F150: dunning a customer

Hi All,
I'd like to know if, dunning a customer (t.code F150), SAP locks the creation of new sales orders (t.code VA01) for that customer (SD).
Thanks
Edited by: Umberto Gandalf on Sep 18, 2008 2:16 PM

Hi
During the Dunning run the line items need to be updated with the dunning level. Also there is an updation in the master data. I think they are different functionalities and table locks should not be there. However, the only situation where I foresee there could be a block is when there is Credit Management active. Not sure about that.
The only time when locking happens is when the processes are affecting the same tables. So, During a dunning run the custmer should not be locked for sales order processing.
(I assume I have understood your query correctly)
Karthik
Edited by: Karthik Coneru on Sep 18, 2008 7:49 PM

Similar Messages

  • F150 Dunning printout - Termination Error

    Dear Experts
    At T.Code F150 Dunning proposal run, if we execute "Dunning Proposal" and if we want to delete it then system permits us to delete the Dunning Proposal.
    However, in some cases,  system shows everything correct at Dunning Proposal but when we execute "Dunning Print out" system give error message like "Dunning Printout as terminated".  In this case, we figure out the problem and re-run dunning printout to solve the problem.
    However, I would like to know,  Is there any possibility that we can delete "Dunning run" completely when dunning printout is ended up at "Termination" error?
    Thanks in advance for the help.
    best reg
    S. Habib Pasha.

    Dear friend
    Agreed.  However, live situation is User has performed Dunning run for all customer by mistake, where is not suppose to.  and this dunning run is ended up with "Duning printout terminated" error. 
    If we fix the termination reason and complete the dunning then all outputs will go to customers automatically by e-mails from SAP.  and we want to stop this.
    hope I am clear and the requirment we are looking at...
    best reg
    S. Habib Pasha.

  • How to use Adobe forms with F150 Dunning Run

    Hi,
    I want to use Adobe forms with the transaction F150 Dunning Run.
    How do I get the adobe form in customizing? I have put the FM 'FI_PRINT_DUNNING_NOTICE_PDF' in business transaction Event, BF31 - P/S modules of SAP app - 00001720, Fi-FI. But it is still not recognizing the ADOBE form.
    Any help is greatly appreciated.

    Hi,
    I am also working for calling custom adobe form instead of sapscript.
    While configuring BTE 1720, i noticed that configuring BTE only FI-FI application does not solve the purpose. You need to assign function module FI_PRINT_DUNNING_NOTICE_PDF for all Application Area Indicator.
    Adding to IS-PS will allow to print for customer.
    This solved my problem. But this setting is global so you need to take care of it.

  • F150 Dunning - Item not Dunned but Writes to MHND

    I am running F150 Dunning and the program is writing Invoices that have NOT been Dunned or OVERDUE to the table MHND. 
    Print all Items is NOT Checked for the Dunning Level and therefore does NOT show up on the Dunning List however it does appear on the Table MHND.
    Why is the transactionI F150 writing Invoices  NOT due to MHND.  Finally -  Note the Dunning Item is blank in the table as the item is NOT within the Arrears specified in Config.
    I am thinking it simply should NOT even exists on MHND after F150 execution.

    hi,
    please check your dunning notice settings.

  • F150-dunning -----Customer account was blocked by dunning run

    Hi
    gurus
    Cusomer account was blocked by dunning run, where i can unblock please reply as early as possible. while doing individual notice it showing the below error msg.
    Error msg: Account D 000006000001 was blocked by dunning run 20006722 DUN1
    it showing above error, where i can unblock.
    Thank you
    Anil

    hi Anil,
    If the invoices are bloced for the particualar invoices then go to Tcode MRBR and enter the invoices number and release it and then Run the Dunning.....
    Assign the points....
    Ranjit

  • How not to print all the pages of a smartform? (for tr F150 - Dunning)

