F1 help for SRM portal Screen fields
HI Friends,
Is there any way find the use of particular fields which displayed in SRM Portal(Like we do in ECC by pressing F1)
Pls suggest some way to understand the purpose of all fields getting displayed in SRM portal..(like usae all fileds available in Shopping cart,PO,GC,Contract,SOC etc)
Thanks,
San
Hi Sankar
No F1 help option like that available ..you may need to go back to the BADI and depending on which structure it is which you can see in DOC_CHANGE Badi you will see the description ..of those fields
which can help you to udnerstand a bit more on what the field is about ..
Since the fields are generally self explanatory and intuitive SAP has probably not provided an option of F1` help like that in MM .
Regards
Vinita
Similar Messages
-
F4 Help for the selection screen field
Hi Gurus,
I have to display F4 help for a selection screen field. i am using following code:
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'CODE'
dynpprog = lw_repid
dynpnr = sy-dynnr
VALUE_ORG = 'S'
TABLES
value_tab = gi_text
field_tab = li_fields_tab
return_tab = pi_return_tab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
001 test
001 test1
but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
Please help me out.
Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.Sachin,
I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
REPORT zktest01 .
DATA :
BEGIN OF value_tab OCCURS 0,
field LIKE e070-trkorr,
text LIKE e07t-as4text,
END OF value_tab.
DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
PARAMETERS : p_field LIKE value_tab-field,
p_text LIKE value_tab-text. "NO-DISPLAY.
INITIALIZATION.
t_fldtab-tabname = 'VALUE_TAB'.
t_fldtab-fieldname = 'FIELD'.
t_fldtab-langu = 'E'.
t_fldtab-position = 1.
t_fldtab-offset = 0.
t_fldtab-fieldtext = 'Key'.
t_fldtab-reptext = 'Key'.
t_fldtab-leng = 20.
t_fldtab-intlen = 20.
t_fldtab-outputlen = 20.
t_fldtab-datatype = 'CHAR'.
t_fldtab-inttype = 'C'.
t_fldtab-headlen = 20.
t_fldtab-keyflag = 'X'.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
t_fldtab-tabname = 'VALUE_TAB'.
t_fldtab-fieldname = 'TEXT'.
t_fldtab-position = 2.
t_fldtab-offset = 20.
t_fldtab-fieldtext = 'Text'.
t_fldtab-reptext = 'Text'.
t_fldtab-leng = 60.
t_fldtab-intlen = 60.
t_fldtab-outputlen = 60.
t_fldtab-headlen = 60.
t_fldtab-keyflag = ' '.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
value_tab-field = '101'.
value_tab-text = 'dddd'.
APPEND value_tab.
value_tab-field = '202'.
value_tab-text = 'aaaa'.
APPEND value_tab.
t_dynmap-fldname = 'FIELD'.
t_dynmap-dyfldname = 'P_FIELD'.
APPEND t_dynmap.
t_dynmap-fldname = 'TEXT'.
t_dynmap-dyfldname = 'P_TEXT'.
APPEND t_dynmap.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'FIELD'
dynpprog = 'ZKTEST01'
dynpnr = '1000'
dynprofield = 'P_FIELD'
value_org = 'S'
TABLES
field_tab = t_fldtab
value_tab = value_tab
return_tab = t_rettab
dynpfld_mapping = t_dynmap
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF.
START-OF-SELECTION.
Jeffrey Satriadi -
Can we create serach help for a selection screen field
Can we create serach help for a selection screen field with out creating searchhelp object.
I mean is it possible to create serchelp in the program itself with some specific values i want to give.
E.g say we can define any internal table and fill it with values and using that into selection screen fields
Regards
MaveAT SELECTION-SCREEN ON VALUE-REQUEST FOR paymeth.
PERFORM PAYMENT_HELP.
FORM PAYMENT_HELP.
DATA: begin of DESCR_TAB occurs 0,
DESCR LIKE BKPF-BKTXT,
END OF DESCR_TAB.
DATA: gd_repid like sy-repid.
gd_repid = sy-repid.
