F11 is not working

hi! i have hp probook530s. i fomatted my drive C: and installed Windows 7 ,but after few days i wanted to come back to recover my laptop to the factory by using f11 but it wouldnt work.please guide me

Hi,
Before trying either of the options below, make sure you have backed-up any personal folders etc that you wish to keep.
There are Two options to try and reinstall Windows - the 2nd is the easiest, but you may want to try the 1st to see if it will save you having to order a replacement set of Recovery Discs - make sure to back-up any important files first.
1.  Boot in to Windows, hold down the Windows Key and press R.  Into the Run Box type compmgmt.msc and hit enter.  Click Disk Management in the left pane and when the partitions have loaded, right click the Recovery Partition and mark it as 'Active'.  Close all open windows and then restart the notebook - if this has worked, the notebook will boot from the Recovery Partition upon restart.
2.  You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Reinstalling HP s3400f to new condition if F11 is not working

    How do I Restore the PC to 'New' condition if my F11 is not working? I've changed keyboards and found that it's not the keyboard.
    I guess another question would be: How do I get the F11 button to work?

    You must start tapping the F11 key when you boot the computer if your trying to do a Factory Restore.  If you are running Vista it would be F10.
    Did you creater recovery disks when you first got the computer?
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • F11 is not working properly in my hp pavillion g6

    my f11 key is not working well ....so my audio is not working well...cozz audio is attach with f11 key...suggest me now what to do pLz

    Hi Ankit_gupta,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6 Notebook and the keyboard not working correctly. Here is a link to Keyboard Troubleshooting.  You might have to uninstall the keyboard software it shows you this at the end on the links.
    Hope this is helpful.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • 'F11 key not working for reimaging hard drive on X201

    Hello to all,
    I I am having an issue with F11 key when booting up to engage in a recovery of factory partition of Windows 7 as it was shipped from factory, or as Lenovo calls it, Q drive. It is basically an image of Windows for reinstalling as was.
    For some reason unknown to me, it will not work. I get no response.  Can anyone suggest a way to either get my F11 key to bring up the desired screens for a new image procedure, or any workarounds to this? I cannot access this through ThinkVantage either, which is a Lenovo help program. I have not reinstalled any new OS, nor have I reinstalled any previous versions of images of same OS. I have the x64 version.
    I guess I could contact Lenovo and buy a new set of disks to do this, but it is too much money right now without trying something first.
    I really need to reimage my laptop, as my Windows 7 pro has some serious issues that only a new installation (or new image in this case) will solve. Any and all answers will be greatly appreciated, and yes, the Q drive is showing up in Disk Management as around 6 or 7 GB, yet I have no idea of how to initiate this process at bootup.
    Thanks in advance

    Hi greg30,
    it's possible that the F11 function has been corrupted, to check could you try the following please;  from a totally shut down state start the system and you should see a message stating "To interrupt normal start up........." do you see this message?
    If you do see the message it should be telling you to press the blue ThinkVantage button which is at the rear left side of the keyboard.  When you press the button it should then offer you a menu with different options including F1 for BIOS, F12 for boot menu and F11 to recover system.  If when you press the blue ThinkVantage button does it offer you the F11 option?
    Regarding creating recovery discs.  In Windows could  you take a look to see if you have the following or similar, (working from memory here),  hopefully similar to;  Start > Programs > Lenovo ThinkVantage (Tools / Technology) [or similar] > Create Recovery Media.
    Using Acronis to clone the drive will only give you what you have; something may be missing from the boot sector if the above doesn't help.  It may be possible to repair the boot sector which could be tried if all of the above fails, but I confess to never having had to do so.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • CTRL+F11 does not work

    Hi,
    When ever I try to query the request its shows an error
    Steps to reproduce the error:
    1) Select sysadmin resp
    2) Select concrrent request
    3) click on find request ( I can find all my requests)
    4) A new form is opened , just say F11 to get into query mode
    5) please enter % in any feild and execute it
    I have the below error
    "please fill inthe selective in atleast one of the the following feilds for performance reasons"
    It was working before the upgrade.
    Changes upgrade patchset level 18 to 19.
    And if the format is x% it works
    it does not work when I give %x .. It is not accepting first character as wild character
    Thanks

    Hi 123;
    Please check below
    How to Change / Customize the Key Mappings (F10, F11, etc.) for Forms in E-business Suite [ID 782325.1]
    How to Change / Customize the Key Mappings for Webforms? [ID 209671.1]
    Using Forms 9.0.4.2 or Higher [Shift F10] & [Shift Ctrl F10] Key Mappings No Longer Work [ID 340651.1] << could be similar as yours
    Also check [this page|http://oracle-magic.blogspot.com/2007/01/do-you-want-to-remap-your-keyboard-keys.html] << as you can see you can check related fmrweb.res file(take backup first) for your issue
    Hope it helps
    Regard
    Helios

  • Factory reset problems f11 function not working

    I have a pavilion zv5000 running windows xp and im trying to do a factory reset and the f11 function while booting will not work. can anyone help. 

