F3507g mobile broadband driver - Windows 7 - and Cisco Vpn issue

Hi All,
After 3 days trying to install / update latest drivers on my X200/ Windows 7 / 32b, it seems now that my F3507g is now installed correctly…
I can go the a connection over internet and ping some servers BUT when I initiate my Cisco Vpn, ( working perfectly with my Ethernet connection and my Wifi 5300 AGN ) the connection is ok but no incoming or outgoing traffic !!!
Any idea on how to solve that issue ?

Yes, this is a problem with the IPSEC VPN NDIS driver binding your Mobile Broadband driver. You need to read this article and it is explains why and how to work around this issue:
http://www.customsoftwareframeworks.com/blog/fix-vpn-problems-cellular-win7
Good luck

Similar Messages

Windows 8 and IPSec VPN issues

I have a number of customers that leverage the Cisco IPSec VPN. I can connect to the VPN without any problems but when I attempt to RDP, that fails. I have no RDP or ping or anything. Here are some more symptoms of the issues that I find odd:
Anyconnect works just fine
Fortinet VPN clients work fine
Sonicwall VPN clients work fine
Cisco IPSec VPN client is the only one affected
Cisco IPSec VPN client worked fine for months then just decided it was no longer going to allow RDP or ping
I have duplicated this issue on a half dozen or so laptops
This is on a Windows 8 laptop but I believe I have also experienced this on Windows 7
Just to clarify, the IPSec VPN does succesfully connect. But nothing else works after that. I do understand that AnyConnect is the direction that Cisco would like for people to move towards. Unfortunately, I have quite a few customers that are leveraging the IPSec VPN. I have been through a number of laptops in the last year and every single laptop had a working Cisco IPSec VPN for months....then one day it would just stop passing RDP.
Please somebody tell me that there is a workaround for this. I have played with the IP settings for the Cisco Systems virtual adapter in my network and sharing center. I've modified the binding order. I've compared a routeprint from a working laptop to mine....I'm not sure what else to do. I've uninstalled ALL VPN software and only reinstalled the Cisco VPN. So far the ONLY fix I have found is a clean install of Windows and that solution sucks.

Doing a little more homework on this and I noticed that the tunnel details show no bytes sent or recieved and no packets encrypted, decrypted, or discarded....everything is bypassed. My coworker (who is on Windows 7) is able to launch this VPN and connect to the customer's servers without issues and the tunnel details show all of the appropriate data.

Since I upgraded to Lion, my RSA securid token and Cisco VPN client doesn't work any longer. Anyone have suggestions on how to fix that?

Since upgrading to Lion, I can no longer use VPN because my RSA securid token and CIsco VPN Client won't load. Any suggestioins out there?

.

Windows 8 and Cisco Call Connector

Hi,
Does Cisco Call Connector work on Windows 8?
We have a customer running Windows 8 and they have encountered the following error when they tried to install it.
Thanks
Raymond

try using PPTP vpn. it will work without Cisco vpn client. below is config example.
http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml
hope this helps.

Difference between setting up a vpn with windows 7 and cisco routers

Hi.I was wondering what the main difference Is between setting up a vpn with windows 7 or configuring It on cisco routers.
When you setup the vpn on windows 7 or xp do the client and server pc's take care of the encryption and decryption whereas configuring vpn on routers , the encryption and decryption Is done solely by the routers?
If I want to setup a connection where an IP In the same Internal lan Is assigned to the client pc I'm guessing I'd have to use a router configuration.
Thanks

Thank you for the response, lucky for me there was another option. Threatened to cancel with the ISP on the NAT side unless they assigned us a public static ip/gateway/subnet. They ended up doing that and the VPN connected as soon as the changes were made in the Linksys.

Sharing drives Windows 7 and Yosemite

Hi all,
Having major issues trying to copy from an ntfs windows drive to a MAC shared OS Extended drive. (and vice versa)
Tried
MAC SIDE
Connecting to the shared PC drive, drag and drop / ctrl + c and ctrl + v.... eventually fails /times out
Confirmed all power settings set to max, ie no hdds to go sleep etc.
Tested at work with 2 machines and it appears the same thing happens. Yosemite + windows 7
PC SIDE
Mapping the Shared mac drive on windows, drag and drop / ctrl + c and ctrl + v.... eventually fails
xcopy ntfsdrive:/. OSXdrive:/ /E
Error:
File creation error - Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator. (google not helping as issue seems to be XP related)
Running Yosemite on mid 2011 iMac Windows 7 on with i5 processor both min 8 gb ram etc..
Help im stuck
Thank you

The best way to do this would be to use a flash drive formatted in FAT32 to put all of the files that will fit on it from the windows(or mac) hard drive, boot os x (or Windows), copy the files to the mac hard drive (or windows hard drive), delete the files on the flash drive, and repeat until all of the files are transferred.

