F4 HELP FOR ONLY SELECTED FIELD VALUES

Hi,
I have to display the F4 help for the selection screen field parameter. From the ICON table, I need to display the field ID values. In the ICON table, I have lot of field values for the field ID, but I need to display only 3 field values into F4 help.(like say @07@, @08@, @0A@ only at the F4 help).
Thanks in advance.
Regards
Ramesh mavilla.

Hi,
See the follwoing code example
REFRESH: I_DYNPREAD .
CLEAR : I_DYNPREAD .
I_DYNPREAD-FIELDNAME = 'P_KAPPL'.
APPEND I_DYNPREAD.
CLEAR I_DYNPREAD.
L_REPID = SY-REPID .
L_DYNNR = '1000' .
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = L_REPID
DYNUMB = L_DYNNR
TABLES
DYNPFIELDS = I_DYNPREAD.
IF SY-SUBRC EQ 0.
READ TABLE I_DYNPREAD INDEX 1.
P_KAPPL = I_DYNPREAD-FIELDVALUE.
ENDIF.
REFRESH: I_DYNPREAD .
CLEAR : I_DYNPREAD .
REFRESH: I_KSCHL.
TRANSLATE P_KAPPL TO UPPER CASE.
TRANSLATE P_KVEWE TO UPPER CASE.
SELECT KAPPL KVEWE KSCHL VTEXT FROM T685T
INTO CORRESPONDING FIELDS OF TABLE I_KSCHL
WHERE KAPPL = P_KAPPL
AND KVEWE = P_KVEWE
AND SPRAS = 'EN'.
IF SY-SUBRC <> 0.
MESSAGE E001(ZZ) WITH 'No Condition Type exist for Application'.
*p_kappl ' and Usage' p_kvewe.
ELSE.
REFRESH: I_FIELDS.
I_FIELDS-TABNAME = 'T685T'.
I_FIELDS-FIELDNAME = 'KAPPL'.
I_FIELDS-SELECTFLAG = ''.
APPEND I_FIELDS.
I_FIELDS-TABNAME = 'T685T'.
I_FIELDS-FIELDNAME = 'KVEWE'.
I_FIELDS-SELECTFLAG = ''.
APPEND I_FIELDS.
I_FIELDS-TABNAME = 'T685T'.
I_FIELDS-FIELDNAME = 'KSCHL'.
I_FIELDS-SELECTFLAG = 'X'.
APPEND I_FIELDS.
I_FIELDS-TABNAME = 'T685T'.
I_FIELDS-FIELDNAME = 'VTEXT'.
I_FIELDS-SELECTFLAG = ' '.
APPEND I_FIELDS.
CLEAR: V_SEL.
CALL FUNCTION 'HELP_VALUES_GET_NO_DD_NAME'
EXPORTING
CUCOL = 0
CUROW = 0
DISPLAY = ' '
SELECTFIELD = 'KSCHL'
TITEL = 'Cond Type'
IMPORTING
IND =
SELECT_VALUE = V_SEL
TABLES
FIELDS = I_FIELDS
FULL_TABLE = I_KSCHL
IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF. "SY-SUBRC.
And also go throw the link which it clears more about F4
Check the link below for creating collective search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee86446011d189700000e8322d00/content.htm
Check the ink below for creating elementary search help
http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21ee5f446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm
<b>Reward with points if helpful.</b>
Regards,
Vijay

Similar Messages

  • F4 Help for standard selection field of tcode F-02 for the field of xblnr

    Hi Experts..........!
    I need F4 help fo the field of bkpf-xblnr in that selection screen of tcode F-02  .
    please help me....!
    Regards ,
    vamsi

    Hi,
    Go for Implicit enhancement...Pls go the link..
    Re: Executing a Planning Enhancement in Debug

  • F4 Help for the selection screen field

    Hi Gurus,
    I have to display F4 help for a selection screen field. i am using following code:
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
             EXPORTING
                  retfield        = 'CODE'
                  dynpprog        = lw_repid
                  dynpnr          = sy-dynnr
                  VALUE_ORG       = 'S'
             TABLES
                  value_tab       = gi_text
                 field_tab       = li_fields_tab
                  return_tab      = pi_return_tab
             EXCEPTIONS
                  parameter_error = 1
                  no_values_found = 2
                  OTHERS          = 3.
    My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
    But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
    001    test
    001    test1
    but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
    Please help me out.
    Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.

