"F11 System Recovery" during boot does not work after Cloning hard drive.
Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.
Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
Time Machine does not start after external hard drive is connected
Time Machine does not start after external hard drive is connected
These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
Also bear in mind that:
1. restoring data over icloud takes time
2. iCloud is not designed as a replacement to Time Machine. -
Screen not working after new hard drive installed
Hi,
Can anyone help me, I just replaced my hard drive on my 15" G4 Aluminum Power Book as it had crashed and died on me. When I finished installing the new hard drive, when switching it on the screen remains blank. Does anyone have any Ideas why and how to get it working again. The screen was working before the hard drive crash. Any help will be much appreciated.
Thanks
RobbyHere are the factory specs for your HP Pavilion dv6-1210sa Entertainment Notebook Computer. Based on the specs, the original hard drive was 250GB. This could be a factor in your issue. It could also be that the drive is an advanced format (AF) drive. Please provide the model of the drive for our review.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Boot disc not working on new hard drive
I have a Macbook Pro 5,5. My harddrive went bad and I replaced it with a new 500 HDD harddrive. When I put in my Mac OS X Install Disc 1 (Mac OS Version 10.4.10) and hold down the "C" key after the chime, all I get is the same white screen that initially starts up when I turn it on. The folder with a question mark doesnt show up (if I restart computer without install disc I will get the folder with question mark flashing however), and the disc drive will allow me to eject it fine if I restart and hold down the mouse, so I dont think it is the optical drive. Thoughts on whats going on?
Solution:
1. System Preferences > Spotlight > Privacy
2. Drag and drop or add your external hard drive in the Privacy window. This will reset the old preference.
3. Then remove the external hard and close the System Preferences.
4. Wait for 30 seconds. Spotlight will start indexing of your external hard drive.
Update: It's supposed to scan for 8 hours but it took only 15 minutes and stopped. I tested the search and it's still not working. It's strange that it works on my other two external hard drives (USB and Firewire) but not this particular one (USB). I have three external hard drives. -
System restore on DV6 not working after new hard drive installed (Vista 32-bit)
Hi there,
I have a HP Pavilion Entertainment laptop (DV6 1210sa) and recently on start up I have been receiving a message saying that the hard drive is at imminent risk of failure. I therefore burned the restore CDs and bought a new hard drive: (A Toshiba 2.5 inch 80gb SATA hard drive 5400 RPM). The first part of the restore completes successfully then the HP screen appears after a restart and then goes to install windows, but before this begins I receive a message saying “Windows setup could not configure windows to run on this computer.” I then have to restart and get the same message. Is this drive somehow incompatible? Is there something I’m missing?
Thanks in advanceHere are the factory specs for your HP Pavilion dv6-1210sa Entertainment Notebook Computer. Based on the specs, the original hard drive was 250GB. This could be a factor in your issue. It could also be that the drive is an advanced format (AF) drive. Please provide the model of the drive for our review.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
[SOLVED] Windows Update not working after Cloning Hard Disk!
Lenovo T61p with Intel Turbo Memory - Cloning HDD with Advanced Format (4K Cluster) HDD
I have been beating my head against my desk for the past day trying to figure out the problems I am having.
I have a Genuine Windows 7 Ultimate Installation
I cloned my old 100GB HDD onto a 500GB HDD to increase space however after doing so I am unable to update windows, turn windows defender on, or install any Microsoft Products. I am even unable to install WindowsActivationUpdate or Microsoft Security Essentials.
I have tried many FixIt tools to no avail.
I have run SFC /SCANNOW
I have run CHKDSK
I am stumped.
****RESOLUTION****
After doing some digging I found the solution. Since I had cloned the drive, the old AHCI driver wasn't updating Windows with the correct sector size. Updating the AHCI driver with the latest from Intel solved all the issues I was having.
