F110 payment run - split on invoice line item that exceed certain amount

Dear expert,
Now i want to ask is there any ways to configure F110 - payment run to auto checking on whenever the amount of one fi document is more than USD100,000 will auto split to second payment item.
*i have already tick individual pmnt on tcode FK02 - change vendor master data (at automatic payment transactions column). This method will split all fi document under same vendor post with different posting document number.
I would like to ask is there any way to configure auto split on the fi document (if the document is exceed some amount) for payment run.
thanks and appreciate

i have put distribution amount.
Let say i put distribution amount USD100, after i run payment run, one account payable document will generate one payment document.
As what i want is- if the ap document is USD 200, then the payment document will generate two payment document.
Coz my enquiry is if the payment is excedd USD100 we need to assign to another tt payment as the TT is only accept maximum USD100 transfer.
Expert, please advice on ur view.
Thanks and appreciate much on ur previous help.
regards,
Ng Chong Chuan

Similar Messages

F110 PAYMENT RUN NOT PICKING UP LINE ITEMS

Hi Everyone,
We use the APP functionality to pay customers credit memo. so when running F110, we indicate the credit memo document number in the further selection criteria in F110. It has always been working fine, but some customer that we have paid before, we ran F110 and it cleared some documents but did not clear the others. The line item is sitting in the customers account correctly and the payment terms is the one we have always used (2% 15 days net 30days).
What do you think i can check againg

hi Adeola,
See for running the F110 the payment must be overdue then only can able to run the APP run.
As you have mentioned in ur seetings only that the payment terms is set for 30 days.
As this payments is not yet overdue.
If you Run after 30 days then you can run the Payment run.
Please let me know, is this helpfull to u.....
Regards
Ranjit

F110 payment run - split vendor invoice

Dear,
For some vendors, the payment of the invoices should be split over 2 bank accounts.
Currently they clear the invoice via transaction FB05 and split the amount over 2 bankaccounts for this vendor. Then we do the payment run.
This works fine but they loose a lot of time with this process.
Now we are looking for a process to avoid the clearing but split the amount during the payment run over 2 bankaccounts.
Are there some userexits where we can manipulate the REGUH/REGUP tables to do the manipulations by ourselves or is there a standard SAP approach to accomplish this ?
wkr,
Andy

Hi Andy,
Did you find the solution for the above requirement?
Vendor 1012 has a total amount of 100 euro.
60 % should be paid to account 1 (=60 euro)
40 % should be paid to account 2 (=40 euro).
Even I am trying to find the solution for the same requirement?
Kindly reply/
Regards,
Sravan

During F110 run-How to pick profit centre from the Pur.Invoice line item ?

Could anyone please help me with a solution to this problem.
Purchase invoice line items have got profit centre recorded from Material master.
While doing the auto payment run F110, for foreign currency invoices, the exchange rate diff
is posted to a - realised exch rate diff gl a/c.
But there is no cost object attached.
Business wants the system to pick the profit centre from the purchase invoice line item
and put it in the line item record of the exch rate diff account.
Can I do it using OKB9 ? Could someone please explain how to do it.
Thanks

Hi,
With standard SAP this is not possible.may be you have to develop some custom program.
with my experiance,we always post to defualt cost center.
hope this helps you.
Thanks,
Rau

Payment to be done according to invoice line item

Dear SAP Friends,
I require a small clarification on Payment. Please see the below screnario.
1. I have a invoice for 10000 USD, Which includes 3 lines in the details.
       a. Water Charge - 3000
       b. Electricity Charge - 5000
       c. Rent Charge -        2000.
2. Now i receive a payment of 8000.
    Will it possible to match the invoice line item to receive the payments of 2 individual lines for 5000 and 2000.
    When i checked with our FI consultant , i saw that payment is done with respect to the whole invoice , not the individual detail line.
Can anyone please provide some information on this.
Thanks
Kunaseelan.