DESCR_TAB-DESCR = 'aaaaa'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'bbbbb'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'ccccc'.
append DESCR_TAB.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'DESCR'
DYNPPROG = gd_repid
DYNPNR = '1000'
DYNPROFIELD = 'paymeth'
VALUE_ORG = 'S'
DISPLAY = ' '
TABLES
value_tab = DESCR_TAB.
endform.
Svetlin -
Input help for a selection screen field
I have a selection screen with field species and checkoff activity .
For a given species('sc','sb' or 'ss') , the input values allowed for the
check off activity must be 'SCCK' for species 'SC' ,'SBCK' for species 'SB' and so on.
I need to provide input help for check off activity based on the value of the species.How do i do that?PARAMETER : p_val(10) TYPE c ,
p_val2(10) TYPE c.
AT SELECTION-SCREEN on p_val.
IF p_val = 'SC'.
p_val2 = 'SCCK'.
ENDIF. -
F4 help for the selection screen field designed in screen painter
Hi all,
I have designed selection screen in the screen painter. in that for one of the fields i have to give f4 help. for that i have writter the code in PAI event. in this event i have used the standard Function module for f4 help. but no f4 help is comming for that field. can any body suggest what i have to do.
Thanks & Regards,
Giri.Hi,
You must use the correct event to meet ur requirement use POV event instead of PAI event.
for more clarification and example program see below the demo program
DEMO_DYNPRO_F4_HELP_DYNPRO
DEMO_DYNPRO_F4_HELP_MODULE
Cheers
fareed -
Custom screen field in the SRM portal screen for Business Partner Bidder
I need to add a custom screen field in the SRM portal screen for Business Partner. I have added this custom field in the include structure: CI_EEW_BUT000 and activated it.
I was expecting to see the enhanced field available in the SRM portal screen when I create the bidder. But is not available.
The new field are available if I edit an Business partner only.Hi,
Please look into the following OSS Notes:
Note 675800 - Business partner enhancement SRM on maintenance screen
Note 672960 - User-defined fields 2
Thanks,
Pradeep -
Calendar help for Date i/p field in SRM 5.0 shopping cart
Hi All,
I am working on SRM 5.0..I have a requirement for the addition of custom field ie. lease termination date field on SRM shopping cart screen and having a calendar help for this date input field.
Has anyone tried to add calendar help for an input date field in the ITS service??What all additions have to be done for this(style,images etc)...Does any one has any idea?Please help.
Thanks & Regards,
K rav.Disha can you please send me these images.
IMAGES/CALENDAR/ICO12_CALENDAR.GIF
IMAGES/CALENDAR/LEFT1.GIF
IMAGES/CALENDAR/LEFT2.GIF
IMAGES/CALENDAR/RIGHT1.GIF
IMAGES/CALENDAR/RIGHT2.GIF
my email id: [email protected]
and should i store these images in mime repository? Also I have the below code to be attached in template for calendar function give by Zakhar..do you know where exactly in the template do you insert this code? and do you insert it in the standard template itself. My field will appear in shopping cart line item level (CUF field) so what will be the template number??
<input type=text
id="`ZAPPSSPR_INCL_ITEM_CSF_AVL-ZZSPR_DKK_DATE.name`"
name="`ZAPPSSPR_INCL_ITEM_CSF_AVL-ZZSPR_DKK_DATE.name`"
value="`ZAPPSSPR_INCL_ITEM_CSF_AVL-ZZSPR_DKK_DATE.value`"
onBlur="BBP_ITS_EXTW_CloseCalendar()" maxlength="10" size="10">
<a id="a_ZAPPSSPR_INCL_ITEM_CSF_AVL-ZZSPR_DKK_DATE" name="a_ZAPPSSPR_INCL_ITEM_CSF_AVL-ZZSPR_DKK_DATE"
href="javascript:BBP_ITS_EXTW_OpenCalendarDomRel(window.document.BBPForm.elements['`<b>zappsspr_incl_item_csf_avl-zzspr_dkk_date.name</b>`'], 'a_ZAPPSSPR_INCL_ITEM_CSF_AVL-ZZSPR_DKK_DATE')">
<img src="/sap/public/bc/its/mimes/bbpglobal/99/images/calendar/ico12_calendar.gif" border="0"></a>
Thanks,
Krupa -
Calendar help for Date i/p field
Hi All,
I am working on SRM 4.0..I have a query regarding the addition of calendar help for an input date field....
