F2418 prining and scanning issue

I have an HP F2418 all in one printer.
While printing a file the printer stopped mid way.
I had to turn off the printer and restart it. But now when I try to print or scan then all the lights start blinking and I am getting the error message that the printer is offline.
I removed both cartridges and restarted the printer but again all 3 lights start blinking whenever I try to print or scan anything.
What should I do ?

Hi SSD1,
Welcome to the HP Forums.
I see that you are having an issue with the printer reading that it is OffLine.
I do have a few suggestions that we can try in the attempt to resolve this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once the printer is connected to the wall outlet, please use the ON/OFF button to do a proper power cycle. This will do a Semi Power reset on the printer.
I have also located a document that deals with the 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Windows 7.
Be sure to give the "Kudos Thumbs up" a click as well as the "Accept as Solution" option on the bottom of my post to show others how to find the answer to the same issue that we have been dealing with. Team Play is the best way!!!
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Paper Jam and Scanning issues for the HP Officejet 6600

Had to warranty my printer for same issue and refurbished one is worse.

Hi @Uguessedit,
Welcome to the HP Forums!
I am sorry to hear that your HP Officejet 6600 refurbished printer is worse than your previous printer, but I am happy to help!
For further assistance, I will need some additional information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies. Copying a Multipage Original in Order (Collating).
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
What type of scanning issues are you having? Are you getting any errors?
In the meantime, please see this guide, A 'Paper Jam' Error Displays on the HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Pri....
Thank you for posting, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Utility and Scanning issues with Officejet Pro 6830

I purchased a 6830 several weeks ago and have been using it for general wireless printing from my Mac for serveral weeks with no problems. Today I wanted to try scanning, and for the first time brought up the "HP Utility" and noticed that it connects to the printer, but lists the supplies as "Cartidge is missing" for all the cartridges. However, when I go to the front panel of printer and select the "ink" icon, it show that I have all cartridges installed with almost full ink. I perform a "test print" from the printer queue and it prints it fine.
I removed the driver and reinstalled, and got the same results (evern with multiple reboots, and printer power resets)
In addition, when I try to do a ether a scan to computer from the printer, or from the HP Scan utility I get a failure. From the scan utility. Using scan to computer, I select my Mac and the process starts (and a little window pops up on my Mac for a few seconds), but eventually the printer gives a message that it lost contact with the computer.
Yes the "Enable Scan to Computer" box is checked, and there is a green "Scan to Computer Enabled" indicator in the HP Utility window.
I've followed various appropriate trouble shooting guides but nothing appears to work.
Also checked if the Printer Firmware was up to date and it was.
When I connect using the Webinterface to the printer, the productinformation->printer information page show that the cartidges are installed, and "ink guage" has appropriate levels.
Also, webscan does not appear to work, although it pops up an empty pdf page, and I can hear the printer doing something (although not feeding the pages)
HP Utility: 5.22.0
HP Inkjet 4 Driver 4.2.0
OS X : 10.10.1

Hi,
First of all open System Preferences and select Sharing.
Ensure the computer name doe snot include any Non-English or special characters, click on Edit and change it if necesary.
Next clcik the Apple icon and then About This Mac.
Clcik on Software Update and then clcik the top Store Menu.
Select Reload This Page and install any listed HP or Apple Updte if a such exists.
If thwe same persists a such may also happen due to network issues...
What exact error appears while launching a scan from the HP Scan application or from Image Capture?
A such may allow to better understand any possible cause.
As well try enabling wireless direct on your printer and connect the Mac to the printer:
Click the Wireless Direct icon () and turn it on, take a note of its passcode.
From your Mac click the WiFi icon and select the printer's network
Note: if a such is not listed click on Join Other Network and then Show Networks, then it should be listed.
Allow it a moment to connect and try scanning from your Mac, as well try checking the ink levels now.
If those are working as expected, the issue may rely on your home network.
Please clarify your router brand and model, I will do my best to guide you further.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Fax and Scan Issues

Have a new 7520 All-in-one. Tried to fax to 2 numbers. Operation seemed normal but after many rings I got a "No Answer" message and printout. Both numbers swear their faxes are on.
I then tried to set up a .pdf. I scanned the document and selected "email." I got the email from HP's eprint center referencing the "attached document" but there was no attachment.
Now I wonder if there's something wrong with my printer. Help

UUse the Settings app.
SEttings > Mail, Comtwct, Calendars > New Account > tap on the type of the email account you have or select other if the choices don't apply > enter the requested information that you received from your email provider.

