F10-136 Transmitter cable not included?

I just bought the Qosmio F10-136 according to the Quickstart F10 list (number 5) there should be an Infrared Transmitter cable, there isnt one inside the box
does anyone know if there should be one and does the laptop work using infrared?

Hello
You have posted several postings about this theme. In the first post you want to know the content of the box of Qosmio F20-136 and now something about F10-136.
Which notebook do you have? F20 or F10?
Nevertheless, the F10 was delivered only with the Power cable, Modem Cable (if modem present) and Video cable. I dont found any informations about a Infrared cable and I have never heard about such cable.
As far as I know the Toshiba remote controller was delivered with this unit. This remote controller you can use with the Qosmio player.
Bye

Similar Messages

Will the earphones and usb cable be included in the box if i buy an ipod shuffle online?

i want to buy an ipod shuffle online, and so when i went to the compare section, it said that the earphones, usb cable and the ipod itself would be included in the box. however, when i went to the store and cart section, they suggested that i buy both the earphones and usb cable? are they included in the rm169 price tag? if not, are they necessary for the ipod shuffle? thanks in advance to anyone who is able to help me out here

You can click the Store button top left of this page, then iPod and go to the information on the Shuffle to seew what is included in the box. If Apple says the earphones and cable are not included then they must be purchased separately. You need the cable to sync music, and the earphones to hear since the Shuffle does not have a speaker.

Qosmio F10-136 display drivers/video controller

I am in the middle of resintalling everything on my Qosmio F10-136 laptop. I have used the display drivers from the Toshiba website. However, in the device manager the video controller is showing an error and the drivers are not installed. The graphics card is a nVidia GeForce FX go5700. Scrolling pages up and down in IE is very slow.
Also when I go to display properties settings-advanced-adapter the graphics card is not shown under adapter type.
Anyone know what the problem is? Do I need to download drivers from somewhere esle?
Thanks,
Ben

Hi
The graphic driver released on the Toshiba European driver page is working and can be installed properly.
I think you did something wrong.
Try to reinstall the graphic driver again.
Remove the graphic controller from the device manager list and reboot the notebook.
Then try to reinstall the driver again. I would recommend installing it in device manger.
Choose graphic card, update the driver, then point to the downloaded graphic driver and finish the installation.
Cheers

Box not included with refurb'd MBP?

I recently purchased a MacBook Pro 15" Retina (Mid 2012) from the Apple certified refurbished store. I am loving the computer except for one small detail. When I recieved the packaging from the delivery service, I noticed immediately that the MacBook did not include the original packaging. I was expecting to get the authentic box that most apple products are presented in. This is a big deal for me because I enjoy collecting a few of them and it also greatly affects resale later on. Anyone have any ideas?
This is a quote from the Apple certified refurbished guarantee.
Each Apple Certified Refurbished Product:
is repackaged (including appropriate manuals, cables, new boxes, etc.).
So where is my new box Apple??

Fantastichris wrote:
Each Apple Certified Refurbished Product:
is repackaged (including appropriate manuals, cables, new boxes, etc.).
So where is my new box Apple??
I have purchased three Apple refurbished MBPs and they all came in new boxes, but these boxes are not identical to the ones you get when you purchase a MBP at an Apple store. The first came in a plain brown box and the other two in plain white boxes. The quote you posted is accurate. You are assuming that it would be identical to the boxes for new MBPs which is not the case. This is the the way all refurbished MBPs are shipped.
Ciao.

Qosmio F10-136 - Unable to install any drivers

I have a Qosmio F10-136.
I have recently formatted the hard drive. Since I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available online from the Toshiba website but I have been unable to install any drivers except the wireless LAN. Most driver setups refuse to run at all, some seem to install the files, but the driver is not detected.
Please advise.