    Hi deadweight1102, welcome to the HP Forums.  I understand you are unable to perform a factory reset. If the computer shows you the F11 option to do a factory reset, and it is not responding, then it is possible the recovery partition is damaged or non-existent.
    Do you have recovery media, or Windows XP disks?
    FAQ On Repairing Or Reinstalling The Operating System
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • PAVILION P6-2002es F11 KEY NOT WORKING. HOW I CAN GET IT working AGAIN

    Hi all. My pc isn`t working the f11 recovery key. The partition is right but I can`t restore de system because the f11 key do not work. The system don`t start. How I get use de recovery partition?

    I see no mention of trying the Recovery disk set, so I assume those were not made.  First thing would be to try to enter the BIOS to see what information is still available.  If the PC can do that there might be a possible solution.  Report back with results.

  • F11 key not working to clear desktop

    All of a sudden, my F11 key does not work to clear my desktop. Is anyone else having this problem? Is there a fix for it? I use this all the time.

    First, go to System Preferences>Keyboard and Mouse pane. Select the "Keyboard Shortcuts" tab. Hit the "Restore Defaults" button.
    If that fails, go to your Home/Library/Preferences folder, and remove "com.apple.finder.plist to the trash. Restart.

  • F11 key not working

    Hi,
    I use iMac USB keyboard with Num Pad and my keyboard had a liquid damage. Now my F11 (Volume Down) key doesn't work. Can I map  it to a different key/key combination. How do I do that?
    Thanks in advance
    KBajpai

    Hi greg30,
    it's possible that the F11 function has been corrupted, to check could you try the following please;  from a totally shut down state start the system and you should see a message stating "To interrupt normal start up........." do you see this message?
    If you do see the message it should be telling you to press the blue ThinkVantage button which is at the rear left side of the keyboard.  When you press the button it should then offer you a menu with different options including F1 for BIOS, F12 for boot menu and F11 to recover system.  If when you press the blue ThinkVantage button does it offer you the F11 option?
    Regarding creating recovery discs.  In Windows could  you take a look to see if you have the following or similar, (working from memory here),  hopefully similar to;  Start > Programs > Lenovo ThinkVantage (Tools / Technology) [or similar] > Create Recovery Media.
    Using Acronis to clone the drive will only give you what you have; something may be missing from the boot sector if the above doesn't help.  It may be possible to repair the boot sector which could be tried if all of the above fails, but I confess to never having had to do so.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • T440s/fn + F4, F9, F10, F11, F12 not working

    Hello,Having installed the hotkey driver (http://support.lenovo.com/us/en/downloads/ds029026), can't get microphone/F4 to be muted. However, the volume keys work ..can mute speaker using F1 , F2 and such. Have got Window 8.1 with the latest patches.  Apprecate any help.   

    use Fn+Esc, it combination enable/disable FnLk mode if FnLk mode is disabled you can use simple F1, F2, etc for enable/disable sound, less sound power, etcif FnLk mode is enabled you can use Fn+F1, Fn+F2, etc for enable/disable sound, less sound power, etc  

  • F11 (query mode) not working in payment form in AP

    Dear All,
    F11 function not working in Payment form in R12.
    I made a payment and quit the form. Whem am trying to query the payment invoice to void it. F11 functionality is not working.
    Could anyone tell me the solution?
    Regards
    Deeps.

    Hi Ivruksha,
    Thanks for your response.
    This issue is due to personalization done in payment form to default the payment date. First we defaulted the payment date once we open the form and faced issue in Quering a payment.
    Now we did a change in personalization to default after selecting the Trading Partner and rectified the issue.
    Regards,
    Deeps.

  • Execute Query not working on custom forms

    Hi
    After upgrading from 11.5.10.2 and Oracle 9.2.0.5 to ATG6, AD6, oracle 10.2.0.4, Forms 6.0 (Form Compiler) Version 6.0.8.28.0 . The execute query (F11 & CTRL F11) is not working on custom forms. But after tabbing from one column to another column then press CTRL F11 is working.
    Please any one help me on this issue.
    Thanks
    sva