    Sachin,
    I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
    REPORT zktest01 .
    DATA :
      BEGIN OF value_tab OCCURS 0,
        field  LIKE e070-trkorr,
        text   LIKE e07t-as4text,
      END OF value_tab.
    DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
          t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
          t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
    PARAMETERS : p_field  LIKE value_tab-field,
                 p_text   LIKE value_tab-text. "NO-DISPLAY.
    INITIALIZATION.
      t_fldtab-tabname   = 'VALUE_TAB'.
      t_fldtab-fieldname = 'FIELD'.
      t_fldtab-langu     = 'E'.
      t_fldtab-position  = 1.
      t_fldtab-offset    = 0.
      t_fldtab-fieldtext = 'Key'.
      t_fldtab-reptext   = 'Key'.
      t_fldtab-leng      = 20.
      t_fldtab-intlen    = 20.
      t_fldtab-outputlen = 20.
      t_fldtab-datatype  = 'CHAR'.
      t_fldtab-inttype   = 'C'.
      t_fldtab-headlen   = 20.
      t_fldtab-keyflag   = 'X'.
      t_fldtab-lowercase = ' '.
      APPEND t_fldtab.
      t_fldtab-tabname   = 'VALUE_TAB'.
      t_fldtab-fieldname = 'TEXT'.
      t_fldtab-position  = 2.
      t_fldtab-offset    = 20.
      t_fldtab-fieldtext = 'Text'.
      t_fldtab-reptext   = 'Text'.
      t_fldtab-leng      = 60.
      t_fldtab-intlen    = 60.
      t_fldtab-outputlen = 60.
      t_fldtab-headlen   = 60.
      t_fldtab-keyflag   = ' '.
      t_fldtab-lowercase = ' '.
      APPEND t_fldtab.
      value_tab-field = '101'.
      value_tab-text = 'dddd'.
      APPEND value_tab.
      value_tab-field = '202'.
      value_tab-text = 'aaaa'.
      APPEND value_tab.
      t_dynmap-fldname = 'FIELD'.
      t_dynmap-dyfldname = 'P_FIELD'.
      APPEND t_dynmap.
      t_dynmap-fldname = 'TEXT'.
      t_dynmap-dyfldname = 'P_TEXT'.
      APPEND t_dynmap.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
                retfield        = 'FIELD'
                dynpprog        = 'ZKTEST01'
                dynpnr          = '1000'
                dynprofield     = 'P_FIELD'
                value_org       = 'S'
           TABLES
                field_tab       = t_fldtab
                value_tab       = value_tab
                return_tab      = t_rettab
                dynpfld_mapping = t_dynmap
           EXCEPTIONS
                parameter_error = 1
                no_values_found = 2
                OTHERS          = 3.
      IF sy-subrc EQ 0.
      ENDIF.
    START-OF-SELECTION.
    Jeffrey Satriadi

  • Providing F4 help for the same field on selection screen

    Hello Experts,
    My requirement is :
    There are 2 radio buttons and a parameter "p_file" on my selection scree.
    1. rb_appl
    2. rb_pres
    If the radio button rb_appl = 'X', I need to place the logic of F4 help of application server for the field p_file. Else if the rb_pres = 'X', then I need to place the logic of F4 help of presentation server for the same field p_file.
    I have written the code in the below manner
    PARAMETERS: rb_appl RADIOBUTTON GROUP rad DEFAULT 'X',
                             rb_pres RADIOBUTTON GROUP rad ,
                             p_file   TYPE ibipparms-path.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      IF rb_appl = 'X'.
          PERFORM f_applictn_server_filenm.
      ELSEIF rb_pres = 'X'.
        PERFORM f_presentation_filenm.
      ENDIF.
    But I am getting the F4 help for only the radio button for which i have placed the default value in the parameters.
    So please let me know how to define the F4 help for the same field based on the radio buttons.

    Hi,
    You can acheive the same by the addition of [USER-COMMAND fcode].
    RADIOBUTTON GROUP group [USER-COMMAND fcode] - The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
    So you code should be altered as
    PARAMETERS: rb_appl  RADIOBUTTON GROUP rad
                         USER-COMMAND radclick    "Addition which you have to make.
                         DEFAULT 'X',
                rb_pres  RADIOBUTTON GROUP rad ,
                p_file   TYPE ibipparms-path.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      IF rb_appl = 'X'.
        PERFORM f_applictn_server_filenm.
      ELSEIF rb_pres = 'X'.
        PERFORM f_presentation_filenm.
      ENDIF.
    Thanks & Regards,
    Harish

  • Dynamic value help for a table field to fill two fields, how to?