Windows 7 and blinking cursor issue...

(Just an FYI...I originally posted this in the MBP forum because I didn't realize there was a bootcamp forum)
I recently had my computer repaired through AppleCare. They replaced the logic board, top cover, a connector and battery. When I first got the computer back, I turned it on, booted to the Mac partition, everything was good. I then booted to Windows with the Bootcamp partition and everything was good. Even the stuff I had open before the damage were still up. I shut it down, boxed everything up and didn't touch it until I got home.
When I got home, I booted up Windows 7 and now all I get is it boots to a black screen with the cursor. I ran the repair utility, tried safe mode and it says no errors are found, however, it still won't load. I haven't figured out why it booted up the first time I got the computer back but now it won't do anything. I never got a chance to back everything up because my computer was damaged from liquid damage, but I can still see all the files on my Bootcamp partition through finder from the Mac side.
I don't know exactly why it's doing this or what to search to find an answer to the problem. When I first got my MBP, I installed Windows 7 through and upgrade disc from my job, so I don't know what my next steps should be.
Other steps:
Tried WinClone to copy the drive and it gave me an error message on the log.
Tried to run system repair several times and it came back with no errors. Same for memory diagnostic tool. Everytime I run the repairs, it finds no errors but still boots up to the black screen with cursor. Ugh, this is so frustrating.
Right now I have most of my files backed up on my external drive, but I still want to find a way to clone the drive and then it looks like my only choice is to do a clean install. How do I do that? Someone else set up the partition for me when I got my computer, so I don't know how to remove the version of Windows 7 to do a clean install or if I have to start messing with the partition. I only have an upgrade disk.
Any more thoughts? I thought about calling AppleCare but I doubt they'd help since it's Windows 7, but it was not doing this before the repair. I guess I'm lucky I still have access to the files.

Leeopard huh?
You need Snow Leopard w. 10.6.x to get 3.0.
If it works and no issues fine though probably the first time I have read someone did.
BC 2.2 was more about XP and some support for Vista.

Windows 8 and LR tethering issue with D7000

I just purchased a new Lenovo W20 laptop with Windows 8 pro, installed LR and PS6. All of this is up to date on patches.
I tried to tether my Nikon D7000 to a USB 2.0 and USB 3 port and have the same issue...
LR sees the D7000 and lists it in the tethering bar and sees the settings for aparture, ISO, and shutter speed. Problem is it will not import and show the files from the camera when I shoot, nor will it trigger the camera with the LR tethering button.
I have successfully shot with this camera when tetered to another laptop using windows 7 and the same LR current version.
Do I likely have a LR or Nikon driver issue, or is there some basic compatability issue with Winodws 8 that is yet to be worked out?
When I use explorer, i can see the files on the D7000 and the thumbnails show up fine in explorer.
Leroy

Are they using the built in reader in Windows 8 or is it opening in Adobe Reader?
I've noticed the built in reader app doesn't close files unless you close out of the application. So, you wouldn't be able to delete them until you close them.

IPhone OS 3.0 - internet tethering and Cisco VPN Client

Hello,
The latest OS for the iPhone allows users to tether their iPhone to a Mac/PC so that the user can browse the internet through the carriers mobile 3G network.
I can confirm that internet tethering works on my Macbook Pro, but the following error is displayed when i load the CiscoVPN Client (version 4.9.01 (0100))
"Error 51: Unable to communicate with the VPN subsystem.
Please make sure that you have at least one network interface that is cuurently active and has an ip address and start this application again."
Does this mean that the Cisco VPN client cannot see the internet connection supplied by the iPhone even though i can browse the internet while this error is being displayed??
Regards,
Eddie S

Same problem here and I'm wondering the same. I also noticed that the same error comes also when my ethernet connection and iPhone tethering are active at the same time. Then there really should be a connection.
Despite that, I have the same problem and using bluetooth tethering doesn't solve this. Still the same error even though Internet connection works otherwise fine.
Any suggestions? Have Cisco tested this?
I'm using MacBook Pro 13" OS X 10.5.8, iPhone 3GS 3.0.1 with official finnish carrier Sonera, Cisco Systems VPN Client 4.9.01 (0100)

Cisco VPN issues on Windows 7 bootcamp

Cisco vpn client does not work properly with bootcamp, I can connect and authenticate and bring up the tunnel but cannot access anything through the tunnel, if I look at the Cisco VPN client statistics, all the packets are being discarded.
anyone had the same issue?