Has anyone tried to add calendar help for an input date field in the ITS service??What all additions have to be done for this(style,images etc)...Does any one has any idea?Please help.
Thanks & Regards,
Disha.Vijith Kumar,
I also have a requirement to add custom field in SRM shopping cart screen, with calendar as an input help. Can you please pass me the relevant code, for adding this field into HTML template
My email id is [email protected]
Thanx,
K rav. -
H i,
I a m getting the following error in the SRM portal screen.
The following is the my URL link
*http://orange.dht.com:8000/sap/bc/gui/sap/its/bbpstart?sap-client=001*
The page cannot be displayed. Error displayed as below in browser.
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.
Please try the following:
Click the Refresh button, or try again later.
If you typed the page address in the Address bar, make sure that it is spelled correctly.
To check your connection settings, click the Tools menu, and then click Internet Options. On the Connections tab, click Settings. The settings should match those provided by your local area network (LAN) administrator or Internet service provider (ISP).
See if your Internet connection settings are being detected. You can set Microsoft Windows to examine your network and automatically discover network connection settings (if your network administrator has enabled this setting).
Click the Tools menu, and then click Internet Options.
On the Connections tab, click LAN Settings.
Select Automatically detect settings, and then click OK.
Some sites require 128-bit connection security. Click the Help menu and then click About Internet Explorer to determine what strength security you have installed.
If you are trying to reach a secure site, make sure your Security settings can support it. Click the Tools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0.
Click the Back button to try another link.
Cannot find server or DNS Error
Internet ExplorerHi,
I have published all the templates again .when i clik on shop
the page cannot be displayed error is coming.
I am using SRM 5.0 . We are not using EP
When i click some nodes the SRM server details are displayed but the browser details are not displayed
What could be root cause.
Regards
G.Ganesh Kumar -
Need to create a Web Dynpro Application for SRM Portal
We need to recreate the start page for SRM Portal - (Supplier Self-Services) - without any images (as was delivered out of the box) - basically we need to break it down into 4 iViews: All Purchase Orders; All Sched Agreement Releases; All Invoices and Credit Memos; and Account History. All these iViews contains links.
How would one create a Web Dynpro Application to create the above iViews?
Regards,Hi zhang,
take a look to this:
KM:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/kmc/resource%2band%2bcollection%2bversioning%2busing%2bkm%2bapis
https://help.sap.com/javadocs/NW04S/SPS09/km/index.html
Excel:
/people/subramanian.venkateswaran2/blog/2006/10/02/enhanced-file-upload--uploading-and-processing-excel-sheets
Hope this help you.
Vito -
F4 help for Customizing Transport Request Field....
Hi,
I need a Function Module for F4 help for Customizing Transport Request field. I have used the below FM but I ma able to get only Customizing TR for only Login User Name only but not other Users. How to get the Customizing TR which are created by other Users(Owner is diferent from Login Owner).
PARAMETERS: p_cts TYPE e070-trkorr OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_cts.
PERFORM get_cts CHANGING p_cts.
*& Form get_cts
FORM get_cts CHANGING p_cts.
TYPE-POOLS trwbo.
DATA: lv_cts TYPE trwbo_request_header.
To Get only custimzing requests
CALL FUNCTION 'TR_REQUEST_CHOICE'
EXPORTING
iv_request_types = 'W'
IMPORTING
es_request = lv_cts
EXCEPTIONS
invalid_request = 1
invalid_request_type = 2
user_not_owner = 3
no_objects_appended = 4
enqueue_error = 5
cancelled_by_user = 6
recursive_call = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'POPUP_DISPLAY_MESSAGE'
EXPORTING
titel = 'Transport'
msgid = sy-msgid
msgty = sy-msgty
msgno = sy-msgno
msgv1 = sy-msgv1
msgv2 = sy-msgv2
msgv3 = sy-msgv3
msgv4 = sy-msgv4.
ENDIF.
Pass the selected TR to selection screen
IF sy-subrc = 0.
MOVE lv_cts-trkorr TO p_cts.
ENDIF.
