F4 help for Selection fields in Infopackage not available

Hello Friends,
I have created a datasource in Bi7.0 .while creating this i have put selection option X(selection possible) and Selection option 3(EQ & BT) for the three characteristics in the datasource and activated it.
When i am creating the Infopackage for loading the data to PSA, with in infopackage in Data selection tab, when i am selecting the characteristic value for the above chars, the system says "Datasource does not exist in the source system of version A"
Why am i not able to select the values here?
Please let me know friends if you have any idea?
Thanks
mv_d

Hello Balakrishnachaitanya,
I am also trying to do the same, i am getting dynamic f4 help but when i try to select value from it, it doesnt appear in the UI...
Could you please tell me how to do it?
Thanks in advance,
Viral

Similar Messages

Freely Programed Help for select-option field

Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM

>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ?

How to get the F4 help for a field in the selection screen

Hi all,
I am working on a report program. In the selection screen, I have the field 'Brand Node ID'(ZNODEID). The requirement is to have the F4 help for this field. This field is available in a 'Z' table ZNODETAB. There is no Value table maintained for the corresponding data element. So, without disturbing the table data element/domain, I should get the F4 help in the selection screen of the report. In the F4 help, data should be fetched from the table ZNODETAB and the field is ZNODEID. Is there any way to do this.
By searching the function modules, I could find that, we can use the FM F4IF_INT_TABLE_VALUE_REQUEST. But, I am not Sure. Can someone tell me the parameters to be passed to this function module to get the F4 help and the procedure to follow. S_NODEID is the select option used in the program. Please help me in this regard. Thanks in advance.
Thanks & Regards,
Paddu.

look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING    p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZNODEID'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = p_field
      value           = space
      value_org       = 'S'
      display         = 'F'
    TABLES
      value_tab       = it_node
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
endform

Search help for A field in select option which doesnt have search help in c

u have table in QM which is QMFE in whihc field FECOD which doesnt have search help , but my requirement is that in select option in report to have users to see its search help, anyone there to help me

Hi sridhar loganathan,
For this goto SE11 and create a ZFECOD Search help for that field. In Defination Tab enter table name
QMFE and Enter Z_F4_FECOD_EXIT in Search help Exit.
Then create a FM in SE37 as Z_F4_FECOD_EXIT under a FG. And then write code as follows for example:
FUNCTION Z_F4_REG_EXIT.
""Local Interface:
*" TABLES
*"      SHLP_TAB TYPE SHLP_DESCR_TAB_T
*"      RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*"     VALUE(SHLP) TYPE SHLP_DESCR_T
*"     VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
TYPES: begin of ty_code,
          dam_code type QMFE-FECOD ,
        end of ty_code.
DATA : tw_code type ty_code,
         ta_code type table of ty_code.
   IF "callcontrol-step <> 'SELONE' AND
        callcontrol-step <> 'SELECT' AND
        callcontrol-step <> 'DISP'.
      EXIT.
    ENDIF.
   IF callcontrol-step = 'SELECT'.
      CALL FUNCTION 'F4UT_PARAMETER_ALLOCATE'
        EXPORTING
             PARAMETER         = 'FECOD'
        TABLES
             SHLP_TAB          = shlp_tab
             RECORD_TAB        = record_tab
        CHANGING
             SHLP              = shlp
             CALLCONTROL       = callcontrol
        EXCEPTIONS
             OTHERS            = 3.
   ENDIF.
   IF callcontrol-step = 'DISP'.
Get the Region
      CALL FUNCTION 'F4UT_PARAMETER_VALUE_GET'
         EXPORTING
              PARAMETER         = 'FECOD'
              FIELDNAME         = 'FECOD'
         TABLES
              SHLP_TAB          = shlp_tab
              RECORD_TAB        = record_tab
              RESULTS_TAB       = ta_code
         CHANGING
              SHLP              = shlp
              CALLCONTROL       = callcontrol
         EXCEPTIONS
              PARAMETER_UNKNOWN = 1
              OTHERS            = 2.
       IF SY-SUBRC = 0.
          SORT TA_CODE BY DAM_CODE.
Deleting duplicate damage codes in Internal Table ta_code
          DELETE ADJACENT DUPLICATES FROM TA_CODE COMPARING DAM_CODE.
Passing changed Internal table to FM
          CALL FUNCTION 'F4UT_PARAMETER_RESULTS_PUT'
          EXPORTING
             PARAMETER         = 'REGION'
             FIELDNAME         = 'REGION'
          TABLES
             SHLP_TAB          = shlp_tab
             RECORD_TAB        = record_tab
             SOURCE_TAB        = ta_code
          CHANGING
             SHLP              = shlp
             CALLCONTROL       = callcontrol
          EXCEPTIONS
             PARAMETER_UNKNOWN = 1
             OTHERS            = 2.
       ENDIF.
   ENDIF.
ENDFUNCTION.
Revert me for any clarifications.
Regards,
Suneel G.

