F4 help issue with Webdynpro ABAP application

Hi,
I am facing a strange issue with the F4 help in my webdynpro abap application.
I have few fields for Purchase Order and Line item on the screen and they have corresponding F4 helps associated with them.
When i select for F4 help, sometimes the screen simply blanks out and a white screen is displayed. When i refresh the screen and try the same scenario again, i can see the value list correctly.
This issue occurs very randomly with no specific pattern. If anyone else has faced this issue earlier, kindly let me know how to get rid of this issue.
Any pointers to resolve this issue will be helpful.
Note: I am using SAP version 702 SP09.
Thanks,
Ramanath

Hi,
we cannot help you from offline, you need to check the standard procedures like
SICF->is your application node is active.
FQDN->check fully qualified name is configured
You can also try to execute standard SAP application, if sap application also has problem running then you may have to get the help of BASiS people to look into that and raise a support ticket.
If sap applications are running and your custom developed applications are not running then look into this application if there is any URL parameters need to supply etc.

Similar Messages

  • How to Integrate HCM Process with Webdynpro ABAP Application

    hi,
    I have issue regarding how to integrate HCM Process with Webdynpro abap application.
    I had created one HCM process for transfer using Hrasr_dt T code and also created form scenario and work flow.
    How to Integrate HCM Process with Webdynpro ABAP Application
    by
    Parthasarathi

    hi suhasini,
    Thanks for your reply,
    Can u explain in detail.. and Give any documents or links...
    by
    Parthasarathi

  • Help Link in Webdynpro Abap Application.

    Hi,
    I have Created one webdypro Application. For that i need to implement the F1 help. For Implementing the F1 Help, I have created the RFC Destination Aio_for_help_links .
    1. I need to check if Knowledge Warehouse is implemented in the System. How do I go with this?
    2. How do I connect the created RFC Destination to the Knowledge Warehouse.
    I have referred to this link for the creation of F1 help in WD Application.
    http://help.sap.com/saphelp_nw04s/helpdata/en/44/336208da18060be10000000a155369/frameset.htm
    Regards
    Bala..

    Hi Pradeep,
    Create a search help with the values you require in se11 transaction.
    Then assign this search help to the context attribute of your field. This should work.
    Assignment is done in the same place that you set cardinality etc.
    I don't have access to a system right now, so can't give precise details.
    Let me know if you require more help.
    Cheers,
    Mz

  • Open Webdynpro ABAP application from UWL

    Hello Experts,
    The requirement is we need to open the Custom Webdynpro ABAP application when the user clicks on the UWL tasks instead of ITS based screen.
    We have created a custom workflow task. Then we maintained the task entry with Webdynpro ABAP application name in SWFVISU transaction.
    After re-registering the UWL connector in Portal I could not find the Task ID in UWL definition. In UWL the task item is visible but could not open the task because the UWL could not identify the task no for this.
    Am I missing something in the above steps?
    Kindly help.
    Kind Regards,
    Nirmal Sivakumar G

    Any thoughts on this issue guys?

  • Call WebDynpro Abap application with trasaction

    Hello Experts,
    can I call my WebDynpro Abap application with a trasaction ?
    Regards
    sas

    hi,
    Go through this link
    [****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
    Hope it will help you.
    Regards,
    Rohit

  • Issue on Creating RFx in webdynpro ABAP application - SRM Business Package

    Hi
    We are in to SRM 7.0 with the same version of Business Package in SAP Portal also.
    I am trying to create a RFx from Portal which in turn calls the webdynpro ABAP application (Strategic Purchasing->Strategic Sourcing->Create Documents->RFx)
    sap/bc/webdynpro/sapsrm/wda_l_fpm_oif.
    This Application has some button called "Tech RFx", "Permissions" etc., When I click on those buttons it throws the error as below :
    "There is no iView available for system "SAP_SRM": object "TechResp". For more information, contact your administrator."
    Please let me know where we are missing. I have checked all the Portal permissions. Even I can able to access all other iviews except this two buttons.
    Any settings or parameters required on webdynpro ABAP side.
    Regards,
    Raja.J

