F4 help in DDIC

hi all,
I have tried to set f4 help in the particular field in Ztable .
My requirement is whenever i enter the value in field (Ztable) via table entries in databrowser i need f4 help.
I know there is oneway to get this to set foreign key.
but,I have seen search help button in DDIC.
how to i set the f4 help to use this button.
thnks and rgds,
raghul
Edited by: raghul kanna on Jul 13, 2008 2:38 PM

hi ,
To Create Search Help you need to follow these steps.
go to SE11 ,
->click on Search help radio button
->give a search help name , then Click on Create
-> a pop up will appear , choose 'Elementary search help'
->give ur master table name in ' Selection method '
->in 'Search help parameter name' specify ur field name on which u want to create Search help
->also click on import and export checkbox,
->specify LPOS and SPOS . Then press ENTER.
->you will get the Data element name of ur trasp table in the dataelement field.
Save,check,activate.
click Database Table:ZXXXXX.
click on Tab-Entry Help/Check ->Give Search Help name in Search help field.
Save, check n Activate.
Reward points , if useful to you
with regards,
sharmista.

Similar Messages

How to replace a field's search help of DDIC in FPM feeder class?

Hi All,
I want to replace a field's search help in DDIC structure, for an example, in structure HCMT_BSP_PA_XX_R0009, the field BANKL(Bank Keys) has a search help named 'H_BANKL', I want to replace this search help with other one such as 'H_BANKEY' in the FPM feeder class CL_HRESS_PER_DETAIL, I redefined such method:
method if_fpm_guibb_form~get_definition.
field-symbols: <fs_field_description> like line of et_field_description.
call method super->if_fpm_guibb_form~get_definition
importing
es_message = es_message
eo_field_catalog = eo_field_catalog
et_field_description = et_field_description
et_action_definition = et_action_definition
et_special_groups = et_special_groups
ev_additional_error_info = ev_additional_error_info.
read table et_field_description assigning <fs_field_description> with key name = 'BANKL'.
set search help name of field 'bank key'
if <fs_field_description> is assigned.
<fs_field_description>-ddic_shlp_name = 'H_BANKEY'
endif.
endmethod.
I test it and found the search help window was replaced indeed, but all the value of import/export parameters in the new search help was lost, it means, the value of import paramer BANKS(Bank country) and the export parameter BANKA(bank name) were lost. Only the value of BANKL itself can be returned by the new search help window. Can you give me some suggestions about how to maintain the link( value exchange) between structure HCMT_BSP_PA_XX_R0009 and dynamically defined search help 'H_BANKEY' in FPM feeder class?
I tried to use sap memory ID but it doesn't works well.

This question was answered at [Webdynpro Forum|how to replace a field's search help of DDIC in FPM feeder class?;:
That is because for the import and export of DDIC Search help values to work in WDA, not in FPM layer.Feeder Class can do nothing about it.

Howto limit options in search help for DDIC element LANGU (language)?

Hi all,
in my application I have an input field for a language parameter. Of course the standard search help (F4) opens a popup with all possible languages (registered in system). Now I want to limit these languages in the popup to only a few I want.
Is it possible to programmatically do this in ABAP, or do I have to copy the DDIC element and create an EXIT for the search help?
Thanks in advance for your help.
Kind regards, Matthias

Matthias F. Brandstetter,
You can do search help in 2 ways.
1.
You can copy existing one and make changes to that and add that to the field for which u want to.
2.
check the search help which tables are being used.if you know the tables , u can write search help using ABAP.
Check the procedure.
1.F4 help for field on the screen.
   Event used.
PROCESS ON VALUE-REQUEST.
FIELD P0016-ZZ_CONTR_TYP module f4_for_contr_type..
2.F4 help for field on selection-screen.
Event used
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FIELD p_contr_type.
g_progname = 'MP001600'.
g_scr_num   = '2000'.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield        = 'ZHRPAE_CONTRTYP' "--> Field on F4 popup window
      dynpprog        = g_progname
      dynpnr          = g_scr_num
      dynprofield     = 'P0016-ZZ_CONTR_TYP' "--> Field on the screen
      value_org       = 'S'
    tables
      value_tab       = i_zhrpat_contrtyp1 "-->Data that is displayed on F4 help
      return_tab      = i_ret_values           "-->This contains selected record
                                                               properties
    exceptions
      parameter_error = 1
      no_values_found = 2
      others          = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
      with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else .
" Read table i_ret_values with index 1.
    read table i_ret_values into w_ret_values index 1.
    p0016-zz_contr_typ = w_ret_values-fieldval.
endif.
I hope that it helps u .
Regards,
Venkat.O