Input help for AUART field on the selection screen

Hi,
I need to create a Z search help for the Field AUART ( sales document type ) .
The search help should be created in this way :
   i need to group these Document types under one name ( say SALO) ZCM1, ZCM2,ZDM1,ZDM2,ZRE1,ZRE2,ZS01,ZS02,ZS04.
Then i need to group these document types under another name ( say PRJO) ZCM3,ZDM3,ZS03.
Then i need to group both SALO and PRJO under one name 'BOTH'.
So my new search help will be SALO
                                             PRJO
                                             BOTH
If i select SALO , it should pull data from the Table for all the document types specified. Similarly for PRJO and BOTH .
Can anyone please advice me in this regard at the earliest
With Best Regards
Mamatha.

Hi Mamtha,
   Your Scenario can be achieved be defining Search help Exit available in the search Help creation Screen
Regards,
Kasi S

Add custom field in the F4 help for selecting source field in tcode FMDER

HI,
I an working in FUND MANAGEMENT, i want to add custom field in the F4 help for selecting source field in t-code FMDERIVE.
How this possible.
Regards,
Pankaj

OK

F4 help for a field in module pool

Hello Experts,
I need to provide f4 help on field sales office(VKBUR) in my module pool program.
I have searched forums about it. but all forum contains either doc. no or customers etc.
these field are directly available on table, so very easy to find.
But for sales office, how can i provide f4 help. there is no straight entries in tables like for this company code this sales office.
so its getting difficult for me to provide help.
so if anybody know the solution plz help, and if anyone know table where all sales offices are stored, i will be thankful.
Thanks,
Amar

Hi amar_war,
use screen painter to edit the screen layout where the field VKBUR is on. Double click the field to get the details screen. Here you can attach a search help to the field.
H_TVBUR has no more parameters, it will display a list of al sales offices with description text
H_TVBVK will also show the sales group, if VKGRP is a screen field, it will restrict the result list automatically on matching VKGRP.
H_TVKBZ has also VKORG VTWEG SPART - it will take those values from screen if filled.
If you are not satisfied with the results, you can easily create your own search help using own selection method and own search help exits if required.
Try standard search help for standard field first.
You can create a copy of VKBUR as ZVKBUR and attach search help there, you can create your own screen structure and attach the search help there - 50 ways to get your search help...
Regards,
Clemens

F4 help for a field in item table in a view cluster

Hi All,
I have a view cluster with two tables. I should provide F4 help for field in item table based on the selected row of the header table.
F4 should have only values fetched based on the header table entry.
How can i achieve this. Please suggest.
Regards,
Kusuma K.

Hi amar_war,
use screen painter to edit the screen layout where the field VKBUR is on. Double click the field to get the details screen. Here you can attach a search help to the field.
H_TVBUR has no more parameters, it will display a list of al sales offices with description text
H_TVBVK will also show the sales group, if VKGRP is a screen field, it will restrict the result list automatically on matching VKGRP.
H_TVKBZ has also VKORG VTWEG SPART - it will take those values from screen if filled.
If you are not satisfied with the results, you can easily create your own search help using own selection method and own search help exits if required.
Try standard search help for standard field first.
You can create a copy of VKBUR as ZVKBUR and attach search help there, you can create your own screen structure and attach the search help there - 50 ways to get your search help...
Regards,
Clemens

F4 help for input field

hi all
i am developing a z report.input field is customer name (ADRC-NAME1). SAP has not given F4 help on this field.
please tell mo how to give f4 Help for this field in report.
regard.
ulhas

hi..
do as below..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PR_VERSB.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
   EXPORTING
       TABNAME                   = 'MDPB'
       FIELDNAME                 = 'VERSB'
       SEARCHHELP                = 'H_T459V'
       DYNPPROG                  = 'ZPP_SHORT'
       DYNPNR                    = '1000'
       DYNPROFIELD               = 'PR_VERSB'
   EXCEPTIONS
       FIELD_NOT_FOUND           = 1
       NO_HELP_FOR_FIELD         = 2
       INCONSISTENT_HELP         = 3
       NO_VALUES_FOUND           = 4
       OTHERS                    = 5
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
Rahul

F4 HELP for the field

HI all,
in the report selection screen i have one field for which F4 HELP doesnt exits, even in the table for that field F4 HELP is not there but the user requests me to get the F4 HELP for that field in the selection screen .
please help how to get F4 HELP for the field
thanks in advance.

