F110 APP run - Payment run has been scheduled, but job was not released
Dear Friends,
We have made payment parameters, payment proposal, edit payment proposal and it was working fine upto that stage.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
But when we selected payment run, immediately it showed the below status:
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Also I'm not able to delete the Payment run made, fields are in disabled mode.
Please guide me how to resolve this issue.
Thanks in advance for your help.
Regards,
Dwarak.
Dear Supriya,
Thanks a lot for your immediate response.
Still the same problem is existing even after one and half hours.
ie.,
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Could you please let me know which Tcode we have to go to release this inorder to solve this issue.
As it is in the production client, it would be really helpful if you could let me know the details at the earliest.
Thanks again.
Regards,
Dwarak.
Similar Messages
-
HT4484 my apple id has been disabled but it was not me how to i start it up again
my apple id has been disabled i do not know why as it was not me how do i start up again
Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue. -
I tried to buy the WhatsApp app. The card has been charged. but the app wasnt downloaded.i need help Urgently.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
To see which iOS version is installed, tap Settings > General > About -
Proposal has been sheduled, job was not released
Dear Fi Experts,
In F110- Automatic payment process, while creating proposal the system throwing error
Proposal has been shedulded 03.03.11 10:06:27
Job was not released
Parameters maintained in the prosal is correct, payment method, vendor balance and additional log
while saving the prosal system throwing the error. Same i tried in the quality server its working fine.
Can you explain why it happens?
Thanks and Regards
J.FrancisHi J. Francis,
It can be some authorization issue, I recommend you to check this with your basis team.
Also check these authorization objects:
S_CTS_ADMI
S_BTCH_ADM
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista -
error message says "an ipod has been detected but it could not be identified. We've disconnected the ipod and reconnected it but it hasn't worked.
If the iPod was originally formated to your computer, restart your computer. If not - How to use your iPod to move your music to a new computer
-
In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.I have same error except that i get it even when my phone is not connected.
-
"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.
Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari -
"An iPod has been detected, but it could not be identified properly" error
We have had five iPod Nano's installed via our home computer (Dell PC - Windows Vista):
one 2nd generation (currently being used)
one 3rd generation (not in use - was lost)
one 4th generation (not in use - was stolen)
two 5th generations (currently being used)
The iTunes 10.0.1 Update was installed during the first of the two 5th geneartions installation process.
We recently bought another 5th generation. When we went to install it, we received the error message "An iPod has been detected, but it could not be identified properly". The 2nd generation can access the entire library and download music but the two 5th generations are no longer able to access the library and download music. Basically, they can only be used to listen to the current music within does 5th generation iPod Nano's.
We tried everything that's been recommended in the Support section but nothing has worked in order to restore the capability of accessing the library and downloading music for the 2 generations....This is where we need HELP!!!
As for the new 5th generation, we have installed it into our laptop instead with no problems (so far). We've read that there is a way to move the iTunes Library from one computer to another which we hope this will be an option once we fix the issue of the two 5th generations.
If anyone can provide any recommendations please post. We have spent the better part of our weekend trying to fix this problem with alot of frustration along the way.
Thank youUninstall everything from your pc that is published by Apple. This includes; iTunes, Quicktime, and Bonjour. I also had this problem and it is VERY frustrating. Then re-install iTunes of course.
-
I have uninstalled and reinstalled itunes and I am still getting this error message. An iPod has been detected, but it could not be identified properly. Please disonnect and reconnect the iPod, then try again.
Hey there gentzdo,
Welcome to Apple Support Communities.
This article provides information and troubleshooting tips that'll resolve most issues like the one that you've described, where your iPod nano isn't identified properly by iTunes.
iPod nano: Error message saying that iPod could not be identified properly - Apple Support
Cheers,
-Jason -
"An ipod has been detected, but it could not be identified properly. Please disconnect an reconnect the iPod, then try again. An unknown error occured (2005)."
What does this mean? I have an iPod shuffle 4th gen but its not detected in itunes... it can only be seen in the device manager, but I can't see it on the task bar. Can anyone please help me?I have same error except that i get it even when my phone is not connected.
-
I get an error message - an I pod has been detected but it could not be identified properly this happened after I downloaded a newer version of I Tunes does anybody have a quick fix??
Hi positive29,
Welcome to the Apple Support Communities!
I understand situations like yours can be very frustrating. I would recommend the attached article to help you troubleshoot and resolve this issue.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Have a great day,
Joe -
When I hooked up my new Ipod Nano, The message in I-Tunes reads, "An I-Pod has been detected but Itunes does not recognize the device" Any ideas to help?
Hi mulebacker,
Here is an article that provides troubleshooting steps for this message:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/ts3218
Cheers!
- Ari -
An iphone has been detected but it could not be identified
hi,
since i updated my itunes in the beginning of may, my iphone is not recognized by itunes anymore. i have been searching for a solution on this for almost two months now, but none of the tipps i found does work. i allways get the message, that the phone has been detected, but cannot be identified. the phone is recognized by windows and i can see it in the device manager. but itunes wont recognize it.
i found a ton of solutions for this problem and tried everything. from fully removing all apple software, changing the usb-cable, changing the port, pulling out all other usb-devices, updating the mobile device driver, restoring the phone, installing an older itunes version and so on. it just doesnt work. the only time it is recognized in itunes, is when i am in recovery mode. but when i reset the phone it's gone after the restart of the device, and i get the same message as always.
the funny thing: a friend of mine has the same problem with his 3GS (i tried it both with my 3G and the new 4). he's also using a sony vaio VGN-FZ31J with vista running (i'm using vista business, he's using vista home). BUT: if i plug my phone into my girlfriends vaio (also with vista home) everything works fine.
do you have any suggestions what i can try to get it to work again?On the new account, can iTunes connect to the internet properly?
Firewall blocking outgoing connections of iTunes? -
what do i do when i try to open my ipod nano in itunes and it says "an ipod has been detected, but could not ne identified properly"
Hello rachel167,
I would use this:
iPod nano: Error message saying that iPod 'could not be identified ...
Ensure you use every step.
Hope this helps.
~Julian -
It says that my apple ID verification email has been sent but I have not received it yet.
It says that my apple ID verification email has been sent but i haven't gotten it yet. Please help
cmace489 wrote:
I am having the same problem and I've checked my spam folder. It isn't there either.
You've replied to a six month old topic that is marked Solved which will get passed by. You'll get better attention by starting your own topic.
If you didn't receive your Apple ID verification or reset email
Maybe you are looking for
-
An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and
-
ITunes crashes loading Store on Windows 8 64-bit
I have iTunes 11.1.4 installed on a Lenovo X1 Carbon with Windows 8 64-bit. It will start and I can play music, sync devices, and update existing applications. Unfortunately, it crashes every time I try to load the store. I have tried launching in sa
-
I downloaded a rental movie to I-tunes and can't transfer it to my Iphone 4S. Anyone know how to do this? When I download a rental directly to my phone it never dissapears and I have to restore my phone to get the movie off and free up the space.
-
Lookup column in calculated column formula
I have a Lookup column(Discountfirst) which has Number. I also have another Calculated column(Finaldate) with Resulttype DateTime. One more column(DateofReceipt) in Date. My Calculated column formula looks like this =(DateofReceipt)+(Discountfirst).
-
Unified communication certificates (UCC) : SSSLERR_SERVER_CERT_MISMATCH
Hello , We are using UCC (unified communication certificates) which allows us to include multiple domains controlled in a single certificate. http://help.godaddy.com/article/3908 We are trying to setup a secure connection from SAP ECC6 (Abap stack 7.