Hi
Payment will be done with respect to Invoice only but not based on the Individual Line Items.
you can do by partial or Residual Payments.
Regards
Venkat

F110 Payment Run

I am having a problem with F110 Payment run. It's showing the error as: 'Item cannot be paid due to inconsistent withholding tax'. I have done the payment run for the same vendor, same company code and it worked well. Later, I deleted one of the WH Tax type in Vendor Master. Has anyone come across this or similar issue?. What can I do to solve this?.

hi,
I am not able to see the Deleted WH Tax info. when I run the RFWT0010. I tried to do the payment run after executing RFWT0010, but am not able to resolve the problem. I have run the S_P00_07000134(the 1099 report) a few days back(before posting the new Invoices). Do you think this has anything to do with the existing problem. And I have checked the config. again for the tax type, Tax codes and their assignments to Co.Cd. which everything seems to be correct. I tried to pay using f-53 which is showing the same error.
As Hein said i tried to look in the Invoice doc. for the WHTax info.(I have the setting to do calculate the WHTax amount @ the Payment level). So, its not possible to delete the Tax code and make the settings in VM.
As per suresh, I have checked the validity of the tax code its(1/1/2000-12/31/9999). And the tax type, tax code are assigned in the VMR.
I am not able to resolve this. Has anyone come across the same/similar issue and resolved it?.

Duplicate payments in Payment list of F110 payment run

Hello all,
We had run APP trhu F110 payment run was as expected with amount 100000 EUR but when we checked payment list (EDIT- Payment - Payment list) there are duplicate entries and total is showing as 200000 EUR.
Following are onservations
1) In SAP posting made correctly to all vendors with a total of 100000 EUR. So no double payments posted in vendor account
2) Payment list is showing amounts with a doument numbers. Duplicate payments also having document numbers but which are not exists in SAP
3) Documents posted with doc type ZP in sap is not in serial i.e 1,2,3,4 Its posted like 1,3,5,7... the document no 2,4 can be seen in the payment list
4) Also I checked log for the payment run and I found one warning message as "Check whether a duplicate payment medium has been created"
5) Also status of payment run is "Posting orders: 1,174 generated, 605 completed"
6) I also checked setting in FBZP which is also correct
We need to correct the DME file with correect postings
If anyone has faced issue then please share your inputs
Thanks & regards

Dear Rajan,
the payment document validation works as follows:
If you select this parameter, a form is only printed if the related
payment document has already been posted.
Note that it is not advisable to schedule the payment program and the
data medium programs to run at the same time, if you want the system to
be able to carry out validation of the payment documents - because the
system does not start posting the documents at the same time as the
program runs, and in order to ensure that the payment program generally
finishes its run before all the payment documents have been posted, the
payment medium program (started after the payment program) would display
in the error list any documents that have not (yet) been found.
As a result double payments are not possible as no payment media is
created if the payment document is not posted. The items are still
open and are selected in the next payment run again.
If the payment document validation is not used, the payment media is
created but the open item is not cleared as the payment document is
not posted. In this case you have to clear the open items manually
(if a repeat update is not possible) to avoid double payments.
dear Prashant,
It is normal that if the automatic payment does not pay all the items, You can find them hanging into sm13.
However, in general, when this happens you could try to use the edit >
payments > after termination > draw up again option, if it is
available. If there is an entry in SM13, as in Your case, you should process it.
But sometimes the System does not allow to do it.
Anyway the only problem I can see is the one reported by the note 545340:
When the payment program is terminated, it may be the case that not all
payment documents exist on the updated database while the entries
already exist in the tables REGUH and REGUP. However, this basic
procedure has the advantage that the payment media can already be
created for the purpose of fast forwarding to the bank when for example
the payment documents update is delayed.
For this problem please refer to the Note 545340 point [4]
that answers to it.
Furthermore please be aware that:
as I told You in the beginning, If the payment program does not pay
all the invoices contained into the payment proposal, It will depend on
the fact that during the payment proposal run time and the payment
proposal time, something changed respect one of the selected invoices.
This means that one document number was NOT posted even if It is
contained in the tables REGUH and REGUP.
Please be informed payment data tables REGU* are used by only payment
program and no need to take any corrective action and should not be a
problem with auditors.
So You can pay the invoices manually or by the next automatic payment
run without any problem.
I hope now the System behaviour is more clear.
Mauri

F110 payment run - Plant wise

Dear All,
We have a scenario where clients is having five plants under one legal entity.
Client wants F110 payment run separately for all vendor invoices specific to the plant.
For all plants , there are separate bank accounts and respective invoice must go to plant specific bank account as this is legal requirement of the country.
Could you please let me know configuration steps to manage this scenario.
Also can you let us know, how can we make payment to selected Vendors in F110 ( additional field tab).
In paramater tab,we have the option to incorporate the selected vendor codes.
In additional field tab,we have only 3 row with a range of Vendor codes.
Now i want to make payment to 50 vendors(specific to one plant) the vendor codes are 001,18,58,193,etc......how can we do this while we run the payment program.
Do suggest
Regards