The following are the options for F4 help
Code:
PARAMETERS: p_ccgrp LIKE rkpln-ksgru. "Cost Center Group
*Input help for Cost Center Group
AT SELECTION-SCREEN ON VALUE-REQUEST   FOR p_ccgrp.
TYPES: BEGIN OF ty_ccenter_group,
setname TYPE setnamenew,
descript TYPE settext,
END OF ty_ccenter_group.
DATA: it_ccenter_group TYPE TABLE OF ty_ccenter_group.
CLEAR it_ccenter_group.
SELECT a~setname
b~descript
INTO TABLE it_ccenter_group
FROM setheader AS a INNER JOIN
setheadert AS b ON
asubclass EQ bsubclass AND
asetname EQ bsetname
WHERE a~setclass EQ '0101' AND
b~langu EQ sy-langu.
CALL FUNCTION
'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
ret field        = 'SETNAME'
dynpprog     = v_repid
dynpnr         =    SY-DYNR
dynprofield = 'P_CCGRP'
value_org    = 'S'
TABLES
value_tab   = it_ccenter_group.
F4IF_FIELD_VALUE_REQUEST:
This FM is used to display value help or input from ABAP dictionary. We have to pass the name of the structure or table (TABNAME) along with the field name (FIELDNAME). The selection can be returned to the specified screen field if three
parameters DYNPNR, DYNPPROG, DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
Getting F4 help based on other field .
Suppose if there are 2 fields on selection screen user name and Purchasing Document and the case is getting values of Purchasing Document Number based on user name
Code:
TYPES:   BEGIN OF ty_match_nast,
                objky TYPE na_objkey,
                END OF ty_match_nast.
Data: it_match_nast   TYPE STANDARD TABLE OF ty_match_nast.
Data: it_dypr_val   TYPE STANDARD TABLE OF dynpread.
DATA: wa_dypr_val TYPE dynpread.
DATA: it_return TYPE STANDARD TABLE OF ddshretval.
Case when only username value is entered.
       SELECT objky
        FROM   nast
        INTO TABLE it_match_nast
         WHERE kappl = c_ef
         AND   kschl = c_neu
         AND   usnam = wa_dypr_val-fieldvalue.
      ENDIF.
*Read User name on selection screen field value
CLEAR wa_dypr_val.
REFRESH it_dypr_val.
wa_dypr_val-fieldname = 'P_UNAME'.      "User name
APPEND wa_dypr_val TO it_dypr_val.
*FM to get the value
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname             = sy-repid
      dynumb             = sy-dynnr
      translate_to_upper = 'X'
    TABLES
      dynpfields         = it_dypr_val_h.
*Pass the values to f4 table
   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield     = u2018OBJKY'
        dynpprog    = sy-repid
        dynpnr      = sy-dynnr
        dynprofield = 'P_EBELN'
        value_org   = 'P'
     TABLES
        value_tab   = it_match_nast
        return_tab = it_return.

How to provide F4 help for a field in table control

Hi Friends,
I have requirement like below.
1.Create one custom transaction code with header and item information.
2.In item level, we will be designed table control to enter/display the data.
3.Table controls first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
4.First user will enter material number in the table controls first rows first field and go to DOT number field.
5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
But for point number 5, business wants like when ever user enters material number in table control first field then select DOT numbers drop down then they want to see the particular materials DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
Please see below example.
Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT numbers drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
Could you please suggest me, how can we achieve this?