> 1. Sound device not working still - When I install the audio effect driver (i.e. toshiba virtual sound), there does not seem to be any effect even though it is installed. Then, when I install the SoundMax Audio System, it gives me an that the driver does not exist.
What do you mean exactly by does not seem to be any effect. Can you hear the sound coming from the speakers? Are there any yellow exclamation marks related to the sound card? If not then the sound card driver has been installed properly and the sound should work!
> 2. I cannot figure how to install the LAN driver.
Where is the problem? Download the LAN driver, unzip the package, access the device manager, choose the unknown device (LAN card), point to the driver files downloaded from the Toshiba driver page and finish the installation.
The LAN card should be recognized properly.
> 3. Same with the TV tuner drivers; there is not setup file.
As mentioned above; you can install the drivers in device manager. Choose TV tuner in device manager (possibly marked as unknown device too.) point to the TV tuner driver files and finish the installation.
> 4. During the windows setup, I had created 3 drives, but I cannot access the drives D & E. When I try to access them, windows asks me to format them, but it gives me an error when I try to do so. Also, the hard drive is not shown in the disk management (not even C drive), so I cannot do anything. Although, the hard drive is shown in the device manager.
If other partitions have been created on the HDD then this should be visible in disk management. I dont believe that you cannot see even the C partition. In my opinion you didnt check this correctly.
Access the disk management (MY Computer, right click, manage). Choose Disk Management. There you should see the HDD and CD/DVD drive.
If the partitions have been created but not formatted then you would see just a free space.
Click right on this space and you could either format this or could delete the partition.
PS: I recommend using a 3rd party tool like Partitions Magic in order to create the partitions on the HDD (Win XP)!!!

What Adapter cable is included in Gf4 MX440 package?

What Adapter cable is included in Gf4 MX440 package?
Is It a S-video to RCA cable, and is it composite. Cos I' m planning to buy the card and I would really like to Clone my desktop. The picture on: http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=155&MODEL=MS-8866
is to fuzzy.
Can anyone post a picture of the cable(s) included in this package.

It is not a VTP, it is a T one, without VIVO thingy.
I have the same card and I am not able to find the cable adapter because it is something like 9 and a flat pins connector, not normal S-Video.

Cables Not!

Well after much deliberation off to the local next byte store for and apple TV. Discussion in store showed me the demo set up I had some concerns that the hdmi slot on tv media centre was being used no big deal grab a HDMI switch box.
Well no where on the box, no mention in store during discussion, does it say "No Cables Include" other than power cable. Oh and instructions read that all TV cables to be connected before unit switched on.
So its sunday night no stores open and nothing other than a power cable, cant disconnect and use any of the others as the run in wall cavity. Guys get a sticker on the outside of the box in fluro, its not the cost its the frustration that no in store mention after some 10mins of discussion or markings on the box, that other than the remote and power cable nothing included! Hope this is a heads up for others before they get home and the stores close You need to buy cables!!!!! Totally PO

Winston Churchill wrote:
... I don't think that the OP was complaining that there were no cables included, but that he wasn't told on the box.
As well as the fact that the store didn't tell him.
It may be a little annoying not to be able to use the device for a day or so - we all know the excitement of getting a new purchase home - but this is not exactly a unique omission of information from Apple - most peripheral vendors fail to specify that USB cables etc are not included.
Indeed I feel that cables shouldn't be included, however I do believe the OP is correct that it should be stated on the box.
Yes, it would be nice, it would be great for Apple to take the lead in such transparency which is why I added the feedback link.
"iPhone - dock no longer included and btw we'll redesign the next phone's shape so the one you buy for this will be incompatible, and don't expect that old FW based charger you bought to work either we have a living to make ya know!...ka'ching, ka'ching, ka'ching..." That might be too honest though

Not distributued and Not included issues.

We have a couple of issues with Not distributed and Not included issues. First, since they are commingled with our variances they do not get passed through to PA so we are off between GL and PA. Second, the not distributed are not part of inventory since they remain in the variance account.
Anyone have experience with these and any solutions for these issues?
SAP says we can turn off the price delimiter but we are uncertain as to the effect overall.
Anyway to isolate these to a different GL account posting?