    Hi Forum
    We have the follow situation:
      For DUNNING (transaction F150) the user want stamp 3 diferents SMARTFORM.
       For the first time the transaction is executed is required only a list of documents, for the second time (via sample printout, indiv dunn notice or dunn history)  once the legal data of the customer is updated, the user wants the list of documents, a letter for the lawyers and a letter for the client, in the follows executions  (3 and up) the user can require only the list of documents or all smartforms (list and letters)
      Via customizing we can control the normal dunning and the legal dunnig, but once the client is in legal status the transaction create only the legal smarforms.
    We found  an user exit associated  EXIT_SAPF150D_001. in the F150 transaction, but is not complete, in sense that are failed some parameters .
      Another option is create an unique smartform with 3 pages where we can control the case for the print, but here is where we ask: How we can do to print a specific page of the smartform without print all of them (how can we print the 2nd and 3rd page without print the firs one) ??
    To control the 3rd execution, we can create a dictionary table with a flag .
    Thank you for your help

    You could create a report containing all the single reports in one using UNION. This report could be placed on a "hidden" page. The link for downloading that report you can place on your page. That should work.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.apress.com/9781430235125
    https://apex.oracle.com/pls/apex/f?p=31517:1
    http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494

  • Prob in getting Mail body for the standard tcode F150(Dunning).

    Hello all,
    I am using F150 for the dunning notice print out.After seeing the display of the dunning notice once we come back it populates a popup window where it asks to send the mail to the particular mailid or not. I have used the BTE ---  SAMPLE_PROCEE_00001040 and copied it as z function module and customised according to my requirement in order to get the mail id of the customer in the pop up.My mail is going to the customers mail id properly only but my prob is that we are not able to get any mail body for that particular mail.Where can we add the mail body text to that mail in the standard tcode f150.can any one suggest is it possible or not.
    Regards,
    Pavani.
    Edited by: Pavani Rayappureddi on Aug 11, 2009 11:21 AM

    solved my self.
    added         C_ITCPO-TDTITLE  = 'Pending Receivables Statement-XXX GROUP'.
    in the bte code.

  • F150 dunning - bapi

    Hi,
    can anyone tell me after i have run the F150 transaction where is stored data from that report (tables)?
    And there are some bapi to check current dunning level and which billings are overdue for a specific customer based on F150 data?
    Many thanx... any help would be apreciated.

    pls. check tables MHND and MHNK for dunning data. I am not aware about any BAPI, but the dunning level is written into the customer master (table KNB5) data and into the line item (table BSID)

  • F150 dunning block

    hi,
    may i know if dunning run F150 can result in dunning block?
    if the maximum dunning already executed yet payment still not done, may i know where is the configuration that can make it blocked.
    i tried ova8 but still not able to block.
    need advice.
    thanks

    Hi
    Go to FBL5N and give the customer number and execute. and select the invoice/document which has be blocked.
    You can block the customer in Additional data tab of a line item for a particular customer invoice.
    You can find Dunning Block item with drop down items in the box, it is the place where we can block the customer invoice my marking respective item as per the business provided their reasons.
    Thanks and Regards
    Sri

  • Emailing SAP Transaction F150 Dunning Notices

    I wish to email SAP transaction F150 A/R dunning notices to customers who perfer receiving them in this manner. An email attachment preferably. Anyone have information they might share as to how this might be accomplished? Thank you for the help, harold

    Hi Dubey,
    You can check the following customizing settings :
    Define Dunning Forms (with SAP Forms)
    We Require some standard u201CSPROu201D settings  :
    The standard settings allow us to create dunning notices using SAP Smart Forms, we must first define the corresponding function module in u201CSPROu201D.
    1. Financial Accounting (New) Financial Accounting Global Settings ( New )  -->Business Transaction Events.
    The SAP Business Framework screen appears.
    2. Choose Settings -> P/S function modules -> ... of an SAP appl. .
        Continue..
    3. Under the Business Transaction Event (BTE) "1720" with application indicator FI-FI, change the function module name and save your entries.
    Standard settings in u201CSPROu201D
    Financial Accounting (New)--> Accounts Receivable and Accounts Payable -->Business Transactions --> Dunning --> Printout ->Assign dunning forms.
    Select u2018Dunning Procedureu2019 and choose u2018Forms for normal dunning procedureu2019
    Choose u2018Company Codeu2019
    Change the name of your dunning form
    I thought, it will work for your requirement.
    Thanks
    Raghava Vakada