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Scan app not opening and other issues

Hi,
Let me start by saying thank you for your assistance. I have a regular-old 5514 photosmart airprint printer, and it is going crazy. It is just about to be two years old. My computer is a MacBook Pro on 10.9.1 (also two years old). The printer and computer are connected by my Comcast blast wifi. All of my paper and ink are HP. So here's the problem, first it won't print my pictures, not on glossy or regular-it just makes the noise like it is printing but the pages are blank (this never used to be a issue); second, the scan app won't even open on my computer, it just gives me a long page of coded errors or just automatically closes; finally, it often is printing streaky if it does print. There are no updates that I can find on for the app on my computer, and I have zone 2 ink, (I will buy more if this thing starts working), and I have run all the tests and they are completely fine as if nothing is wrong. Please help! If you need additional details I can provide that info.
Thanks,
amycdero

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

A "HP Twain Scan" function in the "Print and Scan Doctor" app - Solution?

Frustration!! Why can't I get the scanning portion of subject printer to work on my laptop Windows 7 (64-bit)!?? I've tried the Print and Scan Doctor several times, and the same dysfunction says "HP Twain Scan" whatever that means or is? I've pulled out the cords, all of 'em, and it still not helping. Did I purchase a printer that is not compatible with my laptop? As far as the scanning portion is concerned, or what? I can print OK, both from website/emails and my own documents. I do a lot of scanning (photos mostly), and so this will be a sad problem.Hoping someone out there in techland can give me a solution. Thanks!

Hi , Welcome to the HP Forums! I understand that you cannot scan with your HP Envy 7645 on Windows 7. I am happy to look into this scanning issue for you! Some questions for you: Are you able to make copies with the printer? Copying Documents or Photos with an HP ENVY 5640, 5660, 7640 e-All-in-One, HP Officejet 5740 and 8040 e-All-in-One Printer Series.How is the printer connected? Wireless, Ethernet, or USB? In the meantime, please try the steps within this scanning guide, A 'No Computer Found', 'Connection Required', or 'Scan Unsuccessful' Message Displays for HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e-All-in-One Printer Series, and let me know what happens! Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Battery, heat, and ringer issues

I recently purchased the Iphone 4s.. this is my first iphone
I did the update that Apple sent out to help the battery and it seems like it worse then before the update?? My phone has been off the charger for 45 minutes, I sent 1 text message, and had 1 phone call. The percentage is now at 87. It the last 2 minutes i have watched it go down 2%? Is this normal? Also, the phone gets REALLY hot...
If not, what do I do now??
Also, I keep missing phone calls because I don't hear the phone ring... but the ringer is all the way up..
Any help will be greatly appreciated!!

mdorling wrote:
We've got the same issues, the BBM contacts went, now the BB won't charge ... we've tried all ways to get it to charge ... typically it's just over a month old so we can't get a full refund ... we are on here trying to find out what we need to do as we can't obtain a telephone number for BB customer services nor an email address only a tweet address which I haven't downloaded onto my handset. So am stuck!!! Any and all advice very gratefully received as seriously peeved with BB models now. My first BB was fantastic ... but all newer models have had problems ... think BB needs to ensure that all techy problems are fully ironed out prior to launching their new BB handset!
1. Connect your Z10 to the wall outlet charger for an hour and then with the Z10 powered on, and with it STILL CONNECTED, remove the battery for a minute and replace. This will normally reset the the on-device battery meter and allow the charging status and percentage to show more correctly.
2. Orange is your tech support contact and any issue which they cannot resolve, they should escalate up to BlackBerry tier two tech support, or you should ask/demand that.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IQ826t Restart and Heating Issue