**Note**
Install the Lenovo Driver First -- Reboot
Lenovo Driver: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS001676
Install the AHCI Driver Manually (iaAHCI.inf - Do this in Device Manager) -- Reboot
Intel AHCI RST Driver: http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20110
***DO NOT INSTALL RST GUI IT WILL REMOVE TURBO MEMORY DRIVERS!!!***
Windows Update = Working
Windows Defender = Updating
Windows Installations = Working
****RESOLUTION****
My MGADiag:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-9X7JB-XQDHB-C2W6B
Windows Product Key Hash: Dy1vngm6F92cujl9L9xOYdanfdU=
Windows Product ID: 00426-292-1299966-85765
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {13F339C5-D5B9-41FD-8A7B-1238231C5332}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.120503-2030
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{13F339C5-D5B9-41FD-8A7B-1238231C5332}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-C2W6B</PKey><PID>00426-292-1299966-85765</PID><PIDType>5</PIDType><SID>S-1-5-21-2451738923-860975475-1044764223</SID><SYSTEM><Manufacturer>LENOVO</Manufacturer><Model>6459CTO</Model></SYSTEM><BIOS><Manufacturer>LENOVO</Manufacturer><Version>7LETC9WW (2.29 )</Version><SMBIOSVersion major="2" minor="4"/><Date>20110318000000.000000+000</Date></BIOS><HWID>7E6A3B07018400FA</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>LENOVO</OEMID><OEMTableID>TP-7L </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, RETAIL channel
Activation ID: ac96e1a8-6cc4-4310-a4ff-332ce77fb5b8
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00170-292-129996-00-1033-7600.0000-3502010
Installation ID: 006331326732895831680071837781562523717002697036843352
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: C2W6B
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 06/19/2012 00:04:42
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: N/A
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys
HWID Data-->
HWID Hash Current: OAAAAAEABgABAAEAAQABAAAAAgABAAEA6GFizC3FgIUan7BULghGgwAtOoH6Et7WRgY2FRoIKoU=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x0
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC LENOVO TP-7L
FACP LENOVO TP-7L
HPET LENOVO TP-7L
BOOT LENOVO TP-7L
MCFG LENOVO TP-7L
SSDT LENOVO TP-7L
ECDT LENOVO TP-7L
TCPA LENOVO TP-7L
SLIC LENOVO TP-7L
ASF! LENOVO TP-7L
SSDT LENOVO TP-7L
SSDT LENOVO TP-7L
SSDT LENOVO TP-7L
SSDT LENOVO TP-7L
Tried this:
1) Open an Internet Browser
2) Type: %windir%\system32 into the browser address bar.
3) Find the file CMD.exe
4) Right-Click on CMD.exe and select 'Run as Administrator'
5) Type: net stop sppsvc (It may ask you if you are sure, select yes)
Note: the Software Protection servive may not be running, this is ok.
6) Type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform
7) Type: rename tokens.dat tokens.bar
8) Type: %windir%\system32
9) Type: net start sppsvc
10) Type: slui.exe
11) After a couple of seconds Windows Activation dialog will appear. You may be asked to re-activate and/or re-enter your product key or Activation may occur automaticly.
But it still says Windows 7 Activation was Successful.I only discovered this problem a month after replacing my system HDD with an ssd Drive for a Vista sp2 Dell studio 1735 . But in my case all drivers were up to date. However this post triggered the right path to a solution. Though it is more
a workaround ... . Perhaps this will help others, an even more perhaps bring a microsoft engineer to make a small adaption to the vista windows update tool ....
So the problem seems that Windows Update checks for its datastore if the file is alined with the HDD underneath. But it seems that this check fails for an ssd with a 4K sector size.
Lucky I had another HDD in my laptop, which is required for this work around to work :-(. So the following shows the problem (and I think Windows Update does an alike test).
cd \windows\SDold\DataStore (so use cd \windows\SoftwareDistribution\DataStore if you didn't try the "ren" action yet as mentioned in many posts)
esentutl /g DataStore.edb -> (result) Operation terminated with error -583 (JET_errSectorSizeNotSupported, The physical sector size reported by the disk subsystem, is unsupported by ESE for a specific file type.) after 0.15 seconds.
cd D:\ (to a 512 byte sectored HDD )
esentutl /g C:\Windows\SDold\DataStore\DataStore.edb -> (succeeds! normal verification output)
So I tried (the junction tool can be downloaded from sysinternals):
net stop cryptsvc
net stop wuauserv
robocopy /mir C:\Windows\SDold\DataStore D:\DataStore
robocopy /mir C:\Windows\system32\catroot2 D:\catroot2 (I now think this is not needed, but I started with an Technet post (and many others ...) that put me on the esentutl track... , which is also why the "net stop cryptsvc" is present.)