  • Re:F150(Dunning Run)

    Hi SAP Experts,
    I have a problem while running f150, i done the basic settings, dunning procedure, sales in voice raised in
    f-22,before run f150.
    In dunning third level i got a table error (t056z) interest indicator 01, currency INR  is missing in table t056z.
    CO.code currency is USD&Customer currency is INR, in f-22 i gave the currency is INR,
    I assign the interest indicator in xd01.
    Please go through this give me a solution.
    Thanks in advance,
    Laxmi

    Hi,
    table error (t056z) interest indicator 01 means that you are not maitained Interest Rates for  for interest indicator 01. go to Tcode:OB42 and make your entry.
    Hope this will help you.

  • TRX F150 -Dunning

    Dear colleagues,
    Further to the lauch of trx F150 for dunning I get a spool and I could print it but I need to turn it into a pdf and send it to an e-mail customer's address.
    In case I have a spool that has several reminders for payment relating to different customers, there is a problem! That, because of the fact I can't share a document for 2 or more receivables and I can't send it to each customer by mail.
    How can I solve this problem?
    Thanks in advance.
    Luca Stella

    Dear friend
    Agreed.  However, live situation is User has performed Dunning run for all customer by mistake, where is not suppose to.  and this dunning run is ended up with "Duning printout terminated" error. 
    If we fix the termination reason and complete the dunning then all outputs will go to customers automatically by e-mails from SAP.  and we want to stop this.
    hope I am clear and the requirment we are looking at...
    best reg
    S. Habib Pasha.

  • F150 - Dunning UNACTIVE ,DON'T DUNNING .

    Hi All,
    Our use Transaction code F150 to run the dunning lettle,but not run,and not data to be select .
    problem:
    How can i to setting DUNNING ?
    Which field need to check ?
    Thanks,
    Alex

    Hi,
    Whenever the customer has the due items,this dunning will be done to serve the remainder letters regarding the receipts ,based on the payment terms we define in the customer master.
    For this,the basic settings for Dunning like,
    1)Define Dunning areas
    2)Define dunning keys
    3)Define dunning block reasons
    4)Define dunning procedure
    5)Define dunning forms
    6)Assign dunning forms
    Once the above config is done,then run the Dunning for the customers who have the due items.
    This transaction will send the customers the remainder letters based on the payment terms mentioned in their masters.
    Hope this is useful.

  • Report F150 Dunning

    Experts i am looking for a report which shows how many dunning letters and levels a customer has received over a period of time.
    Is there any T-code or SAP tables which i can use for my reporting?
    thank you!!

    Hi Hemanth,
    Customizing:
    You can go the Transaction FBMP and add your Form name as well as the Print Program name.
    These would be call when ever you run the dunning Program.
    From the Layoutset yuo can use the  PERFORM subroutine using and changing parameters which would have the Structure ITCSY.
    The Form then needs to be present in the Driover Prpgram.
    Please let me know if this is useful.
    Regards,
    Deepak

  • F150 Dunning selection executed, job deleted

    Hi ,
    Pl let me know that from tcode F150 i am getting error like "Dunning selection executed, job deleted".
    after defining Parameter & scheduling the job, it is deleting. Whereas It should come "selection scheduled for 28.08.05   at 00:00:00".
    Thanks,
    Chandra Prakash

    Did you try to debug it? Put a break-point inside the 'JOB PREAPARATION' routine in the include LF150F01 and check whether the Job is created?
    good luck,
    Suresh Datti

Maybe you are looking for