    Hi all gurus,
    In SRM 7 I defined a dynamic value help for a single field (ZZ_PROLE_R3) of my header custom table.
    That's the code from WDDOMODIFYVIEW in the webdynpro /SAPSRM/WDC_DODC_CT, view V_DODC_CT:
    DATA: lo_tabnode        TYPE REF TO IF_WD_CONTEXT_NODE.
          DATA: lo_tabnode_info   TYPE REF TO IF_WD_CONTEXT_NODE_INFO.
          DATA: tab_value         TYPE WDR_CONTEXT_ATTR_VALUE_LIST,
                wa_value          TYPE WDR_CONTEXT_ATTR_VALUE.
          lo_tabnode = wd_context->GET_CHILD_NODE( name = 'THCUS' ). "the custom table node
          lo_tabnode_info = lo_tabnode->get_node_info( ).
          wd_this->GET_VALHELP_ZZ_PROLE_R3( EXPORTING iv_guid = lv_guid
                                            IMPORTING ZZ_PROLE_R3_VALHELP = tab_value ). "this method returns the dyn value table
          lo_tabnode_info->set_attribute_value_set( name = 'ZZ_PROLE_R3'
                                                     value_set = tab_value ).
    The method GET_VALHELP_ZZ_PROLE_R3 dynamically builds the value help table tab_value; such table is made up by two fields:
    value : contains the value of the field
    text   : contains a description of the value
    The above solution works; now I'd like to enhance it. The custom table THCUS contains also a field called ZZ_PROLE_R3_DESC, which represents the description of ZZ_PROLE_R3. It is, exactly, the TEXT field in tab_value.
    So I'd like to do as follows:
    - the user clicks on the search help for ZZ_PROLE_R3 field of the table;
    - the above described value help appears;
    - after the selection, both ZZ_PROLE_R3 and ZZ_PROLE_R3_DESC are filled with the selected couple value - text chosen from the value help.
    Could anyone help me achieving such a behaviour?
    Again, a little request... when I open the above value help dialog box, the window itself has a label "Floorplan Manager application for OIF.." that obviously I'd like to redefine (e.g. "Role selection value help"). Is there any way to do that?
    Thanks in advance

    Chris Paine wrote:
    It seems to me - given that your code is in wddomodifyview that you are trying to have different dropdowns per row
    - I'm not sure where you are populating lv_guid - but I'd guess it is an attribute of the row selected? If it isn't then I can't see any reason that you would do this code in wddomodifyview and not wddoinit.
    Hi Chris and thanks for your help,
    lv_guid is the GUID of the document's header; I need to pass it to the method that populates my value help table because the values in it are derived from some fields on the document. (the situation actually is more complex; there's an RFC call on the backend for which the document is intended for to retrieve the data that populate the value help...).
    I'm quite unexperienced on webdynpro and terminology; if dropdown menus are fixed selection option that appears on a field, I guess this is not my case. I did a pair of screenshot to provide an idea of what the solution by now is, and what "I would like to have":
    [Pre-selection (F4 icon on the field in table)|http://imagebin.ca/view/npIsaqF.html]
    [Value Help popup for the field ZZ_PROLE_R3|http://imagebin.ca/view/8fZUh3T.html]
    [Result by now |http://imagebin.ca/view/3PaqdvE.html]
    [Result I'd like to have.|http://imagebin.ca/view/dExR0J.html]
    Chris Paine wrote:
    However - by your comment on the "value help dialog box" I am guessing you are using an input field? If this is the case then I would strongly suggest that you change/enhance the structure of the context node THCUS (btw, better coding practise to refer to it as wd_this->wdctx_thcus when using the get child node construct) so that you refer to an actual SAP ddic search help, if you then associate in the structure the value and text fields then populating the text field should happen automatically. Also you'd have the nice side effect that your value help dialog would be named after the associated ddic search help.
    Thanks for the code suggestion, I'll apply that. For what concerns the context node THCUS... It is, by standard, a node which I can't explictly find in the context for the view V_DODC_CT. The problem is that ZZ_PROLE_R3 and the corresponding description field ZZ_PROLE_R3_DESC of the table must be filled with data retrieved dynamically @ runtime from the backend. So I guess I can't populate a val help referring to a dictionary table/field; I'd rather do as follows:
    - retrieve what's the target backend for the document (to do so, I have to process the document .. that's why the header guid passed to my method);
    - RFC call to a custom method that extracts possible values for the specific backend;
    - bind the ammissible values to the value help.
    Chris Paine wrote:
    I realise that this is rather a lot - so if you have any specific question please do respond - hopefully I or someone else will be able to clarify.
    Thanks again for your help; additional info as well as code examples would be highly appreciated