    Hi
    I found this error in the trace file. Please help me what is the problem, the data is there in the table.
    Out Argument 0 - Type: String Value: ORA-01403: no data found
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: parameter.G_query_find
    Out Argument 0 - Type: String Value: NULL
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND MESSAGE_CLEAR
    MCXQPBULKINVOICEENTER, -1, Built-In, Entry, -1196178744, USER_EXIT
    TSE FSERVER_START -1 1407 1279530838565801000
    TSE FSERVER_END -1 0 1279530838579778000MCXQPBULKINVOICEENTER, -1, Built-In, Exit, -1196091744, USER_EXIT
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_debug.clear
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_GROUP Built-in:
    In Argument 0 - Type: String Value: APP_DEBUG
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_debug.free.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing MESSAGE Built-in:
    In Argument 0 - Type: String Value: FRM-41003: This function cannot be performed here.
    In Argument 1 - Type: Number Value: 121
    Unhandled Exception ORA-100501
    State Delta:
    MCXQPBULKINVOICEENTER, -2, Trigger, Exit, -1190876744, ON-ERROR
    ##### CTIME STARTS HERE
    # 8 - MCXQPBULKINVOICEENTER:BLOCKNAME.RADIO_BUTTON81.1279530839956685000
    KEY Execute_query
    Error Message: FRM-41003: This function cannot be performed here.
    N-ERROR Trigger Fired:
    Form: MCXQPBULKINVOICEENTER
    State Delta:
    MCXQPBULKINVOICEENTER, -2, Trigger, Entry, 181183256, ON-ERROR
    MCXQPBULKINVOICEENTER, -1, Prog Unit, Entry, 181304256, /MCXQPBULKINVOICEENTER-3/P58_07_DEC_200909_04_40
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_standard.event. Event is ON-ERROR.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing ERROR_TYPE Built-in:
    Out Argument 0 - Type: String Value: FRM
    Executing ERROR_CODE Built-in:
    Out Argument 0 - Type: Number Value: 41003
    Executing ERROR_TEXT Built-in:
    Out Argument 0 - Type: String Value: This function cannot be performed here
    Thanks
    sva

  • Not Start up, Key board and Mouse not WORKING

    I have Pavilion G7-2017us Notebook and it has Windows 7 operation system. Symptom: Start the computer, go through to the windowns log-in page, but Keyboard and mouse are frozen, not WORKING. Can't log in. 
    force Poweroff computer and use ESC, F9 can go to system diagnose page, keyboard and mouse are WORKING now. Tried "Start-up test",
    Processor Check,Memory Test, Hard Disk SMART Check are Passed. Only Hard Disk Short DST is failed. Failure ID : GLMP00-69B7NV-MFPX1G-60SJ03
    So Start-up test is FAILED. Tried "System Tune-up", Processor Check,Hard Disk SMART Check are Passed. Only Hard Disk Short DST is failed.
    Failure ID : GLMP00-69B7NV-MFPX1G-60SJ03.So System Tune-up Is FAILED. Tried "Hard Disk Test", Hard Disk SMART Check is Passed and Only Hard Disk Short DST is failed.Failure ID : GLMP00-69B7NV-MFPX1G-60SJ03.
    So Hard Disk Test Is FAILED. When I performed above test, keyboard and mouse were WORKING properly. Tried Safe mode, but can not log-in because keyboard and mouse are not working at that time. I cared about documents and was able to copy some files to external harddisk under DOS command interface. But right now I can not adjust
    this laptop back to normal DOS from safe mode log-in. When I started up it. it goes through to log-in page in Safe mode. Also F11 is not
    working because I did not make system recovery point and it can not be recoveried. Please help me for this issue. Thank you very much.

    Thank you, Visruth.    When you said the failure ID indicates failling or failed HDD, do you mean that the old HDD is bad and probably all the data on it will be lost ?    Yes, in order to salvage data from the old HDD,  I have tried to buy an external enclosure and take that harddrive out to make an external hard drive. Connect it through USB , but the new laptop can not recognize it and I can see this external hard drive shown in the device manager, but I can not see more detailed information of that drive. Click it and it asks that do you want to format that drive?      So I would like to salvage data from the old HDD. I have been able to enter into DOS command in the old laptop and copied all data on my desktop in C drive. But right now I have forced this old laptop to run into safe mode, which I think maybe I have a chance. But keyboard and mouse are still frozen at log-in page. I do not know how to get back to DOS command as I did before. If I can go back to DOS command, I may use DOS Xcopy to copy out all my data in the old HDD to new external drive. Would you please show me how to get back to DOS command from safe mode log in? I have tried F8, F9. no success.   Another way I am thinking is that to take the old HDD as an external drive, connect to a new laptop, change that new laptop's start up sequence, put the USB external drive start up as the first choice. I really do not know why my keyboard and mouse in the old laoptop do not work at some time (log-in page). Please let me know your advice. Thank you very much. 

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • F11 Functionality is not working

    Hi,
    I am working on 11.5.10.2 version.
    In the Oracle Payables Invoice screen the F11 functionality is not working
    For other screens like supplier entry / payment batches..etc, the F11 functionality is working.
    When i enter the Invoice screen, i am pressing F11 and it comes to query mode.
    I am giving the values and percentage, pressing Ctrl+F11 but its not showing the invoice data.
    Error Notification given: "FRM-40301: Query caused no records to be retrieved. Re-enter."
    Earlier its working fine...suddenly its giving me this trouble. I am able to query same thing in my friends system.
    I know its quite silly issue but its really giving me a trouble. Could anyone give the solution for this. Is there any specific functionality am need to set for this?
    Thanks,
    Ram.

    The query is working if you are getting the message "FRM-40301: Query caused no records to be retrieved. Re-enter." You need to query for something that is in the tables which is usually case sensitive.
    Or, use the Query/Find screen by clicking the Find button (flashlight icon) on the toolbar.

Maybe you are looking for