    Dear Raja,
    this behavior occurs if the IView com.sap.pct.srm.gp.iv_tech_resp
    is not assigned to the role which is assigned to the user.
    Please assign this IView to the desired user.
    Here are the steps to follow in your systems:
    STEP 1: Login to the Portal with Content Admin Authorization.
    STEP 2: Navigate to Portal Content -> Content Provided by SAP ->
    specialist -> SRM7.0 -> Core -> Roles -> Open the desired role and
    choose Navigation Folder.
    STEP 3: Now navigate to Portal Content -> Content Provided by SAP ->
    specialist -> SRM7.0 -> PPS -> iViews -> Tendering -> Select Tech
    Responses (Technical name is iView com.sap.pct.srm.gp.iv_tech_resp) and
    right click and choose 'Add iView to Role' -> Delta Link and save.
    STEP 4: Log off and login with the user and check the issue.
    Best regards,
    Tamas

  • Webdynpro ABAP application integration with portal

    Hi,
          Can someone provide me the complete documentation for
           1. webdynpro ABAP application development and
           2. webdynpro ABAP application  integration with enterprise  portal.
    Thanks...
    Kundan

    hi Kundan ,
    design pattern or paradigm followed by Webdynpro ABAP is
      MVC concept
               M-Model
               V- View
                C-Controller
    and cms with the advantages like Structuring the programming
         Creation of easily manageable application blocks
         Reusability of whole components
    for more documentation about WD ABAP , refer
    http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/3545415ea6f523e10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/sdn/nw-ui?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
    SAP netweaver provides the integrationof ESA , for integartion netweaver provides us wid the People Integartion
    refer
    http://help.sap.com/saphelp_nw70/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
    as well
    I hope it helps
    rgds,
    amit

  • WebDynpro ABAP application issue from Portal after ECC 6 upgrade to SP14

    Hi,
       We have recently upgraded the Kernel, ABAP and Java stack of ECC 6.0 system to SP14. After the upgrade most of the WebDynpro ABAP applications doesn't load and just flickers when run from Portal as a WebDynpro iView, but they run perfectly fine when accessed directly using URL. These were running fine prior to the upgrade. Can someone suggest what can be going wrong.
       Will reward points for helpful answer.
    Regards
    Mukesh

    Hi Mukesh,
    As Gajendra said, restarting the service in SICF sometimes works for us, but not always.  We have also had to deactivate the entire Webdynpro node, and then reactivate it and all of the services below it.
    Obviously something changed in the SP, given that we now have to do this every time we create a new WDA application.
    Cheers,
    John

  • Iview for Webdynpro ABAP application with TimedTrigger

    Hello,
    I created an IView  for a WebDynpro  ABAP  application. This application uses a UI element TimedTrigger. Without portal integration this TimedTrigger works fine. Inside an IView  this TimedTrigger element does not work anymore. Did anyone have a similar problem? Does anyone have a solution for this?
    Thanks and regards
    Marc

    hi,
    Go through this link
    [****************/Tutorials/WebDynproABAP/TransactionCode/Create.htm]
    Hope it will help you.
    Regards,
    Rohit

  • When m testing webdynpro abap application m getting this error  help me to get solution

    hi all,
    when m testing webdynpro abap application m getting this error  help me to get solution.
    plz find the screen shot

    Hi
    I think you are using the IDES system, Can you check the services in SICF transaction. If the service is not activated you activate it again.
    In this path you will find  in the below path and try to check/activate the services relevant to the WDA stack.
    sap/bc/webdynpro/sap

  • [HELP] Webdynpro Abap application keeps refreshing on Portal

    Hello Gurus,
    Im facing a really annoying and weird problem, i've created a screen exit on the transaction IW21, on this screen i have a custom container, and im using the class cl_gui_html_viewer to show off a webdynpro abap application on this container. If i access IW21 via SAP GUI everything works fine, no problema at all. But once we've published this transaction IW21 on Portal something very weird happened, the webdynpro application keeps refreshing on every action done in the screen. I've entered on debug mode to verify if the program is performing the code to create the html object again, but the program pass in the perform only once. An example: when i click in save the program pops a screen to choose some characteristics and i can clearly see the webdynpro application refreshing under this screen, like if i press F5 on browser. As i said everything goes pretty much fine in SAP GUI, but in Portal keeps refreshing.
    Anyone have any idea how can i solve this?
    Regards,
    Rafael

    Are you calling ITS transaction and Webdynpro application is within this transaction?
    Regards,
    Nitesh