  • Can we create serach help for a selection screen field

    Can we create serach help for a selection screen field with out creating searchhelp object.
    I mean is it possible to create serchelp in the program itself with some specific values i want to give.
    E.g say we can define any internal table and fill it with values and using that into selection screen fields
    Regards
    Mave

    AT SELECTION-SCREEN ON VALUE-REQUEST FOR paymeth.
      PERFORM PAYMENT_HELP.
    FORM PAYMENT_HELP.
      DATA: begin of DESCR_TAB occurs 0,
            DESCR LIKE BKPF-BKTXT,
            END OF DESCR_TAB.
      DATA: gd_repid like sy-repid.
      gd_repid = sy-repid.
      DESCR_TAB-DESCR = 'aaaaa'.
      append DESCR_TAB.
      DESCR_TAB-DESCR = 'bbbbb'.
      append DESCR_TAB.
      DESCR_TAB-DESCR = 'ccccc'.
      append DESCR_TAB.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
                retfield    = 'DESCR'
                DYNPPROG    = gd_repid
                DYNPNR      = '1000'
                DYNPROFIELD = 'paymeth'
                VALUE_ORG   = 'S'
                DISPLAY     = ' '
           TABLES
                value_tab   = DESCR_TAB.
    endform.
    Svetlin

  • Implementation of F4 value help for a search field which is an EEWB field

    Hi...
                I am trying to create a F4 value help for a search field which is an eewb field.The f4 value help jus need to be a pop up containing the values of the field existing in the system.Since this is a search field the GET_V method cannot be used. I tried implementing it by creating a search help and then using it in the GET_DQUERY_VALUEHELPS method.But the problem when u use the search help is that all the values including the null values and duplicate entries will be populated when f4 is clicked.Is there any way to filter the values that get populated when f4 is clicked?If any other method can be used to implement the functionality please let me know..Thanks in advance....

    Hi,
    the GET_V methods worked for me most of the time. Even in advanced searchs. Only time they do not is if there is a different aproach considered in the GET_DQUERY_VALUEHELPS.
    As the GET_V_ you created obviously was called I suppose you found the correct place to Populate it to be used in the search.
    I do not know what the problem with the NULL values and duplicate entries is you talked about, but it sounds to me the creation of your valuehelp class is flawed. Not the integration into the UI.
    Maybe have a look at SAPs' standard implementations of Search Components. You should get a feeling for how search helps work. See. BT111S_OPPT, BP_HEAD_SEARCH
    cheers Carsten

  • Infoset Query- F4 help missing for few selection fields

    Dear Experts,
    While creating Infoset/ Quick view queries, I find few fields of the selection screen are not having F4 help.
    How this happens and How to correct this?
    Regards
    Jogeswara Rao

    Jogeswara Rao,
    In case when the reference table field doesn't contain a match code / Search help,You should be assign Match code object to the selection field while defining the same. When you define the selection criteria in the info sets, use the "Extras" field there to assign a specific match code for the work center object . (In your case MATCHCODE OBJECT CRAM. CRAM is the search help for work center field).
    Regards
    Narasimhan

  • One search help for multiple select-options in webdynpro abap

    Hi,
    I need a way to use one search help for multiple select-options fields. My scenario is :
    I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
    If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
    If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
    I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
    I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
    However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
    I think I won't be able to use this way. What do you say?
    As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
    MY TABLE (ZBYYT080) CONTENTS:
    SID     VARBL     VALUE     LANGU     VTEXT
    ADS     $WERKS     1     T     Werk 0001
    ADS     $WERKS     11     T     OZYAS  GIDA URETIM YERI
    ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
    ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
    AGT     $WERKS     2301     T     KAMLI DAMIZLIK
    AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
    ADS     $VKORG     22     T     AA KİMYASALLAR
    ADS     $VKORG     8001     T     İINSAAT BOYALARI
    AGT     $VKORG     6500     T     DAMk St.Org
    AGT     $VKORG     5400     T     PANAR St.Org.
    I wish I'm clear enough..
    I will be gald if someone answers me as soon as possible...
    Thanks İn advance..
    MERAL