Solution
 **'Not distributed' price differences can be due to three reasons:
 A) System applied a 'Price limiter' logic (stock coverage check).
 You can analyse this case using the value flow monitor transaction:
 - for release 4.7 , transaction CKMVFM
 - for release 4.6C, program SAPRCKM_VERIFY_PRICE_DET (note 324754 is required).
 - for release < 4.6C: Program ZVERIFY_PRICE_DET included in the note 324754 Or directly checking the field CKMLPP-PBPOPO manually.
 In this case, the value field CKMLPP-PBPOPO > cumulative inventory.
 If you still want these price differences to be distributed , you can switch off price limiter logic. Then all price differences are posted to stock, and the price difference account is cleared. You should decide
 for each material if you want to switch off price limiter logic or not.
 So you can achieve a compromise between realistic prices and clearing
 the balance of the price different account.
 Price limiter logic can be switched off in the following way:
Resetting the price limiter quantity:
 In release 4.7 this is done uising transaction CKMVFM.
 In release <= 46C using the ZREMOVE_PRICE_LIMITER (see note 325406).
Note 855387:
 Application of this note will create an additional selection parameter for step 'Single Level Price Determination' to switch on/off price limiter logic.
 This option is the better way, as it is faster provides more flexibility (see the note for more information).
 B) System applied a fallback strategy during price determination
 (see note 579216) to avoid a negative periodic unit price (PUP).
 Please check the attached note 579216:
 If the regularly calculated PUP (based on 'Cumulative Inventory' line) would become negative, the system uses a different strategy to calculate the PUP:
 The PUP is calculated with these priorities:
 1.'Cumulative Inventory' line (no fallback)
 2.Receipts ('ZU') line (Info message C+ 135 in the log)
 3.Beginning inventory ('AB') line (Info message C+ 135 in the log)
 4.PUP-price of previous period (Info message C+ 136 in the log)
 5.S-price (->(Info message C+ 137 in the log)
 The fallback strategy is active by default for Single-Level price determination.
 For multilevel price determination it must be activated with parameter 'Negative price: automatic error management'.
 As a solution, you might check the postings of these materials if they really need to have such big negative price differences or if there is some kind of error in the posting or the production structure
 If you find such errors, you might reverse the corresponding postings and report them in a correct way.
 Or, you might use transaction MR22 (debit/credit material) in order to post a small positive amount of differences to the concerned materials
 so that the resulting actual price would no longer be negative. Then you could perform the period closing (which you had to reverse before).
 In the next period, you might remove this manual posted value from the materials (again with MR22) in order to correct the overall stock values back to their original amounts.
 C) Due to a source code error with transaction CKMM.
 The above situation may be produced because transaction CKMM was executed during the corresponding period.
 When transaction CKMM is processed the system deletes the price differences for the material in the period and these differences are not longer in the period record tables.
 See note 384553 for further details.
 The fact is that the price differences are still visible in CKM3 (as not distributed). This is due to the missing reset of summarization records (MLCD).
 This error is just a problem of CKM3 display, because the differences shown as 'not distributed' do not exist in the periodic records. The PUP of the material is calculated correctly.
 This error is corrected by note 838989 for the future.

Imported Audio CD, two songs imported but not included on album with rest of songs

I just bought an Audio CD "Red River Blue", Artist Blake Shelton. I imported the CD into my iTunes library.
The CD has 11 songs on it. All 11 songs were imported into my iTunes library. Two of the songs had additional artists listed on the credits.
Track 7 Blake Shelton with Martina McBride and Track 11 Blake Selton with Miranda Lambert.
These two songs were imported into my library but not included in the Album. They were labeled with their correct track number and the album was missing a song for track 7 and track 11. There was no cover artwork associated with those songs.
When I moved the album to a playlist these two songs were not included.
This is clearly an error in the current iTunes!
Back before iTunes had the new visual format and new user interface I did not have this problem.
I have reviewed all the preferences for iTunes but can not find any that would seem to control this behavior. I can not conceive that importing a cd should work this way.
I tried to find a way to correct this situation and found that if you did get info on all 11 songs you could force them to be included on one album.
The resulting album did not show track 7 in the correct order and the two tracks were still missing the cover artwork.
I believe that in one of the iTunes updates that required a library conversion all my albums that had this situation were converted wrong so they broke apart songs from their albums.
Jim

And thinking about it, when I reconnected last Sunday I recall that I got that prompt on my phone something like "Do you trust this computer?". Not seen that one for a while.

