F4 help for standard UI elements
Experts,
In standard Web Dynpro applicaiton, we have a field, that needs to be enabled for search help. I have enhanced the component and enabled search help for that.
My requirement is, when I select F4 for that perticular field, selection dialog appears and when I click on search after giving search criteria, its displaying all the possible values, and when I select one value among them, it should update the field on which F4 was done and other related fields also.
Webdynpro component : /SAPSRM/WDC_UI_DO_SHIPTO
Window : IV_L_FPC_CA_DETAILS
View : V_DODC_SHIPTO
Field : NAME_2
Along with NAME_2, I want the other fields also should get updated.
PS: right now, I could see only one field is getting updated, the rest of them are not.
How can i achieve this functionality.
Thanks
SR
Hi SR,
You have to implement OVS help. Based on ovs selection you want to update values in other fields F4 help right?
For this you have to write code accordingly in OVS.
Cheers,
Kris.
Similar Messages
-
How to change search help for standard field in me51n.
hi frnds,
I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
best regards,
sudip biswasHi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable. -
How to add search help for standard field LIKP-TRAID
Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
AbhiHi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable. -
F4 HELP for standard field..
i want to put F4 help for standard field FERTH in mm01 and mm02 ...
is there any way to put F4 help for this field..try this
1. First go to SE11 and create your own search help( if you dont know how to create a search help please feel free to ask me, it is very easy).
2. Now in your module pool program program go to the layout of your screen.
3. Now when you see the attributes of this field in the Dict tab you will find the field Search Help. Now here you can specify the name of the search help you created in SE11.
There is also another mehtod to create the dynamic search help. eg:- in a posted document data get the Document nos related to that company code.
The sample code is like this:-
First of all declare the module below in the flow logic of your screen then create it in your main program.
You declare the module in the PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD TXT_DOCNO MODULE VALUE_BELNR.
You also need to create an internal table where you wil store results of the select query fired below in the module.
here you will get a F4 help on the filed Document Number(TXT_DOCNO) based on the field Company code (TXT_CODCO)
MODULE VALUE_BELNR INPUT.
progname = sy-repid.
dynnum = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'TXT_CODCO'.
APPEND field_value TO dynpro_values.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'BKPF'
fieldname = 'BUKRS'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'TXT_CODCO'.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = progname
dynumb = dynnum
translate_to_upper = 'X'
TABLES
dynpfields = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT BUKRS BELNR
FROM BKPF
INTO CORRESPONDING FIELDS OF TABLE it_doc1
WHERE BUKRS = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BELNR'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'TXT_BELNR'
value_org = 'S'
TABLES
value_tab = it_doc1.
ENDMODULE. " VALUE_BELNR INPUT -
How to get F4 help for Standard Text Key of a operation based on Order type
Hi Experts,
How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
Thanks in Advance.
Regads,
BujjiHi Guys,
Any help on this...
Regards,
Bujji
Edited by: Bujji on Dec 22, 2008 12:42 PM
Edited by: Bujji on Jan 5, 2009 2:00 PM -
How to create an search help for standard Screen
Hi,
Can any one help me out ... How to create a search help for standard screen field.......
thanks & regards,
Naveen...Hi Naveen.
I would like to suggest a couple of references,
[SDN - Standard Reference for create a search help for own fields in selection screen |How to create a search help for my own fields in selection screen;
[SDN - Standard Reference for Attaching search help to standard screen|Attach search help to standard screen;
[SDN - Reference for want to add a field in standard search help screen|want to add a field in standard search help screen;
[SDN - Reference for Attaching a search help to a standard screen - Case 2 |attaching a search help to a standard screen;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave -
FM for standard WBS element change - CJ92
Hi all,
Is there any function module to make changes in standars WBS element/proj.def tocde- CJ92.
If any knows, please provide me the same.
Thanks much!
Chandra.
Edited by: Sekhar on Apr 7, 2010 1:10 PMThanks... Is this work for standard WBS elements ?
-
SEARCH HELP FOR STANDARD SAP DATA ELEMENT AFNAM
Hello All,
Is there any possibility for adding a search help for the standard SAP field AFNAM.
Thanks in Advance!
AshishHi Ashish,
You can APPEND your own search help to an SAP field that has search help defined. This is similar to APPENDing fields to an SAP table.
You can also attach the search help to a field on a screen, i.e. limit the scope to that single screen, but this would still require a modification to the system, and hence, an access key.