    Hi,
    Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
    Am I right ?
    If Yes, then in the interface IF_WD_SELECT_OPTIONS
    method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
    have importing param like I_VALUE_HELP_TYPE and  I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
    etc which may help you to link your create DDIC Search help to selection screen params.
    this is just a clue from my side. I haven't tried it myself.
    You can go to the where used list of this method and find some sample implementations which use these params.
    Hope this helps.
    Regards
    Manas Dua

  • Selecting Field Values in a Structure

    Hi,
    I would like to seek help in selecting field values of structures.
    Here's the scenario. I am currently retrieving records and I need to filter the status.
    When I pressed F1 on the status field, the screen-field is VTGFHAPO-XBEWEBE.  VTGFHAPO is a structure. So, SQL statement is not possible.
    How do I filter the status of the record?
    For example, I will only retireve records with "OK".
    VTGFHAPO-XBEWEBE  = "OK".
    Thanks in advance for the replies.

    Goldust,
      VTBFHAPO---table
    this is added in structure VTGFHAPO field  "INCLUDE double click on it...
    Don't forget to reward if useful....

  • F4 help for only a single cell in a table

    Dear All,
    The requirement here is to provide input help for only a particular cell in a table.
    This cannot be achieved by assigning search help to the attribute of the context as this will render all the cells of that particular column with F4 help. I tried applying the cell variant concept but only go up to a certain extent.
    I tried OVS as well. But for this to work we need to lead select the entry and then go ahead with F4, which will make is inconvenient for the user.
    I even searched the forum for some answers, but i could only go to a certain extent with the help of those.
    So, if anyone out there has any idea, please help me out. Also, if this is a repeat post by any chance (i think not) kindly provide me with the link of the original.
    Thanks and Best Regards,
    Pramod

    I am running older versions, so i didn't find any sample dynpros..
    You can try with this peace of code..nyways..
    DATA: LR_TABLE TYPE REF TO CL_WD_TABLE.
    DATA: LR_COLUMNS TYPE CL_WD_table_column=>tt_table_column.
    DATA: LR_COLUMN TYPE REF TO CL_WD_TABLE_COLUMN.
    DATA: LR_EDITOR TYPE REF TO CL_WD_VIEW_ELEMENT.
    DATA: LR_TEXT   TYPE REF TO CL_WD_TEXT_VIEW.
    DATA: BINDING TYPE STRING.
    DATA: LR_CELL TYPE REF TO CL_WD_TABLE_STANDARD_CELL.
    IF FIRST_TIME EQ ABAP_TRUE.
      LR_TABLE ?= VIEW->GET_ELEMENT( 'TBL_COMPONENTS' ).
      LR_COLUMNS = LR_TABLE->GET_COLUMNS( ).
      LOOP AT LR_COLUMNS INTO LR_COLUMN.
        LR_EDITOR ?= LR_COLUMN->GET_TABLE_CELL_EDITOR( ).
        BINDING = LR_EDITOR->BOUND__PRIMARY_PROPERTY( ).
        IF BINDING EQ 'RRSO.SOCOMP.POSNR' OR
           BINDING EQ 'RRSO.SOCOMP.MATNR' OR
           BINDING EQ 'RRSO.SOCOMP.KWMENG' OR
           BINDING EQ 'RRSO.SOCOMP.NETPR' OR
           BINDING EQ 'RRSO.SOCOMP.POPRICE' OR
           BINDING EQ 'RRSO.SOCOMP.QUANTITY'.
           LR_CELL = CL_WD_TABLE_STANDARD_CELL=>NEW_TABLE_STANDARD_CELL( VIEW = VIEW
                                VARIANT_KEY = 'TOTAL' ).
           IF BINDING EQ 'RRSO.SOCOMP.QUANTITY'.
             LR_TEXT = CL_WD_TEXT_VIEW=>NEW_TEXT_VIEW( VIEW = VIEW
                                                       TEXT = 'Total'
                                                       H_ALIGN = CL_WD_TEXT_VIEW=>E_H_ALIGN-FORCED_RIGHT ).
           ELSE.
             LR_TEXT = CL_WD_TEXT_VIEW=>NEW_TEXT_VIEW( VIEW = VIEW ).
           ENDIF.
           LR_CELL->SET_EDITOR( LR_TEXT ).
        ENDIF.
         LR_COLUMN->ADD_CELL_VARIANT( LR_CELL ).
      ENDLOOP.
    ENDIF.
    This code is for setting Text View as cell editor, instead text view u can take input field and use bind_value method to bind with another context attribute.
    Abhi