Simple transformation with reference to ddic structures

Hi, experts,
we decide to use xml as the format when exchanging massive data with other applications. and we want to use simple transformation because according to the document it's more fast.
actually our file structure is determined by certain ddic structures, one xml file main contain several ddic structures , and they are all flat one, not deep structure.
the xml file may look like this:
<data>
<ddic1>[components of ddic structure 1 ]</ddic1>
<ddic2>[components of ddic structure 2 ]</ddic2>
</data>
i am new to ST,i am wondering that is it possible to make the ST more easy with the help of ddic structure? do i still need to declare the components one by one in the ST program?
BR.
jun

It only runs ok with 2 internal tables because of the way you set up the XML string. It will run ok with 3 internal tables too. If you strip out the '<C>' nodes or move the '<C>' nodes around, you'll see what I mean (move the C nodes to the last B node). Each time you start a loop in a simple transformation, the internal table is initialized. So, you need to form your sample XML string differently, declare your internal tables differently (nested), or use XSLT for a little more power.

Search Help for input field2 based on value entered in input field 1

Hi All,
I have a requirement where in my view, i have two fields.
1. PO
2. PO Item
For PO i could get the standard search help from DDIC, but i need to provide search help for PO Item based on PO selected.
How can i do that. Any help is highly appreciated.
Thanks,
Ajay

Hi Ajay ,
following steps cn help u :
1 Declare the WDR_OVS Component in the used component list in your WD component .
2 Now go to the View, in the Properties Tab click the Create Controller Usage Button.
3 It will open a screen with Component Use Entries. There select the Component Use OVS with Interface Controller . Press Enter.
4 Go to the Context Tab, Right Click the Context and select Create à Attribute , for PO item in ur case .
5 In the Input Help Mode Field, Select u2018Object Value Selectoru2019 from the dropdown. Then press F4 in the Field OVS Component Usage.
6 Declare one event handler method with Name ON_OVS in the Method tab of the view. Then Press F4 in the Column Event.
Select the Event OVS as shown below and Press Enter.
for more info and illustration , also refer :
http://help.sap.com/saphelp_erp2005/helpdata/EN/30/d7fa41c915da6fe10000000a1550b0/content.htm
https://wiki.sdn.sap.com/wiki/display/WDABAP/ABAPWDObjectValueSelector(OVS)
http://wiki.sdn.sap.com/wiki/display/Snippets/OVSSearchHelpinWebDynproAbap
regrds,
amit

Search help on a field with value range

Hi,
I have a z-table. One of its fields has a z-data element with z-domain which has a value range. I have a requirement to add a search help on selection screen field which is parameter for mentioned field of my z-table. How can I do that?
Tnx in advance,
Nati

Hi,
Where you want to add the search help, i mean in report or in screen painter.
In Screen painter, you can take the reference of Z-Data Element by Dictionary option in Screen layout.
If it is report, you can use F4 function module(F4IF_INT_TABLE_VALUE_REQUES) or can creat the elementary search help in DDIC and give it as MATCHCODE OBJECT in PARAMETER statement.
Regards,
Chandu

Multiple Selection in F4 help

Unlike BSP, WebDynpro have a very nice integration of F4 helps from DDIC.
I wonder if F4 helps also support multiple selection.
So, can the user select multiple lines in the result list, and transfer all back to the calling screen?
How can I switch this on in the F4 help? By setting the cardinality of the context node?
How is the selection transferred back to the calling screen?
Must there be a table with multiple editable lines, into which the selected elements are transferred? Or can retrieve the selected elements programmatically?