Same issue here, Windows 8 Pro 64bit, eToken (Aladdin) Pro (V.with Cisco Systems VPN Client Version 5.0.07.0440 -> VPN Error-Log :
20     12:59:24.194 08/14/13 Sev=Warning/2      CERT/0xA3600383
Could not load certificate cn=uxyz (VPN),ou=VPN,o=uxyz GmbH,st=Germany,c=DE from store Microsoft User Certificate. Reason: store empty
21     12:59:24.195 08/14/13 Sev=Warning/2      CERT/0xA3600456
If you are using a smartcard or token containing a certificate, verify that it is plugged in and try again.
22     12:59:24.195 08/14/13 Sev=Warning/2      IKE/0xE3000234
Unable to open certificate (cn=uxyz (VPN),ou=VPN,o=xyz GmbH,st=Germany,c=DE).
If you are using a smartcard or token containing a certificate, verify the correct one is plugged in and try again.
VPN-Client Responding : Error 403
Thanks in advance for any ideas or solution !!

Using portable drives between MS and Apple- permissions issue

Hi all,
I am hoping for some advice with a minor issue I am having.
I have a Maxtor 120GB portable drive which has been formatted to FAT, not NTFS. At work I use MS Windows XP and I saved some documents onto the portable drive so I can take the work home with me.
The issue I am having right now is that some of the files I saved are read only and I am unable to change the permissions to Read & Write (via Get Info to change the permissions).
What can I do to resolve the issue, so I can work from home and at work.
Thanks in advance!

FAT doesn't support file permissions, so I'm not sure what your are seeing.
Can you copy them to your Mac and edit them there?
Another thing to check is if they are locked. Check in Get Info.
Message was edited by: Barney-15E

AFP Freeze and Cisco VPN Client w/ new Macbook Pro

I have an Intel Core Duo Macbook Pro with all software updates installed and running Cisco VPN client v4.9.01 (0030). If I try to connect to one of my clients via VPN and then connect to one of the server shares, afp basically freezes. I have added a snip of the log below. BUT - I take the same laptop onsite and try to connect to the same server, it works like a champ. I have tried the VPN connection from multiple source points (ie, different ISPs and routers/firewalls) and wired and wireless and all result in the same. I am frustrated and running out of options. Note that the same problem occurred with the previous Cisco VPN client and I thought the newer version would fix it - id didn't. Any help would be much appreciated.
tia,
Bill
Oct 27 16:05:01 my-computer kernel[0]: AFP_VFS afpfs_Reconnect: doing reconnect on /Volumes/ADVSERV
Oct 27 16:05:01 my-computer kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/ADVSERV
Oct 27 16:05:01 my-computer kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/ADVSERV
Oct 27 16:05:01 my-computer kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/ADVSERV
Oct 27 16:05:01 my-computer kernel[0]: AFP_VFS afpfs_Reconnect: Restoring session /Volumes/ADVSERV
Oct 27 16:05:01 my-computer KernelEventAgent[59]: tid 00000000 received VQ_NOTRESP event (1)
Oct 27 16:06:02 my-computer kernel[0]: AFP_VFS afpfs_Reconnect: doing reconnect on /Volumes/ADVSERV
Oct 27 16:06:02 my-computer kernel[0]: AFP_VFS afpfs_Reconnect: connect to the server /Volumes/ADVSERV
Oct 27 16:06:02 my-computer kernel[0]: AFP_VFS afpfs_Reconnect: Opening session /Volumes/ADVSERV
Oct 27 16:06:02 my-computer kernel[0]: AFP_VFS afpfs_Reconnect: Logging in with uam 10 /Volumes/ADVSERV
Oct 27 16:06:03 my-computer kernel[0]: AFP_VFS afpfs_Reconnect: Restoring session /Volumes/ADVSERV
Oct 27 16:06:03 my-computer KernelEventAgent[59]: tid 00000000 received VQ_NOTRESP event (1)

Hi Bill,
Do you have any comparison data on services that DO work? I don't connect remotely to any Apple services so can't vouch for AFP always working, but have no issues with RDP services for Windows servers. Running 4.9.00 (0050). I have however just quickly VPN'd to a client and successfully opened an AFP share and browsed around over VPN - didn't even hesitate in establishing the connection.
When you mention taking the machine onsite i am assuming that you directly access the AFP shares and not via VPN, hence confirming that the VPN software is potentially the issue?
Are you running IPSEC over UDP or TCP? My transport is over UDP.
Good luck,
Justin

