F4 Help for standard selection field of tcode F-02 for the field of xblnr

Hi Experts..........!
I need F4 help fo the field of bkpf-xblnr in that selection screen of tcode F-02  .
please help me....!
Regards ,
vamsi

Hi,
Go for Implicit enhancement...Pls go the link..
Re: Executing a Planning Enhancement in Debug

Similar Messages

  • Changing field label for standard select option

    Hi All,
    I need to change the label for one of the standard select option for the custom report category.
    the field is PNPSTAT1 - original label is - Customer-Specific Status - which i need to change as per customer requirement.
    Can anyone tell me the way i can do it so that it can be viewed with correct label not only on the selection screen but in further selections mode as well.
    Regards,
    Raunak

    Dear Raunak,
    If you have standard select option for standard selection screen:
    create a implicit enhancement for any standard program and wrote the below code at the end of the program and it is working..
    INITIALIZATION.
    %_s_PNPSTAT1%_app_%-text = 'ANY LABEL'.
    If you have custom report select option, go to above Ravikiran's procedure.
    Best of luck.
    Regards,
    Abbas.

  • The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

    The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

    Hold down shift as you right-click > Get Info to get the old style dialog box.
    tt2

  • Client would like the monetary fields to reflect . and not , in the fields.

    Client would like the monetary fields to reflect . and not , in the fields. There are commas and he wants decimals.
    can any one help me out, this is a tkt  can any one suggest me how do we take it further.

    Hi Jai Ram,
    Ask the user to go to SU3 tcode. Then go to defaults tab. There is a field called Decimal Notation. There are three formats as below
    1.234.456,789
    1,234,456.789
    1 234 456,789
    Select accordingly. Then quit SAP and relogin. The changes will be applied.
    Kind Regards
    sandeep

  • Field catalog does not agree with the fields of the functional area

    G'day everyone,
    I am using a generic extractor via infoset to extract data from R/3 source system.
    Using RSA3, I have obtained an error message and no further details.
    ****ERROR MESSAGE
    "Field catalog does not agree with the fields of the functional area
    Message no. RSUQ134
    ****ERROR MESSAGE
    I have checked and adjusted my infoset in SQ02 and they seems fine but still obtain the same error.
    In BW, replicated the datasource and activate the transfer rules but still obtain the same error.
    Anyone knows how to get more details for this type of error? Or how to fix this problem?
    Regards
    Wayne

    I think I have just solved it.
    Transaction RS02 delete and recreate after checking the structure in BW and Source system are the same.
    Cheers

  • Project system: CJE2 tcode.. Add the field to selction screen

    Hi,
    GM ALL
    I would like to add the field to selection screen for a dynamic report one which is using in CJE2 T.CODE. I am trying to add the field through se36 [logical data base level] but its not helping.
    Need to add below field to selection-screen
    CJDB_SELIDS
    Field:  SELID_PR
    Please let me know,if any one know the solution..
    Regards
    KK
    Edited by: kirankumar2129 on Oct 18, 2011 10:03 AM

    You need to have the SAP access key to modify the screen and add the field which already been added in VBAP using the Append structure in SE11
    Thanks,
    Babu Kilari

  • KOMK Field is not showing up in the field catalog for creating cond.  tab

    Hi Guys,
                 I add a new field in KOMK table.
    Its showing up in the Field catalog but when I create a condition table, its not showing up in that catalog to choose.
    Thank U for Ur time.
    Cheers
    S Kumar

    Hi,
    Perhaps you have checked it. Do you check if in SM30 for view VV_T681F_VA you have this field?
    Regards,
    Eduardo

  • How to compare two currency form fields and display a message if the fields do not equal?

    My form has 2 fields named Total_1 and Total_2. If one of the fields does not equal the other, a hidden field will display a message in red on the form alerting the user. Otherwise, the message does not display. Looks like a validation script but I would greatly appreciate help in getting it started. Any ideas?
    Thanks, Charlie
    charlie6067

    Since the field values that you want to compare are the results of calculations, you should not normally compare their string values, but rather their numeric values when rounded appropriately (and perhaps then converted to a string). For example, if you have two values that display as 3.14, one could be 3.1400000001 and the other could be 3.13999999999991234. When you get the field values as strings and compare them, they won't be equal though they appear to be. Even some values that are numerically identical won't be equal when compared as strings ("0.0" != "0.00") So the code could be changed to:
    // Get the two field values, rounded to two decimals
    var v1 = util.printf("%.2f", getField("Total_1").value);
    var v2 = util.printf("%.2f", getField("Total_2").value);
    // Hide/Show the error message
    event.value = (v1 === v2 || (+v1 === 0 && +v2 === 0)) ? "" : "Error message here.";