One thing I definitely do not like the HP's support especially when they will not allow us to buy a 7 Upgrade from Vista nor will they support something (even when I find their glitches and they admit after telling me it was just the OS).. On Repair work, I had to ship it out and this will be my 2-3 time to do repair on this PC in the past 3 years (and I have to wait a week for the repair to be done...)
Besides that, IQ826t, Win 7 Ultimate SP1
All Drivers are up to date with HP website (utilizing Win 7 64 bit drivers and Firmware is up to date). AVG update/scan (no issue - confirmed even rootkit).. Malwarebyte - Scan and no issue
Disk Cleanup, Disk Defragmentation done on a monthly and quarterly schedule
Biggest Issue:
I am getting a crash with Win 7 0x124 Stop Error Message (happens periodically and even after a reboot)
Never had this issue until May and the upgrade to Win 7 was done last year with SP1 update done on March (so it is not an issue with the OS as HP support personnel seems to think... I proved them the issue with Windows Update History, The Bluescreen error code on my error code reader).. This machine under warranty and I had issues with it constant (even in Vista)
They state that it is the OS.. Again, if that was the case, I would think it would happen right away like my Toshiba on SP1 upgrade... That was not the case in the matter. I have a firmware reset (default settings) and the issue persist..
The Error Code relates always HAL.dll or ntoskrnl.exe
One if hardware compatiblity and the other is an OS kernel exe file.. And this usually checking knowledge base relates to hardware failing due to 1) Compatibility (which HP website confirms is not the case) 2) OS corruption (which is not the case checking on safe mode and this happening STILL 3) Heat Issue (which I believe is the issue and was been documented on the Internet
What I am noticing is the unit is extremely HOT (vent is almost burning when it has been off and just turned on).. I wonder if the hardware pieces are literally melting to destruction since I can't just open it up (they state it will void my warranty)
The Symptoms before the Crash (happens any time.. Even right after a power up)
If you are playing audio or video, you will start to hear jitters and sound seems to echo itself .. Video would start to lag and become choppy.. Systems start to slow down and things seem to run very slow.. I have seen the power light on the PC start on but the touchscreen just go black (will not restart sometimes)..
Minor Issues (but could be related)
1) When running PC Hardware Diagnostic, they will come up with an error code in the past and that was warranted for a motherboard replacement (of course, they ship the box to the wrong location and I was in the middle of my wedding so I get to it now).. It was pertaining to PCI Express Status ICH9 PCI Express Root Port where it will generate an error code... Now, running the diagnostic... I will not get any error but PCI Express Root Port 3 & 5 do not show up on the diagnostic... Wouldn't that obvious show something that is a problem when there are 6 ports (which on the previous diagnostic that I can't grab past logs shows that). That is not warranted for a warranty work? Just a note, I got the fail test code (which was intermittent but keep happening and the tech support would not look at previous case.. Port 4 failed and a fatal device code)
2) Blu-Ray player will not run and their answer is that it is your Blu-Ray until they realize that I ran it on 3 different Blu-Ray player standalone, different Blu-Ray, and confirm DVD will work.. They still think it is a software issue until they can't deny my point when it will not read the Blu-Ray no matter what (they took control and confirmed it).. They believe the HP SmartDVD software was failing because of Win 7 and not Vista (even when I downgrade and confirm it works, I stated the software is the issue... Lone and behold, 2 months later they had an update that they refuse to admit I was RIGHT on the matter and done 15 hours of troubleshooting that they were wrong about)
3) Wireless Keyboard and Mouse lost connectivity even if the battery is not low... Just stop typing or omit letters.. This is considering the keyboard is literally in front of the touchscreen
4) Touchscreen is sensitive when it wants to be but won't in other... Constant issues there
This is why I have so much issue with support.. They seem to show that they will do anything to deny the issue.. Heck, I am a computer technian calling on the issue.. It ain't like I didn't troubleshoot on the matter... But they think we are all morons and when I prove them wrong, they will use any excuse to honor warranty... That is why it is amazing..

Look in your Settings > App Manager.
Tap Device Monitor.
Tap the Battery tab.
At the upper right, tap "Since Last Charge" to change to "Last 48 Hours".
What apps or processes are consuming the most battery power?
ALSO, in setting up your new Z30, are you syncing many contacts or calendar data from a connected email account?
Social accounts such as Facebook or Twitter?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Scanning Issue

I am using a hp laptop with Windows 8.1 to print and scan wirelessly to a hp LaserJet Pro 200 color MFP M276nw. I can print wirelessly from my laptop, but can no longer scan to the MFP. I receive a message that says :"Cannot communitcate with device". I've tried using the hp scan app, Picassa, and Paint - same result. I've tried to resolve this issue but can't find a solution that helps. I've downloaded updates for the "Print and Scan Doc", but still can't find a fix. I can't understand why I can use Picassa and Paint to communicat a print job but not a scan job within the same machine. Any ideas?

