F110 - Automatic payment. How to restrict picking up payments say,$10.

Hi Everyone,
Automatic Payment proposals when run, currently picks up all amounts including little cents like , 0.35. The payment method is Check and this involves cutting cheques for very small amounts.
How to restrict the program from picking up amounts say for eg , between 0 and $10 ..? Is there any settings we can use for this..?
Thnaks,
Jaya

Hi,
Thanx..But if I put a minimum amount here, even my GST payments don't get processed with small payments.
Is there a way to restrict it for some payments alone..? Here the problem is there are Vendor payments and GST payments and we want to restrict it only for vendor payments involving smaller amounts.
Rgds,
Jaya

Similar Messages

F110 AUTOMATIC PAYMENT PROGRAM NOT PICKING PAYMENT METHOD

hi guru's
F110 - Running payment program proposal list going to exeption list , House bank not picking up from VENDOR master. if not maintaing house bank in vendor master
proposal list is coming but 2nd house bank picking but i need 1 house bank. i maintained ranking order in FBZP.
pls suggest me this issue.
raj.

Hi,
I had an other problem with payment methods and in that case it was important how you fill it in the vendor and in the payment run. prhaps this helps you to found a solution or to understand how it is working
I have set-up a new payment method "E" for splitting euro payments under EUR 50,000 (K is for the other and non iban payments)
For this I have made the following settings in the Bank determination:
PM Rank order House bank
E 1 733BE
K 2 733BE
In the vendor masterdata I will fill in EK (to make it easy for users)
When I run the payment method with KE the system is using K and not E. when I fill in EK the IBAN payments are going with E and and the other one's with K what is correct.
Why is the Rank order not working for this? (look first to E and when E is not permitted go use K)
Paul

How to check F110 - automatic payment transaction

Dear gurus,
I had to execute the T-code F110 ("automatic payment transaction).
I'd like to check/verify if I have correctly entering the datas.
Is there a mean to check?
After throwing the proposal and the payment I have the following message : "Posting orders: 2 generated, 2 completed".
What does it mean?
How can I check/verify the recision of my enteries? Is there a transaction that I can execute to verify?
Thanks,
Regards,
gul

Hi
For the 'Red' Line item in F110, check the proposal log & the payment log for the details of the error message.
The error may be due to these common problems:
- Bank data not maintained properly
- Vendor master not updated for payment method or house bank
- house bank settings & FBZP configuration improper (go thro the FBZP settings fully for that payment code - house bank combination)
For the other open items in FBL1N which are not processed in F110, it may be due to the foll reasons:
- Either they are not due as on the date mentioned in F110
- Parameters enetered in F110 don't fufil those documents (like house bank, payment method, etc).
Regards
Srini

Run date problem in F110 - automatic payment program

Hi.
I am trying to run the automatic payment program in F110. I am facing the problem with the run date in this transaction. System is not giving me any error if i give the run date as today's date or future date.
But in run date if i give previous date system is not executing the automatic payment program.
Eg: Inovice posted on 01.01.2012. It becomes due on 01.01.2012. I gave run date as today's date 04.01.2012 or future date the system is executing correctly picking all invoices. But if i give the run date as previous to the current date i.e., 02.01.2012 or 03.01.2012 then system is not executing this transaction.
This problem is coming for all company codes. So if there is any setting for restricting run date request you to help me in this regard where can i do such setting.
Regards,
Padmavathi

Hi.
My problem is solved.
Actually client is entering the documents with posting date for earlier months whereas he has entered the documents this month.
Therefore system is not picking the invoices in F110 - automatic payment program.
Actually the run date entered is getting copied to the parameters entered i.e., posting date and documents entered upto date.
Documents are entered in the system this month with posting dates of previous months. Therefore if i give the run date as this month date the run date is getting copied to doc entered upto date in the parameters tab as this month date. So only system is not picking invoices since invoices are entered in the system this month only.
Now we changed the date for doc entered upto with previous month date and system is picking the invoices.
Thanks a lot for your help.
Regards,
Padmavathi

F110 - Automatic Payment (User Exit, BTE, BADI)

I have requirement after generating payment document by F110 automatic payment. I need to send data to other system.
How to get all payment documents? Can I use a BTE, User Exit or BADI? Kindly help me.

Hi ,
You can create a DMEE or genrate Idoc to another system .
If you want to send excel file then you can create a dmee file in transaction DMEE with same formt provided by bank/ another system .
many Thanks

Transaction F110 - Automatic Payment

Hi !
In Transaction F110 - Automatic Payment when i execute a proposal for payment of 'XXX' vendor, then in the execute of the next proposal vendor XXX won't participate despite i enter vendor XXX in the range of vendor select option field. Is in SAP away ( USER-EXIT, BADY, customization ) to prevent it ? meaning to cause SAP to participate a vendor also in next proposal ?
Please answer a detailed answer of how to do this.
thanks
moshe

Hi Solman,
Couldn't get your question, u are saying that u ahve assinged the vendor in a Payment run ,
Do u mean that u run a Payment run for a particule vendor and after finishing it
you again run the Payment proposal for the same vendor.
If you wish that the vendor you have entenred shouod eb stoed and used for the next payment run, i think thats not possible
Cheers
S
Message was edited by: sushi

Is Validation called in Transaction F110(Automatic Payment Run

Gurus,
Is Validation called in F110 (Automatic Payment Run) Transaction ?
If yes then how can i implement the following Validation ?
In F110 during Payment Proposal or Payment run time ,We have to allow specific user to process the Payment for the company code 1806 or 1809 and Payment method = 'Z'.
If Validation doesn't work in F110 then is there any user exit which i can use it for this purpose.
Thanks,
Siva