Hello,
Check this :-
For POV
Input Help in Dialog Modules
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT DEMO_DYNPRO_F4_HELP_MODULE.
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
CALL SCREEN 100.
MODULE INIT OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE VALUE_CARRIER INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'DEMOF4HELP'
FIELDNAME = 'CARRIER1'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'.
ENDMODULE.
MODULE VALUE_CONNECTION INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = PROGNAME
DYNUMB = DYNNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT CARRID CONNID
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE CARRID = FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CONNID'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CONNECTION'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
MODULE INIT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON VALUE-REQUEST.
FIELD CARRIER MODULE VALUE_CARRIER.
FIELD CONNECTION MODULE VALUE_CONNECTION.
When the user chooses input help for the individual fields, the following is displayed:
For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The users selection is returned to the screen field CARRIER.
For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the users selection into the screen field CONNECTION.
For POH------------
Field Help
There are three ways of displaying field help for screen elements:
Data Element Documentation
If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
For further information about creating data element documentation, refer to data elements.
Data Element Supplement Documentation
If the data element documentation is insufficient, you can expand it by writing a data element supplement
Data element supplement documentation contains the heading Definition, as well as the following others:
Use
Procedure
Examples
Dependencies
To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
For further information about data element supplement documentation, refer to Data Element Supplements.
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
The next screen (statically defined) for screen 100 is 100. It has the following layout:
The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON HELP-REQUEST.
FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
FIELD FIELD3 MODULE F1_HELP_FIELD3.
FIELD FIELD4 MODULE F1_HELP_FIELD4.
The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
The following field help is displayed:
When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
Regards,
Deepu.K

Search Help for a Field of a Table Control

I have designed a screen using 'Table Control' with fields like Date, BoxNo,Quantity etc. Kindly tell me how to go about providing a search help for the field 'BoxNo' of this table control so that the user is not required to scroll down the entire table/list for selecting a particular box no.
Thanx in advance,
Alok.

When you go to screen painer, in screen painter attributes window, there is an atribute called search help, fill it.
Another way is, after PAI put:
PROCESS ON VALUE-REQUEST.
FIELD box_no MODULE f1_help_box_no.
And gives logic in that module using FM F4IF_INT_TABLE_VALUE_REQUEST.
Regards.

How to create Search Help for a field in Table control !!

Hello Friends,
              I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
Senthil