Exporting EPUB from InDesign CC not including line breaks

I am done with a book and have it formatted the way I want. I am exporting it to EPUB through InDesign CC and previewing it in iBooks and also through Kindle previewer. Everything is fine except for one thing... where I have created page breaks, the exported file is not including them.
I tried exporting to HTML just to see what it did and there is no line breaks there. I know its proprietary markup ( in kindle ) but I still would like to include them in a few specific places ( to mark seperations of chapters ).
In kindle this is the tag they say to use: <mbp:pagebreak />
In iBooks, I have not yet figured out how to create them, I am going to work on that today once I sort out the kindle version.
Is there any way to force it to include line breaks on export. Or alternatively, I could export to HTML but I am having trouble figuring out how to go back to the EPUB format from there and also it didn't include the fonts, so there was other issues to consider as I have a custom font I was using for the headers that looks really good and matches the font on the book cover as well... so I really want to keep that consistent if possible.
Are there any tricks or things I can try here to improve on my workflow and do a better job of seperating the chapters ?

Ok, I hadn't tested the advanced options out in the export menu. It works and does so on both the iBooks and Kindle previewer.. which is good news since that is really important to me to try and find a workflow I can update both of these formats from when I continue to work on my book.
The only strange part is that on some chapters its adding an extra blank page between the chapter and the next. What is odd is that it only happens on some of them (in the iBook reader only, the kindle previewer isn't doing this)
I am going to look into this more closely but its not a major deal as I would prefer a little seperation in the chapters anyways, its not really a bad thing. It is just hard to figure out why its doing this.

Parked invoices not includes in report

Hi
Object: ABAP program ZCAMU_INV_DOWNLOAD
That program downloads invoices created during a month
Problem: Program downloads only invoices created from transaction MIGO (Invoice Creation) or MR8M (Invoice Cancellation). If an invoice has been created from MIR7 (Park Invoice), it is not included, and it should be.
Request: include data from transaction MIR7 (Park Invoice)
rgds
Arjun

Hi,
probably the SELECT contains a filter on field FKART of VBRK table.
Bye
Andrea
Rewards if it helps

Do not include some lines in Subtotals and totals in ALV

Hello All,
I am printing a report with all sale order details and Quantities( delveered ,conformed etc..) iam doing subtotals based on the material and Plant.
In this if the document date is less than the SY-DATUM, we should not include the quantity into the subtotals and totals, Only the orders wiht doc date GQ to Sy-datum then display them..
As of now I am using ALV grid display and doing the sums by
l_wa_fcat-do_sum = c_x. (field catalog) for the whole colom) but i want to avoid sum row from tehe calculation based on the condition.
Do we have any way to achive this, like if we want to have separate color for a purticular Cell then we add an extra field in outout table and we link this field with layout-coltab_fieldname in the same way or any other way if we have.
I will be thankfull to if you can provide me your valuable suggesstions on this. it is very urgent. I am trying in all the ways from my side.