When you are posting an invoice, some field in the invoice document must have plant information. Based on that you can substitute the House Bank. Lets say for example, You enter the value "Plant1" in the Assignment field of the vendor invoice. and you want to pay Plant1 invoices through house Bank HBK01. Then your should create a substitution rule saying if the value in say assignment field is "Plant1" then substitute House Bank field in the vendor line with value HBK01. If you are using a dedicated vendor number ranges specific to plant, then you can do the house bank substitution based on vendor ID as well, and then you don't have to enter Plant info in the invoice.
Then all the invoices will have right house bank data. Now to make sure that you are paying to vendor posting specific to a plant in the payment run. You can go to FREE SELECTION tab of payment run(F110) when you enter parameters, and in the drop down under field name double click others option and select the document and enter. and then select and enter the field that you are using to enter plant information. In my example I have used Assignment field to enter plant information. So, I will select BSEG-ZUONR. Then I will go to Values field and enter "Plant1". Then Payment run will pick up only "Plant1" invoices.
If you already using some rules to enter the house bank in the invoice, then you might not want to use the substitution rule. But find out which field in the vendor invoice has plant infomation, and select that field as i have shown above though FREE SELECTION.
Thanks
ROn

Payment run didnt pick the open items of Vendor(special G/L for downpmnt)

Hi,
Payment run didnt pick the open items of Vendor(special G/L for downpmnt). The line item is due on 2.11.2010.
The payment run was done on 12.11.2010. Why this line was not picked?
Edited by: Rudra Prasanna Mohapatra on Nov 14, 2010 11:11 AM

Hi Rudra,
In order for the special GL's to be selected for Payment run, you need to define them in your configuration.
Go to FBZP, click on All company codes, and double click on your company code, and check whether special GL is entered in vendors>Sp. G/L transactions to be paid.
Regards,
SAPFICO

Vendor account not picked in F110 payment run

Hi Sap Experts,
i have assigned two payment methods to vendor master X,Y,which i do payment run for X for currency USD all the documents are picked for payment and when i run another payment run same time for Y for currency INR its not picking up in payment run even all the open item s are due,
could help me to solve the issue
Laxmi

Hi,
Delete the current proposal of the payment run. Enter parameters once again. In Free selection tab restrict the currency to INR field. Run the proposal once again. If it still does pick up line items, check the following things
1. Parameters of the first payment run. Did you restrict the payment run only for the first payment method
2. Also see the dates entered in parameter tab of both runs
Regards,
radha

Stop price update of delivered but un-invoiced (non-invoiced) line items

Hi Gurus,
I need some help regarding price update of line items which are delivered but not invoiced yet.
Case 1:
I am calling the FM 'BAPI_SALESORDER_CHANGE' and passing the line item (say 10) whose price needs to be updated. This line item is neither delivered nor invoiced. Result, correct change of price for line item 10.
Case 2:
In the above order, i am adding another line item (say 30), which is completely delivered, but I have not yet created an invoice for it. I want that this line item's price should not be changed (as delivery is already created for it). So, in my price update report, I check and filter this line item (10) and pass only line item 30 to the BAPI. Result: not only line item 30 but line item 10 also gets updated with new price!!
Case 3:
I created a new line item(40) and created an invoice for it after completely delivering it. When I call the BAPI now, I again filter the line items 30 and 40 and pass only line item 10 which i want to be updated.
Result:
Line item 10 - updated with new price
Line item 30 - updated with new price
Line item 40 - not updated
Requirement:
Any line item that is completely delivered should not be updated with the new price regardless of it having an invoice or not.
Assumptions:
I am running a custom report to find the line items that need change and calling the BAPI_SALESORDER_CHANGE and passing those line items to update the price.
Problem faced:
This process is updating all line items in the SO that are not invoiced regardless of weather I am passing it to the BAPI or not
As far as i know, the checking of the invoice is in some standard program, and hence had debugged the BAPI and got the FM SD_SALES_DOCUMENT_SAVE which in my opinion is doing the change. But on further debugging I lost track of the tables which were holding the data as the code is flowing through a number of user exits and standard forms.
Please help!

Hi Soumyo,
In Pricing Update screen, you will find pricing type X, Y and Z which you can use to define your own pricing update scenarios. Check OSS note 24832. This note provides enough details about each of the update pricing options and also explains on how to use pricing update X, Y, and Z. Let me know if you need any more help on this.
Thanks & Regards
Kapil Sharma
Author - Configuring SAP ERP Sales and Distribution

System shut down during F110 payment run

During the F110 payment run, the PRD system shut down. There were 259 items in the proposal and according to the status 42 posting orders were generated and completed. What is the process to handle this problem? Can the payment run be re-started?
It appears that clearing documents were created for some open items before the system shut down but no checks are showing in the check register. Has this happened to anyone before and what steps should be taken to resolve this?