  • Error in opening webdynpro abap application

    hi All,
    I am facing below issue in opening webdynpro abap application, this is first WDA application in production system, please help me in resolving this issue.
    ============================================================================
    Error when processing your request
    What has happened?
    The URL http://grp.mysap.pg.com:9500/sap/bc/webdynpro/sap/zgpuvstapp/~ucfLOADING was not called due to an error.
    Note
    The following error text was processed in the system GRP : A request for server adln5412 has been sent to server adln5411; see Note 1364846
    The error occurred on the application server adln5411_GRP_10 and in the work process 3 .
    The termination type was: ERROR_MESSAGE_STATE
    The ABAP call stack was:
    Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system GRP in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server adln5411_GRP_10 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server adln5411_GRP_10 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 400 -u: BS6402 -l: E -s: GRP -i: adln5411_GRP_10 -w: 3 -d: 20100929 -t: 140306 -v: ERROR_MESSAGE_STATE -e: A request for server adln5412 has been sent to server adln5411; see Note 1364846
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    ============================================================================
    Edited by: brahmanandam ausali on Sep 30, 2010 4:11 AM

    Hi Shibli,
    I'm facing the same issue with the POWL only if called from a part of the network outside our country (Italy) so I think it would be a network configuration problem as you suppose. Can you explain us the configuration of the balancer and dispatcher to solve the issue?
    Thanks
    Mattia

  • How to Call the RFC in Webdynpro abap application

    Dear Experts,
    Good Evening to all...
    I have to add two numbers using RFC in webdynpro abap application. If we give the numbers in the input screen then the RFC should add it and give it in the output screen. This is the application for that I have created the RFC.
    But the problem is i don't know how to call the RFC in that Webdynpro abap application and how to link the input view and output view with that RFC...? I am new to Webdynpro abap. Please kindly help me on this... I am struggled here... I need your help in this....
    Thank You.

    Hi Jaga,
    You asked the same question again.
    Without closing the [previous one|Re: Where SAP store the uploaded files?].
    I think Abhi has answered your question.
    If not please elaborate on the problem.
    The solution btw is to create a Service Call.
    Sumit

  • Webdynpro abap application attached to SWFVISU is tested from se80

    hi,
    when webdynpro ABAP application is attached to workitem in SWFVISU the the workitem id is passed via url when calling the application. (though the url seen in the application in se80 in the webdynrpo abap component does not have workitem id paramter)
    [link1|http://forums.sdn.sap.com/thread.jspa?threadID=1209159]
    [link2|http://forums.sdn.sap.com/thread.jspa?threadID=226957]
    [link3|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6?QuickLink=index&overridelayout=true]
    I am running this application from se80 - application - right click - test. (this is required to troubleshoot one of the issues.)
    at this time it does not ask for workitem id and directly runs the application . It picks the same workitem id everytime. I tried doing this with a couple of different user ids. but I cant figure out from where it picks this particular workitem id. the status of this workitem is complete in the system.
    thanks
    bhakti

    Hi-
    (though the url seen in the application in se80 in the webdynrpo abap component does not have workitem id paramter)
    It is required to have a parameter WI_ID (as an Application parameter) in your WDA. And via this Application parameter WDA will receive the workitem id, when the task is exceuted from UWL (provided configuration is done in swfvisu)
    Could you confirm, there is no Application parameter (WI_ID) in your WDA?
    It picks the same workitem id everytime. I tried doing this with a couple of different user ids. but I cant figure out from where it picks this particular workitem id
    If you defined WI_ID in Application parameter and there is an option to provide value and it seems, you have defined some value over there or other way might be in your method (inbound plug), you may gave default value to WI_ID in the parameter
    If your application is working properly from UWL and for testing purpose, you could put a breakpoint and change the workitem id, when executing from se80
    Vinoth

  • How to download a WebDynpro ABAP Application?

    Hi,
    I have created a Webdynpro ABAP application from SE80.
    now I want to move this same application to another SAP system.
    Is it possible via downloading to flat file and uploading from flat file to destination system or something like that?
    can anyone suggest some solution to this please?
    Helpful answers will be rewarded with points.
    Regards,
    Tejas

    Hi Tejas.
    Check <a href="https://forums.sdn.sap.com/click.jspa?searchID=2403670&messageID=2905500">this thread</a> out.
    Cheers,
    Sascha

Maybe you are looking for