  • Search Help for Infotype Custom Field

    Hi,
    I have created a search help for a custom field in an infotype. What would be the best way of filtering the help selection based on infotype values such as molga, begda, endda?
    Thanks in advance.
    /Elvez

    Hi Nishanth,
    thanks for your reply, perhaps I should clarify my question:
    1) I have a custom field in an infotype
    2) I have a table containing the search help information
    3) I assigned a search help to the custom field
    4) I have activated a search help exit
    The problem is that the information that I get from the custom field is not sufficient for making the selection. Therefore, I would like to somehow get hold of the addition information, such as BEGDA, ENNDA, MOLGA, to do a proper selection in the search help exit. How can I achieve that?
    I read something about function module DYNP_VALUES_READ -would it be possible to call this function module from my search help exit and thereby reach my goal?
    /Elvez
    Message was edited by: Elvez

  • BSP: F4 Help For a custom field...

    Hi All,
    I need to display search help for a custom field in one of my custom view.
    Search Help for the custom field is already implemented.. but how can i use it in BSP View!.
    In the standard CRM_IC application i couldn't find any similar search help scenario, coz it is calling some standard methods like ShowF4KeyAndValueHelp3,
    ICWCShowF4HelpExtern by passing the structure and field name!.
    I think these standard methods will work only with the fields which have value help table at the data element level. As the custom field that i m using does not have any value help i cant go for this method i guess!.
    Any Help/Hint?..
    Thank You,
    sudeep v d.

    Hello Sudeep,
    Here are some more helpful links .Please refer them .
    Re: Inputfield value for a tableView from a help window
    /people/thomas.jung3/blog/2005/08/22/bsp-value-input-help-popups-version-30
    F4 help using javascript
    Please let me know the feedback.
    Warm Regards,
    Rakesh Kumar Verma

  • F4 help for ALV table field

    Hi Experts,
    I need to implement F4 help for ALV table field.
    I my scenario, I am using two views. If we click on any record in fist view then it displays the popup window (second view) with relevant record details.
    Here one of the columns having fieldnames corresponding values (old values), for correcting old values I have created new value editable column, we can enter new value for old value then we can save it. Till this functionality is ok.
    Then I have included OVS help for new value field. Here I need to get f4 help for newvalue field relevant to fieldname.
    For example: user clicks on f4 in cell (new value) then if corresponding fieldname is u2018WERKSu2019 then it shows the plant values
    Here I can get fieldname, domain name  and value table using method set_attribute ().
    Same concept I have implemented in ALV using F4IF_FIELD_VALUE_REQUEST. It is working fine
    Here I have little bit confusion. Please advise me how to implement in OVS.
    Regards,
    BBC