Hi,
see this code,
Complete code for the ALV grid example
This example shows and ALV grid with flights. After selecting a line a change button can be pushed to display a change screen. After the changes have been saved, the ALV grid screen is displayed again, and the grid is updated with the changes.
The example shows:
How to setup the ALV grid
How to ste focus to the grid
How to set the title of the grid
How to allow a user to save and reuse a grid layout (Variant)
How to customize the ALV grid toolbar
Refresh the grid
Set and get row selection and read line contents
Make and exception field (Traffic light)
Coloring a line
Steps:
Create screen 100 with the ALV grid. Remember to include an exit button
Add a change button to the ALV grid toolbar
Create screen 200 the Change screen
The screens:
The code:
 REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
 TYPE-POOLS: icon.
 TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
 CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L I N T E R N A L T A B L E S
 *DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
 TYPES: BEGIN OF st_sflight.
 INCLUDE STRUCTURE zsflight.
 Field for traffic light
 TYPES: traffic_light TYPE c.
 Field for line color
 types: line_color(4) type c.
 TYPES: END OF st_sflight.
 TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
 DATA: gi_sflight TYPE tt_sflight.
G L O B A L D A T A
 DATA: ok_code LIKE sy-ucomm,
 Work area for internal table
 g_wa_sflight TYPE st_sflight,
 ALV control: Layout structure
 gs_layout TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
 DATA:
 go_grid TYPE REF TO cl_gui_alv_grid,
 go_custom_container TYPE REF TO cl_gui_custom_container,
 o_event_receiver TYPE REF TO lcl_event_receiver.
 DATA:
Work area for screen 200
 g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
 DATA:
Internal table
 gi_index_rows TYPE lvc_t_row,
Information about 1 row
 g_selected_row LIKE lvc_s_row.
C L A S S E S
 CLASS lcl_event_receiver DEFINITION.
 PUBLIC SECTION.
 METHODS:
 handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
 IMPORTING
 e_object e_interactive,
 handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
 IMPORTING e_ucomm.
 ENDCLASS.
 CLASS lcl_event_receiver IMPLEMENTATION
 CLASS lcl_event_receiver IMPLEMENTATION.
 METHOD handle_toolbar.
Event handler method for event toolbar.
 CONSTANTS:
Constants for button type
 c_button_normal TYPE i VALUE 0,
 c_menu_and_default_button TYPE i VALUE 1,
 c_menu TYPE i VALUE 2,
 c_separator TYPE i VALUE 3,
 c_radio_button TYPE i VALUE 4,
 c_checkbox TYPE i VALUE 5,
 c_menu_entry TYPE i VALUE 6.
 DATA:
 ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
 CLEAR ls_toolbar.
 MOVE c_separator TO ls_toolbar-butn_type..
 APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
 CLEAR ls_toolbar.
 MOVE 'CHANGE' TO ls_toolbar-function.
 MOVE icon_change TO ls_toolbar-icon.
 MOVE 'Change flight' TO ls_toolbar-quickinfo.
 MOVE 'Change' TO ls_toolbar-text.
 MOVE ' ' TO ls_toolbar-disabled.
 APPEND ls_toolbar TO e_object->mt_toolbar.
 ENDMETHOD.
 METHOD handle_user_command.
Handle own functions defined in the toolbar
 CASE e_ucomm.
 WHEN 'CHANGE'.
 PERFORM change_flight.
 LEAVE TO SCREEN 0.
 ENDCASE.
 ENDMETHOD.
 ENDCLASS.
S T A R T - O F - S E L E C T I O N.
 START-OF-SELECTION.
 SET SCREEN '100'.
 *& Module USER_COMMAND_0100 INPUT
 MODULE user_command_0100 INPUT.
 CASE ok_code.
 WHEN 'EXIT'.
 LEAVE TO SCREEN 0.
 ENDCASE.
 ENDMODULE. " USER_COMMAND_0100 INPUT
 *& Module STATUS_0100 OUTPUT
 MODULE status_0100 OUTPUT.
 DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
 l_layout TYPE disvariant,
Utillity field
 l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
 DESCRIBE TABLE gi_index_rows LINES l_lines.
 IF l_lines > 0.
 CALL METHOD go_grid->set_selected_rows
 EXPORTING
 it_index_rows = gi_index_rows.
 CALL METHOD cl_gui_cfw=>flush.
 REFRESH gi_index_rows.
 ENDIF.
Read data and create objects
 IF go_custom_container IS INITIAL.
Read data from datbase table
 PERFORM get_data.
Create objects for container and ALV grid
 CREATE OBJECT go_custom_container
 EXPORTING container_name = 'ALV_CONTAINER'.
 CREATE OBJECT go_grid
 EXPORTING
 i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
 CREATE OBJECT o_event_receiver.
 SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
 SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
 l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
 gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
 gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
 gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
 gs_layout-info_fname = 'LINE_COLOR'.
 LOOP AT gi_sflight INTO g_wa_sflight.
 IF g_wa_sflight-paymentsum < 100000.
 Value of traffic light field
 g_wa_sflight-traffic_light = '1'.
 Value of color field:
 C = Color, 6=Color 1=Intesified on, 0: Inverse display off
 g_wa_sflight-line_color = 'C610'.
 ELSEIF g_wa_sflight-paymentsum => 100000 AND
 g_wa_sflight-paymentsum < 1000000.
 g_wa_sflight-traffic_light = '2'.
 ELSE.
 g_wa_sflight-traffic_light = '3'.
 ENDIF.
 MODIFY gi_sflight FROM g_wa_sflight.
 ENDLOOP.
Grid setup for first display
 CALL METHOD go_grid->set_table_for_first_display
 EXPORTING i_structure_name = 'SFLIGHT'
 is_variant = l_layout
 i_save = 'A'
 is_layout = gs_layout
 CHANGING it_outtab = gi_sflight.
 *-- End of grid setup -
Raise event toolbar to show the modified toolbar
 CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
 CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
 ENDIF.
 ENDMODULE. " STATUS_0100 OUTPUT
 *& Module USER_COMMAND_0200 INPUT
 MODULE user_command_0200 INPUT.
 CASE ok_code.
 WHEN 'EXIT200'.
 LEAVE TO SCREEN 100.
 WHEN'SAVE'.
 PERFORM save_changes.
 ENDCASE.
 ENDMODULE. " USER_COMMAND_0200 INPUT
 *& Form get_data
 FORM get_data.
Read data from table SFLIGHT
 SELECT *
 FROM zsflight
 INTO TABLE gi_sflight.
 ENDFORM. " load_data_into_grid
 *& Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
 FORM change_flight.
 DATA:l_lines TYPE i.
 REFRESH gi_index_rows.
 CLEAR g_selected_row.
Read index of selected rows
 CALL METHOD go_grid->get_selected_rows
 IMPORTING
 et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
 DESCRIBE TABLE gi_index_rows LINES l_lines.
 IF l_lines = 0.
 CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
 EXPORTING
 textline1 = 'You must choose a line'.
 EXIT.
 ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
 LOOP AT gi_index_rows INTO g_selected_row.
 IF sy-tabix = 1.
 READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
 ENDIF.
 ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
 CLEAR g_screen200.
 MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
 LEAVE TO SCREEN '200'.
 ENDFORM. " change_flight
 *& Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
 FORM save_changes.
 DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
 MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
 MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
 IF g_wa_sflight-paymentsum < 100000.
 g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
 g_wa_sflight-line_color = 'C610'.
 ELSEIF g_wa_sflight-paymentsum => 100000 AND
 g_wa_sflight-paymentsum < 1000000.
 g_wa_sflight-traffic_light = '2'.
 clear g_wa_sflight-line_color.
 ELSE.
 g_wa_sflight-traffic_light = '3'.
 clear g_wa_sflight-line_color.
 ENDIF.
 MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
 CALL METHOD go_grid->refresh_table_display.
 CALL METHOD cl_gui_cfw=>flush.
 LEAVE TO SCREEN '100'.
 ENDFORM. " save_changes