Check the sample code:
*& Include           ZSRO_MPRN_SEARCH                                 *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
        stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl     = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = c_x
      determine_loop_index = c_x
    TABLES
      dynpfields           = lt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
    MOVE lt_dynpfields-fieldvalue TO ws_outcode.
    ws_len = STRLEN( lt_dynpfields-fieldvalue ).
    IF ws_len GE 7.
      ws_len = ws_len - 3.
     ws_icode = ws_code+ws_len(3).
      lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
      CONCATENATE lt_dynpfields-fieldvalue '%'
          INTO ws_outcode.
      CONDENSE lt_dynpfields-fieldvalue.
   REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
    ELSE.
      CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
        INTO ws_outcode.
    ENDIF.
   ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl     = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = lt_dnpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode.
    ELSE.
MPRN blank and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1.
    ENDIF.
ELSE.
MPRN exist and Post code exist
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode AND
                   mprn EQ lt_dnpfields-fieldvalue.
    ELSE.
MPRN exist and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE mprn EQ lt_dnpfields-fieldvalue.
    ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MPRN'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select MPRN'
      value_org       = 'S'
    TABLES
      value_tab       = i_mprn1 "lt_mprn
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
    IF sy-subrc EQ 0.
Updating post code
      CONCATENATE i_mprn1-outcode i_mprn1-incode
                    INTO ws_postcode
                         SEPARATED BY space.
      MOVE ws_postcode TO i_mprn-post_code.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
      ws_dynpfld-fieldvalue = ws_postcode .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
Updating MPRN
      MOVE i_mprn1-mprn TO i_mprn-mprn.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-MPRN'.
      ws_dynpfld-fieldvalue = i_mprn1-mprn .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ELSEIF sy-subrc EQ 2.
    MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE.                    "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
       stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl     = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = c_x
      determine_loop_index = c_x
    TABLES
      dynpfields           = lt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
    MOVE lt_dynpfields-fieldvalue TO ws_outcode.
    ws_len = STRLEN( lt_dynpfields-fieldvalue ).
    IF ws_len GE 7.
      ws_len = ws_len - 3.
     ws_icode = ws_code+ws_len(3).
      lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
      CONCATENATE lt_dynpfields-fieldvalue '%'
          INTO ws_outcode.
      CONDENSE lt_dynpfields-fieldvalue.
   REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
    ELSE.
      CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
        INTO ws_outcode.
    ENDIF.
   ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl     = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = lt_dnpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode.
    ELSE.
MPRN blank and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1.
    ENDIF.
ELSE.
MPRN exist and Post code exist
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode AND
                   mprn EQ lt_dnpfields-fieldvalue.
    ELSE.
MPRN exist and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE mprn EQ lt_dnpfields-fieldvalue.
    ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MPRN'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select MPRN'
      value_org       = 'S'
    TABLES
      value_tab       = i_mprn1 "lt_mprn
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
    IF sy-subrc EQ 0.
Updating MPRN
      MOVE i_mprn1-mprn TO i_mprn-mprn.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-MPRN'.
      ws_dynpfld-fieldvalue = i_mprn1-mprn .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
     ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
Updating post code
      CONCATENATE i_mprn1-outcode i_mprn1-incode
                    INTO ws_postcode
                         SEPARATED BY space.
      MOVE ws_postcode TO i_mprn-post_code.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
      ws_dynpfld-fieldvalue = ws_postcode .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
     break gblap0.
     ws_dynpfld-stepl = mprn-current_line.
     LOOP AT i_mprn.
       MOVE i_mprn1-mprn TO i_mprn-mprn.
       MOVE ws_postcode TO i_mprn-post_code.
       MODIFY i_mprn INDEX
                mprn-current_line." transporting MPRN POST_CODE.
     ENDLOOP.
**code changed by laxman 10.08.2005
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ELSEIF sy-subrc EQ 2.
    MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE.                    "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
          gntc LIKE iflot-zzgntc,
        END OF lt_gntc.
CLEAR:   lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZZGNTC'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select Gas Nomination Type Code'
      value_org       = 'S'
    TABLES
      value_tab       = lt_gntc
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE.                    "GNTC_F4 INPUT
*&      Module mprn1_f4 INPUT
      text
MODULE mprn1_f4 INPUT.
DATA: lt_f4          TYPE ddshretval OCCURS 0 WITH HEADER LINE,
        lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
        lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
        lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
        stepl_index1 TYPE systepl.
DATA : i_dnpfld1      LIKE dynpread OCCURS 0 WITH HEADER LINE,
         ws_dyname1     LIKE d020s-prog,
         ws_dynumb1     LIKE d020s-dnum,
         ws_dynpfld1    LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
         lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
         stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl     = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
      determine_loop_index = 'X'
    TABLES
      dynpfields           = lt_dynpfields1
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'IFLOT'
      fieldname         = 'I_MPRN-MPRN'
      searchhelp        = 'ZS_MPRN_PC'
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
    TABLES
      return_tab        = lt_f4
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-mprn.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
    ws_dynpfld1-fieldvalue = i_mprn-mprn.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-post_code.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
    ws_dynpfld1-fieldvalue = i_mprn-post_code.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDMODULE.                 " mprn1_f4 INPUT
*&      Module pstlz1_f4 INPUT
      text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
          lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
          stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl     = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
      determine_loop_index = 'X'
    TABLES
      dynpfields           = lt_dynpfields1
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'IFLOT'
      fieldname         = 'I_MPRN-POST_CODE'
      searchhelp        = 'ZS_MPRN_PC'
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
    TABLES
      return_tab        = lt_f4
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-post_code.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
    ws_dynpfld1-fieldvalue = i_mprn-post_code.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-mprn.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
    ws_dynpfld1-fieldvalue = i_mprn-mprn.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDMODULE.                 " pstlz1_f4 INPUT
Regards,
Prakash.

Search help for a field in a web dynpro app

Hi All,
I have a web dybpro application where I need to add a field on the selection screen, the field that I need to add is USR02-BNAME. I have added the required field on the screen but now I need to have a F4 help for the same but when I looked US02 the search help is not defined, can you please tell me how can get this.
Thanks

Raja,
If your attribute( selection field) is of type any dataelement and if corresponding domain has values then those values will appear in F4 help.
Or in se11 create one search help for that field.automatically it will reflect in apps.
Or Use OVS( Object value selector) , its a kind of advance search help...
Regards
Srinivas

Search help for a field in ztable

Good day everyone!
I want to create a search help for a field. I have a field 'country' in my Ztable. Now I want to create a search help for that field so that they appear in the SM30 transaction while entering the data into the table. How can I do that?
thanks.

First of all if the field is country and you want to display all the countries avaiable in SAP in the search help then yuo dont need to create search help for that. For that field put the data element LAND1. The F4 help will automatically appear in SM30 and when you press F4 all the countries will be displayed in the hit list.
Now suppose there is a case where you want to display selected values only and not all the countries in your search help then one way is to create a z-table of countries and put all the countries you want in that table then create z-data element and z-domain for that country field and in domain give the table as a value table.
Another way is to create a view for T005 and T005T table and give the selection conditions as per your requirement and then create the search help with this view and attache the search help to your country field.

F4 help for Selection fields in Infopackage not available

Similar Messages

Maybe you are looking for