Hence if you want to attach search help to the standard SAP field, then you will need access key for that.
If the access key will be available then you can attach your search help to the standard SAP field.
For more reference go through the link :
http://help.sap.com/erp2005_ehp_04/helpdata/EN/3d/e53642e2a3ab04e10000000a1550b0/frameset.htm
Thanks,
Nitesh Jain -
Custom seach help for standard field in Web dynpro application
Hi All,
I have a requirement in SRM portal where in I have a to add a custom search help to the 'WBS_ELEMENT' field in the the 'ACCOUNT ASSIGNMENT' tab of the Shopping cart creation screen with some input parameters on the search help.
As the SRM Shopping cartcreation screen is a standard web dynpro application.
Can anyone help me in this regard for addition of search help for a field with some custom fields in the Search help screen.
Any inputs will be very helpful.
Thanks in advance.
Regards,
Ahmed.Hi Ahmed,
If it is an standard application then you will have to do ENHANCEMENT in the component. And for using customised value help you will have to declare attribute in CONTEXT and dynamically change the binding of the Value property of UI element inside post-method of WDDOMODIFY. You can create your own customised value help for newly added attribute.
Thanks,
Vishesh -
Need some help in creating Search Help for standard screen/field
I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewardedHi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh -
Search Help for standard field in WEB GUI
Hello Experts
There are F4 help for Business Partners (street and district that are standard address fields) and it is visible from SAP GUI. However in WEB UI there are no input help (although they are standard) for these fields.
Is there customizing step for it or do we need to write some codes (get_v, get_p methods) in order to get F4 help.
Thanks in advance,
ErkanTry creating design layer in SPRO>CRM>UI FRAMEWORK>UI FRAMEWORK DEFINITION>MAINTAIN DESIGN LAYERS
Enter component for business partner and define new design layer. To this layer assign a field by which you want to search.
Then go to SPRO>CRM>UI FRAMEWORK>UI FRAMEWORK DEFINITION>CONFIGURE USER INTERFACE. Again enter the same component and go to the relevant context node and then field. Then assign to that field newly created design layer.
Info about components, context nodes and fields you get by pressing F2 on thous 2 fields in WEB UI. -
Hi folks,
I have to keep F4 help for field 'Goods Receipt' in the stnadard TCode MIGO. Do we need to use any Exit or is there any other way to do so like configuration settings in SPRO...Pls suggest me how can i acheive that one..
Thanks,
Shyam.Hi Shyam,
you have to do from the EXIT only
Enhancement/ Business Add-in Description
Enhancement
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0011 Read from RESB and RKPF for print list in MB26
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009 Filling the storage location field
MBCF0007 Customer function exit: Updating a reservation
MBCF0006 Customer function for WBS element
MBCF0005 Material document item for goods receipt/issue slip
MBCF0002 Customer function exit: Segment text in material doc. item
Business Add-in
MB_DOCUMENT_UPDATE BADI when updating material document: MSEG and MKPF
MB_DOC_BADI_INTERNAL BAdIs During Creation of a Material Document (SAP Internal)
MB_ME_CSGMT_BADI_SAP BAdI: Consignment Processing - Stock Transfer
MB_MIGO_ITEM_BADI BAdI in MIGO for Changing Item Data
MB_PHYSINV_INTERNAL Connection: Core Inventory and Retail AddOn
MB_QUAN_CHECK_BADI BAdI: Item Data at Time of Quantity Check
MB_RESERVATION_BADI MB21/MB22: Check and Complete Dialog Data
MB_RESERVATION_SCR Screen BAdI for Retrofit DFPS
MB_RESERVATION_UPCHD BAdI for Creation and Changing of Manual Reservations
MB_RES_BAPI_CHANGE BAdI: Execution of Changes to Reservation Fields
MB_RES_BAPI_CREATE1 BAdI: Adoption of Customer's Own Fields as Reserv. Fields
MB_RES_BAPI_DETAIL1 BAdI: Display of Customer's Own Fields in Reservations
MB_STOR_LOC_BADI_GTS BADI to Check and Change Storage Location (GTS Fct. Only)
MB_MIGO_BADI BAdI in MIGO for External Detail Subscreens
