F110 use of program.

Hi SAP Experts,
During F110 in printout/data medium TAB, there is a colum for Pragram EG: RFFOAVIS_FPAYM etc.....i am confused to use which one & when.
What is the use of this program and in the bottom line List is also there where also there are programs. When to use this programs.
Thanks in advance for your reply.
Regards.

Hi Borde,
Whatever you are seeing print program in Print tab in F110 is from FBZP settings (country level). So you need to attach form to your respective print programs to print payment media. And below program list is for to process custom programs simultaniously. There we need to give custom programs and its form name, For eg Payment interface (customers Interface)
Regards
Vishnu

Similar Messages

F110 AUTOMATIC PAYMENT PROGRAM NOT PICKING PAYMENT METHOD

hi guru's
F110 - Running payment program proposal list going to exeption list , House bank not picking up from VENDOR master. if not maintaing house bank in vendor master
proposal list is coming but 2nd house bank picking but i need 1 house bank. i maintained ranking order in FBZP.
pls suggest me this issue.
raj.

Hi,
I had an other problem with payment methods and in that case it was important how you fill it in the vendor and in the payment run. prhaps this helps you to found a solution or to understand how it is working
I have set-up a new payment method "E" for splitting euro payments under EUR 50,000 (K is for the other and non iban payments)
For this I have made the following settings in the Bank determination:
PM Rank order House bank
E 1 733BE
K 2 733BE
In the vendor masterdata I will fill in EK (to make it easy for users)
When I run the payment method with KE the system is using K and not E. when I fill in EK the IBAN payments are going with E and and the other one's with K what is correct.
Why is the Rank order not working for this? (look first to E and when E is not permitted go use K)
Paul

F110-Automatic payment program payment made in other countries

I have 50 Company codes(Different countries) and one paying company code(US). Now i want to set up FBZP config. .. what should i do to enable the inter-country/inter-company payments using F110(Automatic Payment Program).

Hi Ashish,
In step 1 of FBZP, i.e. "All company code", when i try to enter a "New Entry", and when i try to set paying company code(which is in US) for other company codes that are outside US, i get the following error.
"Company code <paying company code> is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.
Please advice

I have been using Adobe Photoshop Elements 11 for two years. I got a new printer and installed it although I did not remove my old printer from my computer. I used this program and my new printer for quite a few months, but today I deleted my old printer

I have been using Adobe Photoshop Elements 11 for along time now. When I first used the program I had a different printer than I have now. Although I changed printers I never removed the software from my old one. Now this was never a problem until today. When I choose a printer I still had option to use the old one but always chose my new HP Envy 5530 and Adobe never had a problem printing from that new printer. However today I decided to remove my old printer from my computer and now my Adobe cannot find my new printer. How can I make it find the HP printer?

Try this --
Go to the bottom of the link I gave you, and you will see
click that link and then click the chat button to talk to an Adobe agent

I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

The license did not have use restrictions Licenses and terms of use | Adobe
BUT... when your one year Education account ends, I do not think you will be able to renew at the Education rate

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to reprogram a different key to be my plus/equals key? Can I program a function key? key

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this function?

Water + electronics do not mix. Something was damaged insode, and the logic board may be corroding as is.
Take it to a Genius Bar for an evaluation and repair estimate.
This is accidental damage and not covered by warranty.

Printing Line Items in Script without using driver program

How to print the line items of a internal table in sap script without using driver program? I am not supposed to edit anything in the driver program. Pls help me to solve this problem...

Hi,
You can try by creating a new driver program and a new FORM ENDFORM inside that for this purpose.
Regards,
Gaurav

Calculate Withholding taxes for VEndor Invoices using ABAP program.

Hi All,
I have to upload Vendor Invoices using FB60/Fb01 tcodes. I am able to post the Invoices using FB01/Fb60
but I have to calculate extended withholding taxes also using this program for the Invoices.
Is it possible to upload vendor Invoices and calculate withholding taxes using Program?
If yes,
Does anyone has any idea how do you calculate extended withholding taxes using any BAPI's?
I have used these two BAPI's
BAPI_ACC_DOCUMENT_POST
BAPI_acc_invoice_receipt_post
they are working fine but without withholding tax.
This is a requirement for country India.
Regards,
Sushil

Hi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
     extract the vendor types in to itab Table1New.
     Select the vendor & types from Table2 by using the for all entries option (better performance).
     loop at Table1New
          check in Table2:
               if the unique key is vendor no: check all fields for the vendor type from Table1New
               if the unique key combo is vendor no & type: check by using a read table.
          If not found => add entry to Table2
     endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou

Need help in using [RUN PROGRAM] Activity against a server in another domain

Hi Experts,
We have two domains with two way trust enabled. Orch server exists in DomainA and target server exists in DomainB.
We are trying to execute some scripts(g:IPCONFIG) from orch server to target server using RUN PROGRAM activity. This is running fine and give expected results, if I give Built-in Administrator credentials in Security Tab. But I'm getting some
strange values like chinese/japanese language strings, If I use a DomainB/DomainA user (Part of local admin of the target server) in security tab as well as Advanced tab-->Runas.
Things I tried:
- DomainA/DomainB user in Security Tab as well as RunAs tab  ---> Strange Strings
- DomainA/DomainB user in Security Tab and BuiltIn Administrator in RunAs tab  ---> Strange Strings
- BuiltIn Administrator in Security Tab ---> Expected result
- BuiltIn Administrator in Security Tab and DomainA/DomainB user in RunAs tab  --> ProgramExitCode = -10xxxxxx
But our requirement is to run the script on the target server as Domain User(Part of local admin).
Thanks in Advance
Thanks and Regards, Narayana Babu

Hi Experts,
We have two domains with two way trust enabled. Orch server exists in DomainA and target server exists in DomainB.
We are trying to execute some scripts(g:IPCONFIG) from orch server to target server using RUN PROGRAM activity. This is running fine and give expected results, if I give Built-in Administrator credentials in Security Tab. But I'm getting some
strange values like chinese/japanese language strings, If I use a DomainB/DomainA user (Part of local admin of the target server) in security tab as well as Advanced tab-->Runas.
Things I tried:
- DomainA/DomainB user in Security Tab as well as RunAs tab  ---> Strange Strings
- DomainA/DomainB user in Security Tab and BuiltIn Administrator in RunAs tab  ---> Strange Strings
- BuiltIn Administrator in Security Tab ---> Expected result
- BuiltIn Administrator in Security Tab and DomainA/DomainB user in RunAs tab  --> ProgramExitCode = -10xxxxxx
But our requirement is to run the script on the target server as Domain User(Part of local admin).
Thanks in Advance
Thanks and Regards, Narayana Babu

Error in( F110) Automatic payment Program

Hi,
while posting the payment through (F110) Automatic payment program , i have got the Error that
" Error in creating the payment document; read job log"
please help me out
Thank you

Hi,
could you please check carefully the exception list and the payment/proposal log in F110, in which you can find the reason why it included in the "exception list".
Did you activate the Additional Log? what does the log say?
You should analyze the proposal log in detail in this case. Also could you please ensure that this vendor is not blocked for payment and you have not entered the Payment block in the affected documents.
regards Bernhard

Firefox crashes when I try to use DataLoad, and I was able to use this program a month ago.

In the recent past I have been able to use a program called DATALOAD (shareware) to load data into Firefox web forms (specifically web based sales tax returns).
However, now every time I try it now Firefox crashes, so I am forced to use IE (which I hate). The last time I used Dataload was in April 2011 (for my quarterly tax returns).
On of the latest updates to Firefox must have a conflict with this program.
Can you please research to see what changed in Firefox to make it crash when using Dataload? I do not want to use IE if I do not have to.

Hmmm, That is very odd. What is the link you are using? Are you logged
in to YouTube?
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Using SUBMIT program command in Background

Hi,
I am submitting the program in Background using Submit<program> command.
Job is getting released but not fininishing(not executing the program) in ECC6.0.
Same program is working in fine in 4.5b.
Please let me know if any one faces this situation. Its very urgent.
Expecting the reply from you soon..
Thanks
Regards,
Raj A

Hi,
perhaps you or your admin have configured to less batch-workprocess or they are all configured only for A-class jobs.
Try to start the job as A-Class job. If the program is executed, then ask your administrator to configure more batch workprocess that are not reserved for A-class jobs.
Regards,
Stefan

Exporting and importing table using R3trans program between 2 clients

Hi,
How to export and import a table between to clients in a same system using R3trans program?
I need to copy a table from Client 020 in a system to client 040 of the same system using R3 trans. I need to know the procedure.
Can any one advice
Regards,
Suresh

This is how you do a export and import of table entries.
Export:
Open Notepad and type the following,
export
client = 020
file = 'clone.export.<sid>.<client no>.data'
select * from <client_dependent_tablename1>
select * from <client_dependent_tablename2>
select * from <client_dependent_tablenamen>
Save the file as export.ctl
Run R3trans export.ctl
and the data of these files will be stored in a file called clone.export.<sid>.data in the directory from which you have called R3trans
Import:
Open Notepad,
import
client = 040
file = clone.export.<sid>.<client no>.data
buffersync = yes
Save the file as import.ctl
Run R3trans import.ctl
Cheers!
Bidwan
Message was edited by:
Bidwan Baruah

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

Can you use the programs in the creative cloud on multiple computers?

Hey,
I was wondering if it is possible to use the programs on multiple computers when you have the membership?
Thanks

From the doc : http://www.adobe.com/products/creativecloud/faq.html
"You can install the desktop applications available in Creative Cloud on your primary computer and one backup computer, as long as they are not running at the same time. You will have access to both the Mac OS and Windows versions, so if you have a Mac at home and a PC at work, for instance, you can install your applications on both. See the product license agreements page for more information."

F110 use of program.

Similar Messages

Maybe you are looking for