Profit Center Report not include the Invoices entry

Hi Expert,
I want the report of my profit center which will show profit centre details including the dimension.
I have run the following report but not fulfill the requirements
1.The u201CProfit centre reportu201D in this report only u201CJEu201D is comes in report & Invoices post for the u201CProfit centre(Dimension1, Dimension2,Dimension3) u201Cis not included in that report.
2.The u201CGeneral ledgeru201D report it will give the details of invoices but ,it is not showing the Dim1,Dim2,Dim3 in the available column of report.
Plese help me on this.Sap version 8.8 patch 15.

Hi,
You can create your own report by Crystal Report or query report.
Thanks,
Gordon

By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
Thanks
Jacky

Hi,
If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
Regards
Ray Farmer
Regards
Ray Farmer

Licence is not included for the material - J1IH

Hi All
We are working on ECC 6.0.
While doing J1IH ( Additional Excise) with Subtransaction Type 01, we are getting a warning message as -
Licence is not included for the material
Message no. 8I993
However if we process without any Subtransaction Type, no warning is flashed.
Please let me know the reason for the same and what could be done so that system doesnt prompt it?
Regards
Kapil

Hi
Check SAP note 1223591
Regards
Antony

F10-136 Transmitter cable not included?

Similar Messages

Maybe you are looking for