F4-Help (drop down) in customer search via Tel. No.

HI,
F4-Help (drop down) in customer search used to have a search functionality which allowed 'Customer' search via 'Telephone Number'. For example, in tcodes: xd03, vd03 or where ever there is a customer input field is.
Now in 4.7 this does not exists. Does anyone knows how to restore it?
Thanks

Hi Nablan,
I found a note 195508 which states that modify two views in SE11 (V_CONTACT and VKNK_CONTACT). The second one does not exists in 4.7. The instructions for first one is incomplete.
I am still searching for answers.
Thanks for your suggestions to look at DEBI. I am curious as how you found DEBI as the relevent 'search help'.
Thanks
Nave

Similar Messages

Table TZC37 field STATU search help drop down is not pulling any values?

Hi,
In table TZC37 field STATU(Contract status) search help is not pulling any values( drop down list when execute the table values) .. but the table has values for this field.
And also I checked in the configuration, this field has values in the config also. But still the search drop down is not getting any values.
Can any one knows what could be the reason and how to solve this issue?
I am using this field in transaction FNVS when searching loan number based on Status field.
Thanks for your time.
Murali.

Hi Micky,
I am using this in transaction FNVS (when searching Loan number based on Status field( this is Custom Search help added this field ( VDARL- SSTATI )
Value table for this data type - STATI is TZC37.
While getting records from these tables(TZC37 or VDARL ) I am trying to use drop down values for searching data using this field SSTATI. But its not showing any drop down values. It supposed to show what ever values exists for this field right?
I checked in the cofig of this table and values exists for this field.
Any help appreciated.
Thanks.

How to set a default value in a Value Help Drop Down List

Hi,
I used an age Range field in my adobe form, the control is a Value Help Drop Down List. i am populating the drop down using following code.
IWDAttributeInfo ageInfo = wdContext.nodePersonalData().getNodeInfo().getAttribute("CTAgeRange");
     ISimpleTypeModifiable ageType = ageInfo.getModifiableSimpleType();
     IModifiableSimpleValueSet ageValueSet = ageType.getSVServices().getModifiableSimpleValueSet();
     ageValueSet.put("1","21-29");
     ageValueSet.put("2","30-34");
     ageValueSet.put("3","35 or Above");
My requirement is to set a default value e.g. 30-34 in the age range field.
I want to give input to iform from my Implementation code only.
Please help.
Thanks in advance

hi Ranjan,
that means you have to set at design time,
to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<default value>)
This generally done in Initialization method of the controller.

Firefox help drop down menu disabled

I'm running Firefox 26, as far as I can tell. When I try to open the Help drop down menu with my mouse or Alt-H, nothing happens. The Help menu doesn't drop down.
I scanned for Malware, but found nothing.
Happy Holidays!

*If you have many extensions then first enable half of the extensions to test which half has the problem.
*Continue to divide the bad half that still has the issue until you find which one is causing it.

When I select an option from the help drop down menu it just goes away. It does not go to the help option I chose.

When I select an option from from the help drop down menu it just goes away. It does not go to the query I selected by hitting the keypad.

Jody
you don't tell us Device or OS?
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
ÇÇÇ

Lightroom help drop down

My online help drop down has stopped working. Message: Online help for Lightroom is not available. Check the internet connection and try again. I had no previous problem. My internet connection is working fine

Most likely the Internet connection problem is on the Adobe end of the wire. I suggest you wait for a short time and try again.

KM folders as drop-down on advanced search

HI All,
When user hits the advanced search option, there is option of restricting search to folders and sub-folders.
This is available in the folder structure. How can this be made to appear on a drop-down option. The user wants to have it in the same way as the sdn search options wherein the search can be restricted based on the dropdown of category/folders.
Please advise.
Thanks and regards,
Arun

Hi Arun,
This is what SDN Advanced Search provides.
Next to the Search term, it provides the option to select an index as a Dropdown choice. Below the search bar, it gives an option to filter the search result through a set of defined filter values like Product etc. This means that the content has been Meta Data tagged for the values represented by the check boxes.
If you select a checkbox, then the result set displayed to you will be filtered according to that.
What you basically need to do, is to define multiple indexes according to your needs and then define meta data properties which are assigned to each document / folder. This way you can achieve what you need.
I hope this helps, if it does, then please award points in SDN.
cheers,
Shantanu

I cannot click on a subject in the google drop down box to search without typing it in. Never happened before with the Google bar.

clicking on a subject in the Google drop down box does not begin a search unless I type subject matter in the box first.

Known problem with the Google Toolbar extension. <br />
http://www.google.com/support/toolbar/bin/static.py?page=known_issues.cs
Use the arrow keys to navigate down and up the suggestions, and use the Enter key to select.