ENDFORM. " get_cts
Regards,
Deepthi.Instead of using FM 'TR_REQUEST_CHOICE', you can have direct database select on table E070 and E071.
In E070, the field TRFUNCTION determine the customizing and workbench request.
K-> Workbench Request
W-> Customizing Request -
To implement search help for date and time fields details
how can i implement search help for date and time fields in screen painter
Hi
Declare the variables as sy-datum and sy-uzeit or any other pre-defined data typ of date and ime types. Serach help will automatically comes.
Aditya -
Restricting vendors in search help in srm portal
Hi,
I need to restrict certain vendors in search help in srm portal while creating shopping cart.
These vendors should not be visible to the users for selection.
I tried in the BBP_F4IF_SHLP_EXIT_VENDOR_EXP of the search help BBP_BUPA_VENDOR, but its not working.
Thanks in advance.
AravindHi,
1) Use tcode BP and enter the vendor number and in the last tab (control). Select central block.
2) Use program BUPA_TEST_DELETE for the vendors. -
Enhancements:Search help addition to standard screen-field
Hi Guys,
I am trying to add search help to the standard screen field inco2 in transaction va02. for this I am trying to add inplicit enhancement point in include MV45AFZZ.
I right click over the yellow line and create enhancement implementation in local object. the moment I choose my enhancemetn implementation and press enter, it gives me dump, Please nebody tell me where am I going worng, or Is my approach correct.....Please suggest.......
thanks in advanceHi Anil,
Can you please tell me how to approach for adding search help to standard screen field INCO2 in transaction VA02. -
How to link a search help to a selection screen field
Hi All,
I am using field PKWRG from PA0017 table in selection screen. I need F4 help there as in Tcode PA30 . But this field does not have value table or check table. However, it has a search help attached 'TRV_PKWRG' .
But, I donot know how to assign a search help to a selection screen field. Please help.
Regards,
NibhaHello,
Fetch all the data which from the table which you want to show in the search help and pass the value to the FM
F4IF_INT_TABLE_VALUE_REQUEST and the selection-screen event must be
at selection-screen on value request parameter or selection option variable.
BCALV_TEST_FULLSCREEN
BCALV_TEST_FULLSCREEN_CALLS
BCALV_TEST_FULLSCREEN_PRINT
BCALV_TEST_FULLSCREEN_STATUS
BCALV_TEST_GRID
BCALV_TEST_GRID_DRAG_DROP
BCALV_TEST_GRID_EDITABLE
BCALV_TEST_GRID_EVENTS
BCALV_TEST_GRID_INDEX
BCALV_TEST_GRID_TOOLBAR
BCALV_TEST_HIERSEQ_LIST
BCALV_TEST_LIST
BCALV_TEST_LIST_PRINT
BCALV_TEST_LIST_STATUS
BCALV_VERIFY_DTYPES_D0100_F01
BCSMENUF01
BDLCOF10
BDLDVI10
BDLTREDF
Maybe you are looking for
-
Can we add custom print button to crystal report launched using jsp
Hi, I need to add a print icon in crystal report. My requirement states that I should not use the print button given in the taskbar of crystal report. Can this be done? Thanks
-
Ipod Touch 3rd Gen Freezes, is really slow.
I just bought a new 32GB iPod touch 3rd gen yesterday, and it keeps freezing up. When it loads the "Slide to unlock" screen, the text doesn't "light up" and when I slide the slider over, it doesn't move. after about 20 seconds it then proceeds to the
-
Help needed in building a function
Hello, I am using Oracle DB 11g. I am writing a function. create or replace function func(tab VARCHAR2) RETURN VARCHAR2 AS cursor c is SELECT column_name FROM all_tab_columns WHERE table_name =tab; begin //some statements for i in c loop flag=1; //so
-
Browser right click context menu
Hello Everyone, I want to get the browser right click context menu in the WD Application when they are running in portal. We don't want the SAP Default context menu, which is confusing for our end-users. Is there a way of disabling this. I would appr
-
I'm confused about the pricing for Adobe Creative Cloud - the initial price states that it is inclusive of VAT but when I go to buy there is a new statement which reads... "Each month during your one year term, we'll bill your credit card £22.23 plus