Hi daniel ,
You can do your requirement in one more way by implementing the Search help exits .
For eg :
Search Help PREM will give the list of Employee , but you want only the employee with the status 'Active ' in this case you can create a serch help exit .
Create seach help exit.
Take z copy of Function module F4IF_SHLP_EXIT_EXAMPLE .
Declare all the Parameters "see some example by using where used list
inside that FM you can find the piece of coding . uncommend thePerform and write your logic inside the perform
IF CALLCONTROL-STEP = 'SELECT'.
   PERFORM STEP_SELECT TABLES RECORD_TAB SHLP_TAB
                       CHANGING SHLP CALLCONTROL RC. " write your logic in this perform
   IF RC = 0.
     CALLCONTROL-STEP = 'DISP'.
   ELSE.
     CALLCONTROL-STEP = 'EXIT'.
   ENDIF.
    EXIT. "Don't process STEP DISP additionally in this call.
ENDIF.
For formatting your Result internal table . pass your final int table to below mention FM
*Formating the result table
CALL FUNCTION 'F4UT_RESULTS_MAP'
* EXPORTING
*   SOURCE_STRUCTURE         =
*   APPLY_RESTRICTIONS       = ' '
TABLES
    SHLP_TAB                 = p_shlp_tab
    RECORD_TAB               = p_record_tab
    SOURCE_TAB               = LT_PA0002   " Final internal table
CHANGING
    SHLP                      = p_shlp
    CALLCONTROL              = P_CALLCONTROL
EXCEPTIONS
   ILLEGAL_STRUCTURE        = 1
   OTHERS                   = 2
For mor information on Search Help Exit Refer the bellow link
http://help.sap.com/saphelp_bw/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on May 26, 2010 6:43 PM
Edited by: chinnaiya pandiyan on May 26, 2010 6:47 PM

Questions on ABAP

Hi experts,
Here are some questions for u pls send answers asap.
1.     What are the exceptions in function module?
2.     What is Return code?
3.     What are the interface programs we have?
4.     What is the typical structure of ABAP/4 Program?
5.     How can we make the user to get satisfaction while developing the code?
6.     What is production order report?
7.     Generally What are the objects we have to develop in end to end full life cycle implementation project w. r. to SD and MM functional modules?
8.     How can u find a required exit , include and form routines in an user exit ?
9.     What is the difference between SMOD and CMOD ?
10.     What is the difference between AT NEW and ON CHANGE OF ?
11.     We have two fields Customer and Batch in selection screen. If we select Batch field down arrow button( for F4 help) we will get a popup with possible values.
      To get that What code we have to write and where?
12.     Explain SD Flow?
13.     Can we only process synchronously in CALL Tr. Cant we process in asynchronous? Actually What is processing?
14.     Can we use only one application at a time in CALL Tr. ?
15.     If we have a data in integer and numeric format in flat file , is it possible to upload data or not ? if yes how?
16.     Technical specs preparation comes under blueprint phase or Realization phase?
17.     In which phase a developer can work ?
18.     While handling a Tabstrip Report, Where we have to maintain selection screen of each tabstrip report? Wheather it is in source code or in screen painter? Explain in detail with one tabstrip report which is having different tabs in selection screen?
19.     In which event we have to write SET CURSOR FIELD logic in a report?
20.     How can u add different tabs in a report?
21.     Hoe can u handle a tabstrip in areport?
22.     Explain Cluster and Pooled Tables with definitions and what is the advantage of cluster and pooled tables?
23.     What is the structure of VIEW?
24.     How we provide F4 help in DDIC? What are steps (Navigation)?
25.     What is primary key and foreign key. What they will do?