  • Update a field multiple times, but only if the field is empty

    I am having trouble updating a field in my table based upon a set of 7 different rules. I have been scratching my head at this for a few days, and am not sure what exactly is wrong, but am sure there is something small causing me problems. My current code
    is:
    BEGIN TRANSACTION
    UPDATE MyTable
    SET Field1 = 'Value1'
    WHERE svc = 'Y' AND Field1 = '' ;
    COMMIT TRANSACTION
    BEGIN TRANSACTION
    UPDATE MyTable
    SET Field1 = 'Value2'
    WHERE Dlv Is Null AND Cat = 'svc' AND Field1 = '';
    COMMIT TRANSACTION
    BEGIN TRANSACTION
    UPDATE MyTable
    SET Field1 = 'Value2'
    WHERE (prod LIKE 'ABC%') OR (prod LIKE 'ABB%') AND Field1 = '';
    COMMIT TRANSACTION
    BEGIN TRANSACTION
    UPDATE MyTable
    SET Field1 = 'Value3'
    WHERE Dlv = 'Elec' AND Field1 = '';
    COMMIT TRANSACTION
    BEGIN TRANSACTION
    UPDATE MyTable
    SET Field1 = 'Value4'
    WHERE Ord = '0' AND Cat = 'Hdw' OR Cat = 'Bnd' AND Field1 = '';
    COMMIT TRANSACTION
    BEGIN TRANSACTION
    UPDATE MyTable
    SET Field1 = 'Value5'
    WHERE Ord = '0' AND (NOT (Cat = 'Hdw')) AND (NOT (Cat = 'Bnd')) AND Field1 = '';
    COMMIT TRANSACTION
    BEGIN TRANSACTION
    UPDATE MyTable
    SET Field1 = 'Value4'
    WHERE (Ind = '1' AND Cat = 'Hdw') OR (Cat = 'Bnd') AND Field1 = '';
    COMMIT TRANSACTION
    BEGIN TRANSACTION
    UPDATE MyTable
    SET Field1 = 'Value5'
    WHERE (Ind = '1' AND NOT (Cat = 'Hdw')) AND (NOT (Cat = 'Bnd')) AND Field1 = '';
    COMMIT TRANSACTION
    BEGIN TRANSACTION
    UPDATE MyTable
    SET Field1 = 'Value6'
    WHERE Ind = '0' AND Cat = 'Hdw' OR Cat = 'Bnd' AND Field1 = '';
    COMMIT TRANSACTION
    BEGIN TRANSACTION
    UPDATE MyTable
    SET Field1 = 'Value7'
    WHERE (Ind = '0' AND NOT (Cat = 'Hdw')) AND (NOT (Cat = 'Bnd')) AND Field1 = '';
    COMMIT TRANSACTION
    My biggest problem seems to be that between the piece that updates Field1 as either Value4 or Value5 is that something is not right. I initially had this set up in MS Access, and so am using that as a comparison
    to check my final values once the field has been udpated. When I run in Access I get a total of 9,802 for Value6 and 14,107 for Value4, yet when I run the SQL code I get 19,548 for Value 6 and 4,478 for Value4.
    I also get some differences for the other values, but nowhere near as large of a difference as with the 2 values above. I feel fairly confident that I have something not quite right with my syntax, but I cannot
    figure out exactly what it is. Field1 at the beginning of the query is inserted into the table as a blank value.
    Thanks.

    Combining OR and AND may be tricky, so I think your problem lies here:
    UPDATE MyTable
    SET Field1 = 'Value4'
    WHERE Ord = '0' AND Cat = 'Hdw' OR Cat = 'Bnd' AND Field1 = '';
    You can change this to
    UPDATE MyTable
    SET Field1 = 'Value4'
    WHERE (Ord ='0' AND Cat IN ('Hdw','Bnd')) AND Field1 = '';
    For every expert, there is an equal and opposite expert. - Becker's Law
    My blog
    My TechNet articles

  • At selection-screen. - message - go back to the field on selection-screen

    At selection-screen.
    If the user enter the wrong profitcenter .
    just  I  need to issue a  message saying the user to "enter the correct profit center "
    and cursor should go back to the profit center field on the selection screen.
    How to code this ?

    Hello Sam
    Here a more detail code sample:
    *& Report  ZUS_SDN_RETURN_TO_SELSCREEN
    REPORT  zus_sdn_return_to_selscreen.
    PARAMETERS:
      p_bukrs    TYPE bukrs  DEFAULT '1000'.
    SELECTION-SCREEN BEGIN OF BLOCK profit WITH FRAME TITLE text-bl1.
    *                                  text-bl1 = 'Profit Center Selection'
    PARAMETERS:
      p_prctr    TYPE prctr  OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK profit.
    AT SELECTION-SCREEN ON BLOCK profit.
      IF ( p_prctr BETWEEN '0000001000'  AND '0000002000' ).
      ELSE.
    *   IF condition only used to trigger either error message
        IF ( p_prctr BETWEEN '0000002001' AND '0000003000' ).
          MESSAGE 'Invalid profit center' TYPE 'E'.
        ELSE.
    *     or
          MESSAGE e398(00) WITH 'Profit Center' p_prctr 'invalid' .
        ENDIF.
      ENDIF.
    START-OF-SELECTION.
    * do something...
    END-OF-SELECTION.
    Regards
      Uwe