Swap textbox for drop-down list in "search" section of work list panel

Hi everybody
I am using albpm 6.0, when I do searches for instances in the work list panel I can add conditions to the search, for example if I select the "Priority" condition I can select my condition from a drop-down list but if I select the "Description" condition there isn't drop-down list instead a textbox appear so my question is: Can I control or change that behavior? I would like to do that when someone select the "Description" condition a drop-down list containing the values appear so he doesn't have to type anything.
Thank you

Hi,
can you share the solution,even i was trying to archive the same.Thanks in advance.

Missing drop down menu in search bar

My search bar is missing the drop down menu. Yahoo has mysteriously appeared as the default engine in my search bar window. When I click the search icon, no drop down menu appears but rather my home page defualts to Yahoo.
This just started today.

I think Yahoo replaced your search bar. There would be a solution in
* http://kb.mozillazine.org/Problematic_extensions

Getting rid of drop down menu in search bar

Is there any way to get rid of the drop down menu that appears below the url search bar when you're typing in an address? It's really annoying.
I've been looking around in preferences and can't find it.

I think Yahoo replaced your search bar. There would be a solution in
* http://kb.mozillazine.org/Problematic_extensions

Add search help/drop down list to a standard field in MIR7

Hi All,
I have a requirement to add a search help on one of the strandard field in MIR7. This field has no search help in dictionary (SE11). Do you have any idea on how to do this? Is there any exit that i can use to?
Please help!
Thanks in advance.

Hi Akira,
Please check the below threads.
[how to create F4 for the standard transaction]
[F4 HELP for standard field..;
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/daeda0d7-0701-0010-8caa-edc983384237]
[Re: Adding a field in standard search help;
Edited by: Prasath Arivazhagan on Apr 13, 2010 5:38 AM

Using XPATH to populate a drop down with custom text enabled?

Hello,
I am using the custom state field provided by Adobe Form Designer 7.1, and I checked the option to allow custom text entry.
Within my workflow, I have script that will access the XDP path and set the state to a string. I get the _state value from a DB query (where _state = _rs.getString(#)), but here I'll use a static value to provide a good example:
String xdproot = "/process_data/appform/form-data/data/xdp/datasets/data/App";
String _state = "Fl";
patExecContext.setProcessDataValue( xdproot + "/State", _state );
When I received the form from the workflow (via email) my other fields were set properly, but the state field was blank.
Should I use setProcessDataStringValue?
Thanks for your help!
Rob

Hi Rob
I don't believe using StringValue will make any difference. If you're passing a string, it should amount to the same thing.
Some things to try:
Try setting the value using the SetValue QPAC - does that work?
Try testing your form by setting an XML file containing "Fl" in the state field as your preview data (In Designer, File/Form Properties)
Try using the Variable Logger to check the data in your form is set correctly.
http://www.avoka.com/Avoka/qpac_library.shtml
Are you using Reader 8.1. We've experienced several problems with DropDowns in 8.1. Try using 7.0.5 or greater.
Good luck...
Howard
http://www.avoka.com

When I type in search words in the google box and then drop down to the search that matches what I want, and click on it, it does absolutely nothing. It used to complete the search, how do I get it to complete the search?

Here is an example:
I type Denver Dum in the google box.
It gives me several options, one is Denver Dumb Friends League, which is what I want. I bring the cursor to Denver Dumb Friends League and click. It does nothing. The google box still has Denver dum in it. The only way to get a search to be completed is if I type in the whole phrase and hit enter. How do I get it to search using just part of a phrase? It used to do this before I upgraded to the newer version of firefox. Thanks!

Do you have the Google Toolbar installed?
See:
* http://www.google.com/support/toolbar/bin/static.py?page=known_issues.cs

Different Files Returned when using the Drop Down list on the Search Results Page

Hi
I have a result set of 22 documents when I select Date (Newest) from the drop down on the search results page. The third document down is called "LL".
If I now select Date (Oldest) I have a result Set of 22 documents. However, when I move to the second page. The number of documents has reduced to 20 documents and my document "LL" which I would have expected to be the third from bottom document
is not there.
Am I doing something wrong here ? Search is OOTB. I have added some refiner columns.
Regards
Nigel
Nigel Price NJPEnterprises

Hi Nigel,
It is by design. The "About x results" is presented when the total number of results is uncertain, and that is when collapsing (i.e. duplicate detection in this case) is enabled and the result set is partially processed. By default, a result page
shows 10 results at the time. Therefore, for result sets with less than or equal to 10 results you will always get an accurate number of results and hence “About” is omitted. For more than 10 results you will get the “About x results” on the first page until
you get to the last page of results and only then we know the exact number of results and hence can omit the “About”.
Note that when you page out in the result set you will notice that the X in the “About X results” can vary quite a lot. That is because the total number of results is estimated based on the collapsing done so far. This is a common way of doing it by other
search engines as well.
Here is a simlar post for your reference:
http://spbreed.wordpress.com/2013/09/14/sharepoint-2013-solution-to-inconsistent-search-results-count/
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

F4-Help (drop down) in customer search via Tel. No.

Similar Messages

Maybe you are looking for