Hi @MaryKaren ,
I see that you are experiencing issues scanning from Windows 8.1. I would like to help.
Access the device manager window, to see if the scanner driver is listed under Imaging Devices.
How do I get into Windows Device Manager?
Click on View across the top and select show hidden devices.
Open imaging devices, it should list the printer name there. If the printer is listed as pnp, right click and update the scanner driver. Let me know how the printer was listed.
Check the Windows Image Acquisition (WIA) services:
In desktop mode, press the Windows key and R at the same time, to show the run command line.
Type services.msc and then click OK..
In the Services window, right-click Windows Image Acquisition (WIA) service, and then click Properties.
Click the Dependencies tab.
Make sure that Remote Procedure Call (RPC) and Shell Hardware Detection are listed, and then close the Properties window.
In the main Services window, make sure that Remote Procedure Call (RPC) and Shell Hardware Detection show as Started in the Status column. If they do not, continue to the next step to start the service.
In the Services window, right-click Windows Image Acquisition.
If the option to start the service is available, click Start.
If the option to stop the service is available, click Stop. When the service stops, right-click Windows Image Acquisition (WIA) again, and then start the service.
Close the Services window.
That information was provided by this URL.
Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Disregard the title. Go to Solution three: Check the Windows Image Acquisition (WIA) services.
Temporarily turn off any Antivirus Software, just to make sure it isn't interfering.
Try scanning again from the HP Scan Software.
If you are still having issues then check that the scanning ports on the router to make sure that they are open.
A router update may have blocked the scanning port.
You can contact the router company to check and open these ports 9220/9500/427 on the router.
Can you scan by a USB connection?
What were the results when you ran the Print and Scan Doctor previously? (did it print or scan, any error messages)
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP laserjet m1536dnf mfp print and scan is very slow

Hi Sir/Madam,
HP laserjet m1536dnf mfp print and scan is printing and scanning slow on network. Sometimes scan is not work. That's why I have to reinstall the printer driver. So how to increase print speed?
Thanks in advance,

Hi riz1_4444,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer is printing and scanning slow on the network.
I will be happy to help you.
Make sure printer is connected directly to a wall outlet.
Try printing a hardware test on the printer to see if it prints slow or not.
Printing a Configuration Report. Select Method one: Print a Configuration Report from the printer control panel.
I would restart the router to see if this will resolve the issue.
Try another Ethernet cable.
If you are still having issue then test the printer by connecting the printer to the computer by a USB cable to see if it is something on the network that is causing it to slow down.
Hope this resolves your issue for printing slow over the network.
Thank you for posting on the HP Forums.
Have a wonderful day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro M1536 just copy and scan lines

HP LaserJet Pro M1536 just copy and scan lines
Hi, I have a problem with the multifunction suddenly.
When I make a photocopy or when I scan to PC, both the ADF glass, leaving only the lines without any image of the sheet that I'm scanning. If mold from windows instead working normally.
What might be?
Greetings.
Raffaele
HP LaserJet Pro M1536 copia e scansiona solo righe
Salve, ho un problema all'improvviso con la multifunzione.
Quando faccio una fotocopia oppure quando scansiono verso il pc, sia dal vetro che dall'adf, escono solo delle righe senza alcuna immagine del foglio che sto scansionando. Se stampo da windows invece funziona normalmente.
Da cosa può dipendere ?
Saluti.
Raffaele

Hi Opp1,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to reinstall the printer software.
I will be happy to help you.
The print spooler is part of the Windows operating system and if it doesn't stay running the printer software won't install or print.
You could try the following steps to see if this will resolve the issue.
Normally with spooler problems the first thing to do is to clear the print queue.
Open a Run window (Windows Logo key+R), type cmd and press Enter.
Now type these commands, which are in capitals for clarity:
NET STOP SPOOLER and press Enter
DEL %SYSTEMROOT%\SYSTEM32\SPOOL\PRINTERS\*.* and press Enter
NET START SPOOLER and press Enter
EXIT and press Enter
If you are still having issues with the print spooler stopped then right click on the start button, left click on explore, open the windows folder, open system32 folder, open the spool folder, open the printer's folder, then delete everything on the right window.
Then go back and try and start the print spooler again.
Run a full uninstall of the printer software. Disconnect the USB cable.
To uninstall from CD:
Go start and select computer.
Right click on the CD for the printer and left click open in a new window.
Double click on uninstall.
Uninstall printer from the C Drive.
Go to start, computer, c:, windows, program files or program files x86, HP, printer name. Double click uninstall. Restart the computer.
Check to make sure the print spooler is running.
Ran the installation again. Don't connect the USB cable until prompted.
If the print spooler stops again you will need to contact the computer manufacturer to resolve this issue.
Hope this helps.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet MFP scan issue

Laserjet 1536mfp will not scan after windows 8.1 upgrade. Receive a message which says that scanner communication cannot be established. I have turned off the the firewall and it makes no difference.
It prints fine.
What can I do?
This question was solved.
View Solution.