Is it a matter of...
1. deleting the output of the payment run,
2. deleting the proposal
3. canceling the the payment check by check using FCH8 if any occurred
4. reseting and reversing the clearing documents created using FBRA before the system shut down
5. start a new payment run

Email notification for payments made through F110 payment run

Hi Gurus,
I have configured all the settings for the email notification through F110 payment run. I got the email also by using the email field in the address tab.
My question is the same field is using the sales team to send their customer statements and invoices. So i selected the Contact person tab and maintained the email address.
But i could not send because the contact person tab is also pointing to the same field for email ( SMTP_ADDR)
Basically i want to send email for my payment run, without interuptting the email id which is maintained for customer statements.
Can you please suggest the alternative field to send email apart from address tab ( email field )
Regards
Krish

Hi Krish,
Please go through posted discussion tread for your needful:
Re: F110 - Automatic email to vendor when payment run is carried out
Regards,
Santoshy

Need to Split Sales Order Line Item in VA01

Hi,
I have a requirement in which i have to split an order line item for KMAT materail number. system popup configurable screen, here all the required characteristic values have to be selected as per the customer requirement.
After entering all the required customer specific characteristic values, system determines batch automatically. If characteristic values of the Batch matches with the characteristic values of configurable screen selected in the sales order
Here also we have to check the sales Order Quantity (VBAP u2013 KWMENG) and order Confirmed quantity (VBEP u2013 BMENG), if the both the quantities are not same, consider order has partially confirmed.
If Order quantity is partially confirmed, check for the batches with the same characteristic values of the quotation configurable screen and if batch found, system has to create a one more line item and new batch has to be assigned to create line item.
Reduce the order quantity equal to the confirmation quantity in the first line item.
Create a new line item in the quotation, copy all the remaining unconfirmed quantity from the first line item and also copy all the characteristics and properties (item category, schedule line category, business data, item data, and requirement type) and assign the batch to the new line item. System does the availability check automatically and confirms.
In another scenario system doesnu2019t find batch, in this case capable to promise has to trigger directly.
Here we have to check the Order confirmed quantity, if confirmed quantity is equal to zero.
Change the item category of the line item, due to which system determines different Requirement type and schedule line category.
Based on the Requirement type system triggers the capable to promise.
I would lke to know which is the suitable user eixt or BADI to split the line items and what all the tables or structures i need to populate in order to create a new line item successfully.
I have seen many post in sdn but no body gives the right user exit name where i can add new line item.
Regards,

Hi Amit,
Thanks for your reply. In this scenario configurable material is involved. And first Make to Stock scenario is executed to check any material with customer entered characteristics are avialable. If its so it will determine its batch and assigned the quantity.
If zero quantity is assigned or no quantity is assigned then I have to trigger the Make to Order scenario for rest of unconfirmed quantities in order.
I have check it in USEREXIT_MOVE_FIELD_TO_VBAP but it was of no use. I even tried in USEREXIT_CHECK_VBAP but still no result. I am not sure what all the tables and structures i need to populate there.
Regards,

Insert/Update/Delete Non-PO Invoice Line Item via FM/BAPI?

Does anyone know of a way to insert/update/delete an Invoice Line item (Non-PO Accounting Invoice - Transaction FB60 or FV60) using a BAPI or Function Module (or set of function modules) using ABAP? I have been trying to find some code to accomplish this and am stuck on a couple of issues.
I have found PRELIMINARY_POSTING_FB01 and PP_CHANGE_DOCUMENT_ENJ but both seem to submit the details to background processes. This is an issue because it gives the user a success message after execution but later delivers the error to Workflow. This is for an interfacing program so the results should be as real time as possible.
Has anyone accomplished this via FM or BAPI and if so would you mind sharing your experiences?
Thank you very much,
Andy

SG- Thank you for the reply.
I have been playing with BAPI_INCOMINGINVOICE_PARK and I'm not sure if it is doing exactly what we want, but it is something that I have considered in the past. I plan on looking into BAPI_ACC_INVOICE_RECEIPT_POST this morning, hopefully that will provide some more for us.
If possible I'd like to avoid BDC sessions because this program could hypothetically interface with multiple SAP systems with different configurations.
I will check into those FM's and thank you very much.

F110 payment run - split on invoice line item that exceed certain amount

Similar Messages

Maybe you are looking for