    Hi,
    you'll have to create a method for the OVS search help (define it in the "OVS component usage" field in the context).
    Sample code (should work for WERKS):
    method on_ovs .
    declare data structures for the fields to be displayed and
    for the table columns of the selection list, if necessary
      types:
        begin of lty_stru_input,
      add fields for the display of your search input here
          WERKS TYPE WERKS,
        end of lty_stru_input.
      types:
        begin of lty_stru_list,
      add fields for the selection list here
          WERKS TYPE WERKS_D,
          NAME1 type NAME1,
        end of lty_stru_list.
      data: ls_search_input  type lty_stru_input,
            lt_select_list   type standard table of lty_stru_list,
            ls_text          type wdr_name_value,
            lt_label_texts   type wdr_name_value_list,
            lt_column_texts  type wdr_name_value_list,
            lv_window_title  type string,
            lv_group_header  type string,
            lv_table_header  type string,
            lv_werks type werks_d.
      field-symbols: <ls_query_params> type lty_stru_input,
                     <ls_selection>    type lty_stru_list.
      case ovs_callback_object->phase_indicator.
        when if_wd_ovs=>co_phase_0.  "configuration phase, may be omitted
      in this phase you have the possibility to define the texts,
      if you do not want to use the defaults (DDIC-texts)
    Set label from Medium Description to something more logical...
          ls_text-name = `NAME1`.  "must match a field in list structure
          ls_text-value = `Plant description`.
          insert ls_text into table lt_label_texts.
    Set col header from Medium Description to something more logical...
          ls_text-name = `NAME1`.  "must match a field in list structure
          ls_text-value = `Plant description`.
          insert ls_text into table lt_column_texts.
         lv_window_title = wd_assist->get_text( `003` ).
         lv_group_header = wd_assist->get_text( `004` ).
         lv_table_header = wd_assist->get_text( `005` ).
          ovs_callback_object->set_configuration(
                    label_texts  = lt_label_texts
                    column_texts = lt_column_texts
                    group_header = lv_group_header
                    window_title = lv_window_title
                    table_header = lv_table_header
                    col_count    = 2
                    row_count    = 20 ).
        when if_wd_ovs=>co_phase_1.  "set search structure and defaults
      In this phase you can set the structure and default values
      of the search structure. If this phase is omitted, the search
      fields will not be displayed, but the selection table is
      displayed directly.
      Read values of the original context (not necessary, but you
      may set these as the defaults). A reference to the context
      element is available in the callback object.
         ovs_callback_object->context_element->get_static_attributes(
             importing static_attributes = ls_search_input ).
        pass the values to the OVS component
         ovs_callback_object->set_input_structure(
             input = ls_search_input ).
        when if_wd_ovs=>co_phase_2.
      If phase 1 is implemented, use the field input for the
      selection of the table.
      If phase 1 is omitted, use values from your own context.
          if ovs_callback_object->query_parameters is not bound.
          endif.
          assign ovs_callback_object->query_parameters->*
                                  to <ls_query_params>.
          if not <ls_query_params> is assigned.
    TODO exception handling
          endif.
            call method ovs_callback_object->context_element->get_attribute
              exporting
                name  = 'WERKS'
              importing
                value = lv_werks.
            data: lv_subcat_text type rstxtmd.
            select werks
                   name1
              into table lt_select_list
              from T001W.
            ovs_callback_object->set_output_table( output = lt_select_list ).
        when if_wd_ovs=>co_phase_3.
      apply result
          if ovs_callback_object->selection is not bound.
          endif.
          assign ovs_callback_object->selection->* to <ls_selection>.
          if <ls_selection> is assigned.
            ovs_callback_object->context_element->set_attribute(
                                   name  = `WERKS`
                                   value = <ls_selection>-werks ).
          endif.
      endcase.
    endmethod.

  • How to add user defined F4 help for s LDB field?

    Hi,
         I am using PNPCE Logical Database for a program using the standard HR report category. But I want to have my own restricted F4 help for a particular field.Is it possible to override the standard LDB search help? I tried doing it , but I am getting a syntax error .
    Mahesh

    Hi Mahesh,
    I don't think so that you can attach a User defined F4 help in a standard LDB.
    What I would suggest is that you copy the standard LDB into Z LDB from SE80.
    Then go to the selection screen of the LDB and either try and attach a F4 help by writing the code in it OR
    Hide the field where you want to attach the F4 help with the keyword Exclude(you will have to check on the exact keyword).
    And add the same field in the selection screen of the report and define the F4 help.
    Do not forget to attach the Z LDB to your report by going to the Attributes.
    Please refer to the code below for attaching a generic F4 help to a select options:
    report zrich_0001 .
    data: begin of ihelp occurs 0,
    field type char10,
    ftext type char50,
    end of ihelp.
    data: a_field(20) type c.
    select-options s_field for a_field.
    initialization.
    ihelp-field = 'A'.
    ihelp-ftext = 'Description A'.
    append ihelp.
    ihelp-field = 'B'.
    ihelp-ftext = 'Description B'.
    append ihelp.
    ihelp-field = 'C'.
    ihelp-ftext = 'Description C'.
    append ihelp.
    at selection-screen on value-request for s_field-low.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
    retfield = 'FIELD'
    dynprofield = 'S_FIELD'
    dynpprog = sy-cprog
    dynpnr = sy-dynnr
    value_org = 'S'
    tables
    value_tab = ihelp.
    start-of-selection.
    In case you have any further clarifications,do let me know.
    Regards,
    Puneet Jhari.

Maybe you are looking for