C:
cd ..\SoftwareDistribution
rmdir /s /q DataStore
junction DataStore D:\DataStore
cd ..\system32 ( again not sure if needed, also counts for the next 2 commands).
rmdir /s /q catroot2
junction catroot2 D:\catroot2
net start cryptsvc
net start wuauserv
And windows update worked again ! Check the C:\windows\WindowsUpdate.log
Of course this is just a workaround, but perhaps this puts another searcher on the right track. And perhaps it makes a Microsoft engineer update the responsible code ... as to be aligned on disk does not seem crucial for the databases used for this "application"
Sorry had to remove links for sysinternals and cc734083(v=ws.10).aspx (esentutl, which is a vista specific command) both Microsoft links, as Microsoft has not yet verified my account ... -
My sound system does not work AFTER installing pc to tv wireless connection
my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.
Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
My camera does not work after I restored the system, how can I use it again?
My camera does not work after I restored the system, how can I use it again?
Thank you for your help!Did try to restore "as new device" without using the backup after that?
Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again? -
Satellite L870-165 does not work after being repaired by their service
Laptop Toshiba warranty does not work after being repaired by their service twice.
Model: Satellite L870-165
Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
After reboot still happening the same.
I called Toshiba phone incident and after trying several options I said take him to repair the service.
They first told me it was the hard drive, then phoned me to indicate that reinstalling and finally it was the motherboard, which supposedly changed. The day after being picked computer repair returned to give exactly the same error, only malfunctioned one evening.
After another call to 902 the Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I got home the computer did not start even once, again gives the same error.
I believe that this team comes with a factory default so that its solution is not easy because even the technical service told me that I did not know what else to do with it.>Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
This message pops up because the notebook cannot find the Windows system.
There could be either an problem with the HDD or maybe the HDD is OK but the Windows system isnt preinstalled properly.
You said that the service agent changed the HDD. But did someone install the Windows system?
You can try to do it yourself take your recovery disk (hopefully you created such disk in the past) and boot from the recovery disk in order to install the system.
In case booting from the Disk would not be possible, go to BIOS (F2) and disable the secure boot and change from UEFI to CSM mode -
My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?
The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367 -
My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.
after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood! -
Satellite A110-228 LAN does not work after hibernate
Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm BoerhoutHi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box. -
Card slot does not work after update (14/10/2011)
Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
MacBook Pro 13 OS ver. 10.6.8Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks
-
My Hot Spot does not work after update to 6.0.1. Any suggestions?
Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal. -
Click to activate does not work after update
Click to activate plugin does not work after updating to version 23.0.1
hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.
Maybe you are looking for
-
Even after following all of the steps, CC still will not let me sign in
My problem is that even after following all of these steps to the T (the steps are here: You are no longer signed into your Creative Cloud applications), including the showing hidden files part, Creative Cloud will still not let me sign in.
-
Update PSD en Illustrator imports in Flash not working???
CS4 . When I import an image in flash and make changes to that image, in PSD par example, I can easily update that image in the Flash library, by just clicking on it. The changes are imediately effective...NICE!!!! But when I import psd-files, layers
-
A few days ago, my computer crashed, and being the Deadmau5 fan that I am, I can't survive without my concert DVDs. So I deleted all my photography apps (using the iPhone, of course) to make room for a concert movie. I didn't delete any music because
-
I just want to know if anyone else has been having these issues too, because all they seem to do is pile up with every update. Let's go back to 10.6.4... First, I got it, and as soon as I did, my sleep light stops working and the computer takes forev
-
CS3 Custom cursor acting wierd
Hello, I am a student in an animation class; our current project is making a website portfolio. I have discovered some sort of bug or something to that effect, inside of my custom cursor is a button, this button contains a click function. When I cl