Did you get the job then? :o)
Kind regards
Ash Thomas
<a href=http://www.ashthomas.com>Sap Abap Developer & Sap Abap Programmer</a>
<a href=http://www.ashthomas.com>www.ashthomas.com</a>

F2 on Popups? (Or how to get the Component if F2 is not working)

Hello Experts,
I wonder if somebody has a tip how to get the component of popups?
The F2 Help is not working there.
The Popup I'm actually looking at is called by a button. Is it possible to find out the called component by looking at the button Event? (I have tried - but the source does not tell me any component)
Thanks for answers...
Regards
Chris

Chris,
F2 should definitely work if it is a UI component.
You see pop ups on button clicks and F4 value helps. F2 should work in these cases.
For some attributes with F4 help, a DDIC search help is attached. Here F2 does not work.
Anyhow to find out which component it is calling, you use this method
check in the event handler(for button pop ups) or in the outbound plugs specifies in GET_V method(for F4 pop ups) if there is a code like
CALL METHOD comp_controller->window_manager->create_popup etc.,
A Component Usage will be passed to the method. You can check for the component usage in the Run Time Repository.
You will get the component details.
Regards,
Masood Imrani S.

F4 help on Parameter for ddic domain does not work

Hello,
I try:
Parameters: pa_waers TYPE WAERS.
WAERS is a ddic data element for currencies and also a domain with this name exists. The domain WAERS has a check table TCURC.
When I press F4 for my field PA_WAERS in the Selection Screen, I assume a value help from the check table TCURC.
I activated and re-generated my coding (as mentioned in the ABAP-Keyword help for "PARAMETERS") but it still does not work.
Does anybody has a clue why this does this not work.
The same thing is for a parameter:
Parameters ..... type CTU_MODE.
Domain CTU_MODE has value Fields (A, E, B) but also here on my program no F4 help occurs.
Thanks in advance
Stefan Berger

A value table is assigned to a domain. It becomes a check table when a foreign key relationship is established for a field in a table. The field uses the data element and the data element uses the domain.
For example, if you try:
PARAMETERS: PA_WAERS TYPE EKKO-WAERS.
You will get the F4 help you are looking for. If you use tran SE11 and view EKKO, find field WAERS, use tab Entry Help/check and you will see that table TCURC has been established as a check table. You can use the foreign key button to see the relationship that has been established between EKKO and TCURC.
Also, domains cannot be used to type a field. Your reference to CTU_MODE must be referring to a Data Element. I tried this in a 4.7 system and the F4 works for me. What version are you using?

Calling DDIC search help

Hello
Is it possible to call a DDIC search help within a WD application without binding it to an input field. We are looking for a way to call a search help on a button pressed event.
Regards, Mathias

Hi Mathias,
Using CL_WDR_VALUE_HELP_HANDLER=>HANDLE_VALUE_HELP is a very easy solution to this problem but, you are advised not follow this approach of using this class & method as they may be stopped at any time by SAP. All the classes which start with CL_WDR* are meant for internal use by SAP and are not meant for use by customers. We are supposed to use only classes which start with CL_WD*. Try go through this [thread |CALL SEARCH HELP IN WEB DYNPRO;which deals with the same same issue.
You can try resolve this problem by creating an [Freely Programmed Value Help|https://wiki.sdn.sap.com/wiki/display/WDABAP/Freely%2bprogrammed%2binput%2bhelp] & when you press on the pushbutton you can call this search help. You can try go through this [thread |freely programed F4 help;where I have explained about how you can create an Freely Programmed value help.
Regards,
Uday

Search help - DDIC

Hi Folks,
My Scenario is :
I Have a table with 3 columns with associated context node (3 attributes) which referes to a Dictionary structure.
I have created a Seachhelp and associated it to the first attr' which gets back a popup with 3 columns, Now when I select any from here it should reflect back those values to the corresponding fields in to this table, i.e, 3 col's should fill with the respective data from the Popup fields.
How can I do it ?

Hi,
I meant it was the easiest way (in wda)
else you need to define the searchhelp on your structure, with the export parameters
set to your structure elements, in your node use this structure as ddic type,
then the fields should be supplied with the values
(make sure the structure definition and search help binding of the parameters is done correctly)
grtz,
Koen

Help: DDIC Lock object

Hi All,
I have doubt about lock object,
when we create lock object ENQUEUE_OBJ AND DEQUEUE_OBJ also gets created but what about transporting it? should we transport it saparately or automatically its get transported?
Thx.