  • Translation of the Field label that is passe in the field catalog on ALV

    Hiii
    i there a way to make ALV column field label in different language
    let say i have 3 radio button language english , french , and dutch
    depending on the radio button selected i want my alv column fields to be display in that language.
    note i am using field catalog merge and alv list.
    i know that can be done by forcing value in the fieldcat-fieldname
    something like that
    IF english
    fieldcat-fieldname = English
    If frence
    fieldcat-fieldname = french
    if dutch
    fieldcat-fieldname = dutch
    but suppose i have 50 field then i must do that with all 50 field for each language
    i there some more easier way like setting sy-langu or setting language in the fieldcat

    Hi newbie82 c,
    the easiest way is to use the SAP logon language and have all texts in program defines as text fields. The text fields are translated once and fetched always correct according to logon language.
    If you want to switch languages by radiobutton, you may define one create_fieldcat routine for each language.
    Regards,
    Clemens

  • After add a field catalog,how can I post the field value to IPC??

    Hi,experts,I've created a field catalog "ZPRD_CHANGED"(I  ZPRD_CHANGED D D ZCHG_FLAG(CHAR1))in IMG pricing,and also assigned the value to it
    in method "ITEM_COMMUNICATION_STRUCTURE" in mplementation  "ZCRM_COND_COM_BADI" of BADI "CRM_COND_COM_BADI".
    LIke this:
    DATA: lr_obj type ref to ZL_BT115IT__ITEMS_CN00.
      create object lr_obj.
      CS_ACS_I_COM-ZPRD_CHANGED = lr_obj->zprd_chg_flg.
    After that,in the java codings of user exit in IPC,I add below codings:
    public BigDecimal overwriteConditionValue(
         IPricingItemUserExit pricingItem,
         IPricingConditionUserExit pricingCondition)
      String prodchanged = pricingItem.getAttributeValue("ZPRD_CHANGED");
    But it seems that it doesn't work,variable "productchanged" can not get the value posted from method "ITEM_COMMUNICATION_STRUCTURE" in mplementation  "ZCRM_COND_COM_BADI".
    What's the problem?Can anybody suggest??
    Thanks in advance.
    Jerry.

    Hi Jerry,
    did you register the attribute in the customizing for the user exits? Transaction /SAPCND/UEASS. You need to register the attribute on Implementations and Formula level.
    Best Regards,
    Michael
    P.S. Guess you are already aware of the userexit guide attached to note 809820.

  • Field validation with cursor returning on the field in error.

    Hi,
    Is there a way to return the cursor to a specific INPUT field on an alv grid after a validation return an error on it?
    Thanks.

    Hi,
    Try using the method SET_CURRENT_CELL_VIA_ID..
    Please check this thread..
    Re: Can we scroll to the last page of an alv grid?
    Thanks
    Naren

  • Text field with promp msg only when the field is empty

    I want to make a TextField with prompt message but The problem with google code was that the prompt msg is shown only when The textField is not clicked, I want to show the prompt msg even when the text field is clicked,when I type a letter inside the textField it vanishes and when i delete all of it, I'll see the prompt msg again and I want to Load the cursur at the text field when the page is loaded, How can I achieve that?

    Not working!
    One new problem I have confronted, I have edited the htm file with the previously mentioned code, yet, when i started flex again, the code was not there?
    Is it a derived file?
    If so how can I make permanent changes there?
    i used the code:     
    private function onLoad(event:Event):void
                 focusManager.setFocus(this.textId);           
    As using
    private function onLoad(event:Event):void
    shows the red cross i.e. error at a particular step at the
    <mx:Application.......
    and the error shows as
    Incorrect numbers of arguments. Expected 1.
    I guess its a very simple problem yet I don't know why I am getting so complex.
    I have faced certainly a nice problem, it sometimes works and sometimes doesnt,
    when I run from the flex bulider it works, If I click on the html file it doesn't.. It may happen it wont work again in future.

  • Customer message for  Standard Infotype 0050 field Standard overtime

    Hi Guyz,
    For the Infotype 0050 field Standard Overtime(ZMGEN) , I need to restict with values Y or N. Otherwise Error 'Invalid Code entered' should be displayed.
    How do I approach ?
    Thanks and Regards,
    Venkat.O

    The best option might be to create a field exit. Use report RSMODPRF to create field exit for Data Element DZMGEN. The report has a good help document, but it's pretty easy to set up the field exit.

Maybe you are looking for