Mac Lion and Cisco VPN client problems

I just installed Lion 10.7 on my iMac and can no longer use the downloaded Cisco VPN client to connect to Microsoft Remote Desktop and access the PC in my company's office. When I try to launch the VPN client I get Error 51. I used to be able to enter a command in the Terminal as a workaround to use the VPN client when that happened, but that no longer works. I have tried booting into 32-bit mode; doesn't work. I tried to use the Cisco client built into Lion using settings provided by my company. When I try to connect I get the following message: "The negotiation with the VPN server failed. Verify the server address and try reconnecting."
I have searched the web looking for a solution. My company's tech department is stumped; the Apple Geniuses haven't been able to help. Does anyone have any ideas how I can use either the downloaded Cisco VPN client or the client built into Lion?
Sent from Cisco Technical Support iPad App

Here is the link which you can use to configure the inbuilt VPN client in MAC Lion.
http://glazenbakje.wordpress.com/2011/07/28/how-to-create-a-cisco-vpn-connection-in-apple-mac-os-x-lion/
Make sure you configure the attributes correctly.
Secondly the inbuilt VPN client code of Lion is made in collaboration with Cisco so there will not be any issues of compatibility.
Cheers,
Rohan

Back To My Mac and Cisco VPN client

I've used back to my mac for a while and love it. Recently I've had to start using the Cisco VPN client and every time I use it it says "Because Back to My Mac is turned on, your VPN connection cannot be established with the server. Would you like to turn off Back to My Mac?". Is there any way to run them both without having to keep starting and stopping back to my mac?

I too have this issue.
Every time I have to connect via VPN, I have to disable my Back to My Mac.
Kinda *****.
Any solution?

Windows 7 and Multiple Monitor Issues

Alright, I have spent the past 3 days searching these forums as well as on Microsoft's support pages and all of Google to find the answer to my issue and it seems as though I'm the only one who is running into this problem.
I have a 15 inch Macbook Pro with the GeForce 9600M GT Nvidia Graphics card with the latest version of Mac OSX and Bootcamp installed on it. I have Windows 7 installed in bootcamp. I just purchased a Mini DisplayPort to VGA cord with a VGA cord so as to connect my computer to my Sony Bravia HDTV to use as a second monitor. I plug in the cords, plug them into my TV, and put it into the proper input and it works like a charm. Then I go and boot up in bootcamp under Windows 7, plug in the cord, and my screen gets to the "starting windows" logo and then it goes black. I push ever button, I try control alt delete, nothing. I have to hold down the power button to turn off the computer and then turn it back on.
I turn it on, boot up into Windows 7, let it load, then plug in the cord, and the computer display instantly goes black, again, and yet nothing displays on the TV. Again, I try everything to no avail, so I power it off and back on. I go through this at least 10 times to no avail. I finally give up and try again the next day.
Next day, I plug it in, and the monitor stays up, but yet nothing is displayed on the TV. I go to my resolution settings in Windows, and go to the multiple monitors tab, and select every possible option (extend, duplicate, etc) and nothing will display on my TV. I try to change the settings to which it responds with "unable to save display settings" and nothing changes. I attempt to enter the nvidia program and make changes that way. The TV is detected, but when I select it and attempt to apply anything, no changes take effect and I am left with only the laptop display. Keep in mind I uninstalled and reinstalled all of the video drivers and such.
Finally I get fed up so I purchase a Mini DisplayPort to DVI adapted and a DVI to HDMI adapter. I try again. Again in OSX it launches immediately, no problems. I go back into Windows, and immediately I'm dealing with the instant black screen.
I'm going crazy over here trying to figure this out. I know it's possible to do this because I've seen people on youtube doing this and again it works on OSX so why the heck won't it work? If anyone has any idea what's going on here please help me out. Thanks.

JonMarx... I'm having the exact same problem. I'm in the exact same situation as you are. I'm going mad, and it's only by divine providence that I've finally located the only other person who knows what I've been going through. I've spent at least 20 hours trying to get this started back up, to no avail.
I had the secondary display working peachy for a while, long enough to configure everything to be exactly how I wanted it. I unplugged the monitor from the computer just to see what would happen, and that's when the problems started. I managed to get it to work one last time for a brief period a few hours later, but the way it just clicked on made it feel too good to be true.
I've had a wierd problem with a phantom display as well. The display will frequently show up as being available in both the nVIDIA panel and the windows settings, but if I apply the settings, they won't go through. I got a few screenshots of it the last time it happened.
I was just about to reinstall windows completely, but it seems that I'll just run into the same problem again if I do... Here's to hoping a solution is found.

F3507g mobile broadband driver - Windows 7 - and Cisco Vpn issue

Similar Messages

Maybe you are looking for