Check the below link
[http://help.sap.com/saphelp_nw70/helpdata/en/cf/21eef3446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/cf/21eef3446011d189700000e8322d00/content.htm]
When you save a lock object, it will ask for a trasport request to be saved under. Once that is given, the generated FMs ENQUEUE_<lockobjectname> and DEQUEUE_<lockobjectname> are also saved under the same transport request.
1. Check your QA system whether the 2 generated FMs for the <lockobjectname> exist in QA?
2. Also check in SE11 whether <lockobjectname> exist in QA?
Hope it helps.
Thanks,
Balaji

Installation Error RFC connection with ddic user

Hi
when i am installating IDES ECC6.0 iam unable to continue the installation
due to ddic password. i have tried with master and standard password but no use.
i have tired to logon to the system using sap* user . But it also failed to logon .
could any body help me this issue.
Thanks in advance.

Hi Kumar,
When you delete the user SAP*, please make sure you also add the parameter
login/no_automatic_user_sapstar = 0 to instance profile (your need to restart the SAP instance)
As NW2004S, that parameter prevent SAP* login using PASS password.
But before you do this, please just try to delete the SAP* user first and login using PASS password, if that not work than you should add the parameter and restart the SAP.
Hope this help.
FS

IDES installation problem with DDIC password

Hello everybody,
After hours of searching and trying..
I have here a problem during a local installation of IDES ECC 6.0 on Windows Server 2008 with MAXDB. The installation stops in phase 27 of 29 u201Ccheck DDIC passwordu201D - test logon to SAP system failed, with the error message FRF-00007 "Unable to open RFC connection" in sapinst.
The MMC shows in the process list that the following processes stands oon "green": igswd, mag_Server and disp+work are running. The message of servers connection is OK, acts dialogue queue time is 0.00 sec.
I have already searched the forum, but I am not able to logon as user SAP* with u201C060. u2026u201D or as user DDIC with the password u201C199. u2026u201D to change the DDIC password to my password set during the installation (transaction -S000 / SU01). The login fails over the MMC as well as over the SAP GUI 7.10. I have tried this on the client 000, 001 and 800. The error message is u201CSAP Logon Failed - connection closed without message (CM_NO_DATA_RECEIVEDu201D). The SAP GUI gets down with "Work process restartet, session terminated".
What can help to solve the problem? Can it be a problem with the ms loop adaptor? Which static address IP must assign to the loop adaptor? Did i have to update the kernel of the data bank or is this not necessary? Can the information from dev_w help?
Can this link help me: BI 7.0 Installed but errored out during DDIC password check !!!!!!!
Thanks in advance
Lenvy
Edited by: Lenvy Gee on Sep 6, 2009 2:30 AM
Edited by: Lenvy Gee on Sep 6, 2009 2:34 AM