Hi @glcg123 ,
I see that you are having issues scanning since updating to Windows 8.1. I would like to help you resolve this issue.
Did you uninstall and reinstall the printer software after the update?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
If you are still having issues, uninstall and reinstall the printer software.
Uninstalling the Printer Software.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
How is the printer connected? (USB/Ethernet)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Officejet Pro 8600 N911g always cannot print and scan after turn on the Mac from sleep

Dear Community:
This is my printer:
1. Product Name and Number
Product Name HP Officejet Pro 8600 N911g Product Model Number CM750A Product Serial Number {Private Information Removed} Service ID 23022 Firmware Version CLP1CN1150CR Total Page Count 4187
2. Operating System installed (if applicable)
Mac OS X 10.7.5
3. Error message (if any)
After several issue which prevented me from printing I uninstalled all HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro-8600_v12.23.0.dmg after complete I can print and scan. then I go home and put my laptop to sleep. after I come back to work this morning I cannot print and scan again. HP utility cannot connect to that printer because all information there (all fields) displayed as: unknown Please help.
4. Any changes made to your system before the issue occurred
Nothing. I just put my Mac to sleep and put it back on.
5. In the subject title, include a brief, specific description of the problem, and your product information (i.e., product name of your laptop, notebook, printer, other device, etc.)
After several issue which prevented me from printing I uninstalled all HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro-8600_v12.23.0.dmg after complete I can print and scan. then I go home and put my laptop to sleep. after I come back to work this morning I cannot print and scan again. HP utility cannot connect to that printer because all information there (all fields) displayed as: unknown Please help.
Is there anyone out there who have any idea on how to solve this problem? Thank you all in advance.
This question was solved.
View Solution.

OK, here are more specific instructions:
1. Open Finder (double-click the Finder icon in the Dock).
2. On the left side of the resulting Finder window click on Applications.
3. Double-click on "Image Capture".
4. Follow the instructions above.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Trouble Printing or Scanning? Try the HP Print and Scan Doctor

Are you having trouble when you try to print or scan with your Deskjet, Officejet, or Photosmart printer or All-in-One?
Does your print job get “stuck” and never come out of your printer?
Are you getting an error message when you try to scan?
HP suggests that you download and run the HP Print and Scan Doctor. While not all types of printing and scanning communication problems are addressed with this software utility, many common problems are resolved. This utility can be used to troubleshoot and in some cases directly fix common connectivity problems experienced with many of HP’s desktop printers and all-in-one devices when used on Windows XP, Vista, Win 7, and Win 8 systems (administrator privileges are necessary in order to run the utility).
If the HP Print and Scan Doctor detects missing or incompatible software parts, the utility will offer to uninstall the current parts so that a subsequent reinstall process will go smoothly. The uninstall / reinstall process usually resolves printing and scanning connectivity issues with a minimum of further fuss.
Get it here: HP Print and Scan Doctor
Please Give HP Your Feedback! If you use the HP Print and Scan Doctor, HP would like to hear from you afterward – there’s a survey link built right into utility and it only takes a minute or two. Your ideas on how to improve the Print and Scan Doctor help HP design new features and enhancements for all of our customers. Thanks for taking the time to respond.
Do you have a networked printer?
If your printer is network connected rather than connected via USB, you may be experiencing network related connectivity issues. Any network connectivity issues must be addressed first. The HP Print and Scan Doctor will also check for and help you resolve network issues that previously required a separate utility (the HP Network Diagnostic Utility). With the HP Print and Scan Doctor this is no longer necessary! HP has combined all features of the Print Diagnostic, Scan Diagnostic, and Network Diagnostic utilities into our next generation utility!
The HP Print and Scan Doctor runs on Windows XP, Vista, Win 7, and Win 8. You will need administrator privileges in order to run the utility.
Additional information on using HP Diagnostic Utilities can be found here:
www.hp.com/go/tools
Hope you find this useful!
Kent G.
I work for Hewlett-Packard

Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

F2418 prining and scanning issue

Similar Messages

Maybe you are looking for