,
PM01 is the tcode.
Similar questions were already answered in the following threads
ABAP HR : Infotype Enhancement
So please search and then post specific queries.
rgds
gayathri -
How to upload data for custom infotype
Hi Friends
Can we use HR_INFOTYPE_OPERATIONS FM for custom infotype too or is there other way or other Standard FM to upload data for custom infotype starting with 9000..etc.
Points will be there for sure.
Thanks
Meeta & RoopaThanks for quick response.
my qns is can we use Standard FM like HR_INFOTYPE_OPERATIONS for custom infotype too ?
in my requirment input will come from portal form and in background Java Wd is going to use these FM but i have this big doubt can we use these standard FM for uploading data in custom infotype as well or else is there any other way.. but for sure we can't use BDC and LSMW in this requirement .
Thanks Meeta & Roopa -
Search Help for Customizing Workbench request
Hi Colleagues,
I have two elements in the WD UI viz: Workbench Transport Request and Customizing transport Request.
I have Dictionary Search Help set to SEEF_MIG_TRKORR for Workbench TR but i cannot find a search help for Customizing TR.
Also there is no search filter on the SEEF_MIG_TRKORR search help. Thus i cannot use this for both the elements.
Could you please help to determine the search help for customizing request.
Thanks and Regards,
PiyushPlease try '/SAPSLL/TRKORR_W' OR 'COMSH_DIFF_KEY_GEN_REQ'
Edited by: Ramalingam Muthian on Mar 5, 2010 10:47 AM -
Can't find the Collective Search help for Customer in VD02/VD03
Hi
I ave (I hope ) an easy question for you -
I need to extent the Collective search help for Customer in VD02/VD03 with an additional elementary search help, but I can't find the name of the Collective Search Help (F1 -> Technical Information only gives Search help '=')
So, where do I find it ?
Regards
Morten NielsenOK I Found it - Called DEBI
Regards
Morten Nielsen -
Excuse me, but I don't understand How I can contact a ADOBE expert to ask about my problem? I don't found a mail, or chat or other else...is it possible? Only help for Customer is on the Forum?!?!?
Someone can help me...thanks in advance.
fWhile it is possible you have a faulty unit I'd agree that the menu system took a step backwards with the itunes store centric take 2.0+ software. I think I'm in the minority here though. Apart from the 2.0+ top level interface being butt ugly and confusing to navigate, it simply isn't as responsive as 1.0/1.1 and I think most of this is to do with displaying a combined sync/stream menu. if you sync stuff try setting 'show only synced items' in the AppleTv device tabs in iTunes and see if it makes the issue go away - easy to revert back.
Huge libraries (number of files not actual size of the files) can also be problematic given AppleTV's modest hardware specs but that's more exception than the rule.
With streaming/syncing combined I also think any network deficiencies show up more than they used to. -
Need help for Customizing Correspondence Management
Hi,
Could anyone provide me some documents or reference links which will be helpful for Customizing Correspondence Management in ES4?
Many Thanks!!Hi Santosh,
Sorry for the late reply.
I have a XDP file having both static and dynamic content. I need to populate the dynamic content with some value which I will be getting from the XML which is stored in the body of the SOAP request. I want the letter to be generated dynamically (like no user selection of XML etc) because I want to avoid manual input in the correspondence management.
Could you please let me know if the above can be achieved. If yes, could you please provide any useful stuff related to above requirement.
Many Thanks!!!
Maybe you are looking for
-
Notice days Calculation Error.....
Dear Experts..... I am facing the problem that when i run the leaving action and give the notice period salary to employee system will generate wrong calculation. If i didnot run the leaving action then amount is rightly calculated. Plz find the belo
-
While similar to previous threads ... I've encountered a different flavor of issue with the _unknown user. It has appeared this week exclusively (all other folders appear correct) at the top level, Macintosh HD drive. This isn't a traditional folder,
-
B560 bluetooth file transfer problem?
hi I like when I upload a file with Bluetooth gives this error? where is the problem?
-
How do I stop error message -411 on Mac (10.7.5) boot-up every time?
How do I stop message "InDesign Features could not be installed as it requires a compatible CC app (error -411)" on Mac (10.7.5) on every boot-up? I do not have InDesign CC but do have Photoshop CC.
-
Why can't I reactivate my serial number for Adobe Design Suite Premium CS3?
Below is a screen shot of what I am trying to explain. I did Step 2 but isn't recognizing my serial numbers. I don't understand that. I have purchased this a while back. Is it because it's old? Or do I have to purchase a serial number even though I h