MB_DOCUMENT_BADI_SAP BADI for Creation and Changing of a Material Document
ARC_MM_EBAN_CHECK BAdI: Enhancement of Archivability Check (MM_EBAN)
ARC_MM_EBAN_PRECHECK BAdI: Enhancement of Archivability Check (MM_EBAN)
ARC_MM_EBAN_WRITE BAdI: Enhancement of Scope of Archiving (MM_EBAN)
ARC_MM_EINA_CHECK BAdI: Enhancement of Archivability Check (MM_EINA)
ARC_MM_EINA_WRITE BAdI: Enhancement of Scope of Archiving (MM_EINA)
ARC_MM_INVBEL_CHECK BAdI: Enhancement of Archivability Check (MM_INVBEL)
ARC_MM_INVBEL_WRITE BAdI: Enhancement of Scope of Archiving (MM_INVBEL)
ARC_MM_MATBEL_CHECK Prüfung ADD-ON-spezifischer Kriterien für MM_MATBEL
ARC_MM_MATBEL_WRITE Check Add-On-Specific Data for MM_MATBEL
MB_CHECK_LINE_BADI BAdI: Check Line Before Copying to the Blocking Tables
MB_CIN_LMBMBU04 posting of gr
MB_CIN_MM07MFB7 BAdI for India Version exit in include MM07MFB7
MB_CIN_MM07MFB7_QTY Proposal of quantity from Excise invoice in GR
MB_DOCUMENT_BADI BAdIs During Creation of a Material Document
No.of Exits: 8
No.of BADis: 29
Hope these things use ful to you.
Thanks! -
Search help for Standard Screen
Hi folks,
I have to keep F4 help for field 'Goods Receipt' in the stnadard TCode MIGO. Do we need to use any Exit or is there any other way to do so like configuration settings in SPRO...Pls suggest me how can i acheive that one..
Thanks,
Shyam.Hi,
Check the following exits. these all are for Migo tCode.
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
Search for appropriate exit wchich meets your requirement.
Regards
Rajesh Kumar -
Search Help for Standard fieldBSEG-ZUONR
Hi Guys,
I am working on the standard transaction FB60 for vendor invoice posting.In this transaction item level we have the field Assignment Number BSEG-ZUONR.
I need to provide the search help for this field.In SAP we don't have search help for this field.
Please suggest me the best way to provide the search help for this.
Is it possible to provide the search help through the transaction variant.
Regards,
Ramesh
Moderator message - Cross post locked
Edited by: Rob Burbank on Jun 19, 2009 9:51 AMHi,
May be you can refer to the following link
[Search help enhancement in VA01;
Regards,
Mahesh -
Search help for standard field BASEG-ZUONR
Hi Guys,
I am working on the standard transaction FB60 for vendor invoice posting.In this transaction item level we have the field Assignment Number BSEG-ZUONR.
I need to provide the search help for this field.In SAP we don't have search help for this field.
Please suggest me the best way to provide the search help for this.
Is it possible to provide the search help through the transaction variant.
Regards,
RameshHi,
May be you can refer to the following link
[Search help enhancement in VA01;
Regards,
Mahesh
Maybe you are looking for
-
hi all i have this query in which i have used ansi joins,not an expert though on ansi joins ...got to knw abt ansi joins only today SELECT abc.vendor_number, abc.vendor_name, api.invoice_amount, api.invoice_date, api.invoice_type_lookup_code,
-
Why does my new PSE12 crash after about 1 minute?
I used PSE8 for several years successfully, on a desktop running WinXP. Always reliable, if a little slow backing up etc with my huge (75K images) catalog. My brand new desktop now runs Win7, 64 bit. It is a high-spec machine. I bought PSE12 and conv
-
I detected a change in the behaviour ot the Print VI To HTML Invoke node when using the Custom format and going from LV 7.1.1 to LV8.x. In LV 7.1.1 I get a horizontal line and a header before each section, e. g Horizontal Line Connector Pane In LV 8.
-
How the packaging material is treated in PGI
Guru , i have done PGI for a material with a packaging material which consistutes a handling unit . ie handling unit= materaial + packaging material . when i did PGI , maetrial is shown in the storage location as reduced qty . fine . where is the pac
-
Query on Nokia 820 Camera/Flash
Hi I have a Nokia 820 - it is a great phone and I love it. I have had it for the last 6 months but I noticed a couple of things lately. When I use the camera and take a picture, sometimes the screen blacks out and you cannot take another picture wit