Good Morning everybody,
I started a next try, the mmc is running on green, the login starts up and......failed.
So the network setting seems to be correct.
The log files included following:
..........................................(just the last lines).............................
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server BASIS_A23_00 on host BASED (wp 0)
M * ERROR       ThSigHandler: signal
M *
M * TIME        Mon Nov 26 08:06:26 2009
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          11
M * MODULE      thxxhead.c
M * LINE        10688
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T17/U25/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U25 M0 I0 (Level 7) ok
M ThIErrHandle: prv_action of W0: 0x8
M ThCallDbBreak: use db_sqlbreak
C CANCEL rejected, because there is no SQL statement active
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
M ThContextId: context_id = >0001700020019C010D31F2D5BD12D1714B103838<
M ThContextId: context_id_uuid = {29019C01-7F24-F235-BD12-D1714B103838}
M ThGetTransId2: got trans id (spa) >29019C017F24F239BD12D1714B103838< (32)
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000000F67D3C8/0000000000000000/0/0/1
M RmCleanUpResources3: no resources registered
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: ThrCoreInfo o.k.
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T17/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
B Disconnecting from ALL connections:
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       YES YES NO 000 255 255 20401126 080533 BASIS
C Disconnecting from connection 0 ...
C Now I'm disconnected from SAP DB
B Disconnected from connection 0
B statistics db_con_commit (com_total=4, com_tx=0)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 816) [dpnttool.c   327]
M return from clean-up function ...
and:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        A23
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    144
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2928
Mon Nov 26 08:03:01 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2928) [dpxxdisp.c   1243]
     shared lib "dw_xml.dll" version 144 successfully loaded
     shared lib "dw_xtc.dll" version 144 successfully loaded
     shared lib "dw_stl.dll" version 144 successfully loaded
     shared lib "dw_gui.dll" version 144 successfully loaded
     shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Nov 26 08:03:10 2040
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >BASIS_I23_00                            <
DpShMCreate: sizeof(wp_adm)          25168     (1480)
DpShMCreate: sizeof(tm_adm)          5652128     (28120)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000D800050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000D800050
DpShMCreate: allocated wp_adm at 000000000D802150
DpShMCreate: allocated tm_adm_list at 000000000D8083A0
DpShMCreate: allocated tm_adm at 000000000D808400
DpShMCreate: allocated wp_ca_adm at 000000000DD6C2A0
DpShMCreate: allocated appc_ca_adm at 000000000DD72060
DpShMCreate: allocated comm_adm at 000000000DD73FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DDFAC30
DpShMCreate: allocated gw_adm at 000000000DDFACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DDFACE0
DpShMCreate: allocated wall_adm at 000000000DDFACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 4093MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 4096MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
***LOG Q0K=> DpMsAttach, mscon ( BASIS) [dpxxdisp.c   11822]
DpStartStopMsg: send start message (myname is >BASIS_I23_00                            <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Nov 26 08:03:11 2040
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Mon Nov 26 08:03:17 2040
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Nov 26 08:04:26 2040
SoftCancel request for T17 U18 M0 received from IC_MAN
SoftCancel request for T19 U20 M0 received from IC_MAN
ERROR => DpWpKill(3092, SIGUSR2) failed [dpxxtool.c   2496]
Mon Nov 26 08:04:30 2040
ERROR => DpHdlDeadWp: W0 (pid 3200) died [dpxxdisp.c   14532]
Mon Nov 26 08:04:31 2040
ERROR => DpHdlDeadWp: W1 (pid 3220) died [dpxxdisp.c   14532]
DpHdlDeadWp: restart wp (pid=3092) automatically
ERROR => DpHdlDeadWp: W3 (pid 3296) died [dpxxdisp.c   14532]
DpHdlDeadWp: restart wp (pid=3268) automatically
ERROR => DpHdlDeadWp: W10 (pid 2032) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W15 (pid 3312) died [dpxxdisp.c   14532]
Mon Nov 26 08:04:45 2040
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6971]
Mon Nov 26 08:05:10 2040
ERROR => DpHdlDeadWp: W4 (pid 3260) died [dpxxdisp.c   14532]
Mon Nov 26 08:05:30 2040
ERROR => DpHdlDeadWp: W0 (pid 3788) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W1 (pid 2108) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W6 (pid 3108) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W15 (pid 464) died [dpxxdisp.c   14532]
Mon Nov 26 08:05:33 2040
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6971]
The kernel is not patched. I just (try) to install the kernel files from the sap market place
IDES download destination. The install kernel file was: 51033508_7 - NW7 SR3 Kernel 7.00 for Windows / LNX X86_X64. I got an update / upgrade file, which is called: 51033508_8 - NW7 SR3 Kernel .... Upg ABAP.
Can anybody give me an adwise by reading those logfiles? Is the file ok for updating the kernel?
How do I upgrade the kernel by having no .exe - file? May the installation go on after patching the kernel?
Thanks you really much
Lenvy

F4 help in DDIC

Similar Messages

Maybe you are looking for