As payment run might posts interest documents based on the configuration. I guess it might get trigger. Am not sure.
Similar post, but without solutions.
Own Validation & Substitution - Urgent
Regds
Manohar

Cheque print from F110 (Automatic Payment Transaction)

Hello Friends,
I have a requirement to print the cheque from t.code F110 (Automatic Payment Transactions).
Normally when run Auto payment from F110 it will give A4 size print out at top having Address details and then item details, and finally Cheque data will print.
But our requirement is only Cheque print, we dont want to print total page.
For this Script is F110_PRENUM_CHCK and print program is RFFOUS_C.
can any one suggest me how to solve this issue.
Regards,

HI,
carry out the following changes with the help of the functinal guy around.
In F110 goto the Printout/data medium tab, there click on the Variant name against pgm - RFFOUS_C, say it is Z_VAR1, now click on the 'Maintain Variants' (pushbutton on tool bar)
This will take you to the Variant screen of this pgm,
Under the 'Print control' block deselect the 'Print payment summary'
Under the 'Output control' block change the value of 'Number of Sample printouts' to 1.
Hope this helps.

F110 Automatic payment cancel

Hi All,
User created vendor payments in F110, but not created the proposal and also payments went wrong and there all vendor open items cleared.
Actually as per the monthly schedule only selected items he need to clear.
So How to cancel the F110 payment and again how to do the same date (i.e. on 28.02.2014) payment?
Regards,
Raghu

Hi Raghu,
As Ajay mentioned, you Need to reset and reverse the Documents.
You can use F.80 for mass reversal of documents. However, for resetting, FBRA is the only Transaction.
BR
Amitash

F110- Automatic payment proposal

Dear All,
In Automatic payment proposal below are some issues.
1. whether it is possible that, upto specifc net due date document can be process/selected in proposal for payment?
2. Why after creation of proposal, documents posted through special G/L indicator were not selected for payment ?
3. If a vendor have document posted of Rs 100000 (Credit Balance/ payable) & Rs .20000 (debit balance / receivable) ,then proposal payment to vendor was Rs. 100000, not Rs .80000, Why this is happening.
Is there any SAP version issues.
Please reply.
Regards,
Avinash S.

Aziz,
1. How we can ensure the payment till specified date
2. We have specified the all Special G/L in T-Code FBZP, but it shows same error as per screen shot in point no.3.
3.We have assign the vendor in customer master & vice versa, still below error were faced.
a) Enter a payment method for incoming payment (Same error occured for point 2)
My question is if we are making vendor payment then why it is asking for incoming paymenrt instead of outgoing payment method.
b) If we assign the incoming payment method the it process incoming payment also outgoing payment as per below screen shot. Why it not club togather & make net payment.
Pls. reply.
Regards,
Avinash S.

F110 Automatic Payment: Create payment file and create remittance

Hello,
I'd like to know the steps to create payment file and remittances in Automatic payment process (F110).
Thanks in advance

Hello Emanula,
payment medium entries are customized in "payment method Country details". You have to decide whether you want to use the PMW or the classical paymentprogram.
The paymentadvices are generated from the paymentprogram by using the parameters from the CC-data of the paymentmethod - Box "Payment advice control".
At least: Don't forget to maintain the parameters in f110 "Printout/data medium"
Hope this gives you a help.
Best regards
Horst

F110-Automatic payment program payment made in other countries

I have 50 Company codes(Different countries) and one paying company code(US). Now i want to set up FBZP config. .. what should i do to enable the inter-country/inter-company payments using F110(Automatic Payment Program).

Hi Ashish,
In step 1 of FBZP, i.e. "All company code", when i try to enter a "New Entry", and when i try to set paying company code(which is in US) for other company codes that are outside US, i get the following error.
"Company code <paying company code> is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.
Please advice

F110 automatic Payment for Customer

Hi,
I want to pay to a customer for the credit memo thru' F110 automatic payment program.
If I maintain the document number in the 'free selection' tab then there is a error during proposal *'company codes xxxx/xxxx do not appear in the proposal 04.07.2008,test; correct'*, but if i do not maintain any document number then there is no error, the proposal is successful.
I have double checked the document numbers in the free selection tab.
Any help.
Thanks
Suresh

I noticed there was a mistake in the document number.

F110 (Automatic payment transactions)

Hi
I am having a problem using a transaction: F110 (Automatic payment transactions)
I need to create a payment method type D.
Configuration of Display proposal:
Customer:
                Doc. Number    Doc type       Debit/ Credit   Amount
     00000               CR                   H                     10,00
                00000               RV                   S                   166,67
When execute it:
     Result: It does not appear nothing in SP01 or SM37. I need to create the document to client get to pay.
What should I do ?

Hi Rukshana
There is a variant for the programs and I get to make a general proposal and generate a spool but only in this situation: Configuration of display proposal: When only have a Doc Number.
In my case I want to make a proposal using two doc. numbers Debit / Credit. Result: the payment document does not appear in the spool to client consequently there is not payment document to client.
Best regards
Edited by: Ailton Fabricio Dias on Jan 11, 2009 2:28 AM

F110 - Automatic Payment Run - Checks Will Not Print!!

Hi!
My client executed transaction F110 - Automatic Payment Run for a range of vendors (100000 - 599999). He was able to execute the run but could not print checks and found out that payments weren't assigned check numbers in the system. However, payments were cleared off the vendors account as if they had been paid.
Please help!!
Tks,
Deki

Hello
did you assign a variant in the prinout/data medium tab?
you need to assing the proper house bank, account id and check lot in this variant.
If this is correct then you should get the check number assigned to the payment
document #.
Points will be appreciated
Regards,
Zaid Azam

F110 - Automatic payment. How to restrict picking up payments say,$10.

